2297bf0ef5
ldd.1, capget.2, clone.2, create_module.2, fallocate.2, futex.2, get_kernel_syms.2, get_thread_area.2, getcpu.2, getitimer.2, getpid.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_list.2, mkdir.2, mknod.2, pciconfig_read.2, pivot_root.2, posix_fadvise.2, query_module.2, sendfile.2, set_thread_area.2, setns.2, unshare.2, __setfpucw.3, a64l.3, addseverity.3, argz_add.3, bindresvport.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, ccos.3, ccosh.3, cerf.3, cexp.3, cexp2.3, cimag.3, clog.3, clog10.3, clog2.3, cmsg.3, conj.3, cpow.3, cproj.3, creal.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, des_crypt.3, envz_add.3, fdim.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmtmsg.3, fpclassify.3, gamma.3, getpt.3, getrpcent.3, getrpcport.3, getttyent.3, isgreater.3, key_setsecret.3, lgamma.3, malloc_hook.3, mempcpy.3, nan.3, netlink.3, nextafter.3, putgrent.3, remove.3, remquo.3, rpc.3, rtime.3, rtnetlink.3, setaliasent.3, setnetgrent.3, signbit.3, significand.3, sincos.3, stdin.3, tgamma.3, xcrypt.3, xdr.3, cciss.4, hpsa.4, mouse.4, pts.4, sk98lin.4, tty_ioctl.4, wavelan.4, hosts.equiv.5, rpc.5, tzfile.5, boot.7, complex.7, ddp.7, fifo.7, futex.7, icmp.7, ip.7, ipv6.7, netdevice.7, netlink.7, packet.7, raw.7, rtnetlink.7, socket.7, tcp.7, udp.7, unix.7, x25.7, sync.8: Global fix: Put copyright info at top of page, followed by blank line and LICENSE
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:11 +01:00
38f20bb911
a64l.3, addseverity.3, argz_add.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, ccos.3, ccosh.3, cerf.3, cexp.3, cexp2.3, cimag.3, clog.3, clog10.3, clog2.3, conj.3, cpow.3, cproj.3, creal.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, envz_add.3, fdim.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmtmsg.3, fpclassify.3, gamma.3, getspnam.3, getttyent.3, isgreater.3, key_setsecret.3, lgamma.3, malloc_hook.3, mempcpy.3, nan.3, nextafter.3, putgrent.3, remquo.3, rtime.3, setaliasent.3, setnetgrent.3, signbit.3, significand.3, sincos.3, tgamma.3, xcrypt.3, tty_ioctl.4, complex.7: Add LICENSE_START(GPL_NOVERSION_ONELINE)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:09 +01:00
47297adb6e
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 19:01:36 +01:00
0ab8aeecc5
Removed trailing white space at end of lines
2012-05-11 08:13:04 +12:00
e70cfff8b5
fmemopen.3: BUGS: Note inconsistent treatment of 'b' in 'mode'
...
fopen() permits, for example, both "w+b" and "wb+",
but only the latter is meaningful to fmemopen().
See http://sourceware.org/bugzilla/show_bug.cgi?id=12836
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:13 +12:00
005e6bb888
fmemopen.3: BUGS: fmemopen() doesn't correctly set file position in some cases
...
If 'mode' is append, but 'size' does not cover a null byte
in 'buf', then fmemopen() incorrectly sets the initial file
position to -1, rather than the next byte after the end of
the buffer.
See http://sourceware.org/bugzilla/show_bug.cgi?id=13151
Reported-by: Rich Felker <bugdal@aerifal.cx>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:13 +12:00
8f60b371e7
fmemopen.3: BUGS: Append mode does not force writes to append
...
Append mode correctly sets the initial offset but does
not force subsequent writes to append at end of stream.
See http://sourceware.org/bugzilla/show_bug.cgi?id=13152
Reported-by: Rich Felker <bugdal@aerifal.cx>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:13 +12:00
8154f292d8
fmemopen.3: BUGS: fmemopen() incorrectly handles size==0 case
...
If size is zero, fmemopen() fails, This is surprising behavior,
and not specified in POSIX.1-2008.
See http://sourceware.org/bugzilla/show_bug.cgi?id=11216
Reported-by; Alex Shinn <alexshinn@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:13 +12:00
84133057b7
fmemopen.3: BUGS: Note silent ABI change for fmemopen() in glibc 2.9
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:13 +12:00
360e0be298
fmemopen.3: Note details of POSIX.1-2008 specification of 'b' in 'mode'
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:13 +12:00
d8eca5853d
fmemopen.3: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:13 +12:00
0b80cf56e3
Changes, clone.2, mount.2, nanosleep.2, sigaltstack.2, statfs.2, timer_settime.2, ctime.3, fmemopen.3, nl_langinfo.3, posix_memalign.3, pthread_attr_init.3, pthread_setaffinity_np.3, pthread_setschedprio.3, pthread_testcancel.3, setjmp.3, sigwait.3, tty_ioctl.4, epoll.7, posixoptions.7, unix.7: Add section number to references to functions documented in other pages
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-11-01 08:07:28 +01:00
0a4f8b7bb4
getresuid.2, intro.2, mremap.2, open.2, poll.2, posix_fadvise.2, pread.2, remap_file_pages.2, setresuid.2, signal.2, splice.2, sync_file_range.2, tee.2, vmsplice.2, INFINITY.3, asprintf.3, assert_perror.3, basename.3, bsd_signal.3, canonicalize_file_name.3, clog10.3, crypt.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, encrypt.3, exp10.3, fcloseall.3, fenv.3, ffs.3, fmemopen.3, fopencookie.3, ftw.3, getdate.3, getline.3, getloadavg.3, getopt.3, getsubopt.3, getutent.3, grantpt.3, hsearch.3, intro.3, lseek64.3, memmem.3, mempcpy.3, mq_receive.3, mq_send.3, posix_fallocate.3, pow10.3, program_invocation_name.3, ptsname.3, putgrent.3, readdir.3, sigset.3, sincos.3, stpcpy.3, stpncpy.3, strchr.3, strfry.3, strnlen.3, strptime.3, strsignal.3, strstr.3, strverscmp.3, swab.3, sysv_signal.3, tsearch.3, unlocked_stdio.3, unlockpt.3, wcpcpy.3, wcpncpy.3, wcsdup.3, wcwidth.3: SEE ALSO: Remove redundant reference to feature_test_macros(7)
...
Reported-by: Florian Lehmann <flo.lehmann@googlemail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-10-31 06:06:58 +01:00
ea91c3fdde
faccessat.2, dprintf.3, fexecve.3, fmemopen.3, mbsnrtowcs.3, mkfifoat.3, opendir.3, stpcpy.3, stpncpy.3, strnlen.3, strsignal.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-09-22 16:59:09 +02:00
98dbe7af76
brk.2, chroot.2, faccessat.2, fchmodat.2, fchownat.2, fstatat.2, futimesat.2, getdtablesize.2, getpagesize.2, getsid.2, linkat.2, mkdirat.2, mknodat.2, openat.2, pread.2, readlinkat.2, renameat.2, setpgid.2, sigaltstack.2, symlinkat.2, sync.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, unlinkat.2, utimensat.2, vfork.2, acosh.3, asinh.3, atanh.3, dirfd.3, dprintf.3, ecvt.3, expm1.3, fexecve.3, fmemopen.3, gcvt.3, getcwd.3, gethostid.3, getpass.3, getsubopt.3, getw.3, mbsnrtowcs.3, mkfifoat.3, mkstemp.3, mktemp.3, opendir.3, posix_memalign.3, rint.3, siginterrupt.3, stpcpy.3, stpncpy.3, strdup.3, strerror.3, strnlen.3, strsignal.3, strtol.3, strtoul.3, ualarm.3, usleep.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-09-22 16:59:08 +02:00
31337f9329
fmemopen.3: Update for feature test macro changes in glibc 2.10
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-09-22 07:44:46 +02:00
84112433e2
fmemopen.3: Bug fix in example program
...
Reported-by: Walter Harms <wharms@bfs.de>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-06-11 07:38:11 +02:00
6b34fb3f5a
execve.2, pipe.2, tee.2, fmemopen.3, mq_notify.3, qsort.3: Replace use of assert() by code that checks argc
...
See http://bugzilla.kernel.org/show_bug.cgi?id=13569
As noted by Andrey:
The purpose of the assert macro, defined in <assert.h>,
is to provide a tool to check for programming mistakes
or program logic errors. However, the assert macro must
never be used to perform checks for run time errors,
since, with the NDEBUG macro defined, expressions within
the assert macro invocations are not evaluated/checked
for, resulting in behavior that was not originally intended.
...
The pages affected in the core package are
execve(2)
pipe(2)
tee(2)
fmemopen(3)
mq_notify(3)
qsort(3)
Reported-by: Andrey Vihrov <vihrov@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2009-09-28 12:46:19 +02:00
e80aa4d865
Removed trailing white space at end of lines
2009-07-25 08:51:28 +02:00
a76ca00013
fmemopen.3: NOTES: there is no file descriptor associated with the returned stream
...
Alexander Lamaison pointed out that this is not obvious
from the documentation, citing an example with passing the
FILE * handle to a function that tries to fstat() its
fileno() in order to determine the buffer size.
Reported-by: Alexander Lamaison <awl03@doc.ic.ac.uk>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2009-04-21 16:12:05 +12:00
28c1dc49ce
fmemopen.3: Relocate BUGS section to correct position
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2009-04-21 16:03:54 +12:00
abaf3cfdcf
fmemopen.3: CONFORMING TO: remove note that these functions are GNU extensions
...
That sentence is now redundant, since these functions
are added in POSIX.1-2008.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2009-04-21 16:02:24 +12:00
28d03ce9e9
daemon.3, exec.3, fmemopen.3, fopen.3, realpath.3, siginterrupt.3, strtoul.3: Minor rewordings
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2009-02-23 15:34:12 +13:00
aed04a0a89
fmemopen.3: CONFORMING TO: note that these functions are in POSIX.1-2008
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2009-02-03 09:21:18 +13:00
16625773f9
fmemopen.3: Fix VERSIONS information
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Reported-by: Petr Baudis <pasky@suse.cz>
2008-12-06 12:03:31 -05:00
4f9ea6c361
fmemopen.3: minor: wording tweak
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-12-05 22:47:22 -05:00
99111b7580
fmemopen.3: ffix
2008-12-05 22:47:22 -05:00
45906a480f
fmemopen.3: Add VERSIONS section
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-12-05 22:47:22 -05:00
3a0f269da2
fmemopen.3: Add description of open_wmemstream(3)
...
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-12-05 22:47:21 -05:00
da607ba120
fmemopen.3: SEE OPEN: Add fopencookie(3)
...
fopencookie(3) is used to implement fmemopen().
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-12-05 22:47:20 -05:00
d84d0300a5
eventfd.2, getdents.2, mprotect.2, signalfd.2, timerfd_create.2, wait.2, backtrace.3, clock_getcpuclockid.3, end.3, fmemopen.3, fopencookie.3, frexp.3, getaddrinfo.3, getdate.3, getgrouplist.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, inet.3, inet_pton.3, makecontext.3, matherr.3, offsetof.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, sem_wait.3, strftime.3, strtok.3, strtol.3, core.5: srcfix
...
s/\.R " "/\\\&/ as a way of getting a blank line after a .SS heading.
(Suggested by Sam Varshavchik <mrsam@courier-mta.com>)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-11-04 20:42:45 -05:00
9c33050447
eventfd.2, getdents.2, mprotect.2, signalfd.2, timerfd_create.2, wait.2, backtrace.3, clock_getcpuclockid.3, end.3, fmemopen.3, fopencookie.3, getdate.3, getgrouplist.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, inet.3, inet_pton.3, makecontext.3, matherr.3, offsetof.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, sem_wait.3, strtol.3, core.5: global fix: Add ".SS Program source" to EXAMPLE
...
Add ".SS Program source" to clearly distinguish shell session and
descriptive text from actual program code.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-29 14:54:23 -05:00
b43a3b301e
eventfd.2, execve.2, getdents.2, ioprio_set.2, mprotect.2, signalfd.2, timerfd_create.2, wait.2, backtrace.3, clock_getcpuclockid.3, end.3, fmemopen.3, fopencookie.3, frexp.3, getdate.3, getgrouplist.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, inet.3, inet_pton.3, makecontext.3, malloc.3, matherr.3, offsetof.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, sem_wait.3, strftime.3, strtok.3, strtol.3, core.5, proc.5, cpuset.7, mq_overview.7: Global fix: Format user input in shell sessions in boldface
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-29 14:54:23 -05:00
5497345840
fmemopen.3: ffix
2008-10-29 14:54:22 -05:00
e008cdda60
fmemopen.3: wfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-12 07:53:22 +02:00
16ee3d5694
fmemopen.3: wfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-12 07:53:22 +02:00
363e70d263
fmemopen.3: Document binary mode (mode 'b')
...
Glibc 2.9 adds support to fmemopen() for binary mode opens.
Binary mode is specified by inclusion of the letter 'b' in
the 'mode' argument.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-12 07:52:59 +02:00
33b1b47eb7
Since glibc 2.7, it is possible to seek past the end of
...
a stream created by open_memstream(). Add a BUGS section
describing the bug in earlier glibc versions.
2008-08-21 10:06:18 +00:00
3cf81850db
tfix
2008-07-18 08:37:37 +00:00
0425de01c7
s/ / /
2008-07-01 14:15:13 +00:00
f81fb4445b
s/\\'/\\(aq/
2008-06-09 15:49:35 +00:00
f8a07a2154
s/'/\\'/ to improve rendering in UTF-8.
2008-06-05 17:52:37 +00:00
31dec0c787
wfix
2008-04-23 17:03:47 +00:00
7b01461a26
s/zeroes/zeros/
2008-03-19 09:04:12 +00:00
1368e8476d
ffix
2007-12-10 15:03:27 +00:00
6a578b8823
s/dir(/handle_error(/
2007-11-19 03:25:26 +00:00
0daa9e92d0
Fix redundant formatting macros
2007-09-20 16:26:31 +00:00
c11b1abf2e
Change mtk's email address
2007-09-20 06:52:22 +00:00
52e87bbed1
Fix missing semicolon in prototype
2007-07-10 04:51:30 +00:00
097585edcb
ffix
2007-06-22 20:40:07 +00:00
Michael Kerrisk