2004-11-03 13:51:07 +00:00
|
|
|
.\" This manpage is Copyright (C) 1992 Drew Eckhardt;
|
_exit.2, access.2, alarm.2, close.2, link.2, mkdir.2, mknod.2, open.2, read.2, rename.2, rmdir.2, s390_runtime_instr.2, symlink.2, unlink.2, write.2, remove.3, charsets.7: srcfix: Tidy copyright notices
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-16 08:39:00 +00:00
|
|
|
.\" and Copyright (C) 1993 Michael Haardt
|
2014-02-21 09:28:35 +00:00
|
|
|
.\" and Copyright (C) 1993,1994 Ian Jackson
|
|
|
|
.\" and Copyright (C) 2006, 2014, Michael Kerrisk
|
ldd.1, capget.2, clone.2, create_module.2, fallocate.2, futex.2, get_kernel_syms.2, get_thread_area.2, getcpu.2, getitimer.2, getpid.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_list.2, mkdir.2, mknod.2, pciconfig_read.2, pivot_root.2, posix_fadvise.2, query_module.2, sendfile.2, set_thread_area.2, setns.2, unshare.2, __setfpucw.3, a64l.3, addseverity.3, argz_add.3, bindresvport.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, ccos.3, ccosh.3, cerf.3, cexp.3, cexp2.3, cimag.3, clog.3, clog10.3, clog2.3, cmsg.3, conj.3, cpow.3, cproj.3, creal.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, des_crypt.3, envz_add.3, fdim.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmtmsg.3, fpclassify.3, gamma.3, getpt.3, getrpcent.3, getrpcport.3, getttyent.3, isgreater.3, key_setsecret.3, lgamma.3, malloc_hook.3, mempcpy.3, nan.3, netlink.3, nextafter.3, putgrent.3, remove.3, remquo.3, rpc.3, rtime.3, rtnetlink.3, setaliasent.3, setnetgrent.3, signbit.3, significand.3, sincos.3, stdin.3, tgamma.3, xcrypt.3, xdr.3, cciss.4, hpsa.4, mouse.4, pts.4, sk98lin.4, tty_ioctl.4, wavelan.4, hosts.equiv.5, rpc.5, tzfile.5, boot.7, complex.7, ddp.7, fifo.7, futex.7, icmp.7, ip.7, ipv6.7, netdevice.7, netlink.7, packet.7, raw.7, rtnetlink.7, socket.7, tcp.7, udp.7, unix.7, x25.7, sync.8: Global fix: Put copyright info at top of page, followed by blank line and LICENSE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:51 +00:00
|
|
|
.\"
|
ldd.1, clone.2, create_module.2, get_kernel_syms.2, get_thread_area.2, io_cancel.2, io_setup.2, io_submit.2, mkdir.2, mknod.2, query_module.2, set_thread_area.2, __setfpucw.3, hosts.equiv.5, sync.8: Added LICENSE_START(GPL_NOVERSION_ONELINE)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:51 +00:00
|
|
|
.\" %%%LICENSE_START(GPL_NOVERSION_ONELINE)
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" You may distribute it under the terms of the GNU General
|
2007-06-08 09:56:56 +00:00
|
|
|
.\" Public License. It comes with NO WARRANTY.
|
ldd.1, clone.2, create_module.2, get_kernel_syms.2, get_thread_area.2, io_cancel.2, io_setup.2, io_submit.2, mkdir.2, mknod.2, query_module.2, set_thread_area.2, __setfpucw.3, hosts.equiv.5, sync.8: Added LICENSE_START(GPL_NOVERSION_ONELINE)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:51 +00:00
|
|
|
.\" %%%LICENSE_END
|
2004-11-03 13:51:07 +00:00
|
|
|
.\"
|
|
|
|
.\" Modified 1996-08-18 by urs
|
|
|
|
.\" Modified 2003-04-23 by Michael Kerrisk
|
2007-09-20 06:52:22 +00:00
|
|
|
.\" Modified 2004-06-23 by Michael Kerrisk <mtk.manpages@gmail.com>
|
2004-11-03 13:51:07 +00:00
|
|
|
.\"
|
add_key.2, chown.2, epoll_ctl.2, epoll_wait.2, execve.2, fcntl.2, get_mempolicy.2, getxattr.2, ioctl.2, keyctl.2, listxattr.2, mkdir.2, mknod.2, mmap.2, msync.2, nfsservctl.2, open.2, prctl.2, removexattr.2, request_key.2, sendfile.2, set_mempolicy.2, setxattr.2, shmget.2, shutdown.2, sigaction.2, syslog.2, truncate.2, umask.2, CPU_SET.3, atexit.3, bsearch.3, cmsg.3, err.3, gethostid.3, getmntent.3, getopt.3, iconv_close.3, inet_ntop.3, longjmp.3, lsearch.3, mcheck.3, on_exit.3, putpwent.3, regex.3, resolver.3, setbuf.3, setjmp.3, setlocale.3, setlogmask.3, sleep.3, strsignal.3, sysconf.3, undocumented.3, tty_ioctl.4, proc.5, resolv.conf.5, tzfile.5, aio.7, bootparam.7, capabilities.7, fanotify.7, inotify.7, ip.7, packet.7, pthreads.7, raw.7, signal.7, socket.7, unix.7, ld.so.8, nscd.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-05-07 06:26:32 +00:00
|
|
|
.TH MKNOD 2 2015-05-07 "Linux" "Linux Programmer's Manual"
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH NAME
|
2014-02-21 09:28:35 +00:00
|
|
|
mknod, mknodat \- create a special or ordinary file
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH SYNOPSIS
|
|
|
|
.nf
|
|
|
|
.B #include <sys/types.h>
|
|
|
|
.B #include <sys/stat.h>
|
|
|
|
.B #include <fcntl.h>
|
|
|
|
.B #include <unistd.h>
|
|
|
|
.sp
|
|
|
|
.BI "int mknod(const char *" pathname ", mode_t " mode ", dev_t " dev );
|
2014-02-21 09:28:35 +00:00
|
|
|
.sp
|
|
|
|
.BR "#include <fcntl.h> " "/* Definition of AT_* constants */"
|
|
|
|
.B #include <sys/stat.h>
|
|
|
|
.sp
|
|
|
|
.BI "int mknodat(int " dirfd ", const char *" pathname ", mode_t " mode \
|
|
|
|
", dev_t " dev );
|
2004-11-03 13:51:07 +00:00
|
|
|
.fi
|
2007-07-08 12:11:40 +00:00
|
|
|
.sp
|
|
|
|
.in -4n
|
|
|
|
Feature Test Macro Requirements for glibc (see
|
|
|
|
.BR feature_test_macros (7)):
|
|
|
|
.in
|
|
|
|
.sp
|
|
|
|
.BR mknod ():
|
2010-09-18 09:40:42 +00:00
|
|
|
.ad l
|
|
|
|
.RS 4
|
|
|
|
_BSD_SOURCE || _SVID_SOURCE || _XOPEN_SOURCE\ >=\ 500 ||
|
|
|
|
_XOPEN_SOURCE\ &&\ _XOPEN_SOURCE_EXTENDED
|
|
|
|
.RE
|
|
|
|
.ad
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH DESCRIPTION
|
|
|
|
The system call
|
2005-10-19 06:54:38 +00:00
|
|
|
.BR mknod ()
|
2014-02-05 15:28:58 +00:00
|
|
|
creates a filesystem node (file, device special file, or
|
2004-11-03 13:51:07 +00:00
|
|
|
named pipe) named
|
|
|
|
.IR pathname ,
|
|
|
|
with attributes specified by
|
|
|
|
.I mode
|
|
|
|
and
|
|
|
|
.IR dev .
|
|
|
|
|
|
|
|
The
|
|
|
|
.I mode
|
2015-04-21 12:16:14 +00:00
|
|
|
argument specifies both the file mode to use and the type of node
|
2004-11-03 13:51:07 +00:00
|
|
|
to be created.
|
|
|
|
It should be a combination (using bitwise OR) of one of the file types
|
2015-04-21 12:16:14 +00:00
|
|
|
listed below and zero or more of the file mode bits listed in
|
|
|
|
.BR stat (2).
|
2004-11-03 13:51:07 +00:00
|
|
|
|
2015-04-21 12:16:14 +00:00
|
|
|
The file mode is modified by the process's
|
2007-09-20 16:26:31 +00:00
|
|
|
.I umask
|
2015-04-21 11:52:16 +00:00
|
|
|
in the usual way: in the absence of a default ACL, the permissions of the
|
2015-04-13 17:38:52 +00:00
|
|
|
created node are
|
|
|
|
.RI ( mode " & ~" umask ).
|
2004-11-03 13:51:07 +00:00
|
|
|
|
|
|
|
The file type must be one of
|
|
|
|
.BR S_IFREG ,
|
|
|
|
.BR S_IFCHR ,
|
|
|
|
.BR S_IFBLK ,
|
2014-02-05 14:23:41 +00:00
|
|
|
.BR S_IFIFO ,
|
2004-11-03 13:51:07 +00:00
|
|
|
or
|
2007-09-20 16:26:31 +00:00
|
|
|
.B S_IFSOCK
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" (S_IFSOCK since Linux 1.2.4)
|
2008-03-19 11:56:53 +00:00
|
|
|
to specify a regular file (which will be created empty), character
|
intro.1, time.1, accept.2, bind.2, connect.2, execve.2, flock.2, getdents.2, getpriority.2, getuid.2, intro.2, ioctl.2, mincore.2, mknod.2, personality.2, ptrace.2, read.2, recv.2, select_tut.2, send.2, sendfile.2, shmctl.2, sigaction.2, signal.2, stat.2, times.2, truncate.2, umask.2, wait.2, MB_CUR_MAX.3, MB_LEN_MAX.3, argz_add.3, btowc.3, clearenv.3, clock.3, cmsg.3, end.3, endian.3, errno.3, exit.3, fgetwc.3, fgetws.3, fopen.3, fputwc.3, fputws.3, fseek.3, fwide.3, getfsent.3, getgrnam.3, gethostid.3, getipnodebyname.3, getmntent.3, getpwnam.3, getwchar.3, grantpt.3, iconv.3, iconv_close.3, iconv_open.3, insque.3, intro.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, malloc.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mkstemp.3, mktemp.3, nl_langinfo.3, openpty.3, posix_openpt.3, printf.3, ptsname.3, putwchar.3, qecvt.3, rcmd.3, readdir.3, rexec.3, rpc.3, setnetgrent.3, shm_open.3, sigpause.3, stdin.3, stpcpy.3, strftime.3, strptime.3, syslog.3, towctrans.3, towlower.3, towupper.3, ttyslot.3, ungetwc.3, unlocked_stdio.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wprintf.3, console_ioctl.4, pts.4, elf.5, filesystems.5, hosts.5, proc.5, ttytype.5, boot.7, capabilities.7, credentials.7, epoll.7, glob.7, koi8-r.7, path_resolution.7, pty.7, signal.7, suffixes.7, time.7, unicode.7, unix.7, uri.7, utf-8.7: global fix: s/Unix/UNIX/
The man pages were rather inconsistent in the use of "Unix"
versus "UNIX". Let's go with the trademark usage.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-10-12 04:45:38 +00:00
|
|
|
special file, block special file, FIFO (named pipe), or UNIX domain socket,
|
2004-11-03 13:51:07 +00:00
|
|
|
respectively.
|
2007-06-22 17:16:20 +00:00
|
|
|
(Zero file type is equivalent to type
|
|
|
|
.BR S_IFREG .)
|
2004-11-03 13:51:07 +00:00
|
|
|
|
|
|
|
If the file type is
|
2007-12-13 20:42:14 +00:00
|
|
|
.B S_IFCHR
|
|
|
|
or
|
2014-03-26 04:39:16 +00:00
|
|
|
.BR S_IFBLK ,
|
2004-11-03 13:51:07 +00:00
|
|
|
then
|
|
|
|
.I dev
|
|
|
|
specifies the major and minor numbers of the newly created device
|
2008-12-01 17:39:36 +00:00
|
|
|
special file
|
|
|
|
.RB ( makedev (3)
|
|
|
|
may be useful to build the value for
|
|
|
|
.IR dev );
|
|
|
|
otherwise it is ignored.
|
2004-11-03 13:51:07 +00:00
|
|
|
|
|
|
|
If
|
|
|
|
.I pathname
|
2007-06-22 17:16:20 +00:00
|
|
|
already exists, or is a symbolic link, this call fails with an
|
|
|
|
.B EEXIST
|
|
|
|
error.
|
2004-11-03 13:51:07 +00:00
|
|
|
|
|
|
|
The newly created node will be owned by the effective user ID of the
|
2007-04-12 22:42:49 +00:00
|
|
|
process.
|
|
|
|
If the directory containing the node has the set-group-ID
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
bit set, or if the filesystem is mounted with BSD group semantics, the
|
2004-11-03 13:51:07 +00:00
|
|
|
new node will inherit the group ownership from its parent directory;
|
|
|
|
otherwise it will be owned by the effective group ID of the process.
|
2014-02-21 09:28:35 +00:00
|
|
|
.\"
|
|
|
|
.\"
|
|
|
|
.SS mknodat()
|
|
|
|
The
|
|
|
|
.BR mknodat ()
|
|
|
|
system call operates in exactly the same way as
|
|
|
|
.BR mknod (2),
|
|
|
|
except for the differences described here.
|
|
|
|
|
|
|
|
If the pathname given in
|
|
|
|
.I pathname
|
|
|
|
is relative, then it is interpreted relative to the directory
|
|
|
|
referred to by the file descriptor
|
|
|
|
.I dirfd
|
|
|
|
(rather than relative to the current working directory of
|
|
|
|
the calling process, as is done by
|
|
|
|
.BR mknod (2)
|
|
|
|
for a relative pathname).
|
|
|
|
|
|
|
|
If
|
|
|
|
.I pathname
|
|
|
|
is relative and
|
|
|
|
.I dirfd
|
|
|
|
is the special value
|
|
|
|
.BR AT_FDCWD ,
|
|
|
|
then
|
|
|
|
.I pathname
|
|
|
|
is interpreted relative to the current working
|
|
|
|
directory of the calling process (like
|
|
|
|
.BR mknod (2)).
|
|
|
|
|
|
|
|
If
|
|
|
|
.I pathname
|
|
|
|
is absolute, then
|
|
|
|
.I dirfd
|
|
|
|
is ignored.
|
|
|
|
.PP
|
|
|
|
See
|
|
|
|
.BR openat (2)
|
|
|
|
for an explanation of the need for
|
|
|
|
.BR mknodat ().
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH RETURN VALUE
|
2005-10-19 06:54:38 +00:00
|
|
|
.BR mknod ()
|
2014-02-21 09:28:35 +00:00
|
|
|
and
|
|
|
|
.BR mknodat ()
|
|
|
|
return zero on success, or \-1 if an error occurred (in which case,
|
2004-11-03 13:51:07 +00:00
|
|
|
.I errno
|
|
|
|
is set appropriately).
|
|
|
|
.SH ERRORS
|
|
|
|
.TP
|
|
|
|
.B EACCES
|
|
|
|
The parent directory does not allow write permission to the process,
|
|
|
|
or one of the directories in the path prefix of
|
2007-09-20 16:26:31 +00:00
|
|
|
.I pathname
|
2004-11-03 13:51:07 +00:00
|
|
|
did not allow search permission.
|
|
|
|
(See also
|
2007-05-26 12:41:39 +00:00
|
|
|
.BR path_resolution (7).)
|
2004-11-03 13:51:07 +00:00
|
|
|
.TP
|
link.2, mkdir.2, mknod.2, open.2, rename.2, symlink.2, write.2, mkfifo.3: Document EDQUOT error
The return error EDQUOT is not documented in open(2), write(2),
symlink(2) etc..
Whether inodes or disk blocks are required for each function
is something I based on received wisdom and BSD documentation,
rather than tracing the code to the kernel. For symlink(2)
this certainly depends on the file system type.
This patch was previously sent to the linux-man mailing list
as an RFC in September 2010.
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-12-22 17:56:59 +00:00
|
|
|
.B EDQUOT
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
The user's quota of disk blocks or inodes on the filesystem has been
|
link.2, mkdir.2, mknod.2, open.2, rename.2, symlink.2, write.2, mkfifo.3: Document EDQUOT error
The return error EDQUOT is not documented in open(2), write(2),
symlink(2) etc..
Whether inodes or disk blocks are required for each function
is something I based on received wisdom and BSD documentation,
rather than tracing the code to the kernel. For symlink(2)
this certainly depends on the file system type.
This patch was previously sent to the linux-man mailing list
as an RFC in September 2010.
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-12-22 17:56:59 +00:00
|
|
|
exhausted.
|
|
|
|
.TP
|
2004-11-03 13:51:07 +00:00
|
|
|
.B EEXIST
|
|
|
|
.I pathname
|
|
|
|
already exists.
|
2008-06-11 15:26:41 +00:00
|
|
|
This includes the case where
|
|
|
|
.I pathname
|
|
|
|
is a symbolic link, dangling or not.
|
2004-11-03 13:51:07 +00:00
|
|
|
.TP
|
|
|
|
.B EFAULT
|
|
|
|
.IR pathname " points outside your accessible address space."
|
|
|
|
.TP
|
|
|
|
.B EINVAL
|
|
|
|
.I mode
|
2008-03-19 11:56:53 +00:00
|
|
|
requested creation of something other than a regular file, device
|
2004-11-03 13:51:07 +00:00
|
|
|
special file, FIFO or socket.
|
|
|
|
.TP
|
|
|
|
.B ELOOP
|
|
|
|
Too many symbolic links were encountered in resolving
|
|
|
|
.IR pathname .
|
|
|
|
.TP
|
|
|
|
.B ENAMETOOLONG
|
|
|
|
.IR pathname " was too long."
|
|
|
|
.TP
|
|
|
|
.B ENOENT
|
|
|
|
A directory component in
|
|
|
|
.I pathname
|
|
|
|
does not exist or is a dangling symbolic link.
|
|
|
|
.TP
|
|
|
|
.B ENOMEM
|
|
|
|
Insufficient kernel memory was available.
|
|
|
|
.TP
|
|
|
|
.B ENOSPC
|
|
|
|
The device containing
|
|
|
|
.I pathname
|
|
|
|
has no room for the new node.
|
|
|
|
.TP
|
|
|
|
.B ENOTDIR
|
|
|
|
A component used as a directory in
|
|
|
|
.I pathname
|
|
|
|
is not, in fact, a directory.
|
|
|
|
.TP
|
|
|
|
.B EPERM
|
|
|
|
.I mode
|
|
|
|
requested creation of something other than a regular file,
|
intro.1, time.1, accept.2, bind.2, connect.2, execve.2, flock.2, getdents.2, getpriority.2, getuid.2, intro.2, ioctl.2, mincore.2, mknod.2, personality.2, ptrace.2, read.2, recv.2, select_tut.2, send.2, sendfile.2, shmctl.2, sigaction.2, signal.2, stat.2, times.2, truncate.2, umask.2, wait.2, MB_CUR_MAX.3, MB_LEN_MAX.3, argz_add.3, btowc.3, clearenv.3, clock.3, cmsg.3, end.3, endian.3, errno.3, exit.3, fgetwc.3, fgetws.3, fopen.3, fputwc.3, fputws.3, fseek.3, fwide.3, getfsent.3, getgrnam.3, gethostid.3, getipnodebyname.3, getmntent.3, getpwnam.3, getwchar.3, grantpt.3, iconv.3, iconv_close.3, iconv_open.3, insque.3, intro.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, malloc.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mkstemp.3, mktemp.3, nl_langinfo.3, openpty.3, posix_openpt.3, printf.3, ptsname.3, putwchar.3, qecvt.3, rcmd.3, readdir.3, rexec.3, rpc.3, setnetgrent.3, shm_open.3, sigpause.3, stdin.3, stpcpy.3, strftime.3, strptime.3, syslog.3, towctrans.3, towlower.3, towupper.3, ttyslot.3, ungetwc.3, unlocked_stdio.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wprintf.3, console_ioctl.4, pts.4, elf.5, filesystems.5, hosts.5, proc.5, ttytype.5, boot.7, capabilities.7, credentials.7, epoll.7, glob.7, koi8-r.7, path_resolution.7, pty.7, signal.7, suffixes.7, time.7, unicode.7, unix.7, uri.7, utf-8.7: global fix: s/Unix/UNIX/
The man pages were rather inconsistent in the use of "Unix"
versus "UNIX". Let's go with the trademark usage.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-10-12 04:45:38 +00:00
|
|
|
FIFO (named pipe), or UNIX domain socket, and the caller
|
2004-11-03 13:51:07 +00:00
|
|
|
is not privileged (Linux: does not have the
|
|
|
|
.B CAP_MKNOD
|
2005-05-18 09:39:52 +00:00
|
|
|
capability);
|
intro.1, _syscall.2, access.2, arch_prctl.2, cacheflush.2, chown.2, clock_getres.2, clone.2, create_module.2, fcntl.2, flock.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getpriority.2, getrlimit.2, getrusage.2, ioprio_set.2, kexec_load.2, madvise.2, mbind.2, migrate_pages.2, mknod.2, mmap.2, mount.2, move_pages.2, mprotect.2, open.2, pause.2, pciconfig_read.2, perf_event_open.2, prctl.2, ptrace.2, query_module.2, read.2, reboot.2, recv.2, s390_runtime_instr.2, sched_setscheduler.2, select_tut.2, send.2, set_mempolicy.2, setfsgid.2, setfsuid.2, sigaction.2, spu_create.2, spu_run.2, stime.2, swapon.2, syslog.2, timer_create.2, timer_getoverrun.2, times.2, tkill.2, umount.2, unimplemented.2, ustat.2, vm86.2, wait.2, abs.3, aio_read.3, aio_write.3, bsd_signal.3, catgets.3, clearenv.3, cmsg.3, dbopen.3, dirfd.3, dlopen.3, exec.3, fenv.3, ferror.3, fmemopen.3, fnmatch.3, fopen.3, futimes.3, getaddrinfo.3, getifaddrs.3, getipnodebyname.3, hsearch.3, if_nameindex.3, inet_pton.3, mblen.3, mbrlen.3, mbsrtowcs.3, mbtowc.3, mcheck.3, memfrob.3, mq_notify.3, netlink.3, posix_memalign.3, printf.3, pthread_attr_setscope.3, pthread_cleanup_push.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setcancelstate.3, pthread_setconcurrency.3, raise.3, resolver.3, rpc.3, rtime.3, rtnetlink.3, scanf.3, setbuf.3, setnetgrent.3, shm_open.3, sigpause.3, sigset.3, sigwait.3, sockatmark.3, strcasecmp.3, strcmp.3, strdup.3, strftime.3, strptime.3, strsignal.3, strverscmp.3, sysv_signal.3, termios.3, wcrtomb.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wctomb.3, wprintf.3, console_codes.4, cpuid.4, msr.4, rtc.4, sk98lin.4, st.4, tty.4, charmap.5, core.5, elf.5, hosts.equiv.5, proc.5, resolv.conf.5, services.5, slabinfo.5, arp.7, bootparam.7, capabilities.7, charsets.7, cpuset.7, ddp.7, epoll.7, feature_test_macros.7, futex.7, hier.7, icmp.7, inotify.7, ip.7, ipv6.7, man-pages.7, mdoc.7, mdoc.samples.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, posixoptions.7, pthreads.7, raw.7, rtld-audit.7, rtnetlink.7, sem_overview.7, sigevent.7, socket.7, spufs.7, tcp.7, udp.7, unicode.7, uri.7, utf-8.7, intro.8, ldconfig.8, sync.8: Global fix: fix placement of word "only"
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-31 08:53:00 +00:00
|
|
|
.\" For UNIX domain sockets and regular files, EPERM is returned only in
|
2005-05-18 09:39:52 +00:00
|
|
|
.\" Linux 2.2 and earlier; in Linux 2.4 and later, unprivileged can
|
|
|
|
.\" use mknod() to make these files.
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
also returned if the filesystem containing
|
2004-11-03 13:51:07 +00:00
|
|
|
.I pathname
|
|
|
|
does not support the type of node requested.
|
|
|
|
.TP
|
|
|
|
.B EROFS
|
|
|
|
.I pathname
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
refers to a file on a read-only filesystem.
|
2014-02-21 09:28:35 +00:00
|
|
|
.PP
|
|
|
|
The following additional errors can occur for
|
|
|
|
.BR mknodat ():
|
|
|
|
.TP
|
|
|
|
.B EBADF
|
|
|
|
.I dirfd
|
|
|
|
is not a valid file descriptor.
|
|
|
|
.TP
|
|
|
|
.B ENOTDIR
|
|
|
|
.I pathname
|
|
|
|
is relative and
|
|
|
|
.I dirfd
|
|
|
|
is a file descriptor referring to a file other than a directory.
|
|
|
|
.SH VERSIONS
|
|
|
|
.BR mknodat ()
|
|
|
|
was added to Linux in kernel 2.6.16;
|
|
|
|
library support was added to glibc in version 2.4.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH CONFORMING TO
|
2014-02-21 09:28:35 +00:00
|
|
|
.BR mknod ():
|
2014-02-21 09:32:09 +00:00
|
|
|
SVr4, 4.4BSD, POSIX.1-2001 (but see below), POSIX.1-2008.
|
2006-08-03 13:57:17 +00:00
|
|
|
.\" The Linux version differs from the SVr4 version in that it
|
|
|
|
.\" does not require root permission to create pipes, also in that no
|
|
|
|
.\" EMULTIHOP, ENOLINK, or EINTR error is documented.
|
2014-02-26 17:29:50 +00:00
|
|
|
|
2014-02-21 09:28:35 +00:00
|
|
|
.BR mknodat ():
|
|
|
|
POSIX.1-2008.
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH NOTES
|
2006-08-03 13:57:17 +00:00
|
|
|
POSIX.1-2001 says: "The only portable use of
|
2004-11-03 13:51:07 +00:00
|
|
|
.BR mknod ()
|
2007-04-12 22:42:49 +00:00
|
|
|
is to create a FIFO-special file.
|
|
|
|
If
|
2004-11-03 13:51:07 +00:00
|
|
|
.I mode
|
2007-12-13 20:42:14 +00:00
|
|
|
is not
|
|
|
|
.B S_IFIFO
|
|
|
|
or
|
2004-11-03 13:51:07 +00:00
|
|
|
.I dev
|
|
|
|
is not 0, the behavior of
|
|
|
|
.BR mknod ()
|
|
|
|
is unspecified."
|
2007-12-14 07:04:07 +00:00
|
|
|
However, nowadays one should never use
|
|
|
|
.BR mknod ()
|
|
|
|
for this purpose; one should use
|
|
|
|
.BR mkfifo (3),
|
|
|
|
a function especially defined for this purpose.
|
2004-11-03 13:51:07 +00:00
|
|
|
|
2014-02-21 09:31:43 +00:00
|
|
|
Under Linux,
|
|
|
|
.BR mknod ()
|
|
|
|
cannot be used to create directories.
|
2004-11-03 13:51:07 +00:00
|
|
|
One should make directories with
|
2007-12-14 07:04:07 +00:00
|
|
|
.BR mkdir (2).
|
intro.1, time.1, accept.2, bind.2, connect.2, execve.2, flock.2, getdents.2, getpriority.2, getuid.2, intro.2, ioctl.2, mincore.2, mknod.2, personality.2, ptrace.2, read.2, recv.2, select_tut.2, send.2, sendfile.2, shmctl.2, sigaction.2, signal.2, stat.2, times.2, truncate.2, umask.2, wait.2, MB_CUR_MAX.3, MB_LEN_MAX.3, argz_add.3, btowc.3, clearenv.3, clock.3, cmsg.3, end.3, endian.3, errno.3, exit.3, fgetwc.3, fgetws.3, fopen.3, fputwc.3, fputws.3, fseek.3, fwide.3, getfsent.3, getgrnam.3, gethostid.3, getipnodebyname.3, getmntent.3, getpwnam.3, getwchar.3, grantpt.3, iconv.3, iconv_close.3, iconv_open.3, insque.3, intro.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, malloc.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mkstemp.3, mktemp.3, nl_langinfo.3, openpty.3, posix_openpt.3, printf.3, ptsname.3, putwchar.3, qecvt.3, rcmd.3, readdir.3, rexec.3, rpc.3, setnetgrent.3, shm_open.3, sigpause.3, stdin.3, stpcpy.3, strftime.3, strptime.3, syslog.3, towctrans.3, towlower.3, towupper.3, ttyslot.3, ungetwc.3, unlocked_stdio.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wprintf.3, console_ioctl.4, pts.4, elf.5, filesystems.5, hosts.5, proc.5, ttytype.5, boot.7, capabilities.7, credentials.7, epoll.7, glob.7, koi8-r.7, path_resolution.7, pty.7, signal.7, suffixes.7, time.7, unicode.7, unix.7, uri.7, utf-8.7: global fix: s/Unix/UNIX/
The man pages were rather inconsistent in the use of "Unix"
versus "UNIX". Let's go with the trademark usage.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-10-12 04:45:38 +00:00
|
|
|
.\" and one should make UNIX domain sockets with socket(2) and bind(2).
|
2004-11-03 13:51:07 +00:00
|
|
|
|
2007-04-12 22:42:49 +00:00
|
|
|
There are many infelicities in the protocol underlying NFS.
|
|
|
|
Some of these affect
|
2014-02-21 09:31:43 +00:00
|
|
|
.BR mknod ()
|
|
|
|
and
|
|
|
|
.BR mknodat (2).
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH SEE ALSO
|
2008-05-13 11:29:39 +00:00
|
|
|
.BR chmod (2),
|
|
|
|
.BR chown (2),
|
2004-11-03 13:51:07 +00:00
|
|
|
.BR fcntl (2),
|
|
|
|
.BR mkdir (2),
|
|
|
|
.BR mount (2),
|
|
|
|
.BR socket (2),
|
|
|
|
.BR stat (2),
|
|
|
|
.BR umask (2),
|
|
|
|
.BR unlink (2),
|
2008-12-01 17:39:36 +00:00
|
|
|
.BR makedev (3),
|
2007-05-26 12:41:39 +00:00
|
|
|
.BR mkfifo (3),
|
2015-04-21 11:52:16 +00:00
|
|
|
.BR acl (5)
|
2007-05-26 12:41:39 +00:00
|
|
|
.BR path_resolution (7)
|