Michael Kerrisk
979867082b
locale.1, localedef.1, _exit.2, accept.2, access.2, acct.2, adjtimex.2, bdflush.2, bind.2, bpf.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_ctl.2, eventfd.2, execve.2, fallocate.2, fanotify_init.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, getdomainname.2, getgroups.2, gethostname.2, getpagesize.2, getpeername.2, getsid.2, getsockname.2, getsockopt.2, gettimeofday.2, init_module.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, kexec_load.2, kill.2, killpg.2, link.2, listen.2, llseek.2, lseek.2, madvise.2, memfd_create.2, mincore.2, mkdir.2, mknod.2, mmap.2, mount.2, nanosleep.2, nice.2, open.2, personality.2, pipe.2, poll.2, posix_fadvise.2, read.2, readahead.2, readlink.2, readv.2, recv.2, recvmmsg.2, rename.2, request_key.2, sched_setaffinity.2, sched_setattr.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendfile.2, sendmmsg.2, seteuid.2, setns.2, setpgid.2, setreuid.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigsuspend.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, symlink.2, sync.2, syscall.2, syscalls.2, times.2, truncate.2, unlink.2, unshare.2, uselib.2, utimensat.2, vfork.2, vhangup.2, wait.2, wait4.2, write.2, a64l.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_read.3, aio_write.3, asin.3, asinh.3, atan.3, atan2.3, atanh.3, atoi.3, backtrace.3, cbrt.3, ceil.3, cfree.3, clearenv.3, clock_getcpuclockid.3, clog10.3, cmsg.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, daemon.3, dirfd.3, div.3, dl_iterate_phdr.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, endian.3, erf.3, erfc.3, errno.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, ferror.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmin.3, fmod.3, fopen.3, fpclassify.3, frexp.3, fseeko.3, fts.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getline.3, getloadavg.3, getmntent.3, getnameinfo.3, getnetent_r.3, getpass.3, getprotoent_r.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getservent_r.3, getspnam.3, getsubopt.3, getusershell.3, getutent.3, getw.3, gsignal.3, hypot.3, ilogb.3, inet.3, initgroups.3, insque.3, isalpha.3, isgreater.3, iswblank.3, j0.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, makedev.3, matherr.3, mbsnrtowcs.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_receive.3, mq_send.3, nan.3, nextafter.3, on_exit.3, open_memstream.3, opendir.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, psignal.3, pthread_attr_setstack.3, pthread_setaffinity_np.3, putenv.3, putpwent.3, qecvt.3, rand.3, random.3, random_r.3, rcmd.3, readdir.3, realpath.3, remainder.3, remquo.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, scalb.3, scalbln.3, scandir.3, scanf.3, seekdir.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setnetgrent.3, siginterrupt.3, signbit.3, significand.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stpcpy.3, stpncpy.3, strdup.3, strerror.3, strftime.3, strlen.3, strnlen.3, strsep.3, strsignal.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, unlocked_stdio.3, usleep.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wprintf.3, y0.3, pts.4, st.4, tty_ioctl.4, elf.5, gai.conf.5, group.5, locale.5, nsswitch.conf.5, proc.5, utmp.5, aio.7, capabilities.7, credentials.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, mq_overview.7, namespaces.7, pipe.7, signal.7, socket.7, standards.7, svipc.7, symlink.7, time.7, unicode.7, unix.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-15 17:30:43 +13:00
Michael Kerrisk
cff459dea2
kill.2, sigaction.2, sigpending.2, sigprocmask.2, sigsuspend.2, ctermid.3, ferror.3, fopen.3, getaddrinfo.3, getnameinfo.3, longjmp.3, rand.3, setjmp.3, sigsetops.3, sigwait.3, tzset.3: Simply FTM requirements
...
_XOPEN_SOURCE implies _POSIX_C_SOURCE >=2, so simplify FTM
requirements in various pages.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-01 20:01:05 +01:00
Michael Kerrisk
d59161f912
ctime.3, ffs.3, finite.3, flockfile.3, gethostbyname.3, getnameinfo.3, getw.3, insque.3, isalpha.3, popen.3, printf.3, siginterrupt.3, strdup.3, strtok.3, toascii.3, tzset.3, unlocked_stdio.3: Update FTM requirements (mostly _DEFAULT_SOURCE)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-01 20:01:05 +01:00
Michael Kerrisk
c1016e8767
kill.2, sigaction.2, sigpending.2, sigprocmask.2, sigsuspend.2, ctermid.3, ctime.3, ferror.3, flockfile.3, fopen.3, getaddrinfo.3, getgrnam.3, getnameinfo.3, getpwnam.3, rand.3, sigsetops.3, sigwait.3, strtok.3, tzset.3, unlocked_stdio.3, feature_test_macros.7: Remove mention of the obsolete _POSIX_SOURCE macro from SYNOPSIS
...
_POSIX_SOURCE was a POSIX.1-1990 creation that was soon made
obsolete bu _POSIX_C_SOURCE. Retaining mention of it
in the feature test macro requirements section of the
SYNOPSIS doesn't contain important information, and may
mislead readers into actually trying to use this macro.
A few mentions of it a maintained in a some pages where
defining _POSIX_SOURCE inhibits some behavior.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-01 20:01:04 +01:00
Michael Kerrisk
787dd4ad3a
membarrier.2, crypt.3, dladdr.3, duplocale.3, fmemopen.3, gethostbyname.3, mallopt.3, newlocale.3, resolver.3, sigsetops.3, strfmon.3, tzset.3, console_ioctl.4, lirc.4, loop.4, vcs.4, dir_colors.5, locale.5, proc.5, tzfile.5, attributes.7, bootparam.7, capabilities.7, feature_test_macros.7, icmp.7, man-pages.7, netlink.7, path_resolution.7, pipe.7, socket.7, unix.7, vdso.7: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-02-03 09:14:22 +01:00
Michael Kerrisk
29b41e747f
accept.2, acct.2, bind.2, clock_getres.2, connect.2, dup.2, epoll_create.2, eventfd.2, execve.2, fanotify_init.2, fcntl.2, fork.2, futex.2, get_robust_list.2, getcpu.2, getpeername.2, getrlimit.2, getsockname.2, getsockopt.2, gettimeofday.2, inotify_init.2, listen.2, membarrier.2, memfd_create.2, mlock.2, mmap.2, personality.2, pipe.2, poll.2, recv.2, send.2, sendfile.2, shmget.2, shutdown.2, sigreturn.2, socket.2, socketcall.2, socketpair.2, spu_create.2, swapon.2, time.2, timerfd_create.2, uselib.2, dlerror.3, dlopen.3, drand48.3, errno.3, fnmatch.3, getgrent.3, getgrnam.3, getlogin.3, getpwent.3, getpwnam.3, iconv.3, mq_open.3, opendir.3, random_r.3, sem_open.3, shm_open.3, tmpfile.3, tzset.3, random.4, fanotify.7, futex.7, vdso.7, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-29 13:48:42 +01:00
Carlos O'Donell
17e9724a2e
tzset.3: Clarify "daylight" and remove erroneous note
...
When tzset is run the value of daylight is computed
by looking at all available rules for the application
of daylight savings. This includes reading the tzdata
files to determine if there is a transition or not for
the current timezone. It also includes parsing TZ env
to see if it specifies custom rules which are used in
precedence to any tzdata rules. Therefore daylight is
going to be set if there is a daylight saving rule past,
present, or future that indicates a transition. We clarify
that in the man page.
Lastly, the note about tz_dsttime is not correct and is
removed. The earlier paragraph about daylight makes it
clear that it doesn't mean "daylight saving rule applies
now", and the interaction with tz_dsttime is not correct
for glibc on Linux (as outlined in my gettimeofday.3 patch
sent here: http://marc.info/?l=linux-man&m=144977768703615&w=2 ).
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-16 16:43:45 +01:00
Michael Kerrisk
460495ca58
ldd.1, sprof.1, accept.2, alarm.2, bind.2, chdir.2, clock_nanosleep.2, close.2, connect.2, dup.2, execve.2, fsync.2, getgid.2, getpeername.2, getsid.2, getsockname.2, getsockopt.2, getuid.2, io_getevents.2, kill.2, listen.2, lseek.2, mmap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nice.2, pause.2, pipe.2, rmdir.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select_tut.2, semctl.2, semop.2, setsid.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, signal.2, socketpair.2, sync.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, truncate.2, umask.2, MB_CUR_MAX.3, a64l.3, abs.3, assert.3, atexit.3, atof.3, atoi.3, basename.3, bsearch.3, btowc.3, byteorder.3, catgets.3, catopen.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, crypt.3, ctermid.3, difftime.3, div.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, encrypt.3, exit.3, fclose.3, ffs.3, fgetc.3, fgetwc.3, fgetws.3, flockfile.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fputwc.3, fputws.3, fseek.3, fseeko.3, ftok.3, fwide.3, getdate.3, getenv.3, getgrent.3, getgrnam.3, gethostid.3, getlogin.3, getnetent.3, getopt.3, getpwent.3, getpwnam.3, getsubopt.3, getutent.3, getwchar.3, grantpt.3, hsearch.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, inet.3, inet_ntop.3, inet_pton.3, insque.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, lockf.3, longjmp.3, lsearch.3, malloc.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memmove.3, memset.3, mktemp.3, mq_close.3, mq_getattr.3, mq_receive.3, mq_send.3, mq_unlink.3, offsetof.3, popen.3, posix_memalign.3, posix_openpt.3, printf.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstacksize.3, pthread_equal.3, pthread_exit.3, pthread_getcpuclockid.3, pthread_kill.3, pthread_self.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_testcancel.3, ptsname.3, putenv.3, puts.3, putwchar.3, qsort.3, raise.3, random.3, readdir.3, regex.3, remove.3, rewinddir.3, seekdir.3, sem_destroy.3, sem_getvalue.3, sem_unlink.3, sem_wait.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, signbit.3, sigpause.3, sigset.3, sigsetops.3, sigwait.3, sleep.3, sockatmark.3, statvfs.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strlen.3, strpbrk.3, strptime.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strxfrm.3, swab.3, sysconf.3, system.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tmpfile.3, towctrans.3, tsearch.3, ttyname.3, tzset.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, wcrtomb.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, fanotify.7, mq_overview.7, nptl.7, sem_overview.7, shm_overview.7, sigevent.7, symlink.7, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-08-08 18:21:22 +02:00
Michael Kerrisk
595652e01e
tzset.3: CONFORMING TO: add POSIX.1-2008
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-07-24 09:32:12 +02:00
Michael Kerrisk
f26710858b
tzset.3: srcfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-04-22 12:04:26 +02:00
Michael Kerrisk
1e64c86bbf
intro.1, ldd.1, clone.2, getgroups.2, getpid.2, getsockopt.2, ioctl_list.2, msgop.2, open.2, seccomp.2, setgid.2, setresuid.2, setreuid.2, setuid.2, sigaction.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, syscall.2, syscalls.2, umount.2, clock.3, dlopen.3, fmemopen.3, fpathconf.3, fputwc.3, fputws.3, fseek.3, fseeko.3, gcvt.3, getline.3, getwchar.3, hypot.3, if_nameindex.3, initgroups.3, popen.3, resolver.3, strcoll.3, strdup.3, tzset.3, ulimit.3, wcstombs.3, wctob.3, xdr.3, console_codes.4, random.4, filesystems.5, host.conf.5, hosts.5, proc.5, resolv.conf.5, securetty.5, credentials.7, feature_test_macros.7, hier.7, ipv6.7, packet.7, pthreads.7, raw.7, signal.7, tcp.7, user_namespaces.7, ld.so.8, ldconfig.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-03-29 22:30:09 +02:00
J William Piggott
4faf9583af
tzset.3: Add 'std' quoting information
...
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-03-22 19:25:22 +01:00
Peng Haitao
1a14cdb6f0
tzset.3: ATTRIBUTES: Note function that is thread safe with exceptions
...
The function tzset() is thread safe with exceptions.
Signed-off-by: Peng Haitao <penght@cn.fujitsu.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-02-27 14:07:56 +01:00
Michael Kerrisk
6d322d5fc7
time.1, access.2, arch_prctl.2, cacheflush.2, capget.2, clone.2, execve.2, fcntl.2, fork.2, getpid.2, getxattr.2, ioctl.2, ioctl_fat.2, killpg.2, listxattr.2, madvise.2, migrate_pages.2, modify_ldt.2, mprotect.2, msgget.2, msgop.2, perf_event_open.2, ptrace.2, sched_setattr.2, semget.2, semop.2, sendfile.2, set_thread_area.2, setxattr.2, stat.2, statfs.2, wait.2, wait4.2, encrypt.3, mktemp.3, pthread_attr_setschedparam.3, resolver.3, statvfs.3, syslog.3, tzset.3, core.5, host.conf.5, intro.5, proc.5, resolv.conf.5, pthreads.7, socket.7, unix.7, ld.so.8, ldconfig.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-02-21 09:26:52 +01:00
J William Piggott
feb9265db8
tzset.3: ffix
...
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-02-21 08:32:12 +01:00
JWP
036ea82541
tzset.3: Add offset format
...
tzset.3 does not illustrate the POSIX offset format.
Specifically, there is no indication in the manual
what the optional components of it are.
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-02-21 08:32:12 +01:00
Michael Kerrisk
a288791dc7
tzset.3: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-02-02 07:37:31 +01:00
J William Piggott
09e421f1aa
tzset.3: ffix
...
Fix tzset.3 regression, dst is optional.
$ date
Sun Feb 1 15:14:33 EST 2015
$ TZ=NZST-12 date
Mon Feb 2 08:14:38 NZST 2015
$ TZ=EST5 date
Sun Feb 1 15:15:02 EST 2015
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-02-02 07:32:59 +01:00
Michael Kerrisk
dbc45ff182
tzset.3: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-02-01 17:04:21 +01:00
J William Piggott
343d131418
tzset.3: typos and version bump
...
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-02-01 16:30:36 +01:00
J William Piggott
411dded247
tzset.3: There are only two TZ formats
...
tzset(3) currently states that there are three TZ formats. The
first two it lists are actually variations of the POSIX-style
TZ format, of which there are at least five variations.
This patch corrects this to match the POSIX specification of
TZ having only two formats.
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-02-01 16:29:49 +01:00
J William Piggott
a321c9154c
tzset.3: Fix incorrect TZ string representation
...
The TZ string representation indicates that the start/end
rules are required; this is incorrect.
Updated the TZ string format to the POSIX specification and
improve its readability by having only the optional parts in
italics.
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-02-01 16:28:59 +01:00
J William Piggott
1cec674c72
tzset.3: Add description for posixrules file
...
Based upon reviewing the glibc source, the posixrules file is being used
for very specific TZ strings that can be represented as:
[:]stdoffsetdst[offset][,]
If anything follows the above string, even invalid data, posixrules will
not be used. Below is some shell output demonstrating this.
$ TZ="NZST-12:00:00NZDT-13:00:00,ANYTHING" \
strace -eopen date 2>&1 | grep -Ei 'posixrules|jan'
Thu Jan 29 06:53:35 NZDT 2015
$ TZ="NZST-12:00:00NZDT-13:00:00," \
strace -eopen date 2>&1 | grep -Ei 'posixrules|jan'
open("/usr/share/zoneinfo/posixrules", O_RDONLY|O_CLOEXEC) = 3
Thu Jan 29 05:54:58 NZST 2015
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-01-29 23:19:19 +01:00
J William Piggott
c1e90e15d3
tzset.3: Add ENVIRONMENT section + other rearrangements
...
FILES section was overly verbose and included
environment variables. Added ENVIRONMENT section,
removing ENV VARS from the FILES section.
As stated in commit 2c7f200
, /usr/share/zoneinfo/localtime
is not used, nor recommended by glibc.
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-01-29 23:16:58 +01:00
Michael Kerrisk
520d6ed08e
tzset.3: Clarify that first timezone format does not contain spaces
...
Reported-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-01-25 15:19:09 +01:00
JWP
2c7f2006a9
tzset.3: Correct system timezone file path
...
The manual incorrectly states the system timezone
path as /usr/share/zoneinfo/localtime. Glibc does
not use that file for anything, it uses
$(prefix)/etc/localtime.
There is an ambiguous reference in the man-page to
/etc/localtime, but it does not indicate that it
will be used. It states clearly that
/usr/share/zoneinfo/localtime is used.
A comment in the glibc Makeconfig even says that
file should not exist:
> ... relative to $(zonedir). It is a good idea
> to put this somewhere other than there, so the
> zoneinfo directory contains only universal data,
> localizing the configuration data elsewhere.
Furthermore, the man page does not indicate the
reason this file is being used; which is because
it is the configured system timezone.
A later patch in this series addresses the
possibility that /etc/localtime could be changed
during glibc's compilation. The language changed
in this patch points to the FILE section which is
where the explanation will be. There is no reason
to repeat that information multiple times
throughout the man-page.
EVIDENCE:
glibc/Makeconfig:256: sysconfdir = $(prefix)/etc
glibc/Makeconfig:272: localtime-file = $(sysconfdir)/localtime
FROM INFO LIBC:
C.2 Installing the C Library
============================
To configure the locally used timezone, set the `TZ' environment
variable. The script `tzselect' helps you to select the right value.
As an example, for Germany, `tzselect' would tell you to use
`TZ='Europe/Berlin''. For a system wide installation (the given paths
are for an installation with `--prefix=/usr'), link the timezone file
which is in `/usr/share/zoneinfo' to the file `/etc/localtime'. For
Germany, you might execute `ln -s /usr/share/zoneinfo/Europe/Berlin
/etc/localtime'.
STEPS TO REPRODUCE:
cd /usr/share/zoneinfo/
cp Antarctica/South_Pole localtime
cp /US/Eastern /etc/localtime
cd
date
Sun Jan 18 12:06:36 EST 2015
TZ=:/usr/share/zoneinfo/localtime date
Mon Jan 19 06:06:54 NZDT 2015
rm /etc/localtime
date
Sun Jan 18 17:08:37 UTC 2015
TZ=:/usr/share/zoneinfo/localtime date
Mon Jan 19 06:08:41 NZDT 2015
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-01-25 15:19:09 +01:00
JWP
025812041f
tzset.3: Document behavior when TZ filespec omits the colon
...
If the TZ filespec omits the leading colon, glibc will parse
it for any valid format, i.e., it will still work.
STEPS TO REPRODUCE:
TZ=:Europe/Kiev date
Sun Jan 18 20:19:13 EET 2015
TZ=Europe/Kiev date
Sun Jan 18 20:19:20 EET 2015
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-01-25 15:18:44 +01:00
JWP
4e00a0b860
tzset.3: Filespec omitted incorrect
...
Paragraph three of the DESCRIPTION section says
that when TZ is set, but empty, then UTC is used.
Later it says if the TZ filespec is omitted then the file
/usr/share/zoneinfo/localtime is used. This is incorrect,
it will use UTC in that case as well.
Steps to reproduce:
cd /usr/share/zoneinfo/
cp Antarctica/South_Pole localtime
cd
date
Sun Jan 18 10:59:50 EST 2015
TZ=:Hongkong date
Sun Jan 18 23:59:56 HKT 2015
TZ=:/usr/share/zoneinfo/localtime date
Mon Jan 19 05:00:03 NZDT 2015
TZ=: date
Sun Jan 18 16:00:11 UTC 2015
TZ=":" date
Sun Jan 18 16:00:18 UTC 2015
TZ=':' date
Sun Jan 18 16:00:24 UTC 2015
TZ=:/ date
Sun Jan 18 16:00:34 2015
TZ=":/" date
Sun Jan 18 16:00:40 2015
TZ="" date
Sun Jan 18 16:00:45 UTC 2015
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-01-25 15:18:44 +01:00
Simon Paillard
ccde3aacfd
tzset.3: grfix
...
The sentence is missing a word somewhere.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-10-16 11:56:22 +02:00
Michael Kerrisk
8980a50087
access.2, bdflush.2, bind.2, brk.2, chmod.2, chown.2, clone.2, epoll_wait.2, execve.2, fsync.2, getgroups.2, gethostname.2, getpagesize.2, getpriority.2, getrlimit.2, ioperm.2, kexec_load.2, link.2, mkdir.2, mmap.2, msgop.2, perf_event_open.2, process_vm_readv.2, ptrace.2, readlink.2, readv.2, recv.2, rename.2, sched_setaffinity.2, select.2, send.2, seteuid.2, signal.2, sigwaitinfo.2, stat.2, symlink.2, sync.2, sync_file_range.2, sysinfo.2, timer_create.2, uname.2, unlink.2, utime.2, wait.2, abs.3, atoi.3, catopen.3, cerf.3, cexp2.3, clearenv.3, clog2.3, ctime.3, des_crypt.3, ecvt.3, fgetgrent.3, flockfile.3, fseeko.3, ftime.3, ftok.3, ftw.3, getauxval.3, getcwd.3, getdtablesize.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, getline.3, getpass.3, getutent.3, glob.3, insque.3, lseek64.3, memmem.3, mkstemp.3, mktemp.3, on_exit.3, openpty.3, putenv.3, qecvt.3, realpath.3, remove.3, setbuf.3, sigpause.3, strftime.3, strptime.3, strstr.3, strtod.3, tzset.3, updwtmp.3, xcrypt.3, core.5, utmp.5, capabilities.7, charsets.7, environ.7, ipv6.7, man-pages.7, packet.7, vdso.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-19 11:55:41 -05:00
Michael Kerrisk
0fbb147d10
tzset.3: wfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-18 17:01:50 -05:00
Michael Kerrisk
503ad3d495
tzset.3: grfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-18 17:01:50 -05:00
Michael Kerrisk
7c4777066f
tzset.3: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-18 17:01:50 -05:00
Michael Kerrisk
8e6dc8dc6c
tzset.3: Remove ancient Linux libc details
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-18 17:01:50 -05:00
Michael Kerrisk
930152530c
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:10 +01:00
Michael Kerrisk
4b72fb6462
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:09 +01:00
Michael Kerrisk
47297adb6e
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 19:01:36 +01:00
Michael Kerrisk
567e764a80
tzset.3: Add some clarifying remarks to discussion of Julian day formats
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-03-25 06:51:50 +13:00
Peter Schiffer
5a554f8e52
tzset.3: Correct description for Julian 'n' date format
...
The Julian 'n' date format counts atrting from 0, not 1.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-03-25 06:51:31 +13:00
Seonghun Lim
4b9999d6e7
tzset.3: tfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2011-09-16 07:00:45 +02:00
Michael Kerrisk
513051f769
add_key.2, keyctl.2, request_key.2, stime.2, time.2, ctime.3, difftime.3, ftime.3, getspnam.3, mq_receive.3, mq_send.3, rtime.3, sem_wait.3, string.3, timeradd.3, tzset.3, rtc.4, core.5, icmp.7, time.7, zic.8: Updated .TH timestamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-02-25 10:43:57 +01:00
Michael Witten
750d65df7d
stime.2, strftime.3, tzset.3, zic.8: GMT -> UTC (where appropriate)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-01-16 19:17:39 +01:00
Michael Witten
464ba7fc4c
tzset.3: grfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-01-16 19:05:25 +01:00
Michael Kerrisk
c7094399ad
intro.1, time.1, adjtimex.2, capget.2, eventfd.2, fcntl.2, getrlimit.2, getsockopt.2, gettimeofday.2, intro.2, ioctl_list.2, ioperm.2, mlock.2, pivot_root.2, poll.2, prctl.2, ptrace.2, sched_setscheduler.2, select_tut.2, semget.2, sigaltstack.2, signalfd.2, sysctl.2, timer_settime.2, timerfd_create.2, wait.2, CPU_SET.3, argz_add.3, assert_perror.3, atexit.3, backtrace.3, bcmp.3, clearenv.3, ctime.3, dl_iterate_phdr.3, dlopen.3, ecvt.3, errno.3, error.3, ether_aton.3, exit.3, fenv.3, ferror.3, finite.3, flockfile.3, fnmatch.3, fpathconf.3, fpclassify.3, ftime.3, ftok.3, ftw.3, fwide.3, getaddrinfo.3, gethostbyname.3, getlogin.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getrpcent.3, getservent.3, glob.3, hsearch.3, inet.3, isalpha.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, longjmp.3, lsearch.3, malloc.3, matherr.3, mblen.3, mbsinit.3, mbtowc.3, on_exit.3, printf.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_equal.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setschedparam.3, pthread_setschedprio.3, ptsname.3, putenv.3, putgrent.3, raise.3, rcmd.3, regex.3, rexec.3, rpc.3, rpmatch.3, rtnetlink.3, scandir.3, sem_init.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, signbit.3, stdio_ext.3, strtod.3, strtol.3, strtoul.3, system.3, termios.3, timeradd.3, tzset.3, ualarm.3, wctomb.3, xdr.3, st.4, tty_ioctl.4, core.5, elf.5, proc.5, bootparam.7, capabilities.7, icmp.7, ip.7, ipv6.7, math_error.7, mdoc.samples.7, mq_overview.7, pthreads.7, raw.7, regex.7, socket.7, tcp.7, tzselect.8: Global fix: s/non-zero/nonzero/
...
The tendency in English, as prescribed in style guides like
Chicago MoS, is towards removing hyphens after prefixes
like "non-" etc.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-01-16 17:40:55 +01:00
Michael Kerrisk
44c95a090f
stat.2, tsearch.3, tzset.3: wfix: s/SysV/System V/
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-29 14:54:12 -05:00
Michael Kerrisk
5b0dc1baed
s/time zone/timezone/ for consistency across pages and with POSIX.1.
2008-09-07 04:17:25 +00:00
Michael Kerrisk
0f200f076c
Add/fix feature test macro requirements.
2008-08-29 15:50:13 +00:00
Michael Kerrisk
44a2c3286c
Even when the CONFORMING TO section is just a list of standards,
...
they should be terminated by a period.
2008-07-15 13:39:17 +00:00
Michael Kerrisk
f81fb4445b
s/\\'/\\(aq/
2008-06-09 15:49:35 +00:00
Michael Kerrisk
f8a07a2154
s/'/\\'/ to improve rendering in UTF-8.
2008-06-05 17:52:37 +00:00