2011-09-21 01:51:31 +00:00
|
|
|
.\" Copyright (C) 2011, Hewlett-Packard Development Company, L.P.
|
|
|
|
.\" Written by Stephen M. Cameron <scameron@beardog.cce.hp.com>
|
ldd.1, capget.2, clone.2, create_module.2, fallocate.2, futex.2, get_kernel_syms.2, get_thread_area.2, getcpu.2, getitimer.2, getpid.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_list.2, mkdir.2, mknod.2, pciconfig_read.2, pivot_root.2, posix_fadvise.2, query_module.2, sendfile.2, set_thread_area.2, setns.2, unshare.2, __setfpucw.3, a64l.3, addseverity.3, argz_add.3, bindresvport.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, ccos.3, ccosh.3, cerf.3, cexp.3, cexp2.3, cimag.3, clog.3, clog10.3, clog2.3, cmsg.3, conj.3, cpow.3, cproj.3, creal.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, des_crypt.3, envz_add.3, fdim.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmtmsg.3, fpclassify.3, gamma.3, getpt.3, getrpcent.3, getrpcport.3, getttyent.3, isgreater.3, key_setsecret.3, lgamma.3, malloc_hook.3, mempcpy.3, nan.3, netlink.3, nextafter.3, putgrent.3, remove.3, remquo.3, rpc.3, rtime.3, rtnetlink.3, setaliasent.3, setnetgrent.3, signbit.3, significand.3, sincos.3, stdin.3, tgamma.3, xcrypt.3, xdr.3, cciss.4, hpsa.4, mouse.4, pts.4, sk98lin.4, tty_ioctl.4, wavelan.4, hosts.equiv.5, rpc.5, tzfile.5, boot.7, complex.7, ddp.7, fifo.7, futex.7, icmp.7, ip.7, ipv6.7, netdevice.7, netlink.7, packet.7, raw.7, rtnetlink.7, socket.7, tcp.7, udp.7, unix.7, x25.7, sync.8: Global fix: Put copyright info at top of page, followed by blank line and LICENSE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:51 +00:00
|
|
|
.\"
|
2013-03-10 09:29:10 +00:00
|
|
|
.\" %%%LICENSE_START(GPLv2_ONELINE)
|
2011-09-21 01:51:31 +00:00
|
|
|
.\" Licensed under GNU General Public License version 2 (GPLv2)
|
epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, fallocate.2, futex.2, getcpu.2, getitimer.2, ioctl_list.2, ioprio_set.2, migrate_pages.2, move_pages.2, pciconfig_read.2, sendfile.2, setns.2, signalfd.2, spu_create.2, spu_run.2, sysinfo.2, timerfd_create.2, backtrace.3, cmsg.3, error.3, getpt.3, getrpcent.3, getrpcport.3, getsubopt.3, offsetof.3, program_invocation_name.3, rpc.3, rpmatch.3, rtnetlink.3, xdr.3, cciss.4, hpsa.4, pts.4, charmap.5, dir_colors.5, elf.5, gai.conf.5, locale.5, nscd.conf.5, nss.5, resolv.conf.5, rpc.5, arp.7, cpuset.7, ddp.7, epoll.7, fifo.7, futex.7, icmp.7, ip.7, ipv6.7, mailaddr.7, netdevice.7, packet.7, raw.7, regex.7, rtnetlink.7, socket.7, spufs.7, tcp.7, udp.7, unix.7, x25.7, ldconfig.8, nscd.8: Global fix: s/END_LICENSE/LICENSE_END/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-12 09:26:07 +00:00
|
|
|
.\" %%%LICENSE_END
|
2011-09-23 06:01:18 +00:00
|
|
|
.\"
|
2011-09-08 22:54:02 +00:00
|
|
|
.\" shorthand for double quote that works everywhere.
|
|
|
|
.ds q \N'34'
|
iconv.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, mtrace.1, pldd.1, sprof.1, time.1, _syscall.2, add_key.2, alloc_hugepages.2, arch_prctl.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fallocate.2, fanotify_init.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_console.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_iflags.2, ioctl_list.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, open_by_handle_at.2, outb.2, perf_event_open.2, perfmonctl.2, personality.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, reboot.2, recv.2, recvmmsg.2, remap_file_pages.2, rename.2, request_key.2, restart_syscall.2, rt_sigqueueinfo.2, s390_pci_mmio_write.2, s390_runtime_instr.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscall.2, syscalls.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timer_create.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cfree.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, cmsg.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console_codes.4, dsp56k.4, fuse.4, hd.4, hpsa.4, initrd.4, intro.4, loop.4, random.4, rtc.4, sd.4, sk98lin.4, st.4, wavelan.4, acct.5, core.5, elf.5, filesystems.5, host.conf.5, hosts.5, locale.5, nologin.5, proc.5, resolv.conf.5, rpc.5, slabinfo.5, utmp.5, aio.7, arp.7, bootparam.7, capabilities.7, cgroup_namespaces.7, cgroups.7, charsets.7, cpuset.7, ddp.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, futex.7, inode.7, inotify.7, ip.7, ipv6.7, keyrings.7, locale.7, man-pages.7, man.7, math_error.7, mount_namespaces.7, mq_overview.7, namespaces.7, netdevice.7, netlink.7, packet.7, pipe.7, pkeys.7, pthreads.7, pty.7, raw.7, rtld-audit.7, rtnetlink.7, sched.7, session-keyring.7, signal.7, sock_diag.7, socket.7, spufs.7, suffixes.7, tcp.7, udp.7, udplite.7, unicode.7, units.7, unix.7, uri.7, user_namespaces.7, vdso.7, x25.7, xattr.7, iconvconfig.8, ld.so.8, ldconfig.8, sln.8: Update timestamps
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-09-15 10:44:56 +00:00
|
|
|
.TH HPSA 4 2017-09-15 "Linux" "Linux Programmer's Manual"
|
2011-09-08 22:54:02 +00:00
|
|
|
.SH NAME
|
|
|
|
hpsa \- HP Smart Array SCSI driver
|
|
|
|
.SH SYNOPSIS
|
|
|
|
.nf
|
|
|
|
modprobe hpsa [ hpsa_allow_any=1 ]
|
|
|
|
.fi
|
|
|
|
.SH DESCRIPTION
|
|
|
|
.B hpsa
|
|
|
|
is a SCSI driver for HP Smart Array RAID controllers.
|
2011-09-08 23:08:47 +00:00
|
|
|
.SS Options
|
|
|
|
.IR "hpsa_allow_any=1" :
|
2011-09-08 22:54:02 +00:00
|
|
|
This option allows the driver to attempt to operate on
|
2011-09-21 02:20:40 +00:00
|
|
|
any HP Smart Array hardware RAID controller,
|
|
|
|
even if it is not explicitly known to the driver.
|
|
|
|
This allows newer hardware to work with older drivers.
|
|
|
|
Typically this is used to allow installation of
|
2011-09-22 03:11:57 +00:00
|
|
|
operating systems from media that predates the
|
2011-09-21 02:20:40 +00:00
|
|
|
RAID controller, though it may also be used to enable
|
|
|
|
.B hpsa
|
|
|
|
to drive older controllers that would normally be handled by the
|
2011-09-08 23:08:47 +00:00
|
|
|
.BR cciss (4)
|
|
|
|
driver.
|
|
|
|
These older boards have not been tested and are
|
|
|
|
not supported with
|
|
|
|
.BR hpsa ,
|
|
|
|
and
|
|
|
|
.BR cciss (4)
|
|
|
|
should still be used for these.
|
intro.1, time.1, _syscall.2, accept.2, brk.2, capget.2, faccessat.2, futimesat.2, gethostname.2, intro.2, ioprio_set.2, kill.2, madvise.2, mlock.2, mount.2, msgget.2, perf_event_open.2, poll.2, readv.2, sched_rr_get_interval.2, sched_setscheduler.2, select.2, select_tut.2, shmget.2, stat.2, timer_create.2, ustat.2, vfork.2, wait.2, alloca.3, atexit.3, catopen.3, crypt.3, dbopen.3, fenv.3, fopen.3, getaddrinfo_a.3, gethostbyname.3, getutent.3, intro.3, login.3, mallopt.3, queue.3, regex.3, sigpause.3, sigsetops.3, stdio.3, strftime.3, strptime.3, sysconf.3, ttyslot.3, undocumented.3, cciss.4, console_codes.4, hpsa.4, initrd.4, intro.4, rtc.4, st.4, tty_ioctl.4, wavelan.4, acct.5, charmap.5, dir_colors.5, hosts.5, intro.5, termcap.5, utmp.5, intro.6, armscii-8.7, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, ddp.7, epoll.7, glob.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man-pages.7, man.7, math_error.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, pthreads.7, raw.7, rtnetlink.7, signal.7, socket.7, spufs.7, svipc.7, tcp.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, intro.8: Global fix: use consistent capitalization in .SS headings
Capitalization in .SS sections across pages (and sometimes even
within a single page) is wildly inconsistent. Make it consistent.
Capitalize first word in heading, but otherwise use lower case,
except where English usage (e.g., proper nouns) or programming
language requirements (e.g., identifier names) dictate otherwise.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 14:08:38 +00:00
|
|
|
.SS Supported hardware
|
2011-09-08 22:54:02 +00:00
|
|
|
The
|
|
|
|
.B hpsa
|
|
|
|
driver supports the following Smart Array boards:
|
_syscall.2, capget.2, ioprio_set.2, semop.2, send.2, ctime.3, dysize.3, fenv.3, fmtmsg.3, ftok.3, ftw.3, getaddrinfo.3, getgrent_r.3, gethostbyname.3, getopt.3, getpw.3, getpwent_r.3, getsubopt.3, getutent.3, glob.3, if_nameindex.3, inet.3, lseek64.3, malloc_hook.3, mbrtowc.3, mkstemp.3, mq_receive.3, mq_send.3, posix_spawn.3, putgrent.3, putpwent.3, qsort.3, raise.3, rand.3, rtime.3, setaliasent.3, setbuf.3, shm_open.3, significand.3, sigqueue.3, statvfs.3, strfromd.3, strptime.3, strtol.3, strtoul.3, termios.3, tgamma.3, timeradd.3, tsearch.3, tzset.3, updwtmp.3, usleep.3, wcstok.3, console_codes.4, hd.4, hpsa.4, mem.4, null.4, ram.4, sd.4, ttyS.4, filesystems.5, group.5, passwd.5, shells.5, termcap.5, ttytype.5, tzfile.5, utmp.5, ascii.7, bootparam.7, complex.7, cpuset.7, epoll.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-17 21:40:17 +00:00
|
|
|
.PP
|
2011-09-08 22:54:02 +00:00
|
|
|
.nf
|
2011-09-08 23:08:47 +00:00
|
|
|
Smart Array P700M
|
|
|
|
Smart Array P212
|
|
|
|
Smart Array P410
|
|
|
|
Smart Array P410i
|
|
|
|
Smart Array P411
|
|
|
|
Smart Array P812
|
|
|
|
Smart Array P712m
|
|
|
|
Smart Array P711m
|
|
|
|
StorageWorks P1210m
|
2011-09-08 22:54:02 +00:00
|
|
|
.fi
|
2017-09-11 02:57:46 +00:00
|
|
|
.PP
|
|
|
|
.\" commit 135ae6edeb51979d0998daf1357f149a7d6ebb08
|
2017-09-13 11:58:40 +00:00
|
|
|
Since Linux 4.14, the following Smart Array boards are also supported:
|
2017-09-11 02:57:46 +00:00
|
|
|
.PP
|
|
|
|
.nf
|
|
|
|
Smart Array 5300
|
|
|
|
Smart Array 5312
|
|
|
|
Smart Array 532
|
|
|
|
Smart Array 5i
|
|
|
|
Smart Array 6400
|
|
|
|
Smart Array 6400 EM
|
|
|
|
Smart Array 641
|
|
|
|
Smart Array 642
|
|
|
|
Smart Array 6i
|
|
|
|
Smart Array E200
|
|
|
|
Smart Array E200i
|
|
|
|
Smart Array E200i
|
|
|
|
Smart Array E200i
|
|
|
|
Smart Array E200i
|
|
|
|
Smart Array E500
|
|
|
|
Smart Array P400
|
|
|
|
Smart Array P400i
|
|
|
|
Smart Array P600
|
|
|
|
Smart Array P700m
|
|
|
|
Smart Array P800
|
|
|
|
.fi
|
intro.1, time.1, _syscall.2, accept.2, brk.2, capget.2, faccessat.2, futimesat.2, gethostname.2, intro.2, ioprio_set.2, kill.2, madvise.2, mlock.2, mount.2, msgget.2, perf_event_open.2, poll.2, readv.2, sched_rr_get_interval.2, sched_setscheduler.2, select.2, select_tut.2, shmget.2, stat.2, timer_create.2, ustat.2, vfork.2, wait.2, alloca.3, atexit.3, catopen.3, crypt.3, dbopen.3, fenv.3, fopen.3, getaddrinfo_a.3, gethostbyname.3, getutent.3, intro.3, login.3, mallopt.3, queue.3, regex.3, sigpause.3, sigsetops.3, stdio.3, strftime.3, strptime.3, sysconf.3, ttyslot.3, undocumented.3, cciss.4, console_codes.4, hpsa.4, initrd.4, intro.4, rtc.4, st.4, tty_ioctl.4, wavelan.4, acct.5, charmap.5, dir_colors.5, hosts.5, intro.5, termcap.5, utmp.5, intro.6, armscii-8.7, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, ddp.7, epoll.7, glob.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man-pages.7, man.7, math_error.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, pthreads.7, raw.7, rtnetlink.7, signal.7, socket.7, spufs.7, svipc.7, tcp.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, intro.8: Global fix: use consistent capitalization in .SS headings
Capitalization in .SS sections across pages (and sometimes even
within a single page) is wildly inconsistent. Make it consistent.
Capitalize first word in heading, but otherwise use lower case,
except where English usage (e.g., proper nouns) or programming
language requirements (e.g., identifier names) dictate otherwise.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 14:08:38 +00:00
|
|
|
.SS Configuration details
|
2011-09-22 03:11:57 +00:00
|
|
|
To configure HP Smart Array controllers,
|
|
|
|
use the HP Array Configuration Utility (either
|
2011-09-21 02:20:40 +00:00
|
|
|
.BR hpacuxe (8)
|
|
|
|
or
|
|
|
|
.BR hpacucli (8))
|
|
|
|
or the Offline ROM-based Configuration Utility (ORCA)
|
2011-09-08 22:54:02 +00:00
|
|
|
run from the Smart Array's option ROM at boot time.
|
|
|
|
.SH FILES
|
intro.1, time.1, _syscall.2, accept.2, brk.2, capget.2, faccessat.2, futimesat.2, gethostname.2, intro.2, ioprio_set.2, kill.2, madvise.2, mlock.2, mount.2, msgget.2, perf_event_open.2, poll.2, readv.2, sched_rr_get_interval.2, sched_setscheduler.2, select.2, select_tut.2, shmget.2, stat.2, timer_create.2, ustat.2, vfork.2, wait.2, alloca.3, atexit.3, catopen.3, crypt.3, dbopen.3, fenv.3, fopen.3, getaddrinfo_a.3, gethostbyname.3, getutent.3, intro.3, login.3, mallopt.3, queue.3, regex.3, sigpause.3, sigsetops.3, stdio.3, strftime.3, strptime.3, sysconf.3, ttyslot.3, undocumented.3, cciss.4, console_codes.4, hpsa.4, initrd.4, intro.4, rtc.4, st.4, tty_ioctl.4, wavelan.4, acct.5, charmap.5, dir_colors.5, hosts.5, intro.5, termcap.5, utmp.5, intro.6, armscii-8.7, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, ddp.7, epoll.7, glob.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man-pages.7, man.7, math_error.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, pthreads.7, raw.7, rtnetlink.7, signal.7, socket.7, spufs.7, svipc.7, tcp.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, intro.8: Global fix: use consistent capitalization in .SS headings
Capitalization in .SS sections across pages (and sometimes even
within a single page) is wildly inconsistent. Make it consistent.
Capitalize first word in heading, but otherwise use lower case,
except where English usage (e.g., proper nouns) or programming
language requirements (e.g., identifier names) dictate otherwise.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 14:08:38 +00:00
|
|
|
.SS Device nodes
|
2011-09-21 02:20:40 +00:00
|
|
|
Logical drives are accessed via the SCSI disk driver
|
|
|
|
.RB ( sd (4)),
|
|
|
|
tape drives via the SCSI tape driver
|
|
|
|
.RB ( st (4)),
|
|
|
|
and
|
|
|
|
the RAID controller via the SCSI generic driver
|
|
|
|
.RB ( sg (4)),
|
|
|
|
with device nodes named
|
2014-02-08 12:11:57 +00:00
|
|
|
.IR /dev/sd* ,
|
2011-09-08 23:08:47 +00:00
|
|
|
.IR /dev/st* ,
|
|
|
|
and
|
|
|
|
.IR /dev/sg* ,
|
|
|
|
respectively.
|
intro.1, time.1, _syscall.2, accept.2, brk.2, capget.2, faccessat.2, futimesat.2, gethostname.2, intro.2, ioprio_set.2, kill.2, madvise.2, mlock.2, mount.2, msgget.2, perf_event_open.2, poll.2, readv.2, sched_rr_get_interval.2, sched_setscheduler.2, select.2, select_tut.2, shmget.2, stat.2, timer_create.2, ustat.2, vfork.2, wait.2, alloca.3, atexit.3, catopen.3, crypt.3, dbopen.3, fenv.3, fopen.3, getaddrinfo_a.3, gethostbyname.3, getutent.3, intro.3, login.3, mallopt.3, queue.3, regex.3, sigpause.3, sigsetops.3, stdio.3, strftime.3, strptime.3, sysconf.3, ttyslot.3, undocumented.3, cciss.4, console_codes.4, hpsa.4, initrd.4, intro.4, rtc.4, st.4, tty_ioctl.4, wavelan.4, acct.5, charmap.5, dir_colors.5, hosts.5, intro.5, termcap.5, utmp.5, intro.6, armscii-8.7, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, ddp.7, epoll.7, glob.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man-pages.7, man.7, math_error.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, pthreads.7, raw.7, rtnetlink.7, signal.7, socket.7, spufs.7, svipc.7, tcp.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, intro.8: Global fix: use consistent capitalization in .SS headings
Capitalization in .SS sections across pages (and sometimes even
within a single page) is wildly inconsistent. Make it consistent.
Capitalize first word in heading, but otherwise use lower case,
except where English usage (e.g., proper nouns) or programming
language requirements (e.g., identifier names) dictate otherwise.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 14:08:38 +00:00
|
|
|
.SS HPSA-specific host attribute files in /sys
|
2011-09-08 23:08:47 +00:00
|
|
|
.TP
|
|
|
|
.I /sys/class/scsi_host/host*/rescan
|
2011-09-21 02:20:40 +00:00
|
|
|
This is a write-only attribute.
|
2011-09-22 03:11:57 +00:00
|
|
|
Writing to this attribute will cause the driver to scan for
|
2016-06-07 09:19:24 +00:00
|
|
|
new, changed, or removed devices (e.g., hot-plugged tape drives,
|
2011-09-22 03:11:57 +00:00
|
|
|
or newly configured or deleted logical drives, etc.)
|
|
|
|
and notify the SCSI midlayer of any changes detected.
|
2011-09-21 02:20:40 +00:00
|
|
|
Normally a rescan is triggered automatically
|
|
|
|
by HP's Array Configuration Utility (either the GUI or the
|
|
|
|
command-line variety);
|
|
|
|
thus, for logical drive changes, the user should not
|
|
|
|
normally have to use this attribute.
|
|
|
|
This attribute may be useful when hot plugging devices like tape drives,
|
2014-01-03 00:59:03 +00:00
|
|
|
or entire storage boxes containing preconfigured logical drives.
|
2011-09-08 23:08:47 +00:00
|
|
|
.TP
|
|
|
|
.I /sys/class/scsi_host/host*/firmware_revision
|
2011-09-21 02:20:40 +00:00
|
|
|
This attribute contains the firmware version of the Smart Array.
|
2017-08-16 01:05:39 +00:00
|
|
|
.IP
|
2011-09-08 22:54:02 +00:00
|
|
|
For example:
|
2017-08-16 01:05:39 +00:00
|
|
|
.IP
|
_syscall.2, capget.2, ioprio_set.2, semop.2, send.2, ctime.3, dysize.3, fenv.3, fmtmsg.3, ftok.3, ftw.3, getaddrinfo.3, getgrent_r.3, gethostbyname.3, getopt.3, getpw.3, getpwent_r.3, getsubopt.3, getutent.3, glob.3, if_nameindex.3, inet.3, lseek64.3, malloc_hook.3, mbrtowc.3, mkstemp.3, mq_receive.3, mq_send.3, posix_spawn.3, putgrent.3, putpwent.3, qsort.3, raise.3, rand.3, rtime.3, setaliasent.3, setbuf.3, shm_open.3, significand.3, sigqueue.3, statvfs.3, strfromd.3, strptime.3, strtol.3, strtoul.3, termios.3, tgamma.3, timeradd.3, tsearch.3, tzset.3, updwtmp.3, usleep.3, wcstok.3, console_codes.4, hd.4, hpsa.4, mem.4, null.4, ram.4, sd.4, ttyS.4, filesystems.5, group.5, passwd.5, shells.5, termcap.5, ttytype.5, tzfile.5, utmp.5, ascii.7, bootparam.7, complex.7, cpuset.7, epoll.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-17 21:40:17 +00:00
|
|
|
.in +4n
|
|
|
|
.EX
|
|
|
|
# \fBcd /sys/class/scsi_host/host4\fP
|
|
|
|
# \fBcat firmware_revision\fP
|
|
|
|
7.14
|
|
|
|
.EE
|
|
|
|
.in
|
|
|
|
.\"
|
intro.1, time.1, _syscall.2, accept.2, brk.2, capget.2, faccessat.2, futimesat.2, gethostname.2, intro.2, ioprio_set.2, kill.2, madvise.2, mlock.2, mount.2, msgget.2, perf_event_open.2, poll.2, readv.2, sched_rr_get_interval.2, sched_setscheduler.2, select.2, select_tut.2, shmget.2, stat.2, timer_create.2, ustat.2, vfork.2, wait.2, alloca.3, atexit.3, catopen.3, crypt.3, dbopen.3, fenv.3, fopen.3, getaddrinfo_a.3, gethostbyname.3, getutent.3, intro.3, login.3, mallopt.3, queue.3, regex.3, sigpause.3, sigsetops.3, stdio.3, strftime.3, strptime.3, sysconf.3, ttyslot.3, undocumented.3, cciss.4, console_codes.4, hpsa.4, initrd.4, intro.4, rtc.4, st.4, tty_ioctl.4, wavelan.4, acct.5, charmap.5, dir_colors.5, hosts.5, intro.5, termcap.5, utmp.5, intro.6, armscii-8.7, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, ddp.7, epoll.7, glob.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man-pages.7, man.7, math_error.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, pthreads.7, raw.7, rtnetlink.7, signal.7, socket.7, spufs.7, svipc.7, tcp.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, intro.8: Global fix: use consistent capitalization in .SS headings
Capitalization in .SS sections across pages (and sometimes even
within a single page) is wildly inconsistent. Make it consistent.
Capitalize first word in heading, but otherwise use lower case,
except where English usage (e.g., proper nouns) or programming
language requirements (e.g., identifier names) dictate otherwise.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 14:08:38 +00:00
|
|
|
.SS HPSA-specific disk attribute files in /sys
|
2011-09-08 23:08:47 +00:00
|
|
|
.TP
|
|
|
|
.I /sys/class/scsi_disk/c:b:t:l/device/unique_id
|
2011-09-22 03:11:57 +00:00
|
|
|
This attribute contains a 32 hex-digit unique ID for each logical drive.
|
_syscall.2, capget.2, ioprio_set.2, semop.2, send.2, ctime.3, dysize.3, fenv.3, fmtmsg.3, ftok.3, ftw.3, getaddrinfo.3, getgrent_r.3, gethostbyname.3, getopt.3, getpw.3, getpwent_r.3, getsubopt.3, getutent.3, glob.3, if_nameindex.3, inet.3, lseek64.3, malloc_hook.3, mbrtowc.3, mkstemp.3, mq_receive.3, mq_send.3, posix_spawn.3, putgrent.3, putpwent.3, qsort.3, raise.3, rand.3, rtime.3, setaliasent.3, setbuf.3, shm_open.3, significand.3, sigqueue.3, statvfs.3, strfromd.3, strptime.3, strtol.3, strtoul.3, termios.3, tgamma.3, timeradd.3, tsearch.3, tzset.3, updwtmp.3, usleep.3, wcstok.3, console_codes.4, hd.4, hpsa.4, mem.4, null.4, ram.4, sd.4, ttyS.4, filesystems.5, group.5, passwd.5, shells.5, termcap.5, ttytype.5, tzfile.5, utmp.5, ascii.7, bootparam.7, complex.7, cpuset.7, epoll.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-17 21:40:17 +00:00
|
|
|
.IP
|
2011-09-08 22:54:02 +00:00
|
|
|
For example:
|
_syscall.2, capget.2, ioprio_set.2, semop.2, send.2, ctime.3, dysize.3, fenv.3, fmtmsg.3, ftok.3, ftw.3, getaddrinfo.3, getgrent_r.3, gethostbyname.3, getopt.3, getpw.3, getpwent_r.3, getsubopt.3, getutent.3, glob.3, if_nameindex.3, inet.3, lseek64.3, malloc_hook.3, mbrtowc.3, mkstemp.3, mq_receive.3, mq_send.3, posix_spawn.3, putgrent.3, putpwent.3, qsort.3, raise.3, rand.3, rtime.3, setaliasent.3, setbuf.3, shm_open.3, significand.3, sigqueue.3, statvfs.3, strfromd.3, strptime.3, strtol.3, strtoul.3, termios.3, tgamma.3, timeradd.3, tsearch.3, tzset.3, updwtmp.3, usleep.3, wcstok.3, console_codes.4, hd.4, hpsa.4, mem.4, null.4, ram.4, sd.4, ttyS.4, filesystems.5, group.5, passwd.5, shells.5, termcap.5, ttytype.5, tzfile.5, utmp.5, ascii.7, bootparam.7, complex.7, cpuset.7, epoll.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-17 21:40:17 +00:00
|
|
|
.IP
|
|
|
|
.in +4n
|
|
|
|
.EX
|
|
|
|
# \fBcd /sys/class/scsi_disk/4:0:0:0/device\fP
|
|
|
|
# \fBcat unique_id\fP
|
|
|
|
600508B1001044395355323037570F77
|
|
|
|
.EE
|
|
|
|
.in
|
2011-09-08 23:08:47 +00:00
|
|
|
.TP
|
|
|
|
.I /sys/class/scsi_disk/c:b:t:l/device/raid_level
|
2011-09-21 02:20:40 +00:00
|
|
|
This attribute contains the RAID level of each logical drive.
|
_syscall.2, capget.2, ioprio_set.2, semop.2, send.2, ctime.3, dysize.3, fenv.3, fmtmsg.3, ftok.3, ftw.3, getaddrinfo.3, getgrent_r.3, gethostbyname.3, getopt.3, getpw.3, getpwent_r.3, getsubopt.3, getutent.3, glob.3, if_nameindex.3, inet.3, lseek64.3, malloc_hook.3, mbrtowc.3, mkstemp.3, mq_receive.3, mq_send.3, posix_spawn.3, putgrent.3, putpwent.3, qsort.3, raise.3, rand.3, rtime.3, setaliasent.3, setbuf.3, shm_open.3, significand.3, sigqueue.3, statvfs.3, strfromd.3, strptime.3, strtol.3, strtoul.3, termios.3, tgamma.3, timeradd.3, tsearch.3, tzset.3, updwtmp.3, usleep.3, wcstok.3, console_codes.4, hd.4, hpsa.4, mem.4, null.4, ram.4, sd.4, ttyS.4, filesystems.5, group.5, passwd.5, shells.5, termcap.5, ttytype.5, tzfile.5, utmp.5, ascii.7, bootparam.7, complex.7, cpuset.7, epoll.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-17 21:40:17 +00:00
|
|
|
.IP
|
2011-09-08 22:54:02 +00:00
|
|
|
For example:
|
_syscall.2, capget.2, ioprio_set.2, semop.2, send.2, ctime.3, dysize.3, fenv.3, fmtmsg.3, ftok.3, ftw.3, getaddrinfo.3, getgrent_r.3, gethostbyname.3, getopt.3, getpw.3, getpwent_r.3, getsubopt.3, getutent.3, glob.3, if_nameindex.3, inet.3, lseek64.3, malloc_hook.3, mbrtowc.3, mkstemp.3, mq_receive.3, mq_send.3, posix_spawn.3, putgrent.3, putpwent.3, qsort.3, raise.3, rand.3, rtime.3, setaliasent.3, setbuf.3, shm_open.3, significand.3, sigqueue.3, statvfs.3, strfromd.3, strptime.3, strtol.3, strtoul.3, termios.3, tgamma.3, timeradd.3, tsearch.3, tzset.3, updwtmp.3, usleep.3, wcstok.3, console_codes.4, hd.4, hpsa.4, mem.4, null.4, ram.4, sd.4, ttyS.4, filesystems.5, group.5, passwd.5, shells.5, termcap.5, ttytype.5, tzfile.5, utmp.5, ascii.7, bootparam.7, complex.7, cpuset.7, epoll.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-17 21:40:17 +00:00
|
|
|
.IP
|
|
|
|
.in +4n
|
|
|
|
.EX
|
|
|
|
# \fBcd /sys/class/scsi_disk/4:0:0:0/device\fP
|
|
|
|
# \fBcat raid_level\fP
|
|
|
|
RAID 0
|
|
|
|
.EE
|
|
|
|
.in
|
2011-09-08 23:08:47 +00:00
|
|
|
.TP
|
|
|
|
.I /sys/class/scsi_disk/c:b:t:l/device/lunid
|
2011-09-22 03:11:57 +00:00
|
|
|
This attribute contains the 16 hex-digit (8 byte) LUN ID
|
|
|
|
by which a logical drive or physical device can be addressed.
|
2011-09-21 02:20:40 +00:00
|
|
|
.IR c : b : t : l
|
fcntl.2, msgget.2, ptrace.2, request_key.2, shmget.2, sigaction.2, syscalls.2, dbopen.3, euidaccess.3, getgrnam.3, getpwnam.3, strfmon.3, strtol.3, strtoul.3, cciss.4, hpsa.4, mouse.4, termcap.5, charsets.7, iso_8859-16.7, iso_8859-2.7, koi8-r.7, unicode.7, utf-8.7: Use Oxford comma
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-02-05 15:09:11 +00:00
|
|
|
are the controller, bus, target, and lun of the device.
|
_syscall.2, capget.2, ioprio_set.2, semop.2, send.2, ctime.3, dysize.3, fenv.3, fmtmsg.3, ftok.3, ftw.3, getaddrinfo.3, getgrent_r.3, gethostbyname.3, getopt.3, getpw.3, getpwent_r.3, getsubopt.3, getutent.3, glob.3, if_nameindex.3, inet.3, lseek64.3, malloc_hook.3, mbrtowc.3, mkstemp.3, mq_receive.3, mq_send.3, posix_spawn.3, putgrent.3, putpwent.3, qsort.3, raise.3, rand.3, rtime.3, setaliasent.3, setbuf.3, shm_open.3, significand.3, sigqueue.3, statvfs.3, strfromd.3, strptime.3, strtol.3, strtoul.3, termios.3, tgamma.3, timeradd.3, tsearch.3, tzset.3, updwtmp.3, usleep.3, wcstok.3, console_codes.4, hd.4, hpsa.4, mem.4, null.4, ram.4, sd.4, ttyS.4, filesystems.5, group.5, passwd.5, shells.5, termcap.5, ttytype.5, tzfile.5, utmp.5, ascii.7, bootparam.7, complex.7, cpuset.7, epoll.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-17 21:40:17 +00:00
|
|
|
.PP
|
2011-09-08 22:54:02 +00:00
|
|
|
For example:
|
_syscall.2, capget.2, ioprio_set.2, semop.2, send.2, ctime.3, dysize.3, fenv.3, fmtmsg.3, ftok.3, ftw.3, getaddrinfo.3, getgrent_r.3, gethostbyname.3, getopt.3, getpw.3, getpwent_r.3, getsubopt.3, getutent.3, glob.3, if_nameindex.3, inet.3, lseek64.3, malloc_hook.3, mbrtowc.3, mkstemp.3, mq_receive.3, mq_send.3, posix_spawn.3, putgrent.3, putpwent.3, qsort.3, raise.3, rand.3, rtime.3, setaliasent.3, setbuf.3, shm_open.3, significand.3, sigqueue.3, statvfs.3, strfromd.3, strptime.3, strtol.3, strtoul.3, termios.3, tgamma.3, timeradd.3, tsearch.3, tzset.3, updwtmp.3, usleep.3, wcstok.3, console_codes.4, hd.4, hpsa.4, mem.4, null.4, ram.4, sd.4, ttyS.4, filesystems.5, group.5, passwd.5, shells.5, termcap.5, ttytype.5, tzfile.5, utmp.5, ascii.7, bootparam.7, complex.7, cpuset.7, epoll.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-17 21:40:17 +00:00
|
|
|
.IP
|
|
|
|
.in +4n
|
|
|
|
.EX
|
|
|
|
# \fBcd /sys/class/scsi_disk/4:0:0:0/device\fP
|
|
|
|
# \fBcat lunid\fP
|
|
|
|
0x0000004000000000
|
|
|
|
.EE
|
|
|
|
.in
|
|
|
|
.\"
|
2011-09-08 23:08:47 +00:00
|
|
|
.SS Supported ioctl() operations
|
2011-09-21 02:20:40 +00:00
|
|
|
For compatibility with applications written for the
|
|
|
|
.BR cciss (4)
|
|
|
|
driver, many, but
|
|
|
|
not all of the ioctls supported by the
|
|
|
|
.BR cciss (4)
|
|
|
|
driver are also supported by the
|
|
|
|
.B hpsa
|
|
|
|
driver.
|
|
|
|
The data structures used by these ioctls are described in
|
bdflush.2, get_robust_list.2, kexec_load.2, madvise.2, mmap.2, mount.2, prctl.2, query_module.2, rt_sigqueueinfo.2, shmget.2, sigaction.2, syscalls.2, umount.2, malloc.3, hpsa.4, initrd.4, proc.5, bootparam.7, icmp.7, netlink.7, signal.7: Global fix: use "Linux kernel source" consistently
Rather than "kernel source".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-09-24 08:02:34 +00:00
|
|
|
the Linux kernel source file
|
2011-09-08 23:08:47 +00:00
|
|
|
.IR include/linux/cciss_ioctl.h .
|
|
|
|
.TP
|
|
|
|
.BR CCISS_DEREGDISK ", " CCISS_REGNEWDISK ", " CCISS_REGNEWD
|
2011-09-21 02:20:40 +00:00
|
|
|
These three ioctls all do exactly the same thing,
|
2011-09-08 23:08:47 +00:00
|
|
|
which is to cause the driver to rescan for new devices.
|
|
|
|
This does exactly the same thing as writing to the
|
|
|
|
hpsa-specific host "rescan" attribute.
|
|
|
|
.TP
|
|
|
|
.B CCISS_GETPCIINFO
|
2011-09-08 22:54:02 +00:00
|
|
|
Returns PCI domain, bus, device and function and "board ID" (PCI subsystem ID).
|
2011-09-08 23:08:47 +00:00
|
|
|
.TP
|
|
|
|
.B CCISS_GETDRIVVER
|
2011-09-08 22:54:02 +00:00
|
|
|
Returns driver version in three bytes encoded as:
|
_syscall.2, capget.2, ioprio_set.2, semop.2, send.2, ctime.3, dysize.3, fenv.3, fmtmsg.3, ftok.3, ftw.3, getaddrinfo.3, getgrent_r.3, gethostbyname.3, getopt.3, getpw.3, getpwent_r.3, getsubopt.3, getutent.3, glob.3, if_nameindex.3, inet.3, lseek64.3, malloc_hook.3, mbrtowc.3, mkstemp.3, mq_receive.3, mq_send.3, posix_spawn.3, putgrent.3, putpwent.3, qsort.3, raise.3, rand.3, rtime.3, setaliasent.3, setbuf.3, shm_open.3, significand.3, sigqueue.3, statvfs.3, strfromd.3, strptime.3, strtol.3, strtoul.3, termios.3, tgamma.3, timeradd.3, tsearch.3, tzset.3, updwtmp.3, usleep.3, wcstok.3, console_codes.4, hd.4, hpsa.4, mem.4, null.4, ram.4, sd.4, ttyS.4, filesystems.5, group.5, passwd.5, shells.5, termcap.5, ttytype.5, tzfile.5, utmp.5, ascii.7, bootparam.7, complex.7, cpuset.7, epoll.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-17 21:40:17 +00:00
|
|
|
.IP
|
|
|
|
.in +4n
|
|
|
|
.EX
|
|
|
|
(major_version << 16) | (minor_version << 8) |
|
|
|
|
(subminor_version)
|
|
|
|
.EE
|
|
|
|
.in
|
2011-09-08 23:08:47 +00:00
|
|
|
.TP
|
|
|
|
.BR CCISS_PASSTHRU ", " CCISS_BIG_PASSTHRU
|
2011-09-08 22:54:02 +00:00
|
|
|
Allows "BMIC" and "CISS" commands to be passed through to the Smart Array.
|
2011-09-22 03:11:57 +00:00
|
|
|
These are used extensively by the HP Array Configuration Utility,
|
madvise.2, perf_event_open.2, query_module.2, stat.2, sem_init.3, hpsa.4, rtc.4, st.4, elf.5, filesystems.5, proc.5, environ.7, man-pages.7, regex.7, units.7: Reword to avoid use of "etc."
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-01-18 10:58:39 +00:00
|
|
|
SNMP storage agents, and so on.
|
2011-09-08 23:08:47 +00:00
|
|
|
See
|
2011-09-21 02:20:40 +00:00
|
|
|
.I cciss_vol_status
|
|
|
|
at
|
capget.2, futex.2, sched_setscheduler.2, spu_create.2, spu_run.2, vfork.2, getnameinfo.3, netlink.3, cciss.4, console_codes.4, dsp56k.4, hpsa.4, sk98lin.4, filesystems.5, protocols.5, aio.7, capabilities.7, charsets.7, feature_test_macros.7, futex.7, hier.7, iso_8859-16.7, iso_8859-2.7, koi8-r.7, libc.7, man.7, netlink.7, numa.7, standards.7, unicode.7, units.7, uri.7, x25.7: Global fix: use UR macro where applicable
The syntax .UR http://example.com paired with .UE will create
links which one can interact, if the pager allows that. One
way to see the effect is ask the man(1) command to use browser
display, e.g.:
man -H man7/uri.7
("\:" is optional groff syntax to permit hyphenless line breaks.)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-08-13 08:02:36 +00:00
|
|
|
.UR http://cciss.sf.net
|
|
|
|
.UE
|
2011-09-08 23:08:47 +00:00
|
|
|
for some examples.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH SEE ALSO
|
2011-09-08 23:08:47 +00:00
|
|
|
.BR cciss (4),
|
|
|
|
.BR sd (4),
|
|
|
|
.BR st (4),
|
|
|
|
.BR cciss_vol_status (8),
|
|
|
|
.BR hpacucli (8),
|
|
|
|
.BR hpacuxe (8),
|
2017-08-16 01:05:39 +00:00
|
|
|
.PP
|
capget.2, futex.2, sched_setscheduler.2, spu_create.2, spu_run.2, vfork.2, getnameinfo.3, netlink.3, cciss.4, console_codes.4, dsp56k.4, hpsa.4, sk98lin.4, filesystems.5, protocols.5, aio.7, capabilities.7, charsets.7, feature_test_macros.7, futex.7, hier.7, iso_8859-16.7, iso_8859-2.7, koi8-r.7, libc.7, man.7, netlink.7, numa.7, standards.7, unicode.7, units.7, uri.7, x25.7: Global fix: use UR macro where applicable
The syntax .UR http://example.com paired with .UE will create
links which one can interact, if the pager allows that. One
way to see the effect is ask the man(1) command to use browser
display, e.g.:
man -H man7/uri.7
("\:" is optional groff syntax to permit hyphenless line breaks.)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-08-13 08:02:36 +00:00
|
|
|
.UR http://cciss.sf.net
|
|
|
|
.UE ,
|
2012-10-15 09:13:31 +00:00
|
|
|
and
|
2011-09-08 23:08:47 +00:00
|
|
|
.I Documentation/scsi/hpsa.txt
|
|
|
|
and
|
|
|
|
.I Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
|
arch_prctl.2, fcntl.2, flock.2, get_robust_list.2, getpriority.2, ioprio_set.2, migrate_pages.2, mmap.2, mremap.2, msync.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, socket.2, subpage_prot.2, unshare.2, btree.3, dbopen.3, dl_iterate_phdr.3, dlopen.3, getnameinfo.3, hash.3, lockf.3, netlink.3, recno.3, rpc.3, xdr.3, cciss.4, console_ioctl.4, hpsa.4, initrd.4, msr.4, rtc.4, st.4, hosts.5, services.5, tzfile.5, aio.7, arp.7, capabilities.7, cpuset.7, feature_test_macros.7, futex.7, inotify.7, ip.7, ipv6.7, iso_8859-16.7, iso_8859-2.7, koi8-r.7, math_error.7, netlink.7, packet.7, pthreads.7, raw.7, spufs.7, udplite.7, uri.7, x25.7: Global fix: Various consistency fixes for SEE ALSO
Coauthored-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-09-24 07:53:22 +00:00
|
|
|
in the Linux kernel source tree
|
2011-09-08 23:09:19 +00:00
|
|
|
.\" .SH AUTHORS
|
|
|
|
.\" Don Brace, Steve Cameron, Tom Lawler, Mike Miller, Scott Teel
|
|
|
|
.\" and probably some other people.
|