2008-01-09 10:17:51 +00:00
|
|
|
.\" Copyright (C) 2005, 2008, Michael Kerrisk <mtk.manpages@gmail.com>
|
|
|
|
.\" (A few fragments remain from an earlier (1992) version by
|
|
|
|
.\" Drew Eckhardt <drew@cs.colorado.edu>.)
|
2004-11-03 13:51:07 +00:00
|
|
|
.\"
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:01 +00:00
|
|
|
.\" %%%LICENSE_START(VERBATIM)
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Permission is granted to make and distribute verbatim copies of this
|
|
|
|
.\" manual provided the copyright notice and this permission notice are
|
|
|
|
.\" preserved on all copies.
|
|
|
|
.\"
|
|
|
|
.\" Permission is granted to copy and distribute modified versions of this
|
|
|
|
.\" manual under the conditions for verbatim copying, provided that the
|
|
|
|
.\" entire resulting derived work is distributed under the terms of a
|
|
|
|
.\" permission notice identical to this one.
|
2007-04-12 22:42:49 +00:00
|
|
|
.\"
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Since the Linux kernel and libraries are constantly changing, this
|
|
|
|
.\" manual page may be incorrect or out-of-date. The author(s) assume no
|
|
|
|
.\" responsibility for errors or omissions, or for damages resulting from
|
|
|
|
.\" the use of the information contained herein. The author(s) may not
|
|
|
|
.\" have taken the same level of care in the production of this manual,
|
|
|
|
.\" which is licensed free of charge, as they might when working
|
|
|
|
.\" professionally.
|
2007-04-12 22:42:49 +00:00
|
|
|
.\"
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Formatted or processed versions of this manual, if unaccompanied by
|
|
|
|
.\" the source, must acknowledge the copyright and authors of this work.
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:40 +00:00
|
|
|
.\" %%%LICENSE_END
|
2004-11-03 13:51:07 +00:00
|
|
|
.\"
|
|
|
|
.\" Modified by Michael Haardt <michael@moria.de>
|
|
|
|
.\" Modified 1993-07-23 by Rik Faith <faith@cs.unc.edu>
|
|
|
|
.\" Modified 1996-10-22 by Eric S. Raymond <esr@thyrsus.com>
|
2007-09-20 06:52:22 +00:00
|
|
|
.\" Modified 2004-06-17 by Michael Kerrisk <mtk.manpages@gmail.com>
|
2008-01-09 10:17:51 +00:00
|
|
|
.\" Modified 2005, mtk: added an example program
|
|
|
|
.\" Modified 2008-01-09, mtk: rewrote DESCRIPTION; minor additions
|
|
|
|
.\" to EXAMPLE text.
|
2008-10-10 06:10:48 +00:00
|
|
|
.\" 2008-10-10, mtk: add description of pipe2()
|
2004-11-03 13:51:07 +00:00
|
|
|
.\"
|
getent.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, mtrace.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, add_key.2, adjtimex.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, bpf.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, close_range.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fanotify_init.2, fanotify_mark.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_rm_watch.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_console.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_fslabel.2, ioctl_getfsmap.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, open_by_handle_at.2, openat2.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pidfd_getfd.2, pidfd_open.2, pidfd_send_signal.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, restart_syscall.2, rmdir.2, rt_sigqueueinfo.2, s390_guarded_storage.2, s390_pci_mmio_write.2, s390_runtime_instr.2, s390_sthyi.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, stime.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscall.2, syscalls.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, circleq.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, fileno.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fopencookie.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getutmp.3, getw.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, list.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setsigmask_np.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_mutex_consistent.3, pthread_mutexattr_getpshared.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, readdir_r.3, realpath.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, slist.3, sockatmark.3, sqrt.3, stailq.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tailq.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console_codes.4, dsp56k.4, hpsa.4, initrd.4, loop.4, lp.4, msr.4, random.4, rtc.4, smartpqi.4, veth.4, wavelan.4, acct.5, core.5, elf.5, hosts.5, locale.5, proc.5, resolv.conf.5, rpc.5, slabinfo.5, sysfs.5, tmpfs.5, utmp.5, address_families.7, aio.7, attributes.7, bootparam.7, capabilities.7, cgroups.7, complex.7, ddp.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, hier.7, inode.7, inotify.7, ip.7, ipv6.7, keyrings.7, locale.7, man-pages.7, man.7, math_error.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, numa.7, packet.7, pkeys.7, pthreads.7, queue.7, raw.7, rtnetlink.7, sched.7, session-keyring.7, shm_overview.7, sigevent.7, signal-safety.7, signal.7, sock_diag.7, socket.7, spufs.7, symlink.7, system_data_types.7, tcp.7, time_namespaces.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, user_namespaces.7, vdso.7, vsock.7, x25.7, iconvconfig.8, ld.so.8, ldconfig.8, sln.8, tzselect.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-03-21 23:15:34 +00:00
|
|
|
.TH PIPE 2 2021-03-22 "Linux" "Linux Programmer's Manual"
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH NAME
|
2008-10-10 06:10:48 +00:00
|
|
|
pipe, pipe2 \- create pipe
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH SYNOPSIS
|
2008-10-10 06:10:48 +00:00
|
|
|
.nf
|
2004-11-03 13:51:07 +00:00
|
|
|
.B #include <unistd.h>
|
2017-08-13 20:35:43 +00:00
|
|
|
.PP
|
2021-05-10 17:55:41 +00:00
|
|
|
.BI "int pipe(int " pipefd [2]);
|
2020-12-22 19:17:46 +00:00
|
|
|
.PP
|
accept.2, clone.2, dup.2, fallocate.2, pipe.2, readahead.2, sched_setaffinity.2, unshare.2, CPU_SET.3, endian.3, euidaccess.3, fexecve.3, getpt.3, getpw.3, getumask.3, getutmp.3, gnu_get_libc_version.3, makedev.3, matherr.3, mbsnrtowcs.3, memfrob.3, pthread_attr_setaffinity_np.3, pthread_getattr_np.3, pthread_setaffinity_np.3, pthread_tryjoin_np.3, tcgetsid.3, wcscasecmp.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wcswidth.3, rtld-audit.7: SYNOPSIS: Add reference to feature_test_macros(7)
These pages specify feature test macros in the function
prototypes. Add a reference to feature_test_macros(7),
so that readers are pointed to the information that
feature test macros must be defined before including
*any* header file.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-09-10 05:06:22 +00:00
|
|
|
.BR "#define _GNU_SOURCE" " /* See feature_test_macros(7) */"
|
2021-05-10 17:55:41 +00:00
|
|
|
.BR "#include <fcntl.h>" " /* Definition of " O_* " constants */"
|
2008-10-10 06:10:48 +00:00
|
|
|
.B #include <unistd.h>
|
2017-08-13 20:35:43 +00:00
|
|
|
.PP
|
2008-11-04 14:16:00 +00:00
|
|
|
.BI "int pipe2(int " pipefd "[2], int " flags );
|
2021-04-06 11:36:25 +00:00
|
|
|
.PP
|
|
|
|
/* On Alpha, IA-64, MIPS, SuperH, and SPARC/SPARC64, pipe() has the
|
|
|
|
following prototype; see NOTES */
|
|
|
|
.PP
|
|
|
|
.B #include <unistd.h>
|
|
|
|
.PP
|
|
|
|
.B struct fd_pair {
|
|
|
|
.B " long fd[2];"
|
|
|
|
.B "};"
|
2021-06-12 08:31:22 +00:00
|
|
|
.B struct fd_pair pipe(void);
|
2008-10-10 06:10:48 +00:00
|
|
|
.fi
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH DESCRIPTION
|
2005-10-19 06:54:38 +00:00
|
|
|
.BR pipe ()
|
2008-01-09 10:17:51 +00:00
|
|
|
creates a pipe, a unidirectional data channel that
|
|
|
|
can be used for interprocess communication.
|
|
|
|
The array
|
|
|
|
.IR pipefd
|
|
|
|
is used to return two file descriptors referring to the ends of the pipe.
|
|
|
|
.IR pipefd[0]
|
|
|
|
refers to the read end of the pipe.
|
|
|
|
.IR pipefd[1]
|
|
|
|
refers to the write end of the pipe.
|
|
|
|
Data written to the write end of the pipe is buffered by the kernel
|
|
|
|
until it is read from the read end of the pipe.
|
|
|
|
For further details, see
|
|
|
|
.BR pipe (7).
|
2017-08-13 20:35:43 +00:00
|
|
|
.PP
|
2008-10-10 06:10:48 +00:00
|
|
|
If
|
|
|
|
.IR flags
|
|
|
|
is 0, then
|
|
|
|
.BR pipe2 ()
|
|
|
|
is the same as
|
|
|
|
.BR pipe ().
|
|
|
|
The following values can be bitwise ORed in
|
|
|
|
.IR flags
|
|
|
|
to obtain different behavior:
|
2014-02-11 08:55:41 +00:00
|
|
|
.TP
|
2008-10-10 06:10:48 +00:00
|
|
|
.B O_CLOEXEC
|
2008-10-10 09:32:39 +00:00
|
|
|
Set the close-on-exec
|
2008-10-11 04:49:22 +00:00
|
|
|
.RB ( FD_CLOEXEC )
|
2008-10-10 09:32:39 +00:00
|
|
|
flag on the two new file descriptors.
|
2008-10-10 06:10:48 +00:00
|
|
|
See the description of the same flag in
|
|
|
|
.BR open (2)
|
|
|
|
for reasons why this may be useful.
|
2014-02-11 08:18:02 +00:00
|
|
|
.TP
|
2014-02-11 08:53:56 +00:00
|
|
|
.BR O_DIRECT " (since Linux 3.4)"
|
|
|
|
.\" commit 9883035ae7edef3ec62ad215611cb8e17d6a1a5d
|
|
|
|
Create a pipe that performs I/O in "packet" mode.
|
|
|
|
Each
|
|
|
|
.BR write (2)
|
|
|
|
to the pipe is dealt with as a separate packet, and
|
|
|
|
.BR read (2)s
|
|
|
|
from the pipe will read one packet at a time.
|
|
|
|
Note the following points:
|
|
|
|
.RS
|
|
|
|
.IP * 3
|
|
|
|
Writes of greater than
|
|
|
|
.BR PIPE_BUF
|
|
|
|
bytes (see
|
|
|
|
.BR pipe (7))
|
|
|
|
will be split into multiple packets.
|
2014-07-06 13:44:10 +00:00
|
|
|
The constant
|
|
|
|
.BR PIPE_BUF
|
|
|
|
is defined in
|
|
|
|
.IR <limits.h> .
|
2014-02-11 08:53:56 +00:00
|
|
|
.IP *
|
|
|
|
If a
|
|
|
|
.BR read (2)
|
|
|
|
specifies a buffer size that is smaller than the next packet,
|
|
|
|
then the requested number of bytes are read,
|
|
|
|
and the excess bytes in the packet are discarded.
|
|
|
|
Specifying a buffer size of
|
|
|
|
.BR PIPE_BUF
|
|
|
|
will be sufficient to read the largest possible packets
|
|
|
|
(see the previous point).
|
|
|
|
.IP *
|
|
|
|
Zero-length packets are not supported.
|
|
|
|
(A
|
|
|
|
.BR read (2)
|
|
|
|
that specifies a buffer size of zero is a no-op, and returns 0.)
|
|
|
|
.RE
|
|
|
|
.IP
|
|
|
|
Older kernels that do not support this flag will indicate this via an
|
|
|
|
.B EINVAL
|
|
|
|
error.
|
2017-11-23 12:35:01 +00:00
|
|
|
.IP
|
|
|
|
Since Linux 4.5,
|
|
|
|
.\" commit 0dbf5f20652108106cb822ad7662c786baaa03ff
|
|
|
|
.\" FIXME . But, it is not possible to specify O_DIRECT when opening a FIFO
|
|
|
|
it is possible to change the
|
|
|
|
.B O_DIRECT
|
|
|
|
setting of a pipe file descriptor using
|
|
|
|
.BR fcntl (2).
|
2014-02-11 08:53:56 +00:00
|
|
|
.TP
|
2014-02-11 08:18:02 +00:00
|
|
|
.B O_NONBLOCK
|
|
|
|
Set the
|
|
|
|
.BR O_NONBLOCK
|
2018-12-01 08:42:01 +00:00
|
|
|
file status flag on the open file descriptions
|
|
|
|
referred to by the new file descriptors.
|
2014-02-11 08:18:02 +00:00
|
|
|
Using this flag saves extra calls to
|
|
|
|
.BR fcntl (2)
|
|
|
|
to achieve the same result.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH RETURN VALUE
|
2007-04-12 22:42:49 +00:00
|
|
|
On success, zero is returned.
|
2019-03-17 19:56:50 +00:00
|
|
|
On error, \-1 is returned,
|
2004-11-03 13:51:07 +00:00
|
|
|
.I errno
|
2021-01-07 08:22:57 +00:00
|
|
|
is set to indicate the error, and
|
2019-03-17 19:56:50 +00:00
|
|
|
.I pipefd
|
|
|
|
is left unchanged.
|
2017-08-13 20:35:43 +00:00
|
|
|
.PP
|
2012-03-29 22:41:57 +00:00
|
|
|
On Linux (and other systems),
|
|
|
|
.BR pipe ()
|
|
|
|
does not modify
|
|
|
|
.I pipefd
|
|
|
|
on failure.
|
2020-05-26 11:09:31 +00:00
|
|
|
A requirement standardizing this behavior was added in POSIX.1-2008 TC2.
|
2012-03-29 22:41:57 +00:00
|
|
|
.\" http://austingroupbugs.net/view.php?id=467
|
|
|
|
The Linux-specific
|
|
|
|
.BR pipe2 ()
|
|
|
|
system call
|
|
|
|
likewise does not modify
|
|
|
|
.I pipefd
|
|
|
|
on failure.
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH ERRORS
|
|
|
|
.TP
|
|
|
|
.B EFAULT
|
2007-12-24 22:02:58 +00:00
|
|
|
.I pipefd
|
2004-11-03 13:51:07 +00:00
|
|
|
is not valid.
|
|
|
|
.TP
|
2008-10-10 06:10:48 +00:00
|
|
|
.B EINVAL
|
|
|
|
.RB ( pipe2 ())
|
|
|
|
Invalid value in
|
|
|
|
.IR flags .
|
|
|
|
.TP
|
2004-11-03 13:51:07 +00:00
|
|
|
.B EMFILE
|
accept.2, dup.2, eventfd.2, execve.2, fcntl.2, memfd_create.2, open.2, perf_event_open.2, pipe.2, signalfd.2, socket.2, socketpair.2, spu_create.2, timerfd_create.2, getgrent.3, getgrnam.3, getlogin.3, getpwent.3, getpwnam.3, mq_open.3, opendir.3, sem_open.3, shm_open.3, tmpfile.3: ERRORS: standardize text for EMFILE error
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-27 15:35:01 +00:00
|
|
|
The per-process limit on the number of open file descriptors has been reached.
|
2004-11-03 13:51:07 +00:00
|
|
|
.TP
|
|
|
|
.B ENFILE
|
accept.2, acct.2, epoll_create.2, execve.2, futex.2, inotify_init.2, mmap.2, open.2, pipe.2, shmget.2, socket.2, socketpair.2, spu_create.2, swapon.2, uselib.2, getgrent.3, getgrnam.3, getlogin.3, getpwent.3, getpwnam.3, mq_open.3, opendir.3, sem_open.3, shm_open.3, tmpfile.3, fanotify.7: ERRORS: standardize text for ENFILE error
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-27 16:10:23 +00:00
|
|
|
The system-wide limit on the total number of open files has been reached.
|
2016-08-13 20:39:21 +00:00
|
|
|
.TP
|
|
|
|
.B ENFILE
|
|
|
|
The user hard limit on memory that can be allocated for pipes
|
|
|
|
has been reached and the caller is not privileged; see
|
|
|
|
.BR pipe (7).
|
2008-10-10 06:10:48 +00:00
|
|
|
.SH VERSIONS
|
|
|
|
.BR pipe2 ()
|
|
|
|
was added to Linux in version 2.6.27;
|
|
|
|
glibc support is available starting with
|
|
|
|
version 2.9.
|
2020-05-19 07:59:28 +00:00
|
|
|
.SH CONFORMING TO
|
|
|
|
.BR pipe ():
|
|
|
|
POSIX.1-2001, POSIX.1-2008.
|
|
|
|
.PP
|
|
|
|
.BR pipe2 ()
|
|
|
|
is Linux-specific.
|
2019-01-04 15:08:06 +00:00
|
|
|
.SH NOTES
|
|
|
|
.\" See http://math-atlas.sourceforge.net/devel/assembly/64.psabi.1.33.ps.Z
|
|
|
|
.\" for example, section 3.2.1 "Registers and the Stack Frame".
|
2020-04-19 20:17:03 +00:00
|
|
|
The System V ABI on some architectures allows the use of more than one register
|
2019-01-04 15:08:06 +00:00
|
|
|
for returning multiple values; several architectures
|
|
|
|
(namely, Alpha, IA-64, MIPS, SuperH, and SPARC/SPARC64)
|
2019-01-09 06:10:30 +00:00
|
|
|
(ab)use this feature in order to implement the
|
2019-01-04 15:08:06 +00:00
|
|
|
.BR pipe ()
|
2019-01-09 06:10:30 +00:00
|
|
|
system call in a functional manner:
|
|
|
|
the call doesn't take any arguments and returns
|
|
|
|
a pair of file descriptors as the return value on success.
|
2019-01-04 15:08:06 +00:00
|
|
|
The glibc
|
|
|
|
.BR pipe ()
|
2019-01-09 06:10:30 +00:00
|
|
|
wrapper function transparently deals with this.
|
2019-01-04 15:08:06 +00:00
|
|
|
See
|
|
|
|
.BR syscall (2)
|
|
|
|
for information regarding registers used for storing second file descriptor.
|
2020-05-21 08:00:37 +00:00
|
|
|
.SH EXAMPLES
|
2005-12-12 09:19:46 +00:00
|
|
|
.\" fork.2 refers to this example program.
|
2007-04-12 22:42:49 +00:00
|
|
|
The following program creates a pipe, and then
|
|
|
|
.BR fork (2)s
|
2008-01-09 10:17:51 +00:00
|
|
|
to create a child process;
|
|
|
|
the child inherits a duplicate set of file
|
|
|
|
descriptors that refer to the same pipe.
|
2007-04-12 22:42:49 +00:00
|
|
|
After the
|
2005-12-09 14:24:10 +00:00
|
|
|
.BR fork (2),
|
2016-01-01 10:45:50 +00:00
|
|
|
each process closes the file descriptors that it doesn't need for the pipe
|
2007-04-12 22:42:49 +00:00
|
|
|
(see
|
2005-12-09 14:24:10 +00:00
|
|
|
.BR pipe (7)).
|
2007-04-12 22:42:49 +00:00
|
|
|
The parent then writes the string contained in the program's
|
|
|
|
command-line argument to the pipe,
|
|
|
|
and the child reads this string a byte at a time from the pipe
|
2005-12-09 14:24:10 +00:00
|
|
|
and echoes it on standard output.
|
2014-01-05 00:24:26 +00:00
|
|
|
.SS Program source
|
2017-08-13 20:35:43 +00:00
|
|
|
.EX
|
2013-12-09 05:50:32 +00:00
|
|
|
#include <sys/types.h>
|
2005-12-09 14:24:10 +00:00
|
|
|
#include <sys/wait.h>
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <unistd.h>
|
|
|
|
#include <string.h>
|
|
|
|
|
|
|
|
int
|
|
|
|
main(int argc, char *argv[])
|
|
|
|
{
|
2007-12-24 22:02:58 +00:00
|
|
|
int pipefd[2];
|
2005-12-09 14:24:10 +00:00
|
|
|
pid_t cpid;
|
|
|
|
char buf;
|
|
|
|
|
execve.2, pipe.2, tee.2, fmemopen.3, mq_notify.3, qsort.3: Replace use of assert() by code that checks argc
See http://bugzilla.kernel.org/show_bug.cgi?id=13569
As noted by Andrey:
The purpose of the assert macro, defined in <assert.h>,
is to provide a tool to check for programming mistakes
or program logic errors. However, the assert macro must
never be used to perform checks for run time errors,
since, with the NDEBUG macro defined, expressions within
the assert macro invocations are not evaluated/checked
for, resulting in behavior that was not originally intended.
...
The pages affected in the core package are
execve(2)
pipe(2)
tee(2)
fmemopen(3)
mq_notify(3)
qsort(3)
Reported-by: Andrey Vihrov <vihrov@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2009-09-15 04:46:16 +00:00
|
|
|
if (argc != 2) {
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
fprintf(stderr, "Usage: %s <string>\en", argv[0]);
|
execve.2, get_robust_list.2, getunwind.2, pipe.2, quotactl.2, clock_getcpuclockid.3, endian.3, fmemopen.3, getgrouplist.3, getservent_r.3, mq_notify.3, qsort.3, rtime.3, mailaddr.7: ffix: replace tabs with white space in code examples
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-01-18 07:45:45 +00:00
|
|
|
exit(EXIT_FAILURE);
|
execve.2, pipe.2, tee.2, fmemopen.3, mq_notify.3, qsort.3: Replace use of assert() by code that checks argc
See http://bugzilla.kernel.org/show_bug.cgi?id=13569
As noted by Andrey:
The purpose of the assert macro, defined in <assert.h>,
is to provide a tool to check for programming mistakes
or program logic errors. However, the assert macro must
never be used to perform checks for run time errors,
since, with the NDEBUG macro defined, expressions within
the assert macro invocations are not evaluated/checked
for, resulting in behavior that was not originally intended.
...
The pages affected in the core package are
execve(2)
pipe(2)
tee(2)
fmemopen(3)
mq_notify(3)
qsort(3)
Reported-by: Andrey Vihrov <vihrov@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2009-09-15 04:46:16 +00:00
|
|
|
}
|
2005-12-09 14:24:10 +00:00
|
|
|
|
2007-12-24 22:02:58 +00:00
|
|
|
if (pipe(pipefd) == \-1) {
|
2007-06-20 21:39:45 +00:00
|
|
|
perror("pipe");
|
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
2005-12-09 14:24:10 +00:00
|
|
|
|
|
|
|
cpid = fork();
|
2007-06-20 21:39:45 +00:00
|
|
|
if (cpid == \-1) {
|
|
|
|
perror("fork");
|
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
2005-12-09 14:24:10 +00:00
|
|
|
|
|
|
|
if (cpid == 0) { /* Child reads from pipe */
|
2007-12-24 22:02:58 +00:00
|
|
|
close(pipefd[1]); /* Close unused write end */
|
2005-12-09 14:24:10 +00:00
|
|
|
|
2007-12-24 22:02:58 +00:00
|
|
|
while (read(pipefd[0], &buf, 1) > 0)
|
2005-12-09 14:24:10 +00:00
|
|
|
write(STDOUT_FILENO, &buf, 1);
|
|
|
|
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
write(STDOUT_FILENO, "\en", 1);
|
2007-12-24 22:02:58 +00:00
|
|
|
close(pipefd[0]);
|
2005-12-09 14:24:10 +00:00
|
|
|
_exit(EXIT_SUCCESS);
|
|
|
|
|
|
|
|
} else { /* Parent writes argv[1] to pipe */
|
2007-12-24 22:02:58 +00:00
|
|
|
close(pipefd[0]); /* Close unused read end */
|
|
|
|
write(pipefd[1], argv[1], strlen(argv[1]));
|
|
|
|
close(pipefd[1]); /* Reader will see EOF */
|
|
|
|
wait(NULL); /* Wait for child */
|
2005-12-09 14:24:10 +00:00
|
|
|
exit(EXIT_SUCCESS);
|
|
|
|
}
|
|
|
|
}
|
2017-08-13 20:35:43 +00:00
|
|
|
.EE
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH SEE ALSO
|
2004-11-03 13:51:07 +00:00
|
|
|
.BR fork (2),
|
|
|
|
.BR read (2),
|
|
|
|
.BR socketpair (2),
|
2015-10-16 19:40:42 +00:00
|
|
|
.BR splice (2),
|
2017-06-14 11:21:04 +00:00
|
|
|
.BR tee (2),
|
|
|
|
.BR vmsplice (2),
|
2005-12-08 18:57:25 +00:00
|
|
|
.BR write (2),
|
2006-05-29 05:12:37 +00:00
|
|
|
.BR popen (3),
|
2005-12-08 18:57:25 +00:00
|
|
|
.BR pipe (7)
|