2004-11-03 13:51:07 +00:00
|
|
|
.\" Copyright (c) 1999 Andries Brouwer (aeb@cwi.nl), 1 Nov 1999
|
|
|
|
.\"
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:01 +00:00
|
|
|
.\" %%%LICENSE_START(VERBATIM)
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Permission is granted to make and distribute verbatim copies of this
|
|
|
|
.\" manual provided the copyright notice and this permission notice are
|
|
|
|
.\" preserved on all copies.
|
|
|
|
.\"
|
|
|
|
.\" Permission is granted to copy and distribute modified versions of this
|
|
|
|
.\" manual under the conditions for verbatim copying, provided that the
|
|
|
|
.\" entire resulting derived work is distributed under the terms of a
|
|
|
|
.\" permission notice identical to this one.
|
2007-04-12 22:42:49 +00:00
|
|
|
.\"
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Since the Linux kernel and libraries are constantly changing, this
|
|
|
|
.\" manual page may be incorrect or out-of-date. The author(s) assume no
|
|
|
|
.\" responsibility for errors or omissions, or for damages resulting from
|
|
|
|
.\" the use of the information contained herein. The author(s) may not
|
|
|
|
.\" have taken the same level of care in the production of this manual,
|
|
|
|
.\" which is licensed free of charge, as they might when working
|
|
|
|
.\" professionally.
|
2007-04-12 22:42:49 +00:00
|
|
|
.\"
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Formatted or processed versions of this manual, if unaccompanied by
|
|
|
|
.\" the source, must acknowledge the copyright and authors of this work.
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:40 +00:00
|
|
|
.\" %%%LICENSE_END
|
2004-11-03 13:51:07 +00:00
|
|
|
.\"
|
|
|
|
.\" 1999-11-10: Merged text taken from the page contributed by
|
|
|
|
.\" Reed H. Petty (rhp@draper.net)
|
|
|
|
.\"
|
locale.1, localedef.1, _exit.2, accept.2, access.2, acct.2, adjtimex.2, bdflush.2, bind.2, bpf.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_ctl.2, eventfd.2, execve.2, fallocate.2, fanotify_init.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, getdomainname.2, getgroups.2, gethostname.2, getpagesize.2, getpeername.2, getsid.2, getsockname.2, getsockopt.2, gettimeofday.2, init_module.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, kexec_load.2, kill.2, killpg.2, link.2, listen.2, llseek.2, lseek.2, madvise.2, memfd_create.2, mincore.2, mkdir.2, mknod.2, mmap.2, mount.2, nanosleep.2, nice.2, open.2, personality.2, pipe.2, poll.2, posix_fadvise.2, read.2, readahead.2, readlink.2, readv.2, recv.2, recvmmsg.2, rename.2, request_key.2, sched_setaffinity.2, sched_setattr.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendfile.2, sendmmsg.2, seteuid.2, setns.2, setpgid.2, setreuid.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigsuspend.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, symlink.2, sync.2, syscall.2, syscalls.2, times.2, truncate.2, unlink.2, unshare.2, uselib.2, utimensat.2, vfork.2, vhangup.2, wait.2, wait4.2, write.2, a64l.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_read.3, aio_write.3, asin.3, asinh.3, atan.3, atan2.3, atanh.3, atoi.3, backtrace.3, cbrt.3, ceil.3, cfree.3, clearenv.3, clock_getcpuclockid.3, clog10.3, cmsg.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, daemon.3, dirfd.3, div.3, dl_iterate_phdr.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, endian.3, erf.3, erfc.3, errno.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, ferror.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmin.3, fmod.3, fopen.3, fpclassify.3, frexp.3, fseeko.3, fts.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getline.3, getloadavg.3, getmntent.3, getnameinfo.3, getnetent_r.3, getpass.3, getprotoent_r.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getservent_r.3, getspnam.3, getsubopt.3, getusershell.3, getutent.3, getw.3, gsignal.3, hypot.3, ilogb.3, inet.3, initgroups.3, insque.3, isalpha.3, isgreater.3, iswblank.3, j0.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, makedev.3, matherr.3, mbsnrtowcs.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_receive.3, mq_send.3, nan.3, nextafter.3, on_exit.3, open_memstream.3, opendir.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, psignal.3, pthread_attr_setstack.3, pthread_setaffinity_np.3, putenv.3, putpwent.3, qecvt.3, rand.3, random.3, random_r.3, rcmd.3, readdir.3, realpath.3, remainder.3, remquo.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, scalb.3, scalbln.3, scandir.3, scanf.3, seekdir.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setnetgrent.3, siginterrupt.3, signbit.3, significand.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stpcpy.3, stpncpy.3, strdup.3, strerror.3, strftime.3, strlen.3, strnlen.3, strsep.3, strsignal.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, unlocked_stdio.3, usleep.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wprintf.3, y0.3, pts.4, st.4, tty_ioctl.4, elf.5, gai.conf.5, group.5, locale.5, nsswitch.conf.5, proc.5, utmp.5, aio.7, capabilities.7, credentials.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, mq_overview.7, namespaces.7, pipe.7, signal.7, socket.7, standards.7, svipc.7, symlink.7, time.7, unicode.7, unix.7: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-15 03:46:01 +00:00
|
|
|
.TH VFORK 2 2016-03-15 "Linux" "Linux Programmer's Manual"
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH NAME
|
|
|
|
vfork \- create a child process and block parent
|
|
|
|
.SH SYNOPSIS
|
|
|
|
.B #include <sys/types.h>
|
|
|
|
.br
|
|
|
|
.B #include <unistd.h>
|
|
|
|
.sp
|
|
|
|
.B pid_t vfork(void);
|
2007-07-08 12:11:40 +00:00
|
|
|
.sp
|
|
|
|
.in -4n
|
|
|
|
Feature Test Macro Requirements for glibc (see
|
|
|
|
.BR feature_test_macros (7)):
|
|
|
|
.in
|
|
|
|
.sp
|
|
|
|
.BR vfork ():
|
2010-09-17 15:22:01 +00:00
|
|
|
.ad l
|
|
|
|
.RS 4
|
|
|
|
.PD 0
|
|
|
|
.TP 4
|
|
|
|
Since glibc 2.12:
|
|
|
|
.nf
|
killpg.2, mknod.2, mmap.2, nice.2, readlink.2, seteuid.2, setpgid.2, setreuid.2, sigaltstack.2, symlink.2, sync.2, truncate.2, vfork.2, wait.2: Update FTM requirements (mainly _DEFAULT_SOURCE)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-02-12 14:58:03 +00:00
|
|
|
(_XOPEN_SOURCE\ >=\ 500) && ! (_POSIX_C_SOURCE\ >=\ 200809L)
|
|
|
|
|| /* Since glibc 2.19: */ _DEFAULT_SOURCE
|
|
|
|
|| /* Glibc versions <= 2.19: */ _BSD_SOURCE
|
2010-09-17 15:22:01 +00:00
|
|
|
.TP 4
|
|
|
|
.fi
|
|
|
|
Before glibc 2.12:
|
brk.2, chdir.2, chmod.2, chown.2, chroot.2, getpagesize.2, getsid.2, killpg.2, mknod.2, readlink.2, setpgid.2, setreuid.2, sigaltstack.2, stat.2, symlink.2, sync.2, truncate.2, vfork.2, wait.2, wait4.2, a64l.3, acosh.3, asinh.3, atanh.3, cbrt.3, ecvt.3, expm1.3, gcvt.3, getcwd.3, getdate.3, getdtablesize.3, getgrent.3, gethostid.3, getpass.3, getpwent.3, getsubopt.3, ilogb.3, insque.3, lockf.3, log1p.3, logb.3, mkstemp.3, mktemp.3, nextafter.3, posix_memalign.3, random.3, realpath.3, remainder.3, rint.3, scalb.3, siginterrupt.3, sigset.3, strdup.3, ualarm.3, usleep.3: Remove references to _XOPEN_SOURCE_EXTENDED in SYNOPSIS
_XOPEN_SOURCE_EXTENDED is obsolete (it existed in SUSv1, but not
subsequent standards). _XOPEN_SOURCE >= 500 produces the same
effects as (_XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED). Modifying
the SYNOPSIS of various ages that contain:
_XOPEN_SOURCE\ >=\ 500 ||
_XOPEN_SOURCE\ &&\ _XOPEN_SOURCE_EXTENDED
to just:
_XOPEN_SOURCE\ >=\ 500
This has the following benefits:
a) Simplifying the SYNOPSIS by removing ancient
historical information.
b) Preventing users from being misled into using
_XOPEN_SOURCE_EXTENDED in new source code.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-02-09 09:48:59 +00:00
|
|
|
_BSD_SOURCE || _XOPEN_SOURCE\ >=\ 500
|
|
|
|
.\" || _XOPEN_SOURCE\ &&\ _XOPEN_SOURCE_EXTENDED
|
2010-09-17 15:22:01 +00:00
|
|
|
.PD
|
|
|
|
.RE
|
|
|
|
.ad b
|
2007-05-16 02:45:55 +00:00
|
|
|
.SH DESCRIPTION
|
intro.1, time.1, _syscall.2, accept.2, capget.2, clone.2, execve.2, fcntl.2, intro.2, ioctl_list.2, ioprio_set.2, kill.2, mlock.2, nanosleep.2, perf_event_open.2, select.2, stat.2, times.2, ustat.2, vfork.2, wait.2, cfree.3, dbopen.3, dlopen.3, fenv.3, fmtmsg.3, gamma.3, getaddrinfo.3, gethostbyname.3, getnameinfo.3, getspnam.3, login.3, printf.3, regex.3, stdio.3, sysconf.3, termios.3, ttyslot.3, undocumented.3, wordexp.3, console_codes.4, initrd.4, mouse.4, random.4, st.4, tty_ioctl.4, wavelan.4, charmap.5, dir_colors.5, hosts.5, termcap.5, armscii-8.7, boot.7, bootparam.7, capabilities.7, charsets.7, ddp.7, futex.7, glob.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man.7, numa.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, rtnetlink.7, signal.7, time.7, udp.7, udplite.7, unicode.7, uri.7, utf-8.7: G;lobal fix: remove unneeded double quotes in .SS headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:02:18 +00:00
|
|
|
.SS Standard description
|
2008-10-29 13:33:00 +00:00
|
|
|
(From POSIX.1)
|
2004-11-03 13:51:07 +00:00
|
|
|
The
|
2005-07-06 06:52:35 +00:00
|
|
|
.BR vfork ()
|
2004-11-03 13:51:07 +00:00
|
|
|
function has the same effect as
|
2007-05-11 23:07:02 +00:00
|
|
|
.BR fork (2),
|
2007-06-08 09:56:56 +00:00
|
|
|
except that the behavior is undefined if the process created by
|
2005-07-06 06:52:35 +00:00
|
|
|
.BR vfork ()
|
2007-04-12 22:42:49 +00:00
|
|
|
either modifies any data other than a variable of type
|
|
|
|
.I pid_t
|
2006-07-22 14:07:21 +00:00
|
|
|
used to store the return value from
|
2005-07-06 06:52:35 +00:00
|
|
|
.BR vfork (),
|
2004-11-03 13:51:07 +00:00
|
|
|
or returns from the function in which
|
2005-07-06 06:52:35 +00:00
|
|
|
.BR vfork ()
|
2004-11-03 13:51:07 +00:00
|
|
|
was called, or calls any other function before successfully calling
|
2007-05-11 23:07:02 +00:00
|
|
|
.BR _exit (2)
|
2004-11-03 13:51:07 +00:00
|
|
|
or one of the
|
2007-05-21 21:07:25 +00:00
|
|
|
.BR exec (3)
|
2004-11-03 13:51:07 +00:00
|
|
|
family of functions.
|
intro.1, time.1, _syscall.2, accept.2, capget.2, clone.2, execve.2, fcntl.2, intro.2, ioctl_list.2, ioprio_set.2, kill.2, mlock.2, nanosleep.2, perf_event_open.2, select.2, stat.2, times.2, ustat.2, vfork.2, wait.2, cfree.3, dbopen.3, dlopen.3, fenv.3, fmtmsg.3, gamma.3, getaddrinfo.3, gethostbyname.3, getnameinfo.3, getspnam.3, login.3, printf.3, regex.3, stdio.3, sysconf.3, termios.3, ttyslot.3, undocumented.3, wordexp.3, console_codes.4, initrd.4, mouse.4, random.4, st.4, tty_ioctl.4, wavelan.4, charmap.5, dir_colors.5, hosts.5, termcap.5, armscii-8.7, boot.7, bootparam.7, capabilities.7, charsets.7, ddp.7, futex.7, glob.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man.7, numa.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, rtnetlink.7, signal.7, time.7, udp.7, udplite.7, unicode.7, uri.7, utf-8.7: G;lobal fix: remove unneeded double quotes in .SS headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:02:18 +00:00
|
|
|
.SS Linux description
|
2005-07-06 06:52:35 +00:00
|
|
|
.BR vfork (),
|
2004-11-03 13:51:07 +00:00
|
|
|
just like
|
|
|
|
.BR fork (2),
|
|
|
|
creates a child process of the calling process.
|
|
|
|
For details and return value and errors, see
|
|
|
|
.BR fork (2).
|
|
|
|
.PP
|
2005-07-06 06:52:35 +00:00
|
|
|
.BR vfork ()
|
2004-11-03 13:51:07 +00:00
|
|
|
is a special case of
|
|
|
|
.BR clone (2).
|
|
|
|
It is used to create new processes without copying the page tables of
|
2007-04-12 22:42:49 +00:00
|
|
|
the parent process.
|
2008-10-29 13:25:08 +00:00
|
|
|
It may be useful in performance-sensitive applications
|
2010-06-15 01:33:53 +00:00
|
|
|
where a child is created which then immediately issues an
|
2007-08-27 08:36:21 +00:00
|
|
|
.BR execve (2).
|
2004-11-03 13:51:07 +00:00
|
|
|
.PP
|
2005-07-06 06:52:35 +00:00
|
|
|
.BR vfork ()
|
2007-04-12 22:42:49 +00:00
|
|
|
differs from
|
2007-05-11 23:07:02 +00:00
|
|
|
.BR fork (2)
|
2012-02-07 18:43:49 +00:00
|
|
|
in that the calling thread is suspended until the child terminates
|
2008-10-30 13:12:12 +00:00
|
|
|
(either normally,
|
|
|
|
by calling
|
2009-06-21 12:38:05 +00:00
|
|
|
.BR _exit (2),
|
2008-10-30 13:12:12 +00:00
|
|
|
or abnormally, after delivery of a fatal signal),
|
|
|
|
or it makes a call to
|
|
|
|
.BR execve (2).
|
|
|
|
Until that point, the child shares all memory with its parent,
|
|
|
|
including the stack.
|
2007-04-12 22:42:49 +00:00
|
|
|
The child must not return from the current function or call
|
2007-05-11 23:07:02 +00:00
|
|
|
.BR exit (3),
|
2004-11-03 13:51:07 +00:00
|
|
|
but may call
|
2007-05-11 23:07:02 +00:00
|
|
|
.BR _exit (2).
|
2012-02-07 21:00:41 +00:00
|
|
|
|
|
|
|
As with
|
|
|
|
.BR fork (2),
|
|
|
|
the child process created by
|
|
|
|
.BR vfork ()
|
|
|
|
inherits copies of various of the caller's process attributes
|
|
|
|
(e.g., file descriptors, signal dispositions, and current working directory);
|
|
|
|
the
|
|
|
|
.BR vfork ()
|
|
|
|
call differs only in the treatment of the virtual address space,
|
|
|
|
as described above.
|
|
|
|
|
|
|
|
Signals sent to the parent
|
2008-10-29 13:17:14 +00:00
|
|
|
arrive after the child releases the parent's memory
|
2008-10-30 13:12:12 +00:00
|
|
|
(i.e., after the child terminates
|
|
|
|
or calls
|
2008-10-29 13:17:14 +00:00
|
|
|
.BR execve (2)).
|
intro.1, time.1, _syscall.2, accept.2, capget.2, clone.2, execve.2, fcntl.2, intro.2, ioctl_list.2, ioprio_set.2, kill.2, mlock.2, nanosleep.2, perf_event_open.2, select.2, stat.2, times.2, ustat.2, vfork.2, wait.2, cfree.3, dbopen.3, dlopen.3, fenv.3, fmtmsg.3, gamma.3, getaddrinfo.3, gethostbyname.3, getnameinfo.3, getspnam.3, login.3, printf.3, regex.3, stdio.3, sysconf.3, termios.3, ttyslot.3, undocumented.3, wordexp.3, console_codes.4, initrd.4, mouse.4, random.4, st.4, tty_ioctl.4, wavelan.4, charmap.5, dir_colors.5, hosts.5, termcap.5, armscii-8.7, boot.7, bootparam.7, capabilities.7, charsets.7, ddp.7, futex.7, glob.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man.7, numa.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, rtnetlink.7, signal.7, time.7, udp.7, udplite.7, unicode.7, uri.7, utf-8.7: G;lobal fix: remove unneeded double quotes in .SS headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:02:18 +00:00
|
|
|
.SS Historic description
|
2004-11-03 13:51:07 +00:00
|
|
|
Under Linux,
|
2007-05-11 23:07:02 +00:00
|
|
|
.BR fork (2)
|
2004-11-03 13:51:07 +00:00
|
|
|
is implemented using copy-on-write pages, so the only penalty incurred by
|
2007-05-11 23:07:02 +00:00
|
|
|
.BR fork (2)
|
2004-11-03 13:51:07 +00:00
|
|
|
is the time and memory required to duplicate the parent's page tables,
|
|
|
|
and to create a unique task structure for the child.
|
|
|
|
However, in the bad old days a
|
2007-05-11 23:07:02 +00:00
|
|
|
.BR fork (2)
|
2004-11-03 13:51:07 +00:00
|
|
|
would require making a complete copy of the caller's data space,
|
Changes.old, clone.2, execve.2, fcntl.2, futex.2, getitimer.2, getpriority.2, mmap.2, mount.2, mprotect.2, sched_setscheduler.2, select_tut.2, setuid.2, sigaltstack.2, vfork.2, div.3, fenv.3, fmod.3, memchr.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_getattr_np.3, queue.3, scanf.3, trunc.3, st.4, proc.5, services.5, utmp.5, bootparam.7, capabilities.7, feature_test_macros.7, futex.7, glob.7, man.7, netlink.7, unicode.7: Switch to American usage: "-wards" ==> "-ward"
American English uses "afterward" in preference to "afterwards",
and so on
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-09-26 05:34:47 +00:00
|
|
|
often needlessly, since usually immediately afterward an
|
2007-05-21 21:07:25 +00:00
|
|
|
.BR exec (3)
|
2007-04-12 22:42:49 +00:00
|
|
|
is done.
|
|
|
|
Thus, for greater efficiency, BSD introduced the
|
2005-07-06 06:52:35 +00:00
|
|
|
.BR vfork ()
|
2008-10-29 13:34:38 +00:00
|
|
|
system call, which did not fully copy the address space of
|
2004-11-03 13:51:07 +00:00
|
|
|
the parent process, but borrowed the parent's memory and thread
|
|
|
|
of control until a call to
|
2007-05-11 23:07:02 +00:00
|
|
|
.BR execve (2)
|
2007-04-12 22:42:49 +00:00
|
|
|
or an exit occurred.
|
|
|
|
The parent process was suspended while the
|
2004-11-03 13:51:07 +00:00
|
|
|
child was using its resources.
|
2005-07-06 06:52:35 +00:00
|
|
|
The use of
|
|
|
|
.BR vfork ()
|
2005-07-06 06:54:27 +00:00
|
|
|
was tricky: for example, not modifying data
|
2010-06-15 01:33:53 +00:00
|
|
|
in the parent process depended on knowing which variables were
|
2004-11-03 13:51:07 +00:00
|
|
|
held in a register.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH CONFORMING TO
|
2012-02-07 22:53:49 +00:00
|
|
|
4.3BSD; POSIX.1-2001 (but marked OBSOLETE).
|
2008-08-06 10:46:26 +00:00
|
|
|
POSIX.1-2008 removes the specification of
|
|
|
|
.BR vfork ().
|
2012-02-07 22:50:05 +00:00
|
|
|
|
2006-08-03 13:57:17 +00:00
|
|
|
The requirements put on
|
2005-07-06 06:52:35 +00:00
|
|
|
.BR vfork ()
|
2004-11-03 13:51:07 +00:00
|
|
|
by the standards are weaker than those put on
|
2007-05-11 23:07:02 +00:00
|
|
|
.BR fork (2),
|
2007-04-12 22:42:49 +00:00
|
|
|
so an implementation where the two are synonymous is compliant.
|
2008-10-30 13:12:12 +00:00
|
|
|
In particular, the programmer cannot rely on the parent
|
|
|
|
remaining blocked until the child either terminates or calls
|
|
|
|
.BR execve (2),
|
2008-01-31 13:20:52 +00:00
|
|
|
and cannot rely on any specific behavior with respect to shared memory.
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" In AIXv3.1 vfork is equivalent to fork.
|
2007-05-18 10:39:45 +00:00
|
|
|
.SH NOTES
|
2012-02-07 21:37:00 +00:00
|
|
|
.PP
|
|
|
|
Some consider the semantics of
|
|
|
|
.BR vfork ()
|
|
|
|
to be an architectural blemish, and the 4.2BSD man page stated:
|
|
|
|
"This system call will be eliminated when proper system sharing mechanisms
|
|
|
|
are implemented.
|
|
|
|
Users should not depend on the memory sharing semantics of
|
|
|
|
.BR vfork ()
|
|
|
|
as it will, in that case, be made synonymous to
|
|
|
|
.BR fork (2).\c
|
|
|
|
"
|
2012-02-27 01:14:12 +00:00
|
|
|
However, even though modern memory management hardware
|
2012-02-07 21:37:00 +00:00
|
|
|
has decreased the performance difference between
|
2012-03-12 14:50:13 +00:00
|
|
|
.BR fork (2)
|
2012-02-07 21:37:00 +00:00
|
|
|
and
|
2012-03-12 14:50:13 +00:00
|
|
|
.BR vfork (),
|
2012-02-07 21:37:00 +00:00
|
|
|
there are various reasons why Linux and other systems have retained
|
|
|
|
.BR vfork ():
|
|
|
|
.IP * 3
|
|
|
|
Some performance-critical applications require the small performance
|
|
|
|
advantage conferred by
|
|
|
|
.BR vfork ().
|
|
|
|
.IP *
|
2012-03-12 14:50:13 +00:00
|
|
|
.BR vfork ()
|
2012-02-07 21:37:00 +00:00
|
|
|
can be implemented on systems that lack a memory-management unit (MMU), but
|
|
|
|
.BR fork (2)
|
|
|
|
can't be implemented on such systems.
|
|
|
|
(POSIX.1-2008 removed
|
|
|
|
.BR vfork ()
|
|
|
|
from the standard; the POSIX rationale for the
|
|
|
|
.BR posix_spawn (3)
|
|
|
|
function notes that that function,
|
|
|
|
which provides functionality equivalent to
|
|
|
|
.BR fork (2)+ exec (3),
|
|
|
|
is designed to be implementable on systems that lack an MMU.)
|
|
|
|
.\" http://stackoverflow.com/questions/4259629/what-is-the-difference-between-fork-and-vfork
|
|
|
|
.\" http://developers.sun.com/solaris/articles/subprocess/subprocess.html
|
|
|
|
.\" http://mailman.uclinux.org/pipermail/uclinux-dev/2009-April/000684.html
|
intro.1, time.1, _syscall.2, accept.2, brk.2, capget.2, faccessat.2, futimesat.2, gethostname.2, intro.2, ioprio_set.2, kill.2, madvise.2, mlock.2, mount.2, msgget.2, perf_event_open.2, poll.2, readv.2, sched_rr_get_interval.2, sched_setscheduler.2, select.2, select_tut.2, shmget.2, stat.2, timer_create.2, ustat.2, vfork.2, wait.2, alloca.3, atexit.3, catopen.3, crypt.3, dbopen.3, fenv.3, fopen.3, getaddrinfo_a.3, gethostbyname.3, getutent.3, intro.3, login.3, mallopt.3, queue.3, regex.3, sigpause.3, sigsetops.3, stdio.3, strftime.3, strptime.3, sysconf.3, ttyslot.3, undocumented.3, cciss.4, console_codes.4, hpsa.4, initrd.4, intro.4, rtc.4, st.4, tty_ioctl.4, wavelan.4, acct.5, charmap.5, dir_colors.5, hosts.5, intro.5, termcap.5, utmp.5, intro.6, armscii-8.7, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, ddp.7, epoll.7, glob.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man-pages.7, man.7, math_error.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, pthreads.7, raw.7, rtnetlink.7, signal.7, socket.7, spufs.7, svipc.7, tcp.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, intro.8: Global fix: use consistent capitalization in .SS headings
Capitalization in .SS sections across pages (and sometimes even
within a single page) is wildly inconsistent. Make it consistent.
Capitalize first word in heading, but otherwise use lower case,
except where English usage (e.g., proper nouns) or programming
language requirements (e.g., identifier names) dictate otherwise.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 14:08:38 +00:00
|
|
|
.SS Linux notes
|
2006-09-17 06:21:29 +00:00
|
|
|
Fork handlers established using
|
|
|
|
.BR pthread_atfork (3)
|
2007-04-12 22:42:49 +00:00
|
|
|
are not called when a multithreaded program employing
|
2006-09-17 06:21:29 +00:00
|
|
|
the NPTL threading library calls
|
|
|
|
.BR vfork ().
|
2007-04-12 22:42:49 +00:00
|
|
|
Fork handlers are called in this case in a program using the
|
2006-09-17 06:21:29 +00:00
|
|
|
LinuxThreads threading library.
|
|
|
|
(See
|
|
|
|
.BR pthreads (7)
|
|
|
|
for a description of Linux threading libraries.)
|
2012-02-07 21:03:58 +00:00
|
|
|
|
|
|
|
A call to
|
|
|
|
.BR vfork ()
|
|
|
|
is equivalent to calling
|
|
|
|
.BR clone (2)
|
|
|
|
with
|
|
|
|
.I flags
|
|
|
|
specified as:
|
|
|
|
|
|
|
|
CLONE_VM | CLONE_VFORK | SIGCHLD
|
2007-05-18 11:59:14 +00:00
|
|
|
.SS History
|
|
|
|
The
|
|
|
|
.BR vfork ()
|
|
|
|
system call appeared in 3.0BSD.
|
|
|
|
.\" In the release notes for 4.2BSD Sam Leffler wrote: `vfork: Is still
|
|
|
|
.\" present, but definitely on its way out'.
|
|
|
|
In 4.4BSD it was made synonymous to
|
|
|
|
.BR fork (2)
|
|
|
|
but NetBSD introduced it again,
|
capget.2, futex.2, sched_setscheduler.2, spu_create.2, spu_run.2, vfork.2, getnameinfo.3, netlink.3, cciss.4, console_codes.4, dsp56k.4, hpsa.4, sk98lin.4, filesystems.5, protocols.5, aio.7, capabilities.7, charsets.7, feature_test_macros.7, futex.7, hier.7, iso_8859-16.7, iso_8859-2.7, koi8-r.7, libc.7, man.7, netlink.7, numa.7, standards.7, unicode.7, units.7, uri.7, x25.7: Global fix: use UR macro where applicable
The syntax .UR http://example.com paired with .UE will create
links which one can interact, if the pager allows that. One
way to see the effect is ask the man(1) command to use browser
display, e.g.:
man -H man7/uri.7
("\:" is optional groff syntax to permit hyphenless line breaks.)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-08-13 08:02:36 +00:00
|
|
|
cf.
|
|
|
|
.UR http://www.netbsd.org\:/Documentation\:/kernel\:/vfork.html
|
|
|
|
.UE .
|
2007-05-18 11:59:14 +00:00
|
|
|
In Linux, it has been equivalent to
|
|
|
|
.BR fork (2)
|
|
|
|
until 2.2.0-pre6 or so.
|
|
|
|
Since 2.2.0-pre9 (on i386, somewhat later on
|
|
|
|
other architectures) it is an independent system call.
|
|
|
|
Support was added in glibc 2.0.112.
|
2007-05-18 16:30:46 +00:00
|
|
|
.SH BUGS
|
2012-02-07 21:37:00 +00:00
|
|
|
.PP
|
2007-05-18 16:30:46 +00:00
|
|
|
Details of the signal handling are obscure and differ between systems.
|
2007-05-21 12:58:17 +00:00
|
|
|
The BSD man page states:
|
2007-05-18 16:30:46 +00:00
|
|
|
"To avoid a possible deadlock situation, processes that are children
|
|
|
|
in the middle of a
|
|
|
|
.BR vfork ()
|
2007-06-21 05:38:48 +00:00
|
|
|
are never sent
|
|
|
|
.B SIGTTOU
|
|
|
|
or
|
|
|
|
.B SIGTTIN
|
|
|
|
signals; rather, output or
|
2007-05-18 16:30:46 +00:00
|
|
|
.IR ioctl s
|
|
|
|
are allowed and input attempts result in an end-of-file indication."
|
|
|
|
.\"
|
|
|
|
.\" As far as I can tell, the following is not true in 2.6.19:
|
|
|
|
.\" Currently (Linux 2.3.25),
|
|
|
|
.\" .BR strace (1)
|
|
|
|
.\" cannot follow
|
|
|
|
.\" .BR vfork ()
|
|
|
|
.\" and requires a kernel patch.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH SEE ALSO
|
2004-11-03 13:51:07 +00:00
|
|
|
.BR clone (2),
|
|
|
|
.BR execve (2),
|
|
|
|
.BR fork (2),
|
2006-03-20 21:29:29 +00:00
|
|
|
.BR unshare (2),
|
2004-11-03 13:51:07 +00:00
|
|
|
.BR wait (2)
|