2004-11-03 13:51:07 +00:00
|
|
|
.\" This manpage is Copyright (C) 1992 Drew Eckhardt;
|
_exit.2, access.2, alarm.2, close.2, link.2, mkdir.2, mknod.2, open.2, read.2, rename.2, rmdir.2, s390_runtime_instr.2, symlink.2, unlink.2, write.2, remove.3, charsets.7: srcfix: Tidy copyright notices
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-16 08:39:00 +00:00
|
|
|
.\" and Copyright (C) 1993 Michael Haardt;
|
2014-02-21 09:57:30 +00:00
|
|
|
.\" and Copyright (C) 1993,1995 Ian Jackson
|
|
|
|
.\" and Copyright (C) 2006, 2014 Michael Kerrisk
|
2004-11-03 13:51:07 +00:00
|
|
|
.\"
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:01 +00:00
|
|
|
.\" %%%LICENSE_START(VERBATIM)
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Permission is granted to make and distribute verbatim copies of this
|
|
|
|
.\" manual provided the copyright notice and this permission notice are
|
|
|
|
.\" preserved on all copies.
|
|
|
|
.\"
|
|
|
|
.\" Permission is granted to copy and distribute modified versions of this
|
|
|
|
.\" manual under the conditions for verbatim copying, provided that the
|
|
|
|
.\" entire resulting derived work is distributed under the terms of a
|
|
|
|
.\" permission notice identical to this one.
|
2007-04-12 22:42:49 +00:00
|
|
|
.\"
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Since the Linux kernel and libraries are constantly changing, this
|
|
|
|
.\" manual page may be incorrect or out-of-date. The author(s) assume no
|
|
|
|
.\" responsibility for errors or omissions, or for damages resulting from
|
|
|
|
.\" the use of the information contained herein. The author(s) may not
|
|
|
|
.\" have taken the same level of care in the production of this manual,
|
|
|
|
.\" which is licensed free of charge, as they might when working
|
|
|
|
.\" professionally.
|
2007-04-12 22:42:49 +00:00
|
|
|
.\"
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Formatted or processed versions of this manual, if unaccompanied by
|
|
|
|
.\" the source, must acknowledge the copyright and authors of this work.
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:40 +00:00
|
|
|
.\" %%%LICENSE_END
|
2004-11-03 13:51:07 +00:00
|
|
|
.\"
|
|
|
|
.\" Modified Sat Jul 24 00:35:52 1993 by Rik Faith <faith@cs.unc.edu>
|
|
|
|
.\" Modified Thu Jun 4 12:21:13 1998 by Andries Brouwer <aeb@cwi.nl>
|
2005-04-04 14:14:02 +00:00
|
|
|
.\" Modified Thu Mar 3 09:49:35 2005 by Michael Haardt <michael@moria.de>
|
2007-03-25 12:59:30 +00:00
|
|
|
.\" 2007-03-25, mtk, added various text to DESCRIPTION.
|
2004-11-03 13:51:07 +00:00
|
|
|
.\"
|
memusage.1, memusagestat.1, pldd.1, accept.2, adjtimex.2, arch_prctl.2, bdflush.2, bpf.2, close.2, epoll_ctl.2, epoll_wait.2, execve.2, execveat.2, fanotify_init.2, fanotify_mark.2, fcntl.2, fsync.2, get_kernel_syms.2, getdomainname.2, getgroups.2, gethostname.2, getrandom.2, getrlimit.2, getrusage.2, getsid.2, getunwind.2, io_getevents.2, ioctl_fat.2, kexec_load.2, killpg.2, listxattr.2, lseek.2, madvise.2, memfd_create.2, mknod.2, mlock.2, modify_ldt.2, msgctl.2, msgget.2, msgop.2, readlink.2, readv.2, reboot.2, recvmmsg.2, rename.2, request_key.2, restart_syscall.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, seccomp.2, select_tut.2, semctl.2, semget.2, semop.2, set_thread_area.2, seteuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigprocmask.2, stat.2, symlink.2, syscall.2, sysctl.2, unlink.2, bindresvport.3, byteorder.3, dlopen.3, endian.3, error.3, ffs.3, fmemopen.3, getcwd.3, getlogin.3, getnetent.3, getprotoent.3, getservent.3, getumask.3, getutent.3, glob.3, isalpha.3, lio_listio.3, login.3, mbsinit.3, mbstowcs.3, mbtowc.3, mkstemp.3, nextup.3, ntp_gettime.3, posix_fallocate.3, posix_spawn.3, pthread_join.3, pthread_rwlockattr_setkind_np.3, random.3, rcmd.3, realpath.3, resolver.3, setjmp.3, setnetgrent.3, sigvec.3, strerror.3, strverscmp.3, system.3, toupper.3, towlower.3, towupper.3, wcstombs.3, wordexp.3, cciss.4, loop.4, mouse.4, random.4, core.5, group.5, hosts.5, resolv.conf.5, ascii.7, environ.7, epoll.7, glob.7, ip.7, mq_overview.7, packet.7, pipe.7, raw.7, sched.7, signal.7, socket.7, symlink.7, ld.so.8, sln.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-10-08 10:53:47 +00:00
|
|
|
.TH RENAME 2 2016-10-08 "Linux" "Linux Programmer's Manual"
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH NAME
|
2014-04-19 08:32:49 +00:00
|
|
|
rename, renameat, renameat2 \- change the name or location of a file
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH SYNOPSIS
|
2014-02-21 09:57:30 +00:00
|
|
|
.nf
|
2004-11-03 13:51:07 +00:00
|
|
|
.B #include <stdio.h>
|
|
|
|
.sp
|
|
|
|
.BI "int rename(const char *" oldpath ", const char *" newpath );
|
2014-02-21 09:57:30 +00:00
|
|
|
.sp
|
|
|
|
.BR "#include <fcntl.h> " "/* Definition of AT_* constants */"
|
|
|
|
.B #include <stdio.h>
|
|
|
|
.sp
|
|
|
|
.BI "int renameat(int " olddirfd ", const char *" oldpath ,
|
|
|
|
.BI " int " newdirfd ", const char *" newpath );
|
2014-04-19 08:32:49 +00:00
|
|
|
|
|
|
|
.BI "int renameat2(int " olddirfd ", const char *" oldpath ,
|
2014-04-19 09:00:21 +00:00
|
|
|
.BI " int " newdirfd ", const char *" newpath \
|
|
|
|
", unsigned int " flags );
|
2014-02-21 09:57:30 +00:00
|
|
|
.fi
|
|
|
|
.sp
|
|
|
|
.in -4n
|
|
|
|
Feature Test Macro Requirements for glibc (see
|
|
|
|
.BR feature_test_macros (7)):
|
|
|
|
.in
|
|
|
|
.sp
|
|
|
|
.BR renameat ():
|
|
|
|
.PD 0
|
|
|
|
.ad l
|
|
|
|
.RS 4
|
|
|
|
.TP 4
|
|
|
|
Since glibc 2.10:
|
access.2, chmod.2, chown.2, link.2, mkdir.2, open.2, readlink.2, rename.2, stat.2, symlink.2, unlink.2, utimensat.2, vfork.2, dirfd.3, fexecve.3, ffs.3, fmemopen.3, getcwd.3, gethostbyname.3, getline.3, mbsnrtowcs.3, mkdtemp.3, mkfifo.3, opendir.3, printf.3, psignal.3, qecvt.3, scandir.3, stpcpy.3, stpncpy.3, strdup.3, strnlen.3, strsignal.3, ualarm.3, usleep.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3: Simply FTM requirements
Looking at <features.h> (or feature_test_macros(7)), one can
see that when _XOPEN_SOURCE is defined with the value 700
(or greater), then _POSIX_C_SOURCE is defined with the value
200809L (or greater). Therefore, terms in the man pages such as
_XOPEN_SOURCE\ >=\ 700 || _POSIX_C_SOURCE\ >=\ 200809L
can be simpified to:
_POSIX_C_SOURCE\ >=\ 200809L
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-02-08 11:46:05 +00:00
|
|
|
_POSIX_C_SOURCE\ >=\ 200809L
|
2014-02-21 09:57:30 +00:00
|
|
|
.TP
|
|
|
|
Before glibc 2.10:
|
|
|
|
_ATFILE_SOURCE
|
adjtimex.2, bind.2, cacheflush.2, clone.2, fallocate.2, fanotify_init.2, fanotify_mark.2, flock.2, futex.2, getdents.2, getpriority.2, getrlimit.2, gettid.2, gettimeofday.2, ioprio_set.2, kexec_load.2, migrate_pages.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, msgop.2, nfsservctl.2, perf_event_open.2, pread.2, ptrace.2, recvmmsg.2, rename.2, restart_syscall.2, sched_setattr.2, send.2, shmop.2, shutdown.2, sigaction.2, signalfd.2, syscalls.2, timer_create.2, timerfd_create.2, tkill.2, vmsplice.2, wait.2, aio_init.3, confstr.3, exit.3, fmemopen.3, fopen.3, getaddrinfo.3, getauxval.3, getspnam.3, isalpha.3, isatty.3, mallinfo.3, malloc.3, mallopt.3, psignal.3, pthread_attr_setinheritsched.3, qecvt.3, queue.3, rtnetlink.3, strerror.3, strftime.3, toupper.3, towlower.3, towupper.3, initrd.4, locale.5, proc.5, bootparam.7, capabilities.7, ddp.7, fanotify.7, icmp.7, inotify.7, ip.7, ipv6.7, netdevice.7, netlink.7, path_resolution.7, rtld-audit.7, rtnetlink.7, sched.7, signal.7, socket.7, svipc.7, tcp.7, unix.7, ld.so.8: srcfix: Update FIXMEs
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-21 21:47:44 +00:00
|
|
|
.\" FIXME . need to define FTMs for renameat2(), once it hits glibc
|
2014-02-21 09:57:30 +00:00
|
|
|
.RE
|
|
|
|
.ad
|
|
|
|
.PD
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH DESCRIPTION
|
2005-10-19 06:54:38 +00:00
|
|
|
.BR rename ()
|
2004-11-03 13:51:07 +00:00
|
|
|
renames a file, moving it between directories if required.
|
|
|
|
Any other hard links to the file (as created using
|
|
|
|
.BR link (2))
|
|
|
|
are unaffected.
|
2007-03-25 12:59:30 +00:00
|
|
|
Open file descriptors for
|
|
|
|
.I oldpath
|
|
|
|
are also unaffected.
|
2004-11-03 13:51:07 +00:00
|
|
|
|
2016-09-03 15:53:28 +00:00
|
|
|
Various restrictions determine whether or not the rename operation succeeds:
|
|
|
|
see ERRORS below.
|
|
|
|
|
2004-11-03 13:51:07 +00:00
|
|
|
If
|
|
|
|
.I newpath
|
2016-09-03 15:53:28 +00:00
|
|
|
already exists, it will be atomically replaced, so that there is
|
2004-11-03 13:51:07 +00:00
|
|
|
no point at which another process attempting to access
|
|
|
|
.I newpath
|
|
|
|
will find it missing.
|
2016-09-04 04:44:47 +00:00
|
|
|
However, there will probably be a window in which both
|
2016-09-03 16:10:09 +00:00
|
|
|
.I oldpath
|
|
|
|
and
|
|
|
|
.I newpath
|
|
|
|
refer to the file being renamed.
|
|
|
|
|
2007-03-25 12:59:30 +00:00
|
|
|
If
|
|
|
|
.I oldpath
|
|
|
|
and
|
|
|
|
.I newpath
|
|
|
|
are existing hard links referring to the same file, then
|
|
|
|
.BR rename ()
|
|
|
|
does nothing, and returns a success status.
|
|
|
|
|
2004-11-03 13:51:07 +00:00
|
|
|
If
|
|
|
|
.I newpath
|
2014-02-04 10:42:24 +00:00
|
|
|
exists but the operation fails for some reason,
|
2005-10-19 06:54:38 +00:00
|
|
|
.BR rename ()
|
2004-11-03 13:51:07 +00:00
|
|
|
guarantees to leave an instance of
|
|
|
|
.I newpath
|
|
|
|
in place.
|
|
|
|
|
2007-03-25 12:59:30 +00:00
|
|
|
.I oldpath
|
|
|
|
can specify a directory.
|
2007-04-12 22:42:49 +00:00
|
|
|
In this case,
|
2007-03-25 12:59:30 +00:00
|
|
|
.I newpath
|
|
|
|
must either not exist, or it must specify an empty directory.
|
|
|
|
|
2004-11-03 13:51:07 +00:00
|
|
|
If
|
|
|
|
.I oldpath
|
2014-02-04 10:42:24 +00:00
|
|
|
refers to a symbolic link, the link is renamed; if
|
2004-11-03 13:51:07 +00:00
|
|
|
.I newpath
|
2014-02-04 10:42:24 +00:00
|
|
|
refers to a symbolic link, the link will be overwritten.
|
2014-08-14 07:15:18 +00:00
|
|
|
.SS renameat()
|
2014-02-21 09:57:30 +00:00
|
|
|
The
|
|
|
|
.BR renameat ()
|
|
|
|
system call operates in exactly the same way as
|
access.2, chmod.2, chown.2, link.2, mkdir.2, open.2, readlink.2, rename.2, stat.2, symlink.2, unlink.2, mkfifo.3, scandir.3: Minor fix: remove section numbers in references to functions inside page
With the page merges, we now have some references to functions
within the page that have section numbers. Remove those.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-02-21 11:50:40 +00:00
|
|
|
.BR rename (),
|
2014-02-21 09:57:30 +00:00
|
|
|
except for the differences described here.
|
|
|
|
|
|
|
|
If the pathname given in
|
|
|
|
.I oldpath
|
|
|
|
is relative, then it is interpreted relative to the directory
|
|
|
|
referred to by the file descriptor
|
|
|
|
.I olddirfd
|
|
|
|
(rather than relative to the current working directory of
|
|
|
|
the calling process, as is done by
|
access.2, chmod.2, chown.2, link.2, mkdir.2, open.2, readlink.2, rename.2, stat.2, symlink.2, unlink.2, mkfifo.3, scandir.3: Minor fix: remove section numbers in references to functions inside page
With the page merges, we now have some references to functions
within the page that have section numbers. Remove those.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-02-21 11:50:40 +00:00
|
|
|
.BR rename ()
|
2014-02-21 09:57:30 +00:00
|
|
|
for a relative pathname).
|
|
|
|
|
|
|
|
If
|
|
|
|
.I oldpath
|
|
|
|
is relative and
|
|
|
|
.I olddirfd
|
|
|
|
is the special value
|
|
|
|
.BR AT_FDCWD ,
|
|
|
|
then
|
|
|
|
.I oldpath
|
|
|
|
is interpreted relative to the current working
|
|
|
|
directory of the calling process (like
|
access.2, chmod.2, chown.2, link.2, mkdir.2, open.2, readlink.2, rename.2, stat.2, symlink.2, unlink.2, mkfifo.3, scandir.3: Minor fix: remove section numbers in references to functions inside page
With the page merges, we now have some references to functions
within the page that have section numbers. Remove those.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-02-21 11:50:40 +00:00
|
|
|
.BR rename ()).
|
2014-02-21 09:57:30 +00:00
|
|
|
|
|
|
|
If
|
|
|
|
.I oldpath
|
|
|
|
is absolute, then
|
|
|
|
.I olddirfd
|
|
|
|
is ignored.
|
|
|
|
|
|
|
|
The interpretation of
|
|
|
|
.I newpath
|
|
|
|
is as for
|
|
|
|
.IR oldpath ,
|
|
|
|
except that a relative pathname is interpreted relative
|
|
|
|
to the directory referred to by the file descriptor
|
|
|
|
.IR newdirfd .
|
|
|
|
|
|
|
|
See
|
|
|
|
.BR openat (2)
|
|
|
|
for an explanation of the need for
|
|
|
|
.BR renameat ().
|
2014-04-19 08:32:49 +00:00
|
|
|
.SS renameat2()
|
|
|
|
.BR renameat2 ()
|
|
|
|
has an additional
|
|
|
|
.I flags
|
|
|
|
argument.
|
|
|
|
A
|
|
|
|
.BR renameat2 ()
|
|
|
|
call with a zero
|
|
|
|
.I flags
|
|
|
|
argument is equivalent to
|
|
|
|
.BR renameat ().
|
|
|
|
|
|
|
|
The
|
|
|
|
.I flags
|
|
|
|
argument is a bit mask consisting of zero or more of the following flags:
|
|
|
|
.TP
|
|
|
|
.B RENAME_EXCHANGE
|
|
|
|
Atomically exchange
|
|
|
|
.IR oldpath
|
|
|
|
and
|
|
|
|
.IR newpath .
|
|
|
|
Both pathnames must exist
|
|
|
|
but may be of different types (e.g., one could be a non-empty directory
|
|
|
|
and the other a symbolic link).
|
2015-05-06 13:26:57 +00:00
|
|
|
.TP
|
|
|
|
.B RENAME_NOREPLACE
|
|
|
|
Don't overwrite
|
|
|
|
.IR newpath
|
|
|
|
of the rename.
|
|
|
|
Return an error if
|
|
|
|
.IR newpath
|
|
|
|
already exists.
|
2015-05-06 14:12:01 +00:00
|
|
|
|
|
|
|
.B RENAME_NOREPLACE
|
|
|
|
can't be employed together with
|
|
|
|
.BR RENAME_EXCHANGE .
|
2015-05-06 14:09:57 +00:00
|
|
|
.TP
|
|
|
|
.BR RENAME_WHITEOUT " (since Linux 3.18)"
|
|
|
|
.\" commit 0d7a855526dd672e114aff2ac22b60fc6f155b08
|
2015-05-07 11:49:05 +00:00
|
|
|
.\" commit 787fb6bc9682ec7c05fb5d9561b57100fbc1cc41
|
2015-05-06 14:09:57 +00:00
|
|
|
This operation makes sense only for overlay/union
|
|
|
|
filesystem implementations.
|
|
|
|
|
|
|
|
Specifying
|
|
|
|
.B RENAME_WHITEOUT
|
|
|
|
creates a "whiteout" object at the source of
|
|
|
|
the rename at the same time as performing the rename.
|
|
|
|
The whole operation is atomic,
|
|
|
|
so that if the rename succeeds then the whiteout will also have been created.
|
|
|
|
|
|
|
|
A "whiteout" is an object that has special meaning in union/overlay
|
|
|
|
filesystem constructs.
|
|
|
|
In these constructs,
|
|
|
|
multiple layers exist and only the top one is ever modified.
|
|
|
|
A whiteout on an upper layer will effectively hide a
|
|
|
|
matching file in the lower layer,
|
|
|
|
making it appear as if the file didn't exist.
|
|
|
|
|
|
|
|
When a file that exists on the lower layer is renamed,
|
|
|
|
the file is first copied up (if not already on the upper layer)
|
2015-07-23 14:15:22 +00:00
|
|
|
and then renamed on the upper, read-write layer.
|
2015-05-06 14:09:57 +00:00
|
|
|
At the same time, the source file needs to be "whiteouted"
|
|
|
|
(so that the version of the source file in the lower layer
|
|
|
|
is rendered invisible).
|
|
|
|
The whole operation needs to be done atomically.
|
|
|
|
|
|
|
|
When not part of a union/overlay,
|
|
|
|
the whiteout appears as a character device with a {0,0} device number.
|
|
|
|
|
|
|
|
.B RENAME_WHITEOUT
|
|
|
|
requires the same privileges as creating a device node (i.e., the
|
|
|
|
.BR CAP_MKNOD
|
|
|
|
capability).
|
|
|
|
|
|
|
|
.B RENAME_WHITEOUT
|
|
|
|
can't be employed together with
|
|
|
|
.BR RENAME_EXCHANGE .
|
|
|
|
|
|
|
|
.B RENAME_WHITEOUT
|
|
|
|
requires support from the underlying filesystem.
|
|
|
|
Among the filesystems that provide that support are
|
|
|
|
shmem (since Linux 3.18),
|
|
|
|
.\" shmem: commit 46fdb794e3f52ef18b859ebc92f0a9d7db21c5df
|
|
|
|
ext4 (since Linux 3.18),
|
|
|
|
.\" ext4: commit cd808deced431b66b5fa4e5c193cb7ec0059eaff
|
|
|
|
and XFS (since Linux 4.1).
|
|
|
|
.\" XFS: commit 7dcf5c3e4527cfa2807567b00387cf2ed5e07f00
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH RETURN VALUE
|
2007-04-12 22:42:49 +00:00
|
|
|
On success, zero is returned.
|
|
|
|
On error, \-1 is returned, and
|
2004-11-03 13:51:07 +00:00
|
|
|
.I errno
|
|
|
|
is set appropriately.
|
|
|
|
.SH ERRORS
|
|
|
|
.TP
|
|
|
|
.B EACCES
|
|
|
|
Write permission is denied for the directory containing
|
|
|
|
.I oldpath
|
|
|
|
or
|
|
|
|
.IR newpath ,
|
|
|
|
or, search permission is denied for one of the directories
|
|
|
|
in the path prefix of
|
|
|
|
.I oldpath
|
|
|
|
or
|
|
|
|
.IR newpath ,
|
|
|
|
or
|
|
|
|
.I oldpath
|
|
|
|
is a directory and does not allow write permission (needed to update
|
|
|
|
the
|
2005-11-02 11:55:24 +00:00
|
|
|
.I ..
|
2004-11-03 13:51:07 +00:00
|
|
|
entry).
|
|
|
|
(See also
|
2007-05-26 12:41:39 +00:00
|
|
|
.BR path_resolution (7).)
|
2004-11-03 13:51:07 +00:00
|
|
|
.TP
|
|
|
|
.B EBUSY
|
|
|
|
The rename fails because
|
|
|
|
.IR oldpath " or " newpath
|
|
|
|
is a directory that is in use by some process (perhaps as
|
|
|
|
current working directory, or as root directory, or because
|
|
|
|
it was open for reading) or is in use by the system
|
|
|
|
(for example as mount point), while the system considers
|
|
|
|
this an error.
|
2007-06-22 17:16:20 +00:00
|
|
|
(Note that there is no requirement to return
|
2007-09-20 16:26:31 +00:00
|
|
|
.B EBUSY
|
2007-06-22 17:16:20 +00:00
|
|
|
in such
|
intro.1, fork.2, futex.2, open.2, rename.2, select_tut.2, semop.2, spu_create.2, stat.2, netlink.3, random.3, scanf.3, shm_open.3, strftime.3, console.4, console_codes.4, sk98lin.4, st.4, bootparam.7, cpuset.7, credentials.7, man-pages.7, path_resolution.7, uri.7: Global fix: remove spaces around em-dash
Normal English typographical convention is not to have
spaces around em dashes.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2011-10-03 06:47:35 +00:00
|
|
|
cases\(emthere is nothing wrong with doing the rename anyway\(embut
|
|
|
|
it is allowed to return
|
2007-06-22 17:16:20 +00:00
|
|
|
.B EBUSY
|
|
|
|
if the system cannot otherwise
|
2004-11-03 13:51:07 +00:00
|
|
|
handle such situations.)
|
|
|
|
.TP
|
link.2, mkdir.2, mknod.2, open.2, rename.2, symlink.2, write.2, mkfifo.3: Document EDQUOT error
The return error EDQUOT is not documented in open(2), write(2),
symlink(2) etc..
Whether inodes or disk blocks are required for each function
is something I based on received wisdom and BSD documentation,
rather than tracing the code to the kernel. For symlink(2)
this certainly depends on the file system type.
This patch was previously sent to the linux-man mailing list
as an RFC in September 2010.
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-12-22 17:56:59 +00:00
|
|
|
.B EDQUOT
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
The user's quota of disk blocks on the filesystem has been exhausted.
|
link.2, mkdir.2, mknod.2, open.2, rename.2, symlink.2, write.2, mkfifo.3: Document EDQUOT error
The return error EDQUOT is not documented in open(2), write(2),
symlink(2) etc..
Whether inodes or disk blocks are required for each function
is something I based on received wisdom and BSD documentation,
rather than tracing the code to the kernel. For symlink(2)
this certainly depends on the file system type.
This patch was previously sent to the linux-man mailing list
as an RFC in September 2010.
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-12-22 17:56:59 +00:00
|
|
|
.TP
|
2004-11-03 13:51:07 +00:00
|
|
|
.B EFAULT
|
|
|
|
.IR oldpath " or " newpath " points outside your accessible address space."
|
|
|
|
.TP
|
|
|
|
.B EINVAL
|
|
|
|
The new pathname contained a path prefix of the old, or, more generally,
|
|
|
|
an attempt was made to make a directory a subdirectory of itself.
|
|
|
|
.TP
|
|
|
|
.B EISDIR
|
|
|
|
.I newpath
|
|
|
|
is an existing directory, but
|
|
|
|
.I oldpath
|
|
|
|
is not a directory.
|
|
|
|
.TP
|
|
|
|
.B ELOOP
|
|
|
|
Too many symbolic links were encountered in resolving
|
|
|
|
.IR oldpath " or " newpath .
|
|
|
|
.TP
|
|
|
|
.B EMLINK
|
|
|
|
.I oldpath
|
|
|
|
already has the maximum number of links to it, or
|
|
|
|
it was a directory and the directory containing
|
|
|
|
.I newpath
|
|
|
|
has the maximum number of links.
|
|
|
|
.TP
|
|
|
|
.B ENAMETOOLONG
|
|
|
|
.IR oldpath " or " newpath " was too long."
|
|
|
|
.TP
|
|
|
|
.B ENOENT
|
2009-03-30 02:19:48 +00:00
|
|
|
The link named by
|
|
|
|
.I oldpath
|
|
|
|
does not exist;
|
|
|
|
or, a directory component in
|
|
|
|
.I newpath
|
|
|
|
does not exist;
|
|
|
|
or,
|
|
|
|
.I oldpath
|
|
|
|
or
|
|
|
|
.I newpath
|
|
|
|
is an empty string.
|
2004-11-03 13:51:07 +00:00
|
|
|
.TP
|
|
|
|
.B ENOMEM
|
|
|
|
Insufficient kernel memory was available.
|
|
|
|
.TP
|
|
|
|
.B ENOSPC
|
|
|
|
The device containing the file has no room for the new directory
|
|
|
|
entry.
|
|
|
|
.TP
|
|
|
|
.B ENOTDIR
|
|
|
|
A component used as a directory in
|
|
|
|
.IR oldpath " or " newpath
|
|
|
|
is not, in fact, a directory.
|
|
|
|
Or,
|
|
|
|
.I oldpath
|
|
|
|
is a directory, and
|
|
|
|
.I newpath
|
|
|
|
exists but is not a directory.
|
|
|
|
.TP
|
|
|
|
.BR ENOTEMPTY " or " EEXIST
|
2007-09-20 16:26:31 +00:00
|
|
|
.I newpath
|
mbind.2, rename.2, sched_setscheduler.2, set_mempolicy.2, syslog.2, argz_add.3, dlopen.3, scanf.3, strtod.3, strtok.3, tcgetpgrp.3, hd.4, cpuset.7, regex.7, ld.so.8: Global fix: s/non-empty/nonempty/
The tendency in English, as prescribed in style guides like
Chicago MoS, is towards removing hyphens after prefixes
like "non-" etc.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-01-16 16:41:47 +00:00
|
|
|
is a nonempty directory, that is, contains entries other than "." and "..".
|
2004-11-03 13:51:07 +00:00
|
|
|
.TP
|
|
|
|
.BR EPERM " or " EACCES
|
|
|
|
The directory containing
|
|
|
|
.I oldpath
|
|
|
|
has the sticky bit
|
|
|
|
.RB ( S_ISVTX )
|
|
|
|
set and the process's effective user ID is neither
|
|
|
|
the user ID of the file to be deleted nor that of the directory
|
|
|
|
containing it, and the process is not privileged
|
|
|
|
(Linux: does not have the
|
|
|
|
.B CAP_FOWNER
|
|
|
|
capability);
|
|
|
|
or
|
|
|
|
.I newpath
|
|
|
|
is an existing file and the directory containing it has the sticky bit set
|
|
|
|
and the process's effective user ID is neither the user ID of the file
|
|
|
|
to be replaced nor that of the directory containing it,
|
|
|
|
and the process is not privileged
|
|
|
|
(Linux: does not have the
|
|
|
|
.B CAP_FOWNER
|
|
|
|
capability);
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
or the filesystem containing
|
2007-09-20 16:26:31 +00:00
|
|
|
.I pathname
|
2004-11-03 13:51:07 +00:00
|
|
|
does not support renaming of the type requested.
|
|
|
|
.TP
|
|
|
|
.B EROFS
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
The file is on a read-only filesystem.
|
2004-11-03 13:51:07 +00:00
|
|
|
.TP
|
|
|
|
.B EXDEV
|
|
|
|
.IR oldpath " and " newpath
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
are not on the same mounted filesystem.
|
|
|
|
(Linux permits a filesystem to be mounted at multiple points, but
|
2007-11-24 10:10:39 +00:00
|
|
|
.BR rename ()
|
2005-04-04 14:14:02 +00:00
|
|
|
does not work across different mount points,
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
even if the same filesystem is mounted on both.)
|
2014-02-21 09:57:30 +00:00
|
|
|
.PP
|
|
|
|
The following additional errors can occur for
|
2014-04-19 08:32:49 +00:00
|
|
|
.BR renameat ()
|
|
|
|
and
|
|
|
|
.BR renameat2 ():
|
2014-02-21 09:57:30 +00:00
|
|
|
.TP
|
|
|
|
.B EBADF
|
|
|
|
.I olddirfd
|
|
|
|
or
|
|
|
|
.I newdirfd
|
|
|
|
is not a valid file descriptor.
|
|
|
|
.TP
|
|
|
|
.B ENOTDIR
|
|
|
|
.I oldpath
|
|
|
|
is relative and
|
|
|
|
.I olddirfd
|
|
|
|
is a file descriptor referring to a file other than a directory;
|
|
|
|
or similar for
|
|
|
|
.I newpath
|
|
|
|
and
|
|
|
|
.I newdirfd
|
2014-04-19 08:32:49 +00:00
|
|
|
.PP
|
|
|
|
The following additional errors can occur for
|
|
|
|
.BR renameat2 ():
|
|
|
|
.TP
|
|
|
|
.B EEXIST
|
|
|
|
.I flags
|
|
|
|
contains
|
|
|
|
.B RENAME_NOREPLACE
|
|
|
|
and
|
|
|
|
.I newpath
|
|
|
|
already exists.
|
2014-05-08 09:04:30 +00:00
|
|
|
.TP
|
2014-04-19 08:32:49 +00:00
|
|
|
.B EINVAL
|
2014-04-19 08:57:02 +00:00
|
|
|
An invalid flag was specified in
|
2015-05-06 13:51:42 +00:00
|
|
|
.IR flags .
|
|
|
|
.TP
|
|
|
|
.B EINVAL
|
|
|
|
Both
|
2014-04-19 08:57:02 +00:00
|
|
|
.B RENAME_NOREPLACE
|
|
|
|
and
|
|
|
|
.B RENAME_EXCHANGE
|
2015-05-06 13:51:42 +00:00
|
|
|
were specified in
|
|
|
|
.IR flags .
|
2014-04-19 08:32:49 +00:00
|
|
|
.TP
|
|
|
|
.B EINVAL
|
2015-05-06 14:09:57 +00:00
|
|
|
Both
|
|
|
|
.B RENAME_WHITEOUT
|
|
|
|
and
|
|
|
|
.B RENAME_EXCHANGE
|
|
|
|
were specified in
|
|
|
|
.IR flags .
|
|
|
|
.TP
|
|
|
|
.B EINVAL
|
2014-04-19 08:32:49 +00:00
|
|
|
The filesystem does not support one of the flags in
|
|
|
|
.IR flags .
|
|
|
|
.TP
|
|
|
|
.B ENOENT
|
|
|
|
.I flags
|
2014-04-19 08:59:19 +00:00
|
|
|
contains
|
2014-04-19 08:32:49 +00:00
|
|
|
.B RENAME_EXCHANGE
|
2014-04-19 08:59:19 +00:00
|
|
|
and
|
|
|
|
.IR newpath
|
|
|
|
does not exist.
|
2015-05-06 14:09:57 +00:00
|
|
|
.TP
|
|
|
|
.B EPERM
|
|
|
|
.B RENAME_WHITEOUT
|
|
|
|
was specified in
|
|
|
|
.IR flags ,
|
|
|
|
but the caller does not have the
|
|
|
|
.B CAP_MKNOD
|
|
|
|
capability.
|
2014-02-21 09:57:30 +00:00
|
|
|
.SH VERSIONS
|
|
|
|
.BR renameat ()
|
|
|
|
was added to Linux in kernel 2.6.16;
|
|
|
|
library support was added to glibc in version 2.4.
|
2014-04-19 08:35:45 +00:00
|
|
|
|
|
|
|
.BR renameat2 ()
|
|
|
|
was added to Linux in kernel 3.15.
|
adjtimex.2, bind.2, cacheflush.2, clone.2, fallocate.2, fanotify_init.2, fanotify_mark.2, flock.2, futex.2, getdents.2, getpriority.2, getrlimit.2, gettid.2, gettimeofday.2, ioprio_set.2, kexec_load.2, migrate_pages.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, msgop.2, nfsservctl.2, perf_event_open.2, pread.2, ptrace.2, recvmmsg.2, rename.2, restart_syscall.2, sched_setattr.2, send.2, shmop.2, shutdown.2, sigaction.2, signalfd.2, syscalls.2, timer_create.2, timerfd_create.2, tkill.2, vmsplice.2, wait.2, aio_init.3, confstr.3, exit.3, fmemopen.3, fopen.3, getaddrinfo.3, getauxval.3, getspnam.3, isalpha.3, isatty.3, mallinfo.3, malloc.3, mallopt.3, psignal.3, pthread_attr_setinheritsched.3, qecvt.3, queue.3, rtnetlink.3, strerror.3, strftime.3, toupper.3, towlower.3, towupper.3, initrd.4, locale.5, proc.5, bootparam.7, capabilities.7, ddp.7, fanotify.7, icmp.7, inotify.7, ip.7, ipv6.7, netdevice.7, netlink.7, path_resolution.7, rtld-audit.7, rtnetlink.7, sched.7, signal.7, socket.7, svipc.7, tcp.7, unix.7, ld.so.8: srcfix: Update FIXMEs
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-21 21:47:44 +00:00
|
|
|
.\" FIXME . glibc support is pending.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH CONFORMING TO
|
2014-02-21 09:57:30 +00:00
|
|
|
.BR rename ():
|
2014-02-21 09:58:04 +00:00
|
|
|
4.3BSD, C89, C99, POSIX.1-2001, POSIX.1-2008.
|
2014-02-21 09:57:30 +00:00
|
|
|
|
|
|
|
.BR renameat ():
|
|
|
|
POSIX.1-2008.
|
2014-04-19 08:35:45 +00:00
|
|
|
|
2014-08-14 07:15:18 +00:00
|
|
|
.BR renameat2 ()
|
2014-04-19 08:35:45 +00:00
|
|
|
is Linux-specific.
|
2014-05-16 08:07:37 +00:00
|
|
|
.SH NOTES
|
|
|
|
.SS Glibc notes
|
|
|
|
On older kernels where
|
|
|
|
.BR renameat ()
|
|
|
|
is unavailable, the glibc wrapper function falls back to the use of
|
|
|
|
.BR rename ().
|
|
|
|
When
|
|
|
|
.I oldpath
|
|
|
|
and
|
|
|
|
.I newpath
|
|
|
|
are relative pathnames,
|
|
|
|
glibc constructs pathnames based on the symbolic links in
|
|
|
|
.IR /proc/self/fd
|
|
|
|
that correspond to the
|
|
|
|
.I olddirfd
|
|
|
|
and
|
|
|
|
.IR newdirfd
|
|
|
|
arguments.
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH BUGS
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
On NFS filesystems, you can not assume that if the operation
|
2014-02-04 10:42:24 +00:00
|
|
|
failed, the file was not renamed.
|
2007-04-12 22:42:49 +00:00
|
|
|
If the server does the rename operation
|
2004-11-03 13:51:07 +00:00
|
|
|
and then crashes, the retransmitted RPC which will be processed when the
|
2007-04-12 22:42:49 +00:00
|
|
|
server is up again causes a failure.
|
|
|
|
The application is expected to
|
|
|
|
deal with this.
|
|
|
|
See
|
2004-11-03 13:51:07 +00:00
|
|
|
.BR link (2)
|
|
|
|
for a similar problem.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH SEE ALSO
|
2004-11-03 13:51:07 +00:00
|
|
|
.BR mv (1),
|
|
|
|
.BR chmod (2),
|
|
|
|
.BR link (2),
|
|
|
|
.BR symlink (2),
|
2007-05-26 12:41:39 +00:00
|
|
|
.BR unlink (2),
|
2008-06-11 21:50:53 +00:00
|
|
|
.BR path_resolution (7),
|
2008-06-11 22:19:03 +00:00
|
|
|
.BR symlink (7)
|