2012-11-07 12:02:54 +00:00
|
|
|
.\" Copyright 2012 Michael Kerrisk <mtk.manpages@gmail.com>
|
|
|
|
.\"
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:01 +00:00
|
|
|
.\" %%%LICENSE_START(VERBATIM)
|
2012-11-07 12:02:54 +00:00
|
|
|
.\" Permission is granted to make and distribute verbatim copies of this
|
|
|
|
.\" manual provided the copyright notice and this permission notice are
|
|
|
|
.\" preserved on all copies.
|
|
|
|
.\"
|
|
|
|
.\" Permission is granted to copy and distribute modified versions of this
|
|
|
|
.\" manual under the conditions for verbatim copying, provided that the
|
|
|
|
.\" entire resulting derived work is distributed under the terms of a
|
|
|
|
.\" permission notice identical to this one.
|
|
|
|
.\"
|
|
|
|
.\" Since the Linux kernel and libraries are constantly changing, this
|
|
|
|
.\" manual page may be incorrect or out-of-date. The author(s) assume no
|
|
|
|
.\" responsibility for errors or omissions, or for damages resulting from
|
|
|
|
.\" the use of the information contained herein. The author(s) may not
|
|
|
|
.\" have taken the same level of care in the production of this manual,
|
|
|
|
.\" which is licensed free of charge, as they might when working
|
|
|
|
.\" professionally.
|
|
|
|
.\"
|
|
|
|
.\" Formatted or processed versions of this manual, if unaccompanied by
|
|
|
|
.\" the source, must acknowledge the copyright and authors of this work.
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:40 +00:00
|
|
|
.\" %%%LICENSE_END
|
2012-11-07 12:02:54 +00:00
|
|
|
.\"
|
|
|
|
.\" See also https://lwn.net/Articles/519085/
|
|
|
|
.\"
|
iconv.1, ldd.1, accept.2, access.2, add_key.2, arch_prctl.2, bpf.2, chmod.2, chown.2, close_range.2, copy_file_range.2, execve.2, execveat.2, fanotify_mark.2, futex.2, futimesat.2, getpriority.2, intro.2, ioctl_tty.2, keyctl.2, link.2, membarrier.2, mkdir.2, mknod.2, mlock.2, mount.2, mount_setattr.2, open.2, open_by_handle_at.2, perf_event_open.2, pidfd_open.2, readlink.2, readv.2, rename.2, request_key.2, seccomp.2, sigaction.2, stat.2, statx.2, symlink.2, syscalls.2, umount.2, unlink.2, utimensat.2, wait.2, bsearch.3, fflush.3, getaddrinfo.3, getauxval.3, getopt.3, getsubopt.3, mkfifo.3, pthread_mutex_consistent.3, pthread_setname_np.3, pthread_tryjoin_np.3, scandir.3, sem_wait.3, stailq.3, strlen.3, strstr.3, termios.3, tsearch.3, wcslen.3, wcstok.3, wordexp.3, proc.5, capabilities.7, cgroups.7, fanotify.7, mount_namespaces.7, namespaces.7, path_resolution.7, pipe.7, posixoptions.7, user_namespaces.7, vdso.7, iconvconfig.8, ld.so.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-08-27 00:44:07 +00:00
|
|
|
.TH GETAUXVAL 3 2021-08-27 "GNU" "Linux Programmer's Manual"
|
2012-11-07 12:02:54 +00:00
|
|
|
.SH NAME
|
|
|
|
getauxval \- retrieve a value from the auxiliary vector
|
|
|
|
.SH SYNOPSIS
|
|
|
|
.nf
|
|
|
|
.B #include <sys/auxv.h>
|
_exit.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, create_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, exit_group.2, fanotify_mark.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, ioctl.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_tty.2, ioperm.2, iopl.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_mempolicy.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shutdown.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, sync.2, sysctl.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, difftime.3, dirfd.3, div.3, dlerror.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, erf.3, erfc.3, err.3, errno.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, infnan.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, newlocale.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, y0.3, dsp56k.4, random.4, rtc.4, st.4, ddp.7, ip.7, ipv6.7, packet.7, rtnetlink.7, socket.7, tcp.7, udp.7, udplite.7, x25.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 15:16:29 +00:00
|
|
|
.PP
|
2012-11-07 12:02:54 +00:00
|
|
|
.BI "unsigned long getauxval(unsigned long " type );
|
|
|
|
.fi
|
|
|
|
.SH DESCRIPTION
|
|
|
|
The
|
|
|
|
.BR getauxval ()
|
|
|
|
function retrieves values from the auxiliary vector,
|
|
|
|
a mechanism that the kernel's ELF binary loader
|
|
|
|
uses to pass certain information to
|
|
|
|
user space when a program is executed.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2012-11-07 12:02:54 +00:00
|
|
|
Each entry in the auxiliary vector consists of a pair of values:
|
|
|
|
a type that identifies what this entry represents,
|
|
|
|
and a value for that type.
|
|
|
|
Given the argument
|
|
|
|
.IR type ,
|
|
|
|
.BR getauxval ()
|
|
|
|
returns the corresponding value.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2012-11-07 12:02:54 +00:00
|
|
|
The value returned for each
|
|
|
|
.I type
|
|
|
|
is given in the following list.
|
|
|
|
Not all
|
|
|
|
.I type
|
|
|
|
values are present on all architectures.
|
|
|
|
.TP
|
|
|
|
.BR AT_BASE
|
|
|
|
The base address of the program interpreter (usually, the dynamic linker).
|
|
|
|
.TP
|
|
|
|
.BR AT_BASE_PLATFORM
|
getauxval.3: MIPS, AT_BASE_PLATFORM passes ISA level
Since Linux 5.7, on MIPS, we use AT_BASE_PLATFORM to pass ISA level.
The values may be:
mips2, mips3, mips4, mips5,
mips32, mips32r2, mips32r6,
mips64, mips64r2, mips64r6.
This behavior is different with PowerPC.
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=e585b768da111f2c2d413de6214e83bbdfee8f22
Signed-off-by: YunQiang Su <syq@debian.org>
----
v1 -> v2: fix typo
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-03-22 09:55:27 +00:00
|
|
|
A pointer to a string (PowerPC and MIPS only).
|
|
|
|
On PowerPC, this identifies the real platform; may differ from
|
|
|
|
.BR AT_PLATFORM "."
|
2020-04-16 11:13:12 +00:00
|
|
|
On MIPS,
|
|
|
|
.\" commit e585b768da111f2c2d413de6214e83bbdfee8f22
|
|
|
|
this identifies the ISA level (since Linux 5.7).
|
2012-11-07 12:02:54 +00:00
|
|
|
.TP
|
|
|
|
.BR AT_CLKTCK
|
|
|
|
The frequency with which
|
|
|
|
.BR times (2)
|
|
|
|
counts.
|
|
|
|
This value can also be obtained via
|
|
|
|
.IR sysconf(_SC_CLK_TCK) .
|
|
|
|
.TP
|
|
|
|
.BR AT_DCACHEBSIZE
|
|
|
|
The data cache block size.
|
|
|
|
.TP
|
|
|
|
.BR AT_EGID
|
|
|
|
The effective group ID of the thread.
|
|
|
|
.TP
|
|
|
|
.BR AT_ENTRY
|
|
|
|
The entry address of the executable.
|
|
|
|
.TP
|
|
|
|
.BR AT_EUID
|
|
|
|
The effective user ID of the thread.
|
|
|
|
.TP
|
|
|
|
.BR AT_EXECFD
|
|
|
|
File descriptor of program.
|
|
|
|
.TP
|
|
|
|
.BR AT_EXECFN
|
2019-10-12 12:23:15 +00:00
|
|
|
A pointer to a string containing the pathname used to execute the program.
|
2012-11-07 12:02:54 +00:00
|
|
|
.TP
|
|
|
|
.BR AT_FLAGS
|
|
|
|
Flags (unused).
|
|
|
|
.TP
|
|
|
|
.BR AT_FPUCW
|
2012-11-07 13:24:27 +00:00
|
|
|
Used FPU control word (SuperH architecture only).
|
2012-11-07 12:02:54 +00:00
|
|
|
This gives some information about the FPU initialization
|
|
|
|
performed by the kernel.
|
|
|
|
.TP
|
|
|
|
.BR AT_GID
|
|
|
|
The real group ID of the thread.
|
|
|
|
.TP
|
|
|
|
.BR AT_HWCAP
|
2016-07-14 06:43:01 +00:00
|
|
|
An architecture and ABI dependent bit-mask whose settings
|
2012-11-07 12:02:54 +00:00
|
|
|
indicate detailed processor capabilities.
|
|
|
|
The contents of the bit mask are hardware dependent
|
|
|
|
(for example, see the kernel source file
|
|
|
|
.IR arch/x86/include/asm/cpufeature.h
|
2016-07-12 16:35:43 +00:00
|
|
|
for details relating to the Intel x86 architecture; the value
|
2016-07-12 20:24:22 +00:00
|
|
|
returned is the first 32-bit word of the array described there).
|
2012-11-07 12:02:54 +00:00
|
|
|
A human-readable version of the same information is available via
|
|
|
|
.IR /proc/cpuinfo .
|
|
|
|
.TP
|
2015-07-08 09:04:49 +00:00
|
|
|
.BR AT_HWCAP2 " (since glibc 2.18)"
|
|
|
|
Further machine-dependent hints about processor capabilities.
|
|
|
|
.TP
|
2012-11-07 12:02:54 +00:00
|
|
|
.BR AT_ICACHEBSIZE
|
|
|
|
The instruction cache block size.
|
|
|
|
.\" .TP
|
|
|
|
.\" .BR AT_IGNORE
|
|
|
|
.\" .TP
|
|
|
|
.\" .BR AT_IGNOREPPC
|
|
|
|
.\" .TP
|
|
|
|
.\" .BR AT_NOTELF
|
|
|
|
.TP
|
2019-09-24 13:11:42 +00:00
|
|
|
.\" Kernel commit 98a5f361b8625c6f4841d6ba013bbf0e80d08147
|
|
|
|
.BR AT_L1D_CACHEGEOMETRY
|
2019-09-24 20:01:19 +00:00
|
|
|
Geometry of the L1 data cache, encoded with the cache line size in bytes
|
|
|
|
in the bottom 16 bits and the cache associativity in the next 16 bits.
|
|
|
|
The associativity is such that if N is the 16-bit value,
|
|
|
|
the cache is N-way set associative.
|
2019-09-24 13:11:42 +00:00
|
|
|
.TP
|
|
|
|
.BR AT_L1D_CACHESIZE
|
|
|
|
The L1 data cache size.
|
|
|
|
.TP
|
|
|
|
.BR AT_L1I_CACHEGEOMETRY
|
2019-09-24 20:02:22 +00:00
|
|
|
Geometry of the L1 instruction cache, encoded as for
|
|
|
|
.BR AT_L1D_CACHEGEOMETRY .
|
2019-09-24 13:11:42 +00:00
|
|
|
.TP
|
|
|
|
.BR AT_L1I_CACHESIZE
|
|
|
|
The L1 instruction cache size.
|
|
|
|
.TP
|
|
|
|
.BR AT_L2_CACHEGEOMETRY
|
2019-09-24 20:02:22 +00:00
|
|
|
Geometry of the L2 cache, encoded as for
|
|
|
|
.BR AT_L1D_CACHEGEOMETRY .
|
2019-09-24 13:11:42 +00:00
|
|
|
.TP
|
|
|
|
.BR AT_L2_CACHESIZE
|
|
|
|
The L2 cache size.
|
|
|
|
.TP
|
|
|
|
.BR AT_L3_CACHEGEOMETRY
|
2019-09-24 20:02:22 +00:00
|
|
|
Geometry of the L3 cache, encoded as for
|
|
|
|
.BR AT_L1D_CACHEGEOMETRY .
|
2019-09-24 13:11:42 +00:00
|
|
|
.TP
|
|
|
|
.BR AT_L3_CACHESIZE
|
|
|
|
The L3 cache size.
|
|
|
|
.TP
|
2012-11-07 12:02:54 +00:00
|
|
|
.BR AT_PAGESZ
|
|
|
|
The system page size (the same value returned by
|
2012-11-11 07:57:52 +00:00
|
|
|
.IR sysconf(_SC_PAGESIZE) ).
|
2012-11-07 12:02:54 +00:00
|
|
|
.TP
|
|
|
|
.BR AT_PHDR
|
|
|
|
The address of the program headers of the executable.
|
|
|
|
.TP
|
|
|
|
.BR AT_PHENT
|
|
|
|
The size of program header entry.
|
|
|
|
.TP
|
|
|
|
.BR AT_PHNUM
|
|
|
|
The number of program headers.
|
|
|
|
.TP
|
|
|
|
.BR AT_PLATFORM
|
|
|
|
A pointer to a string that identifies the hardware platform
|
|
|
|
that the program is running on.
|
|
|
|
The dynamic linker uses this in the interpretation of
|
|
|
|
.IR rpath
|
|
|
|
values.
|
|
|
|
.TP
|
|
|
|
.BR AT_RANDOM
|
|
|
|
The address of sixteen bytes containing a random value.
|
|
|
|
.TP
|
|
|
|
.BR AT_SECURE
|
|
|
|
Has a nonzero value if this executable should be treated securely.
|
|
|
|
Most commonly, a nonzero value indicates that the process is
|
2015-09-13 09:59:48 +00:00
|
|
|
executing a set-user-ID or set-group-ID binary
|
2016-06-15 20:19:22 +00:00
|
|
|
(so that its real and effective UIDs or GIDs differ from one another),
|
2015-09-13 09:59:48 +00:00
|
|
|
or that it gained capabilities by executing
|
|
|
|
a binary file that has capabilities (see
|
2015-09-13 09:58:25 +00:00
|
|
|
.BR capabilities (7)).
|
|
|
|
Alternatively,
|
2012-11-07 12:02:54 +00:00
|
|
|
a nonzero value may be triggered by a Linux Security Module.
|
|
|
|
When this value is nonzero,
|
|
|
|
the dynamic linker disables the use of certain environment variables (see
|
intro.1, localedef.1, memusage.1, memusagestat.1, bpf.2, execve.2, fork.2, keyctl.2, request_key.2, sigaction.2, signal.2, socket.2, dlopen.3, getauxval.3, gnu_get_libc_version.3, pthread_atfork.3, sem_post.3, setjmp.3, strftime.3, veth.4, locale.5, nscd.conf.5, resolv.conf.5, address_families.7, armscii-8.7, ascii.7, capabilities.7, cgroups.7, charsets.7, cp1251.7, cp1252.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, keyrings.7, koi8-r.7, koi8-u.7, libc.7, locale.7, man.7, network_namespaces.7, persistent-keyring.7, session-keyring.7, signal.7, unicode.7, uri.7, user-keyring.7, user-session-keyring.7: ffix: replace - with real\-
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-07-06 12:28:51 +00:00
|
|
|
.BR ld\-linux.so (8))
|
2012-11-07 13:24:27 +00:00
|
|
|
and glibc changes other aspects of its behavior.
|
2012-11-07 12:02:54 +00:00
|
|
|
(See also
|
|
|
|
.BR secure_getenv (3).)
|
|
|
|
.TP
|
|
|
|
.BR AT_SYSINFO
|
2014-02-01 02:50:52 +00:00
|
|
|
The entry point to the system call function in the vDSO.
|
2012-11-07 12:02:54 +00:00
|
|
|
Not present/needed on all architectures (e.g., absent on x86-64).
|
|
|
|
.TP
|
|
|
|
.BR AT_SYSINFO_EHDR
|
2014-02-01 02:50:52 +00:00
|
|
|
The address of a page containing the virtual Dynamic Shared Object (vDSO)
|
2012-11-07 12:02:54 +00:00
|
|
|
that the kernel creates in order to provide fast implementations of
|
|
|
|
certain system calls.
|
|
|
|
.TP
|
|
|
|
.BR AT_UCACHEBSIZE
|
|
|
|
The unified cache block size.
|
|
|
|
.TP
|
|
|
|
.BR AT_UID
|
|
|
|
The real user ID of the thread.
|
|
|
|
.SH RETURN VALUE
|
|
|
|
On success,
|
|
|
|
.BR getauxval ()
|
|
|
|
returns the value corresponding to
|
|
|
|
.IR type .
|
|
|
|
If
|
|
|
|
.I type
|
|
|
|
is not found, 0 is returned.
|
|
|
|
.SH ERRORS
|
2014-07-27 11:47:29 +00:00
|
|
|
.TP
|
|
|
|
.BR ENOENT " (since glibc 2.19)"
|
|
|
|
.\" commit b9ab448f980e296eac21ac65f53783967cc6037b
|
|
|
|
No entry corresponding to
|
|
|
|
.IR type
|
|
|
|
could be found in the auxiliary vector.
|
2012-11-07 12:02:54 +00:00
|
|
|
.SH VERSIONS
|
|
|
|
The
|
|
|
|
.BR getauxval ()
|
|
|
|
function was added to glibc in version 2.16.
|
2014-04-08 07:15:55 +00:00
|
|
|
.SH ATTRIBUTES
|
2014-07-01 04:57:13 +00:00
|
|
|
For an explanation of the terms used in this section, see
|
|
|
|
.BR attributes (7).
|
Various pages: Improve formatting in ATTRIBUTES
Make the formatting more consistent inside the tables in the
ATTRIBUTES sections. Make the source code more uniform; in
particular, eliminate the use of custom tweaks using
'lbwNN'/'lwNN' and .br macros. In addition, ensure that
hyphenation and text justification do not occur inside the tables.
This is a script-driven edit:
[[
PAGE_LIST=$(git grep -l 'SH ATTRIBUTES' man[23])
# Strip out any preexisting .sp/.br/.ad macros
sed -i '/SH ATTR/,/^\.SH/{/^\.sp/d; /^\.br/d; /\.ad/d}' $PAGE_LIST
# Eliminate any use of 'wNN' in tables; default first column
# to fill unused space
sed -i '/SH ATTR/,/^\.SH/s/lbw[0-9]*/lb/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/lw[0-9]*/l/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/^lb /lbx /' $PAGE_LIST
# Nest the tables inside ".ad l"+".nh" and ".hy"+".ad"+".sp 1"
# ".ad l" ==> no right justification of text in table cells
# ".nh" ==> No hyphenation in table cells
# ".sp 1" ==> ensure a blank line before the next section heading
sed -i '/SH ATTR/,/^\.SH/{/\.TS/i.ad l\n.nh
}' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/{/\.TE/a.hy\n.ad\n.sp 1
}' $PAGE_LIST
# In a few of the tables, the third column has a lot of text, so
# make that column wide (rather than the first column)
sed -i '/^lbx/{s/lbx/lb/;s/lb$/lbx/}' \
man3/bindresvport.3 \
man3/fmtmsg.3 man3/gethostbyname.3 man3/getlogin.3 \
man3/getnetent.3 man3/getprotoent.3 man3/getpwent.3 \
man3/getservent.3 man3/getspnam.3 man3/getutent.3 man3/glob.3 \
man3/login.3 \
man3/setnetgrent.3 \
man3/wordexp.3
]]
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-06 09:52:04 +00:00
|
|
|
.ad l
|
|
|
|
.nh
|
2014-07-01 04:57:13 +00:00
|
|
|
.TS
|
|
|
|
allbox;
|
Various pages: Improve formatting in ATTRIBUTES
Make the formatting more consistent inside the tables in the
ATTRIBUTES sections. Make the source code more uniform; in
particular, eliminate the use of custom tweaks using
'lbwNN'/'lwNN' and .br macros. In addition, ensure that
hyphenation and text justification do not occur inside the tables.
This is a script-driven edit:
[[
PAGE_LIST=$(git grep -l 'SH ATTRIBUTES' man[23])
# Strip out any preexisting .sp/.br/.ad macros
sed -i '/SH ATTR/,/^\.SH/{/^\.sp/d; /^\.br/d; /\.ad/d}' $PAGE_LIST
# Eliminate any use of 'wNN' in tables; default first column
# to fill unused space
sed -i '/SH ATTR/,/^\.SH/s/lbw[0-9]*/lb/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/lw[0-9]*/l/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/^lb /lbx /' $PAGE_LIST
# Nest the tables inside ".ad l"+".nh" and ".hy"+".ad"+".sp 1"
# ".ad l" ==> no right justification of text in table cells
# ".nh" ==> No hyphenation in table cells
# ".sp 1" ==> ensure a blank line before the next section heading
sed -i '/SH ATTR/,/^\.SH/{/\.TS/i.ad l\n.nh
}' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/{/\.TE/a.hy\n.ad\n.sp 1
}' $PAGE_LIST
# In a few of the tables, the third column has a lot of text, so
# make that column wide (rather than the first column)
sed -i '/^lbx/{s/lbx/lb/;s/lb$/lbx/}' \
man3/bindresvport.3 \
man3/fmtmsg.3 man3/gethostbyname.3 man3/getlogin.3 \
man3/getnetent.3 man3/getprotoent.3 man3/getpwent.3 \
man3/getservent.3 man3/getspnam.3 man3/getutent.3 man3/glob.3 \
man3/login.3 \
man3/setnetgrent.3 \
man3/wordexp.3
]]
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-06 09:52:04 +00:00
|
|
|
lbx lb lb
|
2014-07-01 04:57:13 +00:00
|
|
|
l l l.
|
|
|
|
Interface Attribute Value
|
|
|
|
T{
|
2014-04-08 07:15:55 +00:00
|
|
|
.BR getauxval ()
|
2014-07-01 04:57:13 +00:00
|
|
|
T} Thread safety MT-Safe
|
|
|
|
.TE
|
Various pages: Improve formatting in ATTRIBUTES
Make the formatting more consistent inside the tables in the
ATTRIBUTES sections. Make the source code more uniform; in
particular, eliminate the use of custom tweaks using
'lbwNN'/'lwNN' and .br macros. In addition, ensure that
hyphenation and text justification do not occur inside the tables.
This is a script-driven edit:
[[
PAGE_LIST=$(git grep -l 'SH ATTRIBUTES' man[23])
# Strip out any preexisting .sp/.br/.ad macros
sed -i '/SH ATTR/,/^\.SH/{/^\.sp/d; /^\.br/d; /\.ad/d}' $PAGE_LIST
# Eliminate any use of 'wNN' in tables; default first column
# to fill unused space
sed -i '/SH ATTR/,/^\.SH/s/lbw[0-9]*/lb/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/lw[0-9]*/l/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/^lb /lbx /' $PAGE_LIST
# Nest the tables inside ".ad l"+".nh" and ".hy"+".ad"+".sp 1"
# ".ad l" ==> no right justification of text in table cells
# ".nh" ==> No hyphenation in table cells
# ".sp 1" ==> ensure a blank line before the next section heading
sed -i '/SH ATTR/,/^\.SH/{/\.TS/i.ad l\n.nh
}' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/{/\.TE/a.hy\n.ad\n.sp 1
}' $PAGE_LIST
# In a few of the tables, the third column has a lot of text, so
# make that column wide (rather than the first column)
sed -i '/^lbx/{s/lbx/lb/;s/lb$/lbx/}' \
man3/bindresvport.3 \
man3/fmtmsg.3 man3/gethostbyname.3 man3/getlogin.3 \
man3/getnetent.3 man3/getprotoent.3 man3/getpwent.3 \
man3/getservent.3 man3/getspnam.3 man3/getutent.3 man3/glob.3 \
man3/login.3 \
man3/setnetgrent.3 \
man3/wordexp.3
]]
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-06 09:52:04 +00:00
|
|
|
.hy
|
|
|
|
.ad
|
|
|
|
.sp 1
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH CONFORMING TO
|
2012-11-07 12:02:54 +00:00
|
|
|
This function is a nonstandard glibc extension.
|
|
|
|
.SH NOTES
|
|
|
|
The primary consumer of the information in the auxiliary vector
|
2019-07-02 08:19:00 +00:00
|
|
|
is the dynamic linker,
|
intro.1, localedef.1, memusage.1, memusagestat.1, bpf.2, execve.2, fork.2, keyctl.2, request_key.2, sigaction.2, signal.2, socket.2, dlopen.3, getauxval.3, gnu_get_libc_version.3, pthread_atfork.3, sem_post.3, setjmp.3, strftime.3, veth.4, locale.5, nscd.conf.5, resolv.conf.5, address_families.7, armscii-8.7, ascii.7, capabilities.7, cgroups.7, charsets.7, cp1251.7, cp1252.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, keyrings.7, koi8-r.7, koi8-u.7, libc.7, locale.7, man.7, network_namespaces.7, persistent-keyring.7, session-keyring.7, signal.7, unicode.7, uri.7, user-keyring.7, user-session-keyring.7: ffix: replace - with real\-
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-07-06 12:28:51 +00:00
|
|
|
.BR ld\-linux.so (8).
|
2012-11-07 12:02:54 +00:00
|
|
|
The auxiliary vector is a convenient and efficient shortcut
|
|
|
|
that allows the kernel to communicate a certain set of standard
|
|
|
|
information that the dynamic linker usually or always needs.
|
|
|
|
In some cases, the same information could be obtained by system calls,
|
|
|
|
but using the auxiliary vector is cheaper.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2012-11-07 12:02:54 +00:00
|
|
|
The auxiliary vector resides just above the argument list and
|
|
|
|
environment in the process address space.
|
|
|
|
The auxiliary vector supplied to a program can be viewed by setting the
|
|
|
|
.B LD_SHOW_AUXV
|
|
|
|
environment variable when running a program:
|
2017-08-15 14:15:21 +00:00
|
|
|
.PP
|
|
|
|
.in +4n
|
|
|
|
.EX
|
|
|
|
$ LD_SHOW_AUXV=1 sleep 1
|
|
|
|
.EE
|
|
|
|
.in
|
|
|
|
.PP
|
2012-11-07 12:02:54 +00:00
|
|
|
The auxiliary vector of any process can (subject to file permissions)
|
|
|
|
be obtained via
|
getrusage.2, madvise.2, memfd_create.2, mlock.2, mount.2, getauxval.3, core.5, capabilities.7, pid_namespaces.7, symlink.7, user_namespaces.7: Consistently use /proc/[pid] (not /proc/PID)
Reported-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-10-07 20:42:07 +00:00
|
|
|
.IR /proc/[pid]/auxv ;
|
2012-11-07 12:02:54 +00:00
|
|
|
see
|
|
|
|
.BR proc (5)
|
|
|
|
for more information.
|
2014-07-27 11:47:29 +00:00
|
|
|
.SH BUGS
|
|
|
|
Before the addition of the
|
|
|
|
.B ENOENT
|
|
|
|
error in glibc 2.19,
|
|
|
|
there was no way to unambiguously distinguish the case where
|
|
|
|
.I type
|
|
|
|
could not be found from the case where the value corresponding to
|
|
|
|
.I type
|
2016-05-13 11:46:59 +00:00
|
|
|
was zero.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH SEE ALSO
|
2021-08-08 01:58:01 +00:00
|
|
|
.BR execve (2),
|
2012-11-07 12:02:54 +00:00
|
|
|
.BR secure_getenv (3),
|
2014-01-01 08:29:53 +00:00
|
|
|
.BR vdso (7),
|
intro.1, localedef.1, memusage.1, memusagestat.1, bpf.2, execve.2, fork.2, keyctl.2, request_key.2, sigaction.2, signal.2, socket.2, dlopen.3, getauxval.3, gnu_get_libc_version.3, pthread_atfork.3, sem_post.3, setjmp.3, strftime.3, veth.4, locale.5, nscd.conf.5, resolv.conf.5, address_families.7, armscii-8.7, ascii.7, capabilities.7, cgroups.7, charsets.7, cp1251.7, cp1252.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, keyrings.7, koi8-r.7, koi8-u.7, libc.7, locale.7, man.7, network_namespaces.7, persistent-keyring.7, session-keyring.7, signal.7, unicode.7, uri.7, user-keyring.7, user-session-keyring.7: ffix: replace - with real\-
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-07-06 12:28:51 +00:00
|
|
|
.BR ld\-linux.so (8)
|