2004-11-03 13:51:07 +00:00
|
|
|
.\" Copyright (C) 2003 Andries Brouwer (aeb@cwi.nl)
|
|
|
|
|
.\"
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:01 +00:00
|
|
|
.\" %%%LICENSE_START(VERBATIM)
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Permission is granted to make and distribute verbatim copies of this
|
|
|
|
|
.\" manual provided the copyright notice and this permission notice are
|
|
|
|
|
.\" preserved on all copies.
|
|
|
|
|
.\"
|
|
|
|
|
.\" Permission is granted to copy and distribute modified versions of this
|
|
|
|
|
.\" manual under the conditions for verbatim copying, provided that the
|
|
|
|
|
.\" entire resulting derived work is distributed under the terms of a
|
|
|
|
|
.\" permission notice identical to this one.
|
2007-04-12 22:42:49 +00:00
|
|
|
.\"
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Since the Linux kernel and libraries are constantly changing, this
|
|
|
|
|
.\" manual page may be incorrect or out-of-date. The author(s) assume no
|
|
|
|
|
.\" responsibility for errors or omissions, or for damages resulting from
|
|
|
|
|
.\" the use of the information contained herein. The author(s) may not
|
|
|
|
|
.\" have taken the same level of care in the production of this manual,
|
|
|
|
|
.\" which is licensed free of charge, as they might when working
|
|
|
|
|
.\" professionally.
|
2007-04-12 22:42:49 +00:00
|
|
|
.\"
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Formatted or processed versions of this manual, if unaccompanied by
|
|
|
|
|
.\" the source, must acknowledge the copyright and authors of this work.
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:40 +00:00
|
|
|
.\" %%%LICENSE_END
|
2004-11-03 13:51:07 +00:00
|
|
|
.\"
|
|
|
|
|
.\" Modified 2003-08-17 by Walter Harms
|
2007-09-20 06:52:22 +00:00
|
|
|
.\" Modified 2004-06-23 by Michael Kerrisk <mtk.manpages@gmail.com>
|
2004-11-03 13:51:07 +00:00
|
|
|
.\"
|
2010-11-21 06:03:45 +00:00
|
|
|
.TH STATFS 2 2010-11-21 "Linux" "Linux Programmer's Manual"
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH NAME
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
statfs, fstatfs \- get filesystem statistics
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH SYNOPSIS
|
|
|
|
|
.BR "#include <sys/vfs.h> " "/* or <sys/statfs.h> */"
|
|
|
|
|
.sp
|
|
|
|
|
.BI "int statfs(const char *" path ", struct statfs *" buf );
|
|
|
|
|
.br
|
|
|
|
|
.BI "int fstatfs(int " fd ", struct statfs *" buf );
|
|
|
|
|
.SH DESCRIPTION
|
|
|
|
|
The function
|
2005-10-19 06:54:38 +00:00
|
|
|
.BR statfs ()
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
returns information about a mounted filesystem.
|
2004-11-03 13:51:07 +00:00
|
|
|
.I path
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
is the pathname of any file within the mounted filesystem.
|
2004-11-03 13:51:07 +00:00
|
|
|
.I buf
|
|
|
|
|
is a pointer to a
|
|
|
|
|
.I statfs
|
|
|
|
|
structure defined approximately as follows:
|
|
|
|
|
|
2007-12-19 06:16:04 +00:00
|
|
|
.in +4n
|
2004-11-03 13:51:07 +00:00
|
|
|
.nf
|
2010-06-13 03:45:16 +00:00
|
|
|
#if __WORDSIZE == 32 /* System word size */
|
2010-09-04 04:45:06 +00:00
|
|
|
# define __SWORD_TYPE int
|
2010-06-13 03:45:16 +00:00
|
|
|
#else /* __WORDSIZE == 64 */
|
|
|
|
|
# define __SWORD_TYPE long int
|
|
|
|
|
#endif
|
|
|
|
|
|
2004-11-03 13:51:07 +00:00
|
|
|
struct statfs {
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
__SWORD_TYPE f_type; /* type of filesystem (see below) */
|
2010-06-13 03:45:16 +00:00
|
|
|
__SWORD_TYPE f_bsize; /* optimal transfer block size */
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
fsblkcnt_t f_blocks; /* total data blocks in filesystem */
|
2010-06-13 03:45:16 +00:00
|
|
|
fsblkcnt_t f_bfree; /* free blocks in fs */
|
|
|
|
|
fsblkcnt_t f_bavail; /* free blocks available to
|
|
|
|
|
unprivileged user */
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
fsfilcnt_t f_files; /* total file nodes in filesystem */
|
2010-06-13 03:45:16 +00:00
|
|
|
fsfilcnt_t f_ffree; /* free file nodes in fs */
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
fsid_t f_fsid; /* filesystem id */
|
2010-06-13 03:45:16 +00:00
|
|
|
__SWORD_TYPE f_namelen; /* maximum length of filenames */
|
|
|
|
|
__SWORD_TYPE f_frsize; /* fragment size (since Linux 2.6) */
|
|
|
|
|
__SWORD_TYPE f_spare[5];
|
2004-11-03 13:51:07 +00:00
|
|
|
};
|
|
|
|
|
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
Filesystem types:
|
2004-11-03 13:51:07 +00:00
|
|
|
|
|
|
|
|
ADFS_SUPER_MAGIC 0xadf5
|
|
|
|
|
AFFS_SUPER_MAGIC 0xADFF
|
2014-06-10 20:12:29 +00:00
|
|
|
BDEVFS_MAGIC 0x62646576
|
2004-11-03 13:51:07 +00:00
|
|
|
BEFS_SUPER_MAGIC 0x42465331
|
|
|
|
|
BFS_MAGIC 0x1BADFACE
|
2014-06-10 20:12:29 +00:00
|
|
|
BINFMTFS_MAGIC 0x42494e4d
|
|
|
|
|
BTRFS_SUPER_MAGIC 0x9123683E
|
|
|
|
|
CGROUP_SUPER_MAGIC 0x27e0eb
|
2004-11-03 13:51:07 +00:00
|
|
|
CIFS_MAGIC_NUMBER 0xFF534D42
|
|
|
|
|
CODA_SUPER_MAGIC 0x73757245
|
|
|
|
|
COH_SUPER_MAGIC 0x012FF7B7
|
|
|
|
|
CRAMFS_MAGIC 0x28cd3d45
|
2014-06-10 20:12:29 +00:00
|
|
|
DEBUGFS_MAGIC 0x64626720
|
2004-11-03 13:51:07 +00:00
|
|
|
DEVFS_SUPER_MAGIC 0x1373
|
2014-06-10 20:12:29 +00:00
|
|
|
DEVPTS_SUPER_MAGIC 0x1cd1
|
|
|
|
|
EFIVARFS_MAGIC 0xde5e81e4
|
2004-11-03 13:51:07 +00:00
|
|
|
EFS_SUPER_MAGIC 0x00414A53
|
|
|
|
|
EXT_SUPER_MAGIC 0x137D
|
|
|
|
|
EXT2_OLD_SUPER_MAGIC 0xEF51
|
|
|
|
|
EXT2_SUPER_MAGIC 0xEF53
|
|
|
|
|
EXT3_SUPER_MAGIC 0xEF53
|
2010-05-24 13:05:59 +00:00
|
|
|
EXT4_SUPER_MAGIC 0xEF53
|
2014-06-10 20:12:29 +00:00
|
|
|
FUSE_SUPER_MAGIC 0x65735546
|
|
|
|
|
FUTEXFS_SUPER_MAGIC 0xBAD1DEA
|
2004-11-03 13:51:07 +00:00
|
|
|
HFS_SUPER_MAGIC 0x4244
|
2014-06-10 20:12:29 +00:00
|
|
|
HOSTFS_SUPER_MAGIC 0x00c0ffee
|
2004-11-03 13:51:07 +00:00
|
|
|
HPFS_SUPER_MAGIC 0xF995E849
|
|
|
|
|
HUGETLBFS_MAGIC 0x958458f6
|
|
|
|
|
ISOFS_SUPER_MAGIC 0x9660
|
|
|
|
|
JFFS2_SUPER_MAGIC 0x72b6
|
|
|
|
|
JFS_SUPER_MAGIC 0x3153464a
|
|
|
|
|
MINIX_SUPER_MAGIC 0x137F /* orig. minix */
|
|
|
|
|
MINIX_SUPER_MAGIC2 0x138F /* 30 char minix */
|
|
|
|
|
MINIX2_SUPER_MAGIC 0x2468 /* minix V2 */
|
|
|
|
|
MINIX2_SUPER_MAGIC2 0x2478 /* minix V2, 30 char names */
|
2014-06-10 20:12:29 +00:00
|
|
|
MINIX3_SUPER_MAGIC 0x4d5a /* minix V3 fs, 60 char names */
|
|
|
|
|
MQUEUE_MAGIC 0x19800202
|
2004-11-03 13:51:07 +00:00
|
|
|
MSDOS_SUPER_MAGIC 0x4d44
|
|
|
|
|
NCP_SUPER_MAGIC 0x564c
|
|
|
|
|
NFS_SUPER_MAGIC 0x6969
|
2014-06-10 20:12:29 +00:00
|
|
|
NILFS_SUPER_MAGIC 0x3434
|
2004-11-03 13:51:07 +00:00
|
|
|
NTFS_SB_MAGIC 0x5346544e
|
|
|
|
|
OPENPROM_SUPER_MAGIC 0x9fa1
|
2014-06-10 20:12:29 +00:00
|
|
|
PIPEFS_MAGIC 0x50495045
|
2004-11-03 13:51:07 +00:00
|
|
|
PROC_SUPER_MAGIC 0x9fa0
|
2014-06-10 20:12:29 +00:00
|
|
|
PSTOREFS_MAGIC 0x6165676C
|
2004-11-03 13:51:07 +00:00
|
|
|
QNX4_SUPER_MAGIC 0x002f
|
2014-06-10 20:12:29 +00:00
|
|
|
QNX6_SUPER_MAGIC 0x68191122
|
|
|
|
|
RAMFS_MAGIC 0x858458f6
|
2004-11-03 13:51:07 +00:00
|
|
|
REISERFS_SUPER_MAGIC 0x52654973
|
|
|
|
|
ROMFS_MAGIC 0x7275
|
2014-06-10 20:12:29 +00:00
|
|
|
SELINUX_MAGIC 0xf97cff8c
|
|
|
|
|
SMACK_MAGIC 0x43415d53
|
2004-11-03 13:51:07 +00:00
|
|
|
SMB_SUPER_MAGIC 0x517B
|
2014-06-10 20:12:29 +00:00
|
|
|
SOCKFS_MAGIC 0x534F434B
|
|
|
|
|
SQUASHFS_MAGIC 0x73717368
|
|
|
|
|
SYSFS_MAGIC 0x62656572
|
2004-11-03 13:51:07 +00:00
|
|
|
SYSV2_SUPER_MAGIC 0x012FF7B6
|
|
|
|
|
SYSV4_SUPER_MAGIC 0x012FF7B5
|
|
|
|
|
TMPFS_MAGIC 0x01021994
|
|
|
|
|
UDF_SUPER_MAGIC 0x15013346
|
|
|
|
|
UFS_MAGIC 0x00011954
|
|
|
|
|
USBDEVICE_SUPER_MAGIC 0x9fa2
|
2014-06-10 20:12:29 +00:00
|
|
|
V9FS_MAGIC 0x01021997
|
2004-11-03 13:51:07 +00:00
|
|
|
VXFS_SUPER_MAGIC 0xa501FCF5
|
2014-06-10 20:12:29 +00:00
|
|
|
XENFS_SUPER_MAGIC 0xabba1974
|
2004-11-03 13:51:07 +00:00
|
|
|
XENIX_SUPER_MAGIC 0x012FF7B4
|
|
|
|
|
XFS_SUPER_MAGIC 0x58465342
|
|
|
|
|
_XIAFS_SUPER_MAGIC 0x012FD16D
|
|
|
|
|
.fi
|
2007-12-19 06:16:04 +00:00
|
|
|
.in
|
2004-11-03 13:51:07 +00:00
|
|
|
.PP
|
2014-06-10 20:12:29 +00:00
|
|
|
Most of these MAGIC constants are defined in
|
|
|
|
|
.I /usr/include/linux/magic.h
|
|
|
|
|
some are hardcoded in kernel sources.
|
|
|
|
|
.PP
|
2004-11-03 13:51:07 +00:00
|
|
|
Nobody knows what
|
|
|
|
|
.I f_fsid
|
|
|
|
|
is supposed to contain (but see below).
|
|
|
|
|
.PP
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
Fields that are undefined for a particular filesystem are set to 0.
|
2005-10-19 06:54:38 +00:00
|
|
|
.BR fstatfs ()
|
2004-11-03 13:51:07 +00:00
|
|
|
returns the same information about an open file referenced by descriptor
|
|
|
|
|
.IR fd .
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH RETURN VALUE
|
2007-04-12 22:42:49 +00:00
|
|
|
On success, zero is returned.
|
|
|
|
|
On error, \-1 is returned, and
|
2004-11-03 13:51:07 +00:00
|
|
|
.I errno
|
|
|
|
|
is set appropriately.
|
|
|
|
|
.SH ERRORS
|
|
|
|
|
.TP
|
|
|
|
|
.B EACCES
|
2005-10-20 15:11:10 +00:00
|
|
|
.RB ( statfs ())
|
2004-11-03 13:51:07 +00:00
|
|
|
Search permission is denied for a component of the path prefix of
|
|
|
|
|
.IR path .
|
|
|
|
|
(See also
|
2007-05-26 12:41:39 +00:00
|
|
|
.BR path_resolution (7).)
|
2004-11-03 13:51:07 +00:00
|
|
|
.TP
|
|
|
|
|
.B EBADF
|
2005-10-20 15:11:10 +00:00
|
|
|
.RB ( fstatfs ())
|
2004-11-03 13:51:07 +00:00
|
|
|
.I fd
|
|
|
|
|
is not a valid open file descriptor.
|
|
|
|
|
.TP
|
|
|
|
|
.B EFAULT
|
|
|
|
|
.I buf
|
|
|
|
|
or
|
|
|
|
|
.I path
|
|
|
|
|
points to an invalid address.
|
|
|
|
|
.TP
|
|
|
|
|
.B EINTR
|
|
|
|
|
This call was interrupted by a signal.
|
|
|
|
|
.TP
|
|
|
|
|
.B EIO
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
An I/O error occurred while reading from the filesystem.
|
2004-11-03 13:51:07 +00:00
|
|
|
.TP
|
|
|
|
|
.B ELOOP
|
2005-10-20 15:11:10 +00:00
|
|
|
.RB ( statfs ())
|
2004-11-03 13:51:07 +00:00
|
|
|
Too many symbolic links were encountered in translating
|
|
|
|
|
.IR path .
|
|
|
|
|
.TP
|
|
|
|
|
.B ENAMETOOLONG
|
2005-10-20 15:11:10 +00:00
|
|
|
.RB ( statfs ())
|
2004-11-03 13:51:07 +00:00
|
|
|
.I path
|
|
|
|
|
is too long.
|
|
|
|
|
.TP
|
|
|
|
|
.B ENOENT
|
2005-10-20 15:11:10 +00:00
|
|
|
.RB ( statfs ())
|
2004-11-03 13:51:07 +00:00
|
|
|
The file referred to by
|
|
|
|
|
.I path
|
|
|
|
|
does not exist.
|
|
|
|
|
.TP
|
|
|
|
|
.B ENOMEM
|
|
|
|
|
Insufficient kernel memory was available.
|
|
|
|
|
.TP
|
|
|
|
|
.B ENOSYS
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
The filesystem does not support this call.
|
2004-11-03 13:51:07 +00:00
|
|
|
.TP
|
|
|
|
|
.B ENOTDIR
|
2005-10-20 15:11:10 +00:00
|
|
|
.RB ( statfs ())
|
2004-11-03 13:51:07 +00:00
|
|
|
A component of the path prefix of
|
|
|
|
|
.I path
|
|
|
|
|
is not a directory.
|
|
|
|
|
.TP
|
|
|
|
|
.B EOVERFLOW
|
|
|
|
|
Some values were too large to be represented in the returned struct.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH CONFORMING TO
|
2007-12-25 21:28:09 +00:00
|
|
|
Linux-specific.
|
2004-11-03 13:51:07 +00:00
|
|
|
The Linux
|
2005-10-19 06:54:38 +00:00
|
|
|
.BR statfs ()
|
2004-11-03 13:51:07 +00:00
|
|
|
was inspired by the 4.4BSD one
|
|
|
|
|
(but they do not use the same structure).
|
2006-05-26 19:32:04 +00:00
|
|
|
.SH NOTES
|
2010-11-21 06:03:45 +00:00
|
|
|
The original Linux
|
|
|
|
|
.BR statfs ()
|
|
|
|
|
and
|
|
|
|
|
.BR fstatfs ()
|
|
|
|
|
system calls were not designed with extremely large file sizes in mind.
|
|
|
|
|
Subsequently, Linux 2.6
|
|
|
|
|
added new
|
|
|
|
|
.BR statfs64 ()
|
2006-05-26 19:32:04 +00:00
|
|
|
and
|
|
|
|
|
.BR fstatfs64 ()
|
2010-11-21 06:03:45 +00:00
|
|
|
system calls that employ a new structure,
|
|
|
|
|
.IR statfs64 .
|
|
|
|
|
The new structure contains the same fields as the original
|
|
|
|
|
.I statfs
|
|
|
|
|
structure, but the sizes of various fields are increased,
|
|
|
|
|
to accommodate large file sizes.
|
|
|
|
|
The glibc
|
|
|
|
|
.BR statfs ()
|
|
|
|
|
and
|
|
|
|
|
.BR fstatfs ()
|
|
|
|
|
wrapper functions transparently deal with the kernel differences.
|
2006-05-26 19:32:04 +00:00
|
|
|
|
2007-06-20 21:53:34 +00:00
|
|
|
Some systems only have \fI<sys/vfs.h>\fP, other systems also have
|
|
|
|
|
\fI<sys/statfs.h>\fP, where the former includes the latter.
|
2007-04-12 22:42:49 +00:00
|
|
|
So it seems
|
2006-05-26 19:32:04 +00:00
|
|
|
including the former is the best choice.
|
|
|
|
|
|
|
|
|
|
LSB has deprecated the library calls
|
|
|
|
|
.BR statfs ()
|
|
|
|
|
and
|
|
|
|
|
.BR fstatfs ()
|
|
|
|
|
and tells us to use
|
2007-05-11 23:07:02 +00:00
|
|
|
.BR statvfs (2)
|
2006-05-26 19:32:04 +00:00
|
|
|
and
|
2007-05-11 23:07:02 +00:00
|
|
|
.BR fstatvfs (2)
|
2006-05-26 19:32:04 +00:00
|
|
|
instead.
|
|
|
|
|
.SS The f_fsid field
|
2004-11-03 13:51:07 +00:00
|
|
|
Solaris, Irix and POSIX have a system call
|
|
|
|
|
.BR statvfs (2)
|
|
|
|
|
that returns a
|
2005-11-02 13:55:25 +00:00
|
|
|
.I "struct statvfs"
|
2004-11-03 13:51:07 +00:00
|
|
|
(defined in
|
2007-12-09 08:08:53 +00:00
|
|
|
.IR <sys/statvfs.h> )
|
2004-11-03 13:51:07 +00:00
|
|
|
containing an
|
2006-02-09 20:24:53 +00:00
|
|
|
.I "unsigned long"
|
2004-11-03 13:51:07 +00:00
|
|
|
.IR f_fsid .
|
2006-08-03 13:57:17 +00:00
|
|
|
Linux, SunOS, HP-UX, 4.4BSD have a system call
|
2005-11-02 11:34:24 +00:00
|
|
|
.BR statfs ()
|
2004-11-03 13:51:07 +00:00
|
|
|
that returns a
|
2005-11-02 13:55:25 +00:00
|
|
|
.I "struct statfs"
|
2004-11-03 13:51:07 +00:00
|
|
|
(defined in
|
2007-12-09 08:08:53 +00:00
|
|
|
.IR <sys/vfs.h> )
|
2004-11-03 13:51:07 +00:00
|
|
|
containing a
|
2006-02-09 20:24:53 +00:00
|
|
|
.I fsid_t
|
2004-11-03 13:51:07 +00:00
|
|
|
.IR f_fsid ,
|
|
|
|
|
where
|
|
|
|
|
.I fsid_t
|
|
|
|
|
is defined as
|
2005-11-02 13:55:25 +00:00
|
|
|
.IR "struct { int val[2]; }" .
|
2004-11-03 13:51:07 +00:00
|
|
|
The same holds for FreeBSD, except that it uses the include file
|
2007-12-09 08:08:53 +00:00
|
|
|
.IR <sys/mount.h> .
|
2004-11-03 13:51:07 +00:00
|
|
|
|
|
|
|
|
The general idea is that
|
|
|
|
|
.I f_fsid
|
|
|
|
|
contains some random stuff such that the pair
|
|
|
|
|
.RI ( f_fsid , ino )
|
|
|
|
|
uniquely determines a file.
|
2010-06-13 03:30:04 +00:00
|
|
|
Some operating systems use (a variation on) the device number, or the device number
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
combined with the filesystem type.
|
2004-11-03 13:51:07 +00:00
|
|
|
Several OSes restrict giving out the
|
|
|
|
|
.I f_fsid
|
2006-06-03 01:26:30 +00:00
|
|
|
field to the superuser only (and zero it for unprivileged users),
|
intro.1, time.1, access.2, acct.2, alloc_hugepages.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clone.2, close.2, execve.2, fallocate.2, fcntl.2, getdents.2, getrusage.2, getxattr.2, init_module.2, inotify_add_watch.2, ioprio_set.2, kcmp.2, link.2, listxattr.2, lseek.2, madvise.2, mkdir.2, mknod.2, mmap.2, mount.2, move_pages.2, msgctl.2, nfsservctl.2, open.2, pivot_root.2, quotactl.2, read.2, readlink.2, removexattr.2, rename.2, rmdir.2, semctl.2, setfsgid.2, setfsuid.2, setresuid.2, setuid.2, setup.2, setxattr.2, shmctl.2, splice.2, spu_create.2, stat.2, statfs.2, swapon.2, symlink.2, sync.2, sync_file_range.2, sysfs.2, truncate.2, umount.2, unlink.2, unshare.2, ustat.2, utime.2, utimensat.2, write.2, btree.3, errno.3, fexecve.3, ftw.3, futimes.3, get_nprocs_conf.3, getcwd.3, getdirentries.3, getmntent.3, glob.3, mkfifo.3, mq_open.3, readdir.3, realpath.3, recno.3, remove.3, sem_open.3, shm_open.3, statvfs.3, sysconf.3, telldir.3, tmpfile.3, cciss.4, initrd.4, pts.4, sk98lin.4, vcs.4, core.5, filesystems.5, proc.5, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, feature_test_macros.7, fifo.7, hier.7, inotify.7, intro.7, mq_overview.7, path_resolution.7, pipe.7, sem_overview.7, shm_overview.7, spufs.7, symlink.7, unix.7, uri.7, sync.8: Global fix: s/file system/filesystem/
Notwithstanding 24d01c530c5a3f75217543d02bf6712395e5f90c,
"filesystem" is the form used by the great majority of man pages
outside the man-pages project and in a number of other sources,
so let's go with that.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-08-08 08:07:57 +00:00
|
|
|
because this field is used in the filehandle of the filesystem
|
2004-11-03 13:51:07 +00:00
|
|
|
when NFS-exported, and giving it out is a security concern.
|
|
|
|
|
.LP
|
2010-11-01 06:42:29 +00:00
|
|
|
Under some operating systems the
|
2004-11-03 13:51:07 +00:00
|
|
|
.I fsid
|
2008-07-10 20:53:08 +00:00
|
|
|
can be used as second argument to the
|
Changes, clone.2, mount.2, nanosleep.2, sigaltstack.2, statfs.2, timer_settime.2, ctime.3, fmemopen.3, nl_langinfo.3, posix_memalign.3, pthread_attr_init.3, pthread_setaffinity_np.3, pthread_setschedprio.3, pthread_testcancel.3, setjmp.3, sigwait.3, tty_ioctl.4, epoll.7, posixoptions.7, unix.7: Add section number to references to functions documented in other pages
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-11-01 07:07:28 +00:00
|
|
|
.BR sysfs (2)
|
2004-11-03 13:51:07 +00:00
|
|
|
system call.
|
2014-06-10 20:21:42 +00:00
|
|
|
.SH BUGS
|
2014-06-10 20:26:45 +00:00
|
|
|
From Linux 2.6.38 up to and including Linux 3.1,
|
2014-06-10 20:21:42 +00:00
|
|
|
.\" broken in commit ff0c7d15f9787b7e8c601533c015295cc68329f8
|
|
|
|
|
.\" fixed in commit d70ef97baf048412c395bb5d65791d8fe133a52b
|
|
|
|
|
.BR fstatfs ()
|
|
|
|
|
failed with the error
|
|
|
|
|
.B ENOSYS
|
|
|
|
|
for file descriptors created by
|
|
|
|
|
.BR pipe (2).
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH SEE ALSO
|
2004-11-03 13:51:07 +00:00
|
|
|
.BR stat (2),
|
2007-05-26 12:41:39 +00:00
|
|
|
.BR statvfs (2),
|
|
|
|
|
.BR path_resolution (7)
|