2004-11-03 13:51:07 +00:00
|
|
|
.\" Copyright 1993 David Metcalfe (david@prism.demon.co.uk)
|
|
|
|
.\"
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:01 +00:00
|
|
|
.\" %%%LICENSE_START(VERBATIM)
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Permission is granted to make and distribute verbatim copies of this
|
|
|
|
.\" manual provided the copyright notice and this permission notice are
|
|
|
|
.\" preserved on all copies.
|
|
|
|
.\"
|
|
|
|
.\" Permission is granted to copy and distribute modified versions of this
|
|
|
|
.\" manual under the conditions for verbatim copying, provided that the
|
|
|
|
.\" entire resulting derived work is distributed under the terms of a
|
|
|
|
.\" permission notice identical to this one.
|
2007-04-12 22:42:49 +00:00
|
|
|
.\"
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Since the Linux kernel and libraries are constantly changing, this
|
|
|
|
.\" manual page may be incorrect or out-of-date. The author(s) assume no
|
|
|
|
.\" responsibility for errors or omissions, or for damages resulting from
|
|
|
|
.\" the use of the information contained herein. The author(s) may not
|
|
|
|
.\" have taken the same level of care in the production of this manual,
|
|
|
|
.\" which is licensed free of charge, as they might when working
|
|
|
|
.\" professionally.
|
2007-04-12 22:42:49 +00:00
|
|
|
.\"
|
2004-11-03 13:51:07 +00:00
|
|
|
.\" Formatted or processed versions of this manual, if unaccompanied by
|
|
|
|
.\" the source, must acknowledge the copyright and authors of this work.
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:40 +00:00
|
|
|
.\" %%%LICENSE_END
|
2004-11-03 13:51:07 +00:00
|
|
|
.\"
|
|
|
|
.\" References consulted:
|
|
|
|
.\" Linux libc source code
|
|
|
|
.\" Lewine's _POSIX Programmer's Guide_ (O'Reilly & Associates, 1991)
|
|
|
|
.\" 386BSD man pages
|
|
|
|
.\" Modified Sun Jul 25 11:01:58 1993 by Rik Faith (faith@cs.unc.edu)
|
|
|
|
.\" Modified 2001-11-13, aeb
|
2004-12-01 14:10:12 +00:00
|
|
|
.\" Modified 2004-12-01 mtk and Martin Schulze <joey@infodrom.org>
|
|
|
|
.\"
|
time.1, access.2, arch_prctl.2, cacheflush.2, capget.2, clone.2, execve.2, fcntl.2, fork.2, getpid.2, getxattr.2, ioctl.2, ioctl_fat.2, killpg.2, listxattr.2, madvise.2, migrate_pages.2, modify_ldt.2, mprotect.2, msgget.2, msgop.2, perf_event_open.2, ptrace.2, sched_setattr.2, semget.2, semop.2, sendfile.2, set_thread_area.2, setxattr.2, stat.2, statfs.2, wait.2, wait4.2, encrypt.3, mktemp.3, pthread_attr_setschedparam.3, resolver.3, statvfs.3, syslog.3, tzset.3, core.5, host.conf.5, intro.5, proc.5, resolv.conf.5, pthreads.7, socket.7, unix.7, ld.so.8, ldconfig.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-02-21 08:26:52 +00:00
|
|
|
.TH TZSET 3 2015-02-21 "" "Linux Programmer's Manual"
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH NAME
|
|
|
|
tzset, tzname, timezone, daylight \- initialize time conversion information
|
|
|
|
.SH SYNOPSIS
|
|
|
|
.nf
|
|
|
|
.B #include <time.h>
|
|
|
|
.sp
|
|
|
|
.B void tzset (void);
|
|
|
|
.sp
|
|
|
|
.BI "extern char *" tzname [2];
|
|
|
|
.BI "extern long " timezone ;
|
|
|
|
.BI "extern int " daylight ;
|
|
|
|
.fi
|
2007-07-08 12:11:40 +00:00
|
|
|
.sp
|
|
|
|
.in -4n
|
|
|
|
Feature Test Macro Requirements for glibc (see
|
|
|
|
.BR feature_test_macros (7)):
|
|
|
|
.in
|
|
|
|
.sp
|
|
|
|
.BR tzset ():
|
2008-08-29 15:50:13 +00:00
|
|
|
_POSIX_C_SOURCE\ >=\ 1 || _XOPEN_SOURCE || _POSIX_SOURCE
|
2007-07-08 12:11:40 +00:00
|
|
|
.br
|
|
|
|
.IR tzname :
|
2008-08-29 15:50:13 +00:00
|
|
|
_POSIX_C_SOURCE\ >=\ 1 || _XOPEN_SOURCE || _POSIX_SOURCE
|
2007-07-08 12:11:40 +00:00
|
|
|
.br
|
|
|
|
.IR timezone :
|
|
|
|
_SVID_SOURCE || _XOPEN_SOURCE
|
|
|
|
.br
|
|
|
|
.IR daylight :
|
|
|
|
_SVID_SOURCE || _XOPEN_SOURCE
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH DESCRIPTION
|
2007-05-12 09:06:04 +00:00
|
|
|
The
|
|
|
|
.BR tzset ()
|
|
|
|
function initializes the \fItzname\fP variable from the
|
2007-06-22 20:40:07 +00:00
|
|
|
.B TZ
|
|
|
|
environment variable.
|
2007-04-12 22:42:49 +00:00
|
|
|
This function is automatically called by the
|
2008-09-07 04:17:25 +00:00
|
|
|
other time conversion functions that depend on the timezone.
|
2010-01-16 18:05:25 +00:00
|
|
|
In a System-V-like environment, it will also set the variables \fItimezone\fP
|
2010-01-16 18:17:39 +00:00
|
|
|
(seconds West of UTC) and \fIdaylight\fP (to 0 if this timezone does not
|
2010-01-16 18:05:25 +00:00
|
|
|
have any daylight saving time rules, or to nonzero if there is a time during
|
2006-09-18 11:38:09 +00:00
|
|
|
the year when daylight saving time applies).
|
2004-11-03 13:51:07 +00:00
|
|
|
.PP
|
2007-06-22 20:40:07 +00:00
|
|
|
If the
|
|
|
|
.B TZ
|
tzset.3: Correct system timezone file path
The manual incorrectly states the system timezone
path as /usr/share/zoneinfo/localtime. Glibc does
not use that file for anything, it uses
$(prefix)/etc/localtime.
There is an ambiguous reference in the man-page to
/etc/localtime, but it does not indicate that it
will be used. It states clearly that
/usr/share/zoneinfo/localtime is used.
A comment in the glibc Makeconfig even says that
file should not exist:
> ... relative to $(zonedir). It is a good idea
> to put this somewhere other than there, so the
> zoneinfo directory contains only universal data,
> localizing the configuration data elsewhere.
Furthermore, the man page does not indicate the
reason this file is being used; which is because
it is the configured system timezone.
A later patch in this series addresses the
possibility that /etc/localtime could be changed
during glibc's compilation. The language changed
in this patch points to the FILE section which is
where the explanation will be. There is no reason
to repeat that information multiple times
throughout the man-page.
EVIDENCE:
glibc/Makeconfig:256: sysconfdir = $(prefix)/etc
glibc/Makeconfig:272: localtime-file = $(sysconfdir)/localtime
FROM INFO LIBC:
C.2 Installing the C Library
============================
To configure the locally used timezone, set the `TZ' environment
variable. The script `tzselect' helps you to select the right value.
As an example, for Germany, `tzselect' would tell you to use
`TZ='Europe/Berlin''. For a system wide installation (the given paths
are for an installation with `--prefix=/usr'), link the timezone file
which is in `/usr/share/zoneinfo' to the file `/etc/localtime'. For
Germany, you might execute `ln -s /usr/share/zoneinfo/Europe/Berlin
/etc/localtime'.
STEPS TO REPRODUCE:
cd /usr/share/zoneinfo/
cp Antarctica/South_Pole localtime
cp /US/Eastern /etc/localtime
cd
date
Sun Jan 18 12:06:36 EST 2015
TZ=:/usr/share/zoneinfo/localtime date
Mon Jan 19 06:06:54 NZDT 2015
rm /etc/localtime
date
Sun Jan 18 17:08:37 UTC 2015
TZ=:/usr/share/zoneinfo/localtime date
Mon Jan 19 06:08:41 NZDT 2015
Signed-off-by: J William Piggott <elseifthen@gmx.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-01-18 20:04:50 +00:00
|
|
|
variable does not appear in the environment, the system timezone is used.
|
|
|
|
The system timezone is configured by copying, or linking, a file in the
|
|
|
|
.BR tzfile "(5) format to"
|
|
|
|
.IR /etc/localtime .
|
|
|
|
A timezone database of these files may be located in the system
|
|
|
|
timezone directory (see the \fBFILES\fP section below).
|
2004-11-03 13:51:07 +00:00
|
|
|
.PP
|
2007-06-22 20:40:07 +00:00
|
|
|
If the
|
|
|
|
.B TZ
|
2015-02-01 13:18:02 +00:00
|
|
|
variable does appear in the environment, but its value is empty,
|
2004-11-03 13:51:07 +00:00
|
|
|
or its value cannot be interpreted using any of the formats specified
|
2015-02-01 13:18:02 +00:00
|
|
|
below, then Coordinated Universal Time (UTC) is used.
|
2004-11-03 13:51:07 +00:00
|
|
|
.PP
|
2007-06-22 20:40:07 +00:00
|
|
|
The value of
|
|
|
|
.B TZ
|
2015-02-01 13:16:26 +00:00
|
|
|
can be one of two formats.
|
|
|
|
The first format is a string of characters that directly represent the
|
|
|
|
timezone to be used:
|
2004-11-03 13:51:07 +00:00
|
|
|
.sp
|
|
|
|
.RS
|
2015-02-02 06:37:31 +00:00
|
|
|
.IR "std offset" [ dst [ offset ][, start [ /time ], end [ /time ]]]
|
2004-11-03 13:51:07 +00:00
|
|
|
.RE
|
|
|
|
.sp
|
2015-01-25 14:09:37 +00:00
|
|
|
There are no spaces in the specification.
|
2008-09-07 04:17:25 +00:00
|
|
|
The \fIstd\fP string specifies the name of the timezone and must be
|
2007-04-12 22:42:49 +00:00
|
|
|
three or more alphabetic characters.
|
|
|
|
The \fIoffset\fP string immediately
|
2004-11-03 13:51:07 +00:00
|
|
|
follows \fIstd\fP and specifies the time value to be added to the local
|
2007-04-12 22:42:49 +00:00
|
|
|
time to get Coordinated Universal Time (UTC).
|
|
|
|
The \fIoffset\fP is positive
|
2008-09-07 04:17:25 +00:00
|
|
|
if the local timezone is west of the Prime Meridian and negative if it is
|
2007-04-12 22:42:49 +00:00
|
|
|
east.
|
2015-02-14 02:08:52 +00:00
|
|
|
The hour must be between 0 and 24, and the minutes and seconds 00 and 59:
|
|
|
|
.sp
|
|
|
|
.RS
|
|
|
|
.RI [ + | - ] hh [ :mm [ :ss ]]
|
|
|
|
.RE
|
|
|
|
.sp
|
2004-11-03 13:51:07 +00:00
|
|
|
.PP
|
2007-04-12 22:42:49 +00:00
|
|
|
The \fIdst\fP string and \fIoffset\fP specify the name and offset for the
|
2008-09-07 04:17:25 +00:00
|
|
|
corresponding daylight saving timezone.
|
2007-04-12 22:42:49 +00:00
|
|
|
If the offset is omitted,
|
2015-02-01 13:18:02 +00:00
|
|
|
it defaults to one hour ahead of standard time.
|
2004-11-03 13:51:07 +00:00
|
|
|
.PP
|
2006-09-18 11:38:09 +00:00
|
|
|
The \fIstart\fP field specifies when daylight saving time goes into
|
2004-11-03 13:51:07 +00:00
|
|
|
effect and the \fIend\fP field specifies when the change is made back to
|
2007-04-12 22:42:49 +00:00
|
|
|
standard time.
|
|
|
|
These fields may have the following formats:
|
2004-11-03 13:51:07 +00:00
|
|
|
.TP
|
|
|
|
J\fIn\fP
|
2007-04-12 22:42:49 +00:00
|
|
|
This specifies the Julian day with \fIn\fP between 1 and 365.
|
2012-03-24 03:15:51 +00:00
|
|
|
Leap days are not counted.
|
|
|
|
In this format, February 29 can't be represented;
|
|
|
|
February 28 is day 59, and March 1 is always day 60.
|
2007-04-12 22:42:49 +00:00
|
|
|
.TP
|
2004-11-03 13:51:07 +00:00
|
|
|
.I n
|
2012-03-24 03:15:51 +00:00
|
|
|
This specifies the zero-based Julian day with \fIn\fP between 0 and 365.
|
2007-04-12 22:42:49 +00:00
|
|
|
February 29 is counted in leap years.
|
|
|
|
.TP
|
2004-11-03 13:51:07 +00:00
|
|
|
M\fIm\fP.\fIw\fP.\fId\fP
|
2007-04-12 22:42:49 +00:00
|
|
|
This specifies day \fId\fP (0 <= \fId\fP <= 6) of week \fIw\fP
|
|
|
|
(1 <= \fIw\fP <= 5) of month \fIm\fP (1 <= \fIm\fP <= 12).
|
|
|
|
Week 1 is
|
|
|
|
the first week in which day \fId\fP occurs and week 5 is the last week
|
|
|
|
in which day \fId\fP occurs.
|
|
|
|
Day 0 is a Sunday.
|
2004-11-03 13:51:07 +00:00
|
|
|
.PP
|
|
|
|
The \fItime\fP fields specify when, in the local time currently in effect,
|
2007-04-12 22:42:49 +00:00
|
|
|
the change to the other time occurs.
|
|
|
|
If omitted, the default is 02:00:00.
|
2006-09-18 11:38:09 +00:00
|
|
|
|
2007-04-12 22:42:49 +00:00
|
|
|
Here is an example for New Zealand,
|
|
|
|
where the standard time (NZST) is 12 hours ahead of UTC,
|
|
|
|
and daylight saving time (NZDT), 13 hours ahead of UTC,
|
2006-09-18 11:38:09 +00:00
|
|
|
runs from the first Sunday in October to the third Sunday in March,
|
|
|
|
and the changeovers happen at the default time of 02:00:00:
|
|
|
|
.nf
|
|
|
|
|
2011-09-08 15:24:39 +00:00
|
|
|
TZ="NZST-12:00:00NZDT-13:00:00,M10.1.0,M3.3.0"
|
2006-09-18 11:38:09 +00:00
|
|
|
.fi
|
2004-11-03 13:51:07 +00:00
|
|
|
.PP
|
2015-02-01 13:16:26 +00:00
|
|
|
The second format specifies that the timezone information should be read
|
2004-11-03 13:51:07 +00:00
|
|
|
from a file:
|
|
|
|
.sp
|
|
|
|
.RS
|
|
|
|
:[filespec]
|
|
|
|
.RE
|
|
|
|
.sp
|
2015-01-18 20:00:07 +00:00
|
|
|
If the file specification \fIfilespec\fP is omitted, or its value cannot
|
|
|
|
be interpreted, then Coordinated Universal Time (UTC) is used.
|
2007-04-12 22:42:49 +00:00
|
|
|
If \fIfilespec\fP is given, it specifies another
|
2004-11-03 13:51:07 +00:00
|
|
|
.BR tzfile (5)-format
|
2008-09-07 04:17:25 +00:00
|
|
|
file to read the timezone information from.
|
2008-06-09 15:49:35 +00:00
|
|
|
If \fIfilespec\fP does not begin with a \(aq/\(aq, the file specification is
|
2015-01-18 20:10:18 +00:00
|
|
|
relative to the system timezone directory. If the colon is omitted each
|
2015-02-01 13:16:26 +00:00
|
|
|
of the above \fBTZ\fP formats will be tried.
|
2006-09-18 11:38:09 +00:00
|
|
|
.PP
|
|
|
|
Here's an example, once more for New Zealand:
|
|
|
|
.nf
|
|
|
|
|
|
|
|
TZ=":Pacific/Auckland"
|
|
|
|
.fi
|
2015-01-29 16:27:07 +00:00
|
|
|
.SH ENVIRONMENT
|
|
|
|
.TP
|
|
|
|
.B TZ
|
|
|
|
If this variable is set its value takes precedence over the system
|
|
|
|
configured timezone.
|
|
|
|
.TP
|
|
|
|
.B TZDIR
|
|
|
|
If this variable is set its value takes precedence over the system
|
|
|
|
configured timezone database directory path.
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH FILES
|
2015-01-29 16:27:07 +00:00
|
|
|
.TP
|
2015-02-16 17:12:37 +00:00
|
|
|
.I /etc/localtime
|
2015-01-29 16:27:07 +00:00
|
|
|
The system timezone file.
|
|
|
|
.TP
|
2015-02-16 17:12:37 +00:00
|
|
|
.I /usr/share/zoneinfo/
|
2015-01-29 16:27:07 +00:00
|
|
|
The system timezone database directory.
|
|
|
|
.TP
|
2015-02-16 17:12:37 +00:00
|
|
|
.I /usr/share/zoneinfo/posixrules
|
2015-01-29 16:31:06 +00:00
|
|
|
When a TZ string includes a dst timezone without anything following it,
|
|
|
|
then this file is used for the start/end rules.
|
|
|
|
It is in the
|
|
|
|
.BR tzfile "(5) format."
|
|
|
|
By default, the zoneinfo Makefile hard links it to the
|
|
|
|
.IR America/New_York " tzfile."
|
2015-01-29 16:27:07 +00:00
|
|
|
.PP
|
|
|
|
Above are the current standard file locations, but they are
|
|
|
|
configurable when glibc is compiled.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH CONFORMING TO
|
2008-07-15 13:39:17 +00:00
|
|
|
SVr4, POSIX.1-2001, 4.3BSD.
|
2004-11-03 13:51:07 +00:00
|
|
|
.SH NOTES
|
|
|
|
Note that the variable \fIdaylight\fP does not indicate that daylight
|
2007-04-12 22:42:49 +00:00
|
|
|
saving time applies right now.
|
|
|
|
It used to give the number of some
|
2004-11-03 13:51:07 +00:00
|
|
|
algorithm (see the variable \fItz_dsttime\fP in
|
|
|
|
.BR gettimeofday (2)).
|
|
|
|
It has been obsolete for many years but is required by SUSv2.
|
|
|
|
.LP
|
2004-12-01 14:10:12 +00:00
|
|
|
4.3BSD had a function
|
|
|
|
.BI "char *timezone(" zone ", " dst )
|
|
|
|
that returned the
|
2008-09-07 04:17:25 +00:00
|
|
|
name of the timezone corresponding to its first argument (minutes
|
2010-01-16 18:17:39 +00:00
|
|
|
West of UTC).
|
2007-04-12 22:42:49 +00:00
|
|
|
If the second argument was 0, the standard name was used,
|
2006-09-18 11:38:09 +00:00
|
|
|
otherwise the daylight saving time version.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH SEE ALSO
|
2004-11-03 13:51:07 +00:00
|
|
|
.BR date (1),
|
|
|
|
.BR gettimeofday (2),
|
|
|
|
.BR time (2),
|
|
|
|
.BR ctime (3),
|
|
|
|
.BR getenv (3),
|
|
|
|
.BR tzfile (5)
|