f25ea51b98
poll.2, select.2: Add a reference to the sigset discussion in sigprocmask(2)
...
A little while back, I added a note to sigprocmask.2 that
discussed the difference between the libc's and the kernel's
sigset_t structures. I added that note, because I saw this being
done wrong in a tool tracing system calls (causing subtle bugs).
As it turns out, the same bugs existed for ppoll and pselect, for
the same reason. I'm hoping by adding the reference here, future
writers of similar tools will find that discussion and not make
the same mistake.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-12-27 21:05:48 +01:00
979867082b
locale.1, localedef.1, _exit.2, accept.2, access.2, acct.2, adjtimex.2, bdflush.2, bind.2, bpf.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_ctl.2, eventfd.2, execve.2, fallocate.2, fanotify_init.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, getdomainname.2, getgroups.2, gethostname.2, getpagesize.2, getpeername.2, getsid.2, getsockname.2, getsockopt.2, gettimeofday.2, init_module.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, kexec_load.2, kill.2, killpg.2, link.2, listen.2, llseek.2, lseek.2, madvise.2, memfd_create.2, mincore.2, mkdir.2, mknod.2, mmap.2, mount.2, nanosleep.2, nice.2, open.2, personality.2, pipe.2, poll.2, posix_fadvise.2, read.2, readahead.2, readlink.2, readv.2, recv.2, recvmmsg.2, rename.2, request_key.2, sched_setaffinity.2, sched_setattr.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendfile.2, sendmmsg.2, seteuid.2, setns.2, setpgid.2, setreuid.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigsuspend.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, symlink.2, sync.2, syscall.2, syscalls.2, times.2, truncate.2, unlink.2, unshare.2, uselib.2, utimensat.2, vfork.2, vhangup.2, wait.2, wait4.2, write.2, a64l.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_read.3, aio_write.3, asin.3, asinh.3, atan.3, atan2.3, atanh.3, atoi.3, backtrace.3, cbrt.3, ceil.3, cfree.3, clearenv.3, clock_getcpuclockid.3, clog10.3, cmsg.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, daemon.3, dirfd.3, div.3, dl_iterate_phdr.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, endian.3, erf.3, erfc.3, errno.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, ferror.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmin.3, fmod.3, fopen.3, fpclassify.3, frexp.3, fseeko.3, fts.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getline.3, getloadavg.3, getmntent.3, getnameinfo.3, getnetent_r.3, getpass.3, getprotoent_r.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getservent_r.3, getspnam.3, getsubopt.3, getusershell.3, getutent.3, getw.3, gsignal.3, hypot.3, ilogb.3, inet.3, initgroups.3, insque.3, isalpha.3, isgreater.3, iswblank.3, j0.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, makedev.3, matherr.3, mbsnrtowcs.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_receive.3, mq_send.3, nan.3, nextafter.3, on_exit.3, open_memstream.3, opendir.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, psignal.3, pthread_attr_setstack.3, pthread_setaffinity_np.3, putenv.3, putpwent.3, qecvt.3, rand.3, random.3, random_r.3, rcmd.3, readdir.3, realpath.3, remainder.3, remquo.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, scalb.3, scalbln.3, scandir.3, scanf.3, seekdir.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setnetgrent.3, siginterrupt.3, signbit.3, significand.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stpcpy.3, stpncpy.3, strdup.3, strerror.3, strftime.3, strlen.3, strnlen.3, strsep.3, strsignal.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, unlocked_stdio.3, usleep.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wprintf.3, y0.3, pts.4, st.4, tty_ioctl.4, elf.5, gai.conf.5, group.5, locale.5, nsswitch.conf.5, proc.5, utmp.5, aio.7, capabilities.7, credentials.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, mq_overview.7, namespaces.7, pipe.7, signal.7, socket.7, standards.7, svipc.7, symlink.7, time.7, unicode.7, unix.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-15 17:30:43 +13:00
f14637570d
poll.2: Document spurious EAGAIN error that can occur on other systems
...
Light reworking of text proposed by Josh Triplett.
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-02-04 12:34:06 +01:00
29b41e747f
accept.2, acct.2, bind.2, clock_getres.2, connect.2, dup.2, epoll_create.2, eventfd.2, execve.2, fanotify_init.2, fcntl.2, fork.2, futex.2, get_robust_list.2, getcpu.2, getpeername.2, getrlimit.2, getsockname.2, getsockopt.2, gettimeofday.2, inotify_init.2, listen.2, membarrier.2, memfd_create.2, mlock.2, mmap.2, personality.2, pipe.2, poll.2, recv.2, send.2, sendfile.2, shmget.2, shutdown.2, sigreturn.2, socket.2, socketcall.2, socketpair.2, spu_create.2, swapon.2, time.2, timerfd_create.2, uselib.2, dlerror.3, dlopen.3, drand48.3, errno.3, fnmatch.3, getgrent.3, getgrnam.3, getlogin.3, getpwent.3, getpwnam.3, iconv.3, mq_open.3, opendir.3, random_r.3, sem_open.3, shm_open.3, tmpfile.3, tzset.3, random.4, fanotify.7, futex.7, vdso.7, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-29 13:48:42 +01:00
0bf502fc7f
poll.2: Shorten name of timeout argument for ppoll()
...
The name is overly long, and does not hint at the fact
that this argument is a pointer. Fix this by renaming:
s/timeout_ts/tmo_p/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-23 23:25:41 +01:00
32c8dbc049
poll.2: timeout_ts is a pointer, so use -> not . for member access
...
From the context, it is apparent that in the code explaining
ppoll in terms of poll, timeout_ts must be a pointer.
Usage #1 : ready = ppoll(&fds, nfds, timeout_ts, &sigmask);
Usage #2 : (timeout_ts == NULL)
Thus member access in (timeout_ts.tv_sec * 1000 +
timeout_ts.tv_nsec / 1000000) is an error.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-23 23:19:09 +01:00
a2dcc3bbbc
poll.2: CONFORMING TO: add POSIX.1-2008
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-07-24 09:32:04 +02:00
5722c835ab
intro.1, locale.1, _exit.2, access.2, bpf.2, brk.2, capget.2, chmod.2, chroot.2, clock_getres.2, clone.2, eventfd.2, fallocate.2, fork.2, getgroups.2, gethostname.2, getpid.2, getpriority.2, getrlimit.2, getrusage.2, gettid.2, iopl.2, ioprio_set.2, killpg.2, mlock.2, mprotect.2, perf_event_open.2, poll.2, posix_fadvise.2, pread.2, ptrace.2, read.2, readv.2, recv.2, rename.2, sched_setaffinity.2, sched_setattr.2, seccomp.2, select.2, send.2, seteuid.2, setgid.2, setresuid.2, setreuid.2, setuid.2, sigaltstack.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, stat.2, timer_create.2, uname.2, utimensat.2, wait.2, wait4.2, write.2, MB_LEN_MAX.3, __ppc_get_timebase.3, clearenv.3, dl_iterate_phdr.3, error.3, fexecve.3, fpurge.3, fread.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getgrent_r.3, gethostbyname.3, getifaddrs.3, getnameinfo.3, getnetent_r.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent_r.3, getrpcent.3, getrpcent_r.3, getrpcport.3, getservent.3, getservent_r.3, gsignal.3, key_setsecret.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, memcpy.3, mq_notify.3, mq_open.3, perror.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_detach.3, pthread_getattr_np.3, pthread_join.3, pthread_setname_np.3, pthread_tryjoin_np.3, putgrent.3, rcmd.3, rpc.3, rpmatch.3, sem_close.3, sem_open.3, setaliasent.3, shm_open.3, sigqueue.3, strfmon.3, xcrypt.3, xdr.3, console_codes.4, null.4, core.5, host.conf.5, hosts.equiv.5, locale.5, repertoiremap.5, locale.7, man-pages.7, pty.7, rtld-audit.7, sched.7, vdso.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-07-23 16:12:28 +02:00
0722a578ed
_exit.2, access.2, brk.2, chmod.2, clone.2, epoll_wait.2, eventfd.2, fork.2, getgroups.2, gethostname.2, getpid.2, getpriority.2, killpg.2, mmap.2, poll.2, posix_fadvise.2, pread.2, ptrace.2, readv.2, sched_setaffinity.2, select.2, seteuid.2, setgid.2, setresuid.2, setreuid.2, setuid.2, sigaction.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, stat.2, timer_create.2, uname.2, wait.2, wait4.2, mq_notify.3, mq_open.3, sigqueue.3, man-pages.7: Remove "ABI" from "C library/kernel ABI differences" subheadings
...
The "ABI" doesn't really convey anything significant in
the title. These subsections are about describing differences
between the kernel and (g)libc interfaces.
Reported-by: Andries E. Brouwer <Andries.Brouwer@cwi.nl>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-05-08 13:10:04 +02:00
7e8924ba6a
poll.2: After POLLHUP, EOF will be seen only after all data has been consumed
...
Reported-by: Sam Varshavchik <mrsam@courier-mta.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-05-02 09:20:13 +02:00
b09322c487
poll.2: Make it clearer which bits are ignored in 'events'
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-05-02 09:14:51 +02:00
74083180e3
poll.2: Clarify that signal mask treatment in ppoll() is per-thread
...
s/sigprocmask()/pthread_sigmask()/
Reported-by: Ian Pilcher <arequipeno@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-05-02 09:02:12 +02:00
c73595c249
getent.1, fallocate.2, getrlimit.2, llseek.2, madvise.2, mount.2, poll.2, posix_fadvise.2, pread.2, stat.2, symlink.2, timer_create.2, timerfd_create.2, unshare.2, acos.3, acosh.3, asin.3, asinh.3, asprintf.3, atan.3, atan2.3, atanh.3, cabs.3, cacos.3, cacosh.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cimag.3, clog.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, erf.3, erfc.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, floor.3, fma.3, fmax.3, fmin.3, fmod.3, frexp.3, ftw.3, get_nprocs_conf.3, getcwd.3, gethostbyname.3, getnetent.3, getutent.3, glob.3, ilogb.3, insque.3, j0.3, ldexp.3, lgamma.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lseek64.3, malloc.3, mbsnrtowcs.3, mbsrtowcs.3, modf.3, mq_notify.3, mq_open.3, nan.3, nextafter.3, openpty.3, perror.3, posix_memalign.3, pow.3, printf.3, qsort.3, realpath.3, remainder.3, remquo.3, rint.3, round.3, scalbln.3, scandir.3, scanf.3, setnetgrent.3, significand.3, sin.3, sinh.3, sqrt.3, strcasecmp.3, tan.3, tanh.3, tgamma.3, trunc.3, unlocked_stdio.3, updwtmp.3, wcrtomb.3, wcsnrtombs.3, wcsrtombs.3, wordexp.3, wprintf.3, y0.3, epoll.7, icmp.7, nptl.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-04-19 11:20:58 +02:00
9755c034f7
poll.2: SEE ALSO: add epoll(7)
...
Reported-by: Andreas Baak <andreas.baak@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-04-18 13:20:39 +02:00
62c76ace78
memusage.1, memusagestat.1, connect.2, fcntl.2, poll.2, errno.3, rtnetlink.3, inotify.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-09-07 05:03:19 -07:00
d2e7d1bb58
poll.2, select.2: fix erroneous description of "available for write".
...
POSIX says: "POLLOUT Normal data may be written without
blocking.". This is "may" is misleading, see the POSIX
write page:
Write requests to a pipe or FIFO shall be handled in the
same way as a regular file with the following exceptions:
...
If the O_NONBLOCK flag is clear, a write request may cause
the thread to block, but on normal completion it shall
return nbyte.
...
When attempting to write to a file descriptor (other than a
pipe or FIFO) that supports non-blocking writes and cannot
accept the data immediately:
If the O_NONBLOCK flag is clear, write() shall block the
calling thread until the data can be accepted.
If the O_NONBLOCK flag is set, write() shall not block the
thread. If some data can be written without blocking the
thread, write() shall write what it can and return the
number of bytes written. Otherwise, it shall return -1 and
set errno to [EAGAIN].
The net result is that write() of more than 1 byte on a
socket, pipe or FIFO which is "ready" may block: write()
(unlike read!) will attempt to write the entire buffer and
only return a short write under exceptional circumstances.
Indeed, this is the behaviour we see in Linux:
897626152dhttps://plus.google.com/103188246877163594460/posts/BkTGTMHDFgZ
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-09-01 19:36:03 +02:00
361ec6881d
poll.2: Describe fifth argument (sigsetsize) of raw ppoll() system call
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-18 17:01:47 -05:00
360b1b71de
poll.2: NOTES: add "C library/kernel ABI differences" subheading
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-18 17:01:47 -05:00
c77eace5b1
iconv.1, ldd.1, connect.2, dup.2, epoll_ctl.2, eventfd.2, fallocate.2, fcntl.2, getitimer.2, inotify_add_watch.2, open.2, pipe.2, poll.2, sendmmsg.2, set_tid_address.2, shmop.2, signalfd.2, splice.2, syscalls.2, syslog.2, tee.2, vmsplice.2, ether_aton.3, mallopt.3, printf.3, profil.3, charmap.5, proc.5, epoll.7, inotify.7, libc.7, pipe.7, sched.7, socket.7, udplite.7, iconvconfig.8, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-07-08 16:14:48 +02:00
e2cfd90e5b
poll.2: The negate-fd-to-ignore technique does not work for file descriptor 0
...
See https://bugzilla.kernel.org/show_bug.cgi?id=79411
Reported-by: Nadav Har'El <nyh@math.technion.ac.il>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-07-03 08:17:14 +02:00
726663fd9d
bind.2, connect.2, create_module.2, delete_module.2, execve.2, get_robust_list.2, getpriority.2, getrusage.2, init_module.2, link.2, listen.2, mbind.2, open.2, poll.2, query_module.2, readlink.2, recv.2, remap_file_pages.2, sched_setaffinity.2, semop.2, send.2, stat.2, stime.2, syscall.2, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, remquo.3, rtime.3, sched_getcpu.3, stpcpy.3, stpncpy.3, strcasecmp.3, system.3, fd.4, proc.5, ip.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-05-08 11:31:12 +02:00
da30ae718f
poll.2: Add <signal.h> to synopsis for ppoll()
...
One needs to #include <signal.h> to get the definition of the
type (sigset_t) of the mask argument to ppoll().
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-05-08 11:26:55 +02:00
216b9e6182
poll.2: spfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-03-16 11:36:57 +01:00
40df3d0039
epoll_wait.2, poll.2, select.2: Go into more detail on timeout and when call will cease blocking
...
Reported-by: Network Nut <sillystack@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-01-31 07:47:22 +01:00
210cded680
poll.2: Clarify meaning of events==0
...
events==0 does not mean that revents is always returned as
zero. The "output only" events (POLLHUP, POLLERR, POLLNVAL)
can still be returned.
See https://bugzilla.kernel.org/show_bug.cgi?id=61911
Reported-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-11-08 07:13:19 +13:00
0d9101c438
poll.2: Clarify wording of 'timeout' as a "minimum" interval
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-09-04 10:39:34 +02:00
d806bc0518
clock_nanosleep.2, futex.2, nanosleep.2, poll.2, sigaction.2, sigreturn.2, signal.7: SEE ALSO: add restart_syscall(2)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-07-30 05:21:20 +02:00
930152530c
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:10 +01:00
4b72fb6462
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:09 +01:00
dac8367047
_exit.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clone.2, close.2, connect.2, dup.2, execve.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futimesat.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, idle.2, ioperm.2, iopl.2, ipc.2, kexec_load.2, kill.2, link.2, linkat.2, lookup_dcookie.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mq_getsetattr.2, mremap.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, perf_event_open.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, ptrace.2, read.2, readahead.2, readlinkat.2, rename.2, renameat.2, rmdir.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, setresuid.2, setup.2, socketcall.2, splice.2, stat.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, tee.2, time.2, times.2, tkill.2, umask.2, umount.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, utime.2, utimensat.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, ether_aton.3, euidaccess.3, fexecve.3, ftime.3, futimes.3, getdirentries.3, getdtablesize.3, gethostid.3, getlogin.3, getpt.3, grantpt.3, hsearch.3, inet.3, lsearch.3, mkfifo.3, mkfifoat.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, posix_openpt.3, profil.3, ptsname.3, scandirat.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, shm_open.3, stpcpy.3, termios.3, toascii.3, tsearch.3, ulimit.3, undocumented.3, unlockpt.3, pts.4, charmap.5, locale.5, services.5, feature_test_macros.7, inotify.7, mq_overview.7, pipe.7, pty.7, sem_overview.7, shm_overview.7, unicode.7, utf-8.7: Global fix: remove "Hey Emacs" comment in page source
...
Only certain pages have this; there is no consistency, so
remove it from all pages
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:08 +01:00
47297adb6e
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 19:01:36 +01:00
c634028ab5
intro.1, time.1, _syscall.2, accept.2, brk.2, capget.2, faccessat.2, futimesat.2, gethostname.2, intro.2, ioprio_set.2, kill.2, madvise.2, mlock.2, mount.2, msgget.2, perf_event_open.2, poll.2, readv.2, sched_rr_get_interval.2, sched_setscheduler.2, select.2, select_tut.2, shmget.2, stat.2, timer_create.2, ustat.2, vfork.2, wait.2, alloca.3, atexit.3, catopen.3, crypt.3, dbopen.3, fenv.3, fopen.3, getaddrinfo_a.3, gethostbyname.3, getutent.3, intro.3, login.3, mallopt.3, queue.3, regex.3, sigpause.3, sigsetops.3, stdio.3, strftime.3, strptime.3, sysconf.3, ttyslot.3, undocumented.3, cciss.4, console_codes.4, hpsa.4, initrd.4, intro.4, rtc.4, st.4, tty_ioctl.4, wavelan.4, acct.5, charmap.5, dir_colors.5, hosts.5, intro.5, termcap.5, utmp.5, intro.6, armscii-8.7, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, ddp.7, epoll.7, glob.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man-pages.7, man.7, math_error.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, pthreads.7, raw.7, rtnetlink.7, signal.7, socket.7, spufs.7, svipc.7, tcp.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, intro.8: Global fix: use consistent capitalization in .SS headings
...
Capitalization in .SS sections across pages (and sometimes even
within a single page) is wildly inconsistent. Make it consistent.
Capitalize first word in heading, but otherwise use lower case,
except where English usage (e.g., proper nouns) or programming
language requirements (e.g., identifier names) dictate otherwise.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 15:08:38 +01:00
f33050d604
poll.2: Add pointer to select(2) for discussion of close in another thread
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-08-17 08:36:48 +02:00
01d8b73f92
poll.2: tfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-10 18:07:47 +12:00
6f0b2c8c9a
poll.2: Clarify discussion of wrapper function emulation
...
Clarify that glibc (as well as old libc) provides emulation
using select(2) on older kernels that don't have a poll()
system call.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:16 +12:00
77e74cf141
poll.2: Make the meaning of a zero timeout explicit
...
Clarify that timeout==0 causes an immediate return, even if
no file descriptors are ready.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:14 +12:00
19257d8fe6
poll.2: Clarify that 'timeout' is a *minimum* interval
...
Make it clear that 'timeout' is a minimum interval; the actual
interval will be rounded up to the system clock granularity,
and may overrun because of kernel scheduling delays.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:14 +12:00
b857fda584
poll.2: Document semantics of passing zero in 'events' field
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-04-16 08:27:09 +12:00
096ca08af4
poll.2: Document negative value in 'fd' field
...
Reported-by: Michael Welsh Duggan <mwd@cert.org>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-04-16 08:27:09 +12:00
c3074d7061
fallocate.2, kexec_load.2, poll.2, spu_run.2, atan2.3, cbrt.3, clock_getcpuclockid.3, end.3, frexp.3, getgrouplist.3, getifaddrs.3, matherr.3, modf.3, pow.3, pthread_getattr_np.3, pthread_getcpuclockid.3, sched_getcpu.3, tgamma.3, mouse.4, proc.5, feature_test_macros.7, spufs.7: Global fix: properly escape minus sign
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2011-09-16 07:00:48 +02:00
79fd50e603
poll.2: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2011-09-16 07:00:44 +02:00
cc12d0c5c8
poll.2: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2011-09-16 07:00:44 +02:00
39c05c26b1
poll.2: ffix
2011-09-16 07:00:44 +02:00
0a4f8b7bb4
getresuid.2, intro.2, mremap.2, open.2, poll.2, posix_fadvise.2, pread.2, remap_file_pages.2, setresuid.2, signal.2, splice.2, sync_file_range.2, tee.2, vmsplice.2, INFINITY.3, asprintf.3, assert_perror.3, basename.3, bsd_signal.3, canonicalize_file_name.3, clog10.3, crypt.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, encrypt.3, exp10.3, fcloseall.3, fenv.3, ffs.3, fmemopen.3, fopencookie.3, ftw.3, getdate.3, getline.3, getloadavg.3, getopt.3, getsubopt.3, getutent.3, grantpt.3, hsearch.3, intro.3, lseek64.3, memmem.3, mempcpy.3, mq_receive.3, mq_send.3, posix_fallocate.3, pow10.3, program_invocation_name.3, ptsname.3, putgrent.3, readdir.3, sigset.3, sincos.3, stpcpy.3, stpncpy.3, strchr.3, strfry.3, strnlen.3, strptime.3, strsignal.3, strstr.3, strverscmp.3, swab.3, sysv_signal.3, tsearch.3, unlocked_stdio.3, unlockpt.3, wcpcpy.3, wcpncpy.3, wcsdup.3, wcwidth.3: SEE ALSO: Remove redundant reference to feature_test_macros(7)
...
Reported-by: Florian Lehmann <flo.lehmann@googlemail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-10-31 06:06:58 +01:00
b80f966bb0
getresuid.2, mremap.2, poll.2, remap_file_pages.2, setresuid.2, splice.2, sync_file_range.2, syscall.2, tee.2, vmsplice.2, INFINITY.3, aio_init.3, asprintf.3, assert_perror.3, basename.3, bsd_signal.3, canonicalize_file_name.3, clog10.3, crypt.3, dl_iterate_phdr.3, dlopen.3, encrypt.3, exp10.3, fcloseall.3, fenv.3, fopencookie.3, ftw.3, getaddrinfo_a.3, getloadavg.3, getutent.3, grantpt.3, hsearch.3, lseek64.3, memmem.3, mempcpy.3, pow10.3, program_invocation_name.3, ptsname.3, putgrent.3, sched_getcpu.3, sincos.3, strchr.3, strfry.3, strnlen.3, strptime.3, strstr.3, strverscmp.3, swab.3, sysv_signal.3, tsearch.3, unlockpt.3, wcwidth.3: Add reference to feature_test_macros(7)
...
Some pages simply list feature test macro requirements in
the form:
#define #GNU_SOURCE
#include <someheader.h>
For these pages, add a "See feature_test_macros(7)" comment
on the "#define" line.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-10-31 05:31:47 +01:00
b218b02329
open.2, poll.2, select_tut.2, getpt.3, openpty.3, posix_openpt.3, ptsname.3, unlockpt.3, pts.4, tty_ioctl.4, proc.5, pty.7: spfix: s/psuedoterminal/psuedoterminal/g
...
Reported-by: Denis Barbier <bouzim@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-10-13 05:32:15 +02:00
662b2137e8
open.2, poll.2, select_tut.2, getpt.3, grantpt.3, openpty.3, posix_openpt.3, ptsname.3, unlockpt.3, pts.4, tty_ioctl.4, proc.5, pty.7: Global fix: s/pseudo-terminal/pseudoterminal/
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-10-12 06:51:51 +02:00
50831f9b8a
_exit.2, brk.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, getdtablesize.2, gethostname.2, getpagesize.2, getsid.2, killpg.2, mknod.2, mknodat.2, poll.2, posix_fadvise.2, pread.2, readlink.2, setpgid.2, setreuid.2, sigaltstack.2, stat.2, symlink.2, sync.2, truncate.2, vfork.2, wait.2, wait4.2, a64l.3, abs.3, acos.3, acosh.3, asin.3, asinh.3, atan.3, atan2.3, atoi.3, cbrt.3, ceil.3, copysign.3, cosh.3, dirfd.3, div.3, ecvt.3, erf.3, erfc.3, exp.3, exp2.3, fabs.3, fdim.3, ffs.3, floor.3, fma.3, fmax.3, fmin.3, fmod.3, fpclassify.3, frexp.3, ftw.3, fwide.3, gcvt.3, getcwd.3, getdate.3, getgrent.3, gethostid.3, getpass.3, getpwent.3, getsubopt.3, getw.3, hypot.3, ilogb.3, index.3, isalpha.3, isgreater.3, iswblank.3, j0.3, ldexp.3, lockf.3, log.3, log10.3, log1p.3, logb.3, lrint.3, lround.3, mkstemp.3, mktemp.3, modf.3, mq_receive.3, mq_send.3, nan.3, nextafter.3, posix_fallocate.3, posix_memalign.3, printf.3, qecvt.3, random.3, realpath.3, remainder.3, remquo.3, rint.3, round.3, scalb.3, scalbln.3, scanf.3, siginterrupt.3, signbit.3, sigset.3, sinh.3, sqrt.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strfry.3, strpbrk.3, strsep.3, strspn.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, strxfrm.3, tanh.3, tgamma.3, trunc.3, ttyslot.3, ualarm.3, usleep.3, wprintf.3, armscii-8.7, cp1251.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-3.7, iso_8859-5.7, iso_8859-6.7, iso_8859-8.7, koi8-u.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-09-22 16:59:09 +02:00
e417acb023
fcntl.2, intro.2, open.2, poll.2, ftw.3, intro.3, matherr.3, system.3, tmpnam.3, unix.7: Note that feature test macros must be defined before *any* includes
...
Programmers often make the mistake of including a feature test
macro only after having already included some header files.
This patch adds some text at opportune places to remind
programmers to do things the right way.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-09-10 06:33:31 +02:00
ba2e3e9a04
poll.2: tfix
...
Reported-by: Denis Barbier <bouzim@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-07-02 07:12:35 +02:00
Nicolas B