1d767b552e
getent.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, mtrace.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, add_key.2, adjtimex.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, bpf.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, close_range.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fanotify_init.2, fanotify_mark.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_rm_watch.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_console.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_fslabel.2, ioctl_getfsmap.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, open_by_handle_at.2, openat2.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pidfd_getfd.2, pidfd_open.2, pidfd_send_signal.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, restart_syscall.2, rmdir.2, rt_sigqueueinfo.2, s390_guarded_storage.2, s390_pci_mmio_write.2, s390_runtime_instr.2, s390_sthyi.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, stime.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscall.2, syscalls.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, circleq.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, fileno.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fopencookie.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getutmp.3, getw.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, list.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setsigmask_np.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_mutex_consistent.3, pthread_mutexattr_getpshared.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, readdir_r.3, realpath.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, slist.3, sockatmark.3, sqrt.3, stailq.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tailq.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console_codes.4, dsp56k.4, hpsa.4, initrd.4, loop.4, lp.4, msr.4, random.4, rtc.4, smartpqi.4, veth.4, wavelan.4, acct.5, core.5, elf.5, hosts.5, locale.5, proc.5, resolv.conf.5, rpc.5, slabinfo.5, sysfs.5, tmpfs.5, utmp.5, address_families.7, aio.7, attributes.7, bootparam.7, capabilities.7, cgroups.7, complex.7, ddp.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, hier.7, inode.7, inotify.7, ip.7, ipv6.7, keyrings.7, locale.7, man-pages.7, man.7, math_error.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, numa.7, packet.7, pkeys.7, pthreads.7, queue.7, raw.7, rtnetlink.7, sched.7, session-keyring.7, shm_overview.7, sigevent.7, signal-safety.7, signal.7, sock_diag.7, socket.7, spufs.7, symlink.7, system_data_types.7, tcp.7, time_namespaces.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, user_namespaces.7, vdso.7, vsock.7, x25.7, iconvconfig.8, ld.so.8, ldconfig.8, sln.8, tzselect.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-03-22 00:15:34 +01:00
d064d41a4b
Various pages: Inside code blocks (.EX/.EE) use \- to get real minus signs
...
A real minus can be cut and pasted...
THere are a few exceptions that gave been excluded in the this
change. For example, where there' is a string such as "<p1-name>",
where p1-name is soome sort of pseudo-identifier.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-21 10:29:14 +01:00
15d6565317
Various pages: bring more whitespace consistency in SYNOPSIS
...
The use of vertical white space in the SYNOPSIS sections
is rather inconsistent. Make it more consistent, subject to the
following heuristics:
* Prefer no blank lines between function signatures by default.
* Where many functions are defined in the SYNOPSIS, add blank
lines where needed to improve readability, possibly by using
blank lines to separate logical groups of functions.
Reported-by: Alejandro Colomar (man-pages) <alx.manpages@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-01 12:40:22 +01:00
46b20ca1bb
ioctl_ns.2, keyctl.2, memfd_create.2, pidfd_send_signal.2, poll.2, seccomp.2, signalfd.2, timerfd_create.2, unshare.2, dlinfo.3, duplocale.3, fopencookie.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, insque.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_create.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, qsort.3, sem_wait.3, core.5, elf.5, aio.7, epoll.7, pkeys.7, system_data_types.7, unix.7: Use periods more consistently inside code comments
...
In general, complete sentences in free-standing comments
should be terminated by periods.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-12-27 12:32:44 +01:00
fbd150d909
timerfd_create.2: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-09-11 11:33:28 +02:00
86d90299ae
timerfd_create.2: Use 'PRIxN' macros when printing C99 fixed-width integer types
...
Signed-off-by: Alejandro Colomar <colomar.6.4.3@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-09-11 11:33:28 +02:00
ed6c69cab9
intro.1, clock_getres.2, execve.2, fcntl.2, iopl.2, lseek.2, mknod.2, mmap.2, mount.2, mq_getsetattr.2, pidfd_open.2, prctl.2, setns.2, sgetmask.2, sigaction.2, stat.2, statx.2, sync.2, syscalls.2, syslog.2, timerfd_create.2, umask.2, a64l.3, aio_init.3, atoi.3, dladdr.3, fread.3, getpt.3, isfdtype.3, malloc_stats.3, malloc_trim.3, mkfifo.3, mq_close.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, posix_memalign.3, posix_openpt.3, pthread_atfork.3, pthread_rwlockattr_setkind_np.3, regex.3, scanf.3, sem_close.3, sem_destroy.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sigset.3, sigvec.3, strftime.3, termios.3, console_codes.4, dsp56k.4, fd.4, lp.4, mouse.4, pts.4, sk98lin.4, dir_colors.5, proc.5, resolv.conf.5, termcap.5, utmp.5, aio.7, armscii-8.7, arp.7, capabilities.7, cgroups.7, charsets.7, cp1251.7, cp1252.7, environ.7, glob.7, inode.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, keyrings.7, koi8-r.7, koi8-u.7, mailaddr.7, man-pages.7, netdevice.7, operator.7, persistent-keyring.7, process-keyring.7, pthreads.7, pty.7, raw.7, regex.7, session-keyring.7, shm_overview.7, signal.7, socket.7, suffixes.7, thread-keyring.7, unicode.7, units.7, uri.7, user-keyring.7, user-session-keyring.7, iconvconfig.8, ld.so.8, zic.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-08-13 10:01:14 +02:00
9ca13180d5
pldd.1, bpf.2, execve.2, futex.2, ioctl_fat.2, ioctl_tty.2, keyctl.2, signalfd.2, timerfd_create.2, __ppc_get_timebase.3, a64l.3, frexp.3, pthread_setname_np.3, regex.3, rpmatch.3, scanf.3, strfmon.3, strftime.3, termios.3, console_codes.4, vcs.4, veth.4, core.5, dir_colors.5, termcap.5, ascii.7, charsets.7, glob.7, man-pages.7, operator.7, regex.7, user_namespaces.7, zic.8: Use "\(ha" rather than "^" in code
...
This renders better in PDF.
Reported-by: Geoff Clare <gwc@opengroup.org>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-08-09 10:22:22 +02:00
98f89c711b
timer_create.2, timerfd_create.2: tfix
...
Reported-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-06-12 21:44:55 +02:00
ac6dcc4865
timerfd_create.2: tfix
...
Reported-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-06-12 21:44:23 +02:00
a14af333d6
Various pages: retitle EXAMPLE section heading to EXAMPLES
...
EXAMPLES appears to be the wider majority usage across various
projects' manual pages, and is also what is used in the POSIX
manual pages.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-05-31 10:45:27 +02:00
e8426ca2b4
getent.1, localedef.1, accept.2, arch_prctl.2, clock_getres.2, clock_nanosleep.2, connect.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, execve.2, getitimer.2, getsockopt.2, gettid.2, inotify_add_watch.2, inotify_init.2, io_submit.2, ioctl.2, lseek.2, madvise.2, mlock.2, mmap.2, mprotect.2, msgctl.2, msgop.2, open_by_handle_at.2, openat2.2, pidfd_open.2, poll.2, prctl.2, quotactl.2, s390_sthyi.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, setns.2, shmctl.2, shmget.2, shmop.2, sigaction.2, stat.2, statx.2, syscalls.2, timer_create.2, timerfd_create.2, unshare.2, wait.2, CPU_SET.3, aio_init.3, atoi.3, des_crypt.3, dirfd.3, fmemopen.3, fopencookie.3, ftok.3, fts.3, getaddrinfo.3, getifaddrs.3, getrpcent.3, gsignal.3, lio_listio.3, nl_langinfo.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, scanf.3, sem_init.3, sem_post.3, shm_open.3, strcmp.3, strftime.3, st.4, elf.5, group.5, proc.5, services.5, aio.7, cgroups.7, feature_test_macros.7, keyrings.7, man-pages.7, namespaces.7, path_resolution.7, sigevent.7, signal.7, socket.7, sysvipc.7, time.7, udp.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-11 22:07:24 +02:00
ff5de6ecc4
timerfd_create.2: Refer reader to clock_getres(2) for further details on the clocks
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-06 10:24:47 +02:00
0f1553b5fd
timerfd_create.2: Note a case where timterfd_settime() can fail with ECANCELED
...
From email discussions with Thomas Gleixner:
======
Hello Thomas, et al,
Following on from our discussion of read() on a timerfd [1], I
happened to remember a Debian bug report [2] that points out that
timer_settime() can fail with the error ECANCELED, which is both
surprising and odd (because despite the error, the timer does get
updated).
The relevant kernel code (I think, from your commit [3]) seems to be
the following in timerfd_setup():
if (texp != 0) {
if (flags & TFD_TIMER_ABSTIME)
texp = timens_ktime_to_host(clockid, texp);
if (isalarm(ctx)) {
if (flags & TFD_TIMER_ABSTIME)
alarm_start(&ctx->t.alarm, texp);
else
alarm_start_relative(&ctx->t.alarm, texp);
} else {
hrtimer_start(&ctx->t.tmr, texp, htmode);
}
if (timerfd_canceled(ctx))
return -ECANCELED;
}
Using a small test program [4] shows the behavior. The program loops,
repeatedly calling timerfd_settime() (with a delay of a few seconds
before each call). In another terminal window, enter the following
command a few times:
$ sudo date -s "5 seconds" # Add 5 secs to wall-clock time
I see behavior as follows (the /sudo date -s "5 seconds"/ command was
executed before loop iterations 0, 2, and 4):
[[
$ ./timerfd_settime_ECANCELED
0
Current time is 1585729978 secs, 868510078 nsecs
Timer value is now 0 secs, 0 nsecs
timerfd_settime() succeeded
Timer value is now 9 secs, 999991977 nsecs
1
Current time is 1585729982 secs, 716339545 nsecs
Timer value is now 6 secs, 152167990 nsecs
timerfd_settime() succeeded
Timer value is now 9 secs, 999992940 nsecs
2
Current time is 1585729991 secs, 567377831 nsecs
Timer value is now 1 secs, 148959376 nsecs
timerfd_settime: Operation canceled
Timer value is now 9 secs, 999976294 nsecs
3
Current time is 1585729995 secs, 405385503 nsecs
Timer value is now 6 secs, 161989917 nsecs
timerfd_settime() succeeded
Timer value is now 9 secs, 999993317 nsecs
4
Current time is 1585730004 secs, 225036165 nsecs
Timer value is now 1 secs, 180346909 nsecs
timerfd_settime: Operation canceled
Timer value is now 9 secs, 999984345 nsecs
]]
I note from the above.
(1) If the wall-clock is changed before the first timerfd_settime()
call, the call succeeds. This is of course expected.
(2) If the wall-clock is changed after a timerfd_settime() call, then
the next timerfd_settime() call fails with ECANCELED.
(3) Even if the timerfd_settime() call fails, the timer is still updated(!).
Some questions:
(a) What is the rationale for timerfd_settime() failing with ECANCELED
in this case? (Currently, the manual page says nothing about this.)
(b) It seems at the least surprising, but more likely a bug, that
timerfd_settime() fails with ECANCELED while at the same time
successfully updating the timer value.
Your thoughts?
Thanks,
Michael
[1] https://lore.kernel.org/lkml/3cbd0919-c82a-cb21-c10f-0498433ba5d1@gmail.com/
[2] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=947091
[3]
commit 99ee5315dac6211e972fa3f23bcc9a0343ff58c4
Author: Thomas Gleixner <tglx@linutronix.de>
Date: Wed Apr 27 14:16:42 2011 +0200
timerfd: Allow timers to be cancelled when clock was set
[4]
/* timerfd_settime_ECANCELED.c */
#include <stdlib.h>
#include <unistd.h>
#include <stdio.h>
#include <inttypes.h>
#include <sys/timerfd.h>
#define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); } while (0)
int
main(int argc, char *argv[])
{
struct itimerspec ts, gts;
struct timespec start;
int tfd = timerfd_create(CLOCK_REALTIME, 0);
if (tfd == -1)
errExit("timerfd_create");
ts.it_interval.tv_sec = 0;
ts.it_interval.tv_nsec = 10;
int flags = TFD_TIMER_ABSTIME | TFD_TIMER_CANCEL_ON_SET;
for (long j ; ; j++) {
/* Inject a delay into each loop, by calling getppid()
many times */
for (int k = 0; k < 10000000; k++)
getppid();
if (j % 1 == 0)
printf("%ld\n", j);
/* Display the current wall-clock time */
if (clock_gettime(CLOCK_REALTIME, &start) == -1)
errExit("clock_gettime");
printf("Current time is %ld secs, %ld nsecs\n",
start.tv_sec, start.tv_nsec);
/* Before resetting the timer, retrieve its current value
so that after the timerfd_settime() call, we can see
whether the the value has changed */
if (timerfd_gettime(tfd, >s) == -1)
perror("timerfd_gettime");
printf("Timer value is now %ld secs, %ld nsecs\n",
gts.it_value.tv_sec, gts.it_value.tv_nsec);
/* Reset the timer to now + 10 secs */
ts.it_value.tv_sec = start.tv_sec + 10;
ts.it_value.tv_nsec = start.tv_nsec;
if (timerfd_settime(tfd, flags, &ts, NULL) == -1)
perror("timerfd_settime");
else
printf("timerfd_settime() succeeded\n");
/* Display the timer value once again */
if (timerfd_gettime(tfd, >s) == -1)
perror("timerfd_gettime");
printf("Timer value is now %ld secs, %ld nsecs\n",
gts.it_value.tv_sec, gts.it_value.tv_nsec);
printf("\n");
}
}
=======
Subject: Re: timer_settime() and ECANCELED
Date: Wed, 01 Apr 2020 19:42:42 +0200
From: Thomas Gleixner <tglx@linutronix.de>
Michael,
"Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> writes:
> Following on from our discussion of read() on a timerfd [1], I
> happened to remember a Debian bug report [2] that points out that
> timer_settime() can fail with the error ECANCELED, which is both
> surprising and odd (because despite the error, the timer does get
> updated).
...
> (1) If the wall-clock is changed before the first timerfd_settime()
> call, the call succeeds. This is of course expected.
> (2) If the wall-clock is changed after a timerfd_settime() call, then
> the next timerfd_settime() call fails with ECANCELED.
> (3) Even if the timerfd_settime() call fails, the timer is still updated(!).
>
> Some questions:
> (a) What is the rationale for timerfd_settime() failing with ECANCELED
> in this case? (Currently, the manual page says nothing about this.)
> (b) It seems at the least surprising, but more likely a bug, that
> timerfd_settime() fails with ECANCELED while at the same time
> successfully updating the timer value.
Really good question and TBH I can't remember why this is implemented in
the way it is, but I have a faint memory that at least (a) is
intentional.
After staring at the code for a while I came up with the following
answers:
(a): If the clock was set event ("date -s ...") which triggered the
cancel was not yet consumed by user space via read(), then that
information would get lost because arming the timer to the new
value has to reset the state.
(b): Arming the timer in that case is indeed very questionable, but it
could be argued that because the clock was set event happened with
the old expiry value that the new expiry value is not affected.
I'd be happy to change that and not arm the timer in the case of a
pending cancel, but I fear that some user space already depends on
that behaviour.
Thanks,
tglx
======
Subject: Re: timer_settime() and ECANCELED
Date: Thu, 02 Apr 2020 10:49:18 +0200
From: Thomas Gleixner <tglx@linutronix.de>
To: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>
"Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> writes:
> On 4/1/20 7:42 PM, Thomas Gleixner wrote:
>> (b): Arming the timer in that case is indeed very questionable, but it
>> could be argued that because the clock was set event happened with
>> the old expiry value that the new expiry value is not affected.
>>
>> I'd be happy to change that and not arm the timer in the case of a
>> pending cancel, but I fear that some user space already depends on
>> that behaviour.
>
> Yes, that's the risk, of course. So, shall we just document all
> this in the manual page?
I think so.
Thanks,
tglx
======
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-02 21:43:21 +02:00
96d951a401
clock_nanosleep.2, timer_create.2, timerfd_create.2: Add various missing errors
...
Mostly verified by testing and reading the code.
There is unfortunately quite a bit of inconsistency across API~s:
clock_gettime clock_settime clock_nanosleep timer_create timerfd_create
CLOCK_BOOTTIME y n (EINVAL) y y y
CLOCK_BOOTTIME_ALARM y n (EINVAL) y [1] y [1] y [1]
CLOCK_MONOTONIC y n (EINVAL) y y y
CLOCK_MONOTONIC_COARSE y n (EINVAL) n (ENOTSUP) n (ENOTSUP) n (EINVAL)
CLOCK_MONOTONIC_RAW y n (EINVAL) n (ENOTSUP) n (ENOTSUP) n (EINVAL)
CLOCK_REALTIME y y y y y
CLOCK_REALTIME_ALARM y n (EINVAL) y [1] y [1] y [1]
CLOCK_REALTIME_COARSE y n (EINVAL) n (ENOTSUP) n (ENOTSUP) n (EINVAL)
CLOCK_TAI y n (EINVAL) y y n (EINVAL)
CLOCK_PROCESS_CPUTIME_ID y n (EINVAL) y y n (EINVAL)
CLOCK_THREAD_CPUTIME_ID y n (EINVAL) n (EINVAL [2]) y n (EINVAL)
pthread_getcpuclockid() y n (EINVAL) y y n (EINVAL)
[1] The caller must have CAP_WAKE_ALARM, or the error EPERM results.
[2] This error is generated in the glibc wrapper.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-02 12:57:25 +02:00
04e2e313fc
timerfd_create.2: Rework text for EINVAL for invalid clock ID
...
The error description was crufty. There are more valid
clock IDs these days.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-02 12:57:25 +02:00
066dcd09cb
timerfd_create.2: wfix
...
See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=947091
Reported-by: Marc Lehmann <debian-reportbug@plan9.de>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-01 10:04:32 +02:00
1ae24555ba
timerfd_create.2: Negetive changes to CLOCK_REALTIME may cause read() to return 0
...
Devi R K reported this issue, and went on to note:
> We have written a program using real time clock and it has been raised to
> the community.
>
> https://lore.kernel.org/lkml/alpine.DEB.2.21.1908191943280.1796@nanos.tec.linutronix.de/T/
[...]
Thanks for pointing me at that thread. In particular, the test
program at
https://lore.kernel.org/lkml/alpine.DEB.2.21.1908191943280.1796@nanos.tec.linutronix.de/T/#m489d81abdfbb2699743e18c37657311f8d52a4cd
[...]
I think this patch does not really capture the details
properly. The immediately preceding paragraph says:
If the associated clock is either CLOCK_REALTIME or
CLOCK_REALTIME_ALARM, the timer is absolute
(TFD_TIMER_ABSTIME), and the flag TFD_TIMER_CANCEL_ON_SET
was specified when calling timerfd_settime(), then read(2)
fails with the error ECANCELED if the real-time clock
undergoes a discontinuous change. (This allows the reading
application to discover such discontinuous changes to the
clock.)
Following on from that, I think we should have a paragraph that says
something like:
If the associated clock is either CLOCK_REALTIME or
CLOCK_REALTIME_ALARM, the timer is absolute
(TFD_TIMER_ABSTIME), and the flag TFD_TIMER_CANCEL_ON_SET
was not specified when calling timerfd_settime(), then a
discontinuous negative change to the clock
(e.g., clock_settime(2)) may cause read(2) to unblock, but
return a value of 0 (i.e., no bytes read), if the clock
change occurs after the time expired, but before the
read(2) on the timerfd file descriptor.
This seems consistent with Thomas's observations in
https://lore.kernel.org/lkml/alpine.DEB.2.21.1908191943280.1796@nanos.tec.linutronix.de/T/#m49b78122b573a2749a05b720dc9fa036546db490
==
Thomas Gleixner replied:
Yes, that's correct. Accurate as always!
This is pretty much in line with clock_nanosleep(CLOCK_REALTIME,
TIMER_ABSTIME) which has a similar problem vs. observability in user
space.
clock_nanosleep(2) mutters:
"POSIX.1 specifies that after changing the value of the CLOCK_REALTIME
clock via clock_settime(2), the new clock value shall be used to
determine the time at which a thread blocked on an absolute
clock_nanosleep() will wake up; if the new clock value falls past the
end of the sleep interval, then the clock_nanosleep() call will return
immediately."
which can be interpreted as guarantee that clock_nanosleep() never
returns prematurely, i.e. the assert() in the below code would indicate
a kernel failure:
ret = clock_nanosleep(CLOCK_REALTIME, TIMER_ABSTIME, &expiry, NULL);
if (!ret) {
clock_gettime(CLOCK_REALTIME, &now);
assert(now >= expiry);
}
But that assert can trigger when CLOCK_REALTIME was modified after the
timer fired and the kernel decided to wake up the task and let it return
to user space.
clock_nanosleep(..., &expiry)
arm_timer(expires);
schedule();
-> timer interrupt
now = ktime_get_real();
if (expires <= now)
-------------------------------- After this point
wakeup(); clock_settime(2) or
adjtimex(2) which
makes CLOCK_REALTIME
jump back far enough will
cause the above assert
to trigger.
...
return from syscall (retval == 0)
There is no guarantee against clock_settime() coming after the
wakeup. Even if we put another check into the return to user path then
we won't catch a clock_settime() which comes right after that and before
user space invokes clock_gettime().
POSIX spec Issue 7 (2018 edition) says:
The suspension for the absolute clock_nanosleep() function (that is,
with the TIMER_ABSTIME flag set) shall be in effect at least until the
value of the corresponding clock reaches the absolute time specified by
rqtp.
And that's what the kernel implements for clock_nanosleep() and timerfd
behaves exactly the same way.
The wakeup of the waiter, i.e. task blocked in clock_nanosleep(2),
read(2), poll(2), is not happening _before_ the absolute time specified
is reached.
If clock_settime() happens right before the expiry check, then it does
the right thing, but any modification to the clock after the wakeup
cannot be mitigated. At least not in a way which would make the assert()
in the example code above a reliable indicator for a kernel fail.
That's the reason why I rejected the attempt to mitigate that particular
0 tick issue in timerfd as it would just scratch a particular itch but
still not provide any guarantee. So having the '0' return documented is
the right way to go.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: devi R.K <devi.feb27@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-03-30 22:52:58 +02:00
e5d8f6046b
timerfd_create.2: srcfix: remove obsolete FIXME
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-03-12 09:24:44 +01:00
9ba0180298
getent.1, iconv.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, pldd.1, sprof.1, time.1, _syscall.2, accept.2, add_key.2, adjtimex.2, bind.2, bpf.2, capget.2, chown.2, chroot.2, clock_getres.2, clone.2, connect.2, copy_file_range.2, epoll_ctl.2, epoll_wait.2, eventfd.2, fanotify_init.2, fanotify_mark.2, fcntl.2, fsync.2, futex.2, getcpu.2, getdents.2, getgid.2, getgroups.2, getpid.2, gettid.2, gettimeofday.2, getuid.2, getxattr.2, inotify_add_watch.2, inotify_init.2, ioctl_fat.2, ioctl_ns.2, ioctl_userfaultfd.2, ioprio_set.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, madvise.2, memfd_create.2, migrate_pages.2, mount.2, mprotect.2, mremap.2, msgctl.2, msgop.2, nfsservctl.2, open_by_handle_at.2, perf_event_open.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, readahead.2, readdir.2, readlink.2, reboot.2, recvmmsg.2, removexattr.2, rename.2, request_key.2, s390_guarded_storage.2, s390_runtime_instr.2, s390_sthyi.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, seccomp.2, select.2, select_tut.2, semctl.2, sendmmsg.2, set_thread_area.2, setgid.2, setns.2, setuid.2, setxattr.2, shmctl.2, sigaction.2, signalfd.2, sigsuspend.2, socket.2, socketpair.2, spu_run.2, stat.2, statx.2, subpage_prot.2, syscalls.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, vmsplice.2, write.2, CPU_SET.3, __ppc_get_timebase.3, alloca.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bsd_signal.3, bstring.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, cmsg.3, confstr.3, ctermid.3, ctime.3, des_crypt.3, dl_iterate_phdr.3, dlinfo.3, dlsym.3, duplocale.3, end.3, endian.3, errno.3, exec.3, exit.3, ferror.3, fgetws.3, fmemopen.3, fnmatch.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isatty.3, iswblank.3, iswspace.3, lockf.3, makecontext.3, mallinfo.3, malloc.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, putenv.3, qsort.3, rand.3, random.3, readdir.3, regex.3, resolver.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcmp.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, system.3, termios.3, trunc.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, xcrypt.3, console_codes.4, dsp56k.4, full.4, initrd.4, lirc.4, loop.4, st.4, tty.4, vcs.4, charmap.5, core.5, host.conf.5, locale.5, proc.5, repertoiremap.5, resolv.conf.5, termcap.5, tmpfs.5, tzfile.5, aio.7, capabilities.7, cgroup_namespaces.7, cgroups.7, charsets.7, complex.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, locale.7, man-pages.7, man.7, namespaces.7, pid_namespaces.7, pkeys.7, pthreads.7, rtld-audit.7, sched.7, signal.7, sock_diag.7, socket.7, tcp.7, udp.7, unicode.7, user_namespaces.7, utf-8.7, zdump.8, zic.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-03-06 15:12:10 +01:00
d1a719857b
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
...
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54 , the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 15:32:50 +01:00
6614e29264
keyctl.2, mlock.2, timerfd_create.2, write.2, nl_langinfo.3, posix_spawn.3: ffix
...
Reported-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 10:00:28 +01:00
7f11e32c39
accept.2, copy_file_range.2, eventfd.2, inotify_init.2, pipe.2, readahead.2, signalfd.2, socket.2, timerfd_create.2: Clarify the distinction between "file descriptor" and "file description"
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-12-01 09:42:01 +01:00
205b1bce43
timerfd_create.2: wfix
...
Reported-by: Daniel Kamil Kozar <dkk089@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-05-02 12:14:43 +02:00
251ebc1e3a
timerfd_create.2: wfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-11-09 09:34:30 +01:00
26cd31fd4a
access.2, delete_module.2, eventfd.2, fallocate.2, fcntl.2, getrandom.2, init_module.2, open.2, seccomp.2, timerfd_create.2, openpty.3, pthread_spin_lock.3, shm_open.3, tempnam.3, fifo.7, keyrings.7, pid_namespaces.7, sched.7, thread-keyring.7: wfix (will fail --> fail/fails)
...
Reported-by: Pedro Alves <palves@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-10-20 16:55:10 +02:00
4b8c67d976
iconv.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, mtrace.1, pldd.1, sprof.1, time.1, _syscall.2, add_key.2, alloc_hugepages.2, arch_prctl.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fallocate.2, fanotify_init.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_console.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_iflags.2, ioctl_list.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, open_by_handle_at.2, outb.2, perf_event_open.2, perfmonctl.2, personality.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, reboot.2, recv.2, recvmmsg.2, remap_file_pages.2, rename.2, request_key.2, restart_syscall.2, rt_sigqueueinfo.2, s390_pci_mmio_write.2, s390_runtime_instr.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscall.2, syscalls.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timer_create.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cfree.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, cmsg.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console_codes.4, dsp56k.4, fuse.4, hd.4, hpsa.4, initrd.4, intro.4, loop.4, random.4, rtc.4, sd.4, sk98lin.4, st.4, wavelan.4, acct.5, core.5, elf.5, filesystems.5, host.conf.5, hosts.5, locale.5, nologin.5, proc.5, resolv.conf.5, rpc.5, slabinfo.5, utmp.5, aio.7, arp.7, bootparam.7, capabilities.7, cgroup_namespaces.7, cgroups.7, charsets.7, cpuset.7, ddp.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, futex.7, inode.7, inotify.7, ip.7, ipv6.7, keyrings.7, locale.7, man-pages.7, man.7, math_error.7, mount_namespaces.7, mq_overview.7, namespaces.7, netdevice.7, netlink.7, packet.7, pipe.7, pkeys.7, pthreads.7, pty.7, raw.7, rtld-audit.7, rtnetlink.7, sched.7, session-keyring.7, signal.7, sock_diag.7, socket.7, spufs.7, suffixes.7, tcp.7, udp.7, udplite.7, unicode.7, units.7, unix.7, uri.7, user_namespaces.7, vdso.7, x25.7, xattr.7, iconvconfig.8, ld.so.8, ldconfig.8, sln.8: Update timestamps
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-09-15 12:44:56 +02:00
b8302363ed
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
...
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-19 13:47:27 +02:00
e646a1bad9
ioctl_console.2, ioctl_getfsmap.2, ioctl_iflags.2, ioctl_list.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, link.2, mmap.2, modify_ldt.2, msgctl.2, poll.2, query_module.2, quotactl.2, recv.2, recvmmsg.2, sched_setscheduler.2, seccomp.2, select.2, semctl.2, semop.2, send.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sysinfo.2, timer_create.2, timerfd_create.2, uname.2, unshare.2, userfaultfd.2, ustat.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, backtrace.3, bswap.3, btree.3, clock_getcpuclockid.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, fmemopen.3, fopencookie.3, frexp.3, fts.3, ftw.3, getaddrinfo.3, getaddrinfo_a.3, getcontext.3, getgrouplist.3, getifaddrs.3, getipnodebyname.3, getnameinfo.3, getopt.3, getprotoent_r.3, getpwent_r.3, getrpcent.3, getservent_r.3, getttyent.3, getumask.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, inet.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallopt.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mtrace.3, newlocale.3, ntp_gettime.3, offsetof.3, posix_openpt.3, printf.3, pthread_setname_np.3, pthread_setschedparam.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, sigvec.3, stdarg.3, strcat.3, strcpy.3, strftime.3, strtol.3, toupper.3, ttyslot.3, fuse.4, loop.4, st.4, elf.5, cgroup_namespaces.7, cgroups.7, feature_test_macros.7, inode.7, inotify.7, keyrings.7, man-pages.7, math_error.7, mount_namespaces.7, mq_overview.7, pthreads.7, sched.7, session-keyring.7, udplite.7, unix.7, vdso.7: Use consistent markup for code snippets
...
The preferred form is
.PP/.IP
.in +4n
.EX
<code>
.EE
.in
.PP/.IP
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-19 13:47:26 +02:00
e7d0bb4715
memusage.1, clone.2, eventfd.2, futex.2, getdents.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, keyctl.2, mmap.2, mprotect.2, msgop.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, setns.2, tee.2, timer_create.2, timerfd_create.2, unshare.2, userfaultfd.2, wait.2, __ppc_get_timebase.3, backtrace.3, bswap.3, clock_getcpuclockid.3, dl_iterate_phdr.3, dlinfo.3, dlopen.3, duplocale.3, end.3, endian.3, fmemopen.3, fopencookie.3, frexp.3, ftw.3, getdate.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, mq_getattr.3, mq_notify.3, newlocale.3, offsetof.3, posix_spawn.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, scandir.3, sem_wait.3, strcat.3, strftime.3, strtok.3, strtol.3, strverscmp.3, loop.4, core.5, aio.7, fanotify.7, feature_test_macros.7, inotify.7, pkeys.7, unix.7, user_namespaces.7: Use .EX/.EE for EXAMPLE programs
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 10:44:33 +02:00
efeece0465
_syscall.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fallocate.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ioprio_set.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open_by_handle_at.2, outb.2, perf_event_open.2, perfmonctl.2, personality.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, recvmmsg.2, remap_file_pages.2, rename.2, request_key.2, restart_syscall.2, rt_sigqueueinfo.2, s390_pci_mmio_write.2, s390_runtime_instr.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysinfo.2, syslog.2, tee.2, time.2, timer_create.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, utime.2, utimensat.2, vfork.2, vmsplice.2, wait.2, wait4.2, write.2: Formatting fix: replace blank lines with .PP/.IP
...
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 09:30:51 +02:00
68e4db0a44
_exit.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, create_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, exit_group.2, fanotify_mark.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, ioctl.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_tty.2, ioperm.2, iopl.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_mempolicy.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shutdown.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, sync.2, sysctl.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, difftime.3, dirfd.3, div.3, dlerror.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, erf.3, erfc.3, err.3, errno.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, infnan.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, newlocale.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, y0.3, dsp56k.4, random.4, rtc.4, st.4, ddp.7, ip.7, ipv6.7, packet.7, rtnetlink.7, socket.7, tcp.7, udp.7, udplite.7, x25.7: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 17:16:29 +02:00
35deeb8703
bind.2, chmod.2, chown.2, chroot.2, clock_getres.2, clone.2, connect.2, dup.2, fallocate.2, get_mempolicy.2, getpeername.2, getpriority.2, getsockname.2, getsockopt.2, gettimeofday.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, kill.2, mbind.2, mmap.2, mount.2, mprotect.2, nfsservctl.2, nice.2, open.2, perf_event_open.2, pipe.2, pkey_alloc.2, prctl.2, ptrace.2, quotactl.2, remap_file_pages.2, sched_setscheduler.2, set_mempolicy.2, signal.2, signalfd.2, swapon.2, sync_file_range.2, syscalls.2, timer_create.2, timerfd_create.2, utime.2, utimensat.2, wait.2, atof.3, ctime.3, errno.3, fclose.3, fflush.3, insque.3, malloc_get_state.3, mallopt.3, mbsnrtowcs.3, mq_close.3, mq_open.3, mq_receive.3, mq_send.3, printf.3, pthread_attr_init.3, pthread_create.3, pthread_setaffinity_np.3, ptsname.3, remainder.3, strtod.3, tgamma.3, timegm.3, tmpnam.3, ttyname.3, console_ioctl.4, elf.5, filesystems.5, proc.5, utmp.5, capabilities.7, cgroups.7, credentials.7, ddp.7, feature_test_macros.7, fifo.7, inotify.7, libc.7, mount_namespaces.7, namespaces.7, netlink.7, pid_namespaces.7, pkeys.7, shm_overview.7, standards.7, uri.7, user_namespaces.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-12-12 10:45:24 +01:00
e9477548b0
timerfd_create.2: Document TFD_TIMER_CANCEL_ON_SET
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-11-21 23:34:38 +01:00
510625764c
timerfd_create.2: Rework discussion on relative and absolute timers
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-11-21 23:34:38 +01:00
4c7471193b
timerfd_create.2: Document CLOCK_BOOTTIME, CLOCK_REALTIME_ALARM, and CLOCK_BOOTTIME_ALARM
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-11-21 23:34:38 +01:00
4b76fffb6a
timerfd_create.2: Rework description of clocks as a hanging list
...
Done in part as preparation for following patches.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-11-21 23:34:22 +01:00
cda56b8eed
timerfd_create.2: srcfix: FIXME tidy-up
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-10-29 13:34:57 +02:00
29b41e747f
accept.2, acct.2, bind.2, clock_getres.2, connect.2, dup.2, epoll_create.2, eventfd.2, execve.2, fanotify_init.2, fcntl.2, fork.2, futex.2, get_robust_list.2, getcpu.2, getpeername.2, getrlimit.2, getsockname.2, getsockopt.2, gettimeofday.2, inotify_init.2, listen.2, membarrier.2, memfd_create.2, mlock.2, mmap.2, personality.2, pipe.2, poll.2, recv.2, send.2, sendfile.2, shmget.2, shutdown.2, sigreturn.2, socket.2, socketcall.2, socketpair.2, spu_create.2, swapon.2, time.2, timerfd_create.2, uselib.2, dlerror.3, dlopen.3, drand48.3, errno.3, fnmatch.3, getgrent.3, getgrnam.3, getlogin.3, getpwent.3, getpwnam.3, iconv.3, mq_open.3, opendir.3, random_r.3, sem_open.3, shm_open.3, tmpfile.3, tzset.3, random.4, fanotify.7, futex.7, vdso.7, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-29 13:48:42 +01:00
26c32fabec
accept.2, dup.2, eventfd.2, execve.2, fcntl.2, memfd_create.2, open.2, perf_event_open.2, pipe.2, signalfd.2, socket.2, socketpair.2, spu_create.2, timerfd_create.2, getgrent.3, getgrnam.3, getlogin.3, getpwent.3, getpwnam.3, mq_open.3, opendir.3, sem_open.3, shm_open.3, tmpfile.3: ERRORS: standardize text for EMFILE error
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-27 16:37:03 +01:00
c73595c249
getent.1, fallocate.2, getrlimit.2, llseek.2, madvise.2, mount.2, poll.2, posix_fadvise.2, pread.2, stat.2, symlink.2, timer_create.2, timerfd_create.2, unshare.2, acos.3, acosh.3, asin.3, asinh.3, asprintf.3, atan.3, atan2.3, atanh.3, cabs.3, cacos.3, cacosh.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cimag.3, clog.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, erf.3, erfc.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, floor.3, fma.3, fmax.3, fmin.3, fmod.3, frexp.3, ftw.3, get_nprocs_conf.3, getcwd.3, gethostbyname.3, getnetent.3, getutent.3, glob.3, ilogb.3, insque.3, j0.3, ldexp.3, lgamma.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lseek64.3, malloc.3, mbsnrtowcs.3, mbsrtowcs.3, modf.3, mq_notify.3, mq_open.3, nan.3, nextafter.3, openpty.3, perror.3, posix_memalign.3, pow.3, printf.3, qsort.3, realpath.3, remainder.3, remquo.3, rint.3, round.3, scalbln.3, scandir.3, scanf.3, setnetgrent.3, significand.3, sin.3, sinh.3, sqrt.3, strcasecmp.3, tan.3, tanh.3, tgamma.3, trunc.3, unlocked_stdio.3, updwtmp.3, wcrtomb.3, wcsnrtombs.3, wcsrtombs.3, wordexp.3, wprintf.3, y0.3, epoll.7, icmp.7, nptl.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-04-19 11:20:58 +02:00
40f6b649da
timerfd_create.2: Note kernel version for TFD_IOC_SET_TICKS
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-04-18 13:20:39 +02:00
80d27367ab
timerfd_create.2: Tweaks to Cyrill Gorcunov's patch
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-04-18 13:20:39 +02:00
5a3eb9cd35
timerfd_create.2: Document TFD_IOC_SET_TICKS ioctl() operation
...
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-04-18 13:20:39 +02:00
e125c3e172
timerfd_create.2: srcfix: added FIXME
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-11-10 11:56:49 +01:00
bea08fec7e
adjtimex.2, bind.2, cacheflush.2, clone.2, fallocate.2, fanotify_init.2, fanotify_mark.2, flock.2, futex.2, getdents.2, getpriority.2, getrlimit.2, gettid.2, gettimeofday.2, ioprio_set.2, kexec_load.2, migrate_pages.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, msgop.2, nfsservctl.2, perf_event_open.2, pread.2, ptrace.2, recvmmsg.2, rename.2, restart_syscall.2, sched_setattr.2, send.2, shmop.2, shutdown.2, sigaction.2, signalfd.2, syscalls.2, timer_create.2, timerfd_create.2, tkill.2, vmsplice.2, wait.2, aio_init.3, confstr.3, exit.3, fmemopen.3, fopen.3, getaddrinfo.3, getauxval.3, getspnam.3, isalpha.3, isatty.3, mallinfo.3, malloc.3, mallopt.3, psignal.3, pthread_attr_setinheritsched.3, qecvt.3, queue.3, rtnetlink.3, strerror.3, strftime.3, toupper.3, towlower.3, towupper.3, initrd.4, locale.5, proc.5, bootparam.7, capabilities.7, ddp.7, fanotify.7, icmp.7, inotify.7, ip.7, ipv6.7, netdevice.7, netlink.7, path_resolution.7, rtld-audit.7, rtnetlink.7, sched.7, signal.7, socket.7, svipc.7, tcp.7, unix.7, ld.so.8: srcfix: Update FIXMEs
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-21 16:47:44 -05:00
88879aebdd
eventfd.2, set_mempolicy.2, timerfd_create.2, fwide.3, resolver.3, spufs.7, symlink.7, udplite.7, unicode.7: Replace uses of "i.e.," in main text with "that is" or similar
...
Usual man-pages style is to use "i.e." only within
parenthetical expressions.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-01-02 11:49:16 +13:00
8ff7380d6f
epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, fallocate.2, futex.2, getcpu.2, getitimer.2, ioctl_list.2, ioprio_set.2, migrate_pages.2, move_pages.2, pciconfig_read.2, sendfile.2, setns.2, signalfd.2, spu_create.2, spu_run.2, sysinfo.2, timerfd_create.2, backtrace.3, cmsg.3, error.3, getpt.3, getrpcent.3, getrpcport.3, getsubopt.3, offsetof.3, program_invocation_name.3, rpc.3, rpmatch.3, rtnetlink.3, xdr.3, cciss.4, hpsa.4, pts.4, charmap.5, dir_colors.5, elf.5, gai.conf.5, locale.5, nscd.conf.5, nss.5, resolv.conf.5, rpc.5, arp.7, cpuset.7, ddp.7, epoll.7, fifo.7, futex.7, icmp.7, ip.7, ipv6.7, mailaddr.7, netdevice.7, packet.7, raw.7, regex.7, rtnetlink.7, socket.7, spufs.7, tcp.7, udp.7, unix.7, x25.7, ldconfig.8, nscd.8: Global fix: s/END_LICENSE/LICENSE_END/
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-12 10:31:09 +01:00
f0008367e6
epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, ioprio_set.2, signalfd.2, spu_create.2, spu_run.2, timerfd_create.2, charmap.5, locale.5, nscd.conf.5, epoll.7, spufs.7, ldconfig.8, nscd.8: s/GPLv2+_3_PARA_SW/GPLv2+_SW_3_PARA/
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:11 +01:00
ad14cf7429
epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, ioprio_set.2, signalfd.2, spu_create.2, spu_run.2, timerfd_create.2, charmap.5, locale.5, nscd.conf.5, epoll.7, spufs.7, ldconfig.8, nscd.8: Added LICENSE_START(GPLv2+_3_PARA_SW)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:10 +01:00
Michael Kerrisk