Michael Kerrisk
408731d435
intro.1, locale.1, ioctl_list.2, listxattr.2, memfd_create.2, nfsservctl.2, open_by_handle_at.2, perf_event_open.2, poll.2, process_vm_readv.2, ptrace.2, select.2, select_tut.2, semop.2, sendmmsg.2, shmget.2, sigaction.2, spu_run.2, umask.2, wait4.2, nan.3, setlocale.3, feature_test_macros.7, glob.7, posixoptions.7, rtld-audit.7: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-19 13:47:27 +02:00
Michael Kerrisk
b8302363ed
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
...
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-19 13:47:27 +02:00
Michael Kerrisk
e646a1bad9
ioctl_console.2, ioctl_getfsmap.2, ioctl_iflags.2, ioctl_list.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, link.2, mmap.2, modify_ldt.2, msgctl.2, poll.2, query_module.2, quotactl.2, recv.2, recvmmsg.2, sched_setscheduler.2, seccomp.2, select.2, semctl.2, semop.2, send.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sysinfo.2, timer_create.2, timerfd_create.2, uname.2, unshare.2, userfaultfd.2, ustat.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, backtrace.3, bswap.3, btree.3, clock_getcpuclockid.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, fmemopen.3, fopencookie.3, frexp.3, fts.3, ftw.3, getaddrinfo.3, getaddrinfo_a.3, getcontext.3, getgrouplist.3, getifaddrs.3, getipnodebyname.3, getnameinfo.3, getopt.3, getprotoent_r.3, getpwent_r.3, getrpcent.3, getservent_r.3, getttyent.3, getumask.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, inet.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallopt.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mtrace.3, newlocale.3, ntp_gettime.3, offsetof.3, posix_openpt.3, printf.3, pthread_setname_np.3, pthread_setschedparam.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, sigvec.3, stdarg.3, strcat.3, strcpy.3, strftime.3, strtol.3, toupper.3, ttyslot.3, fuse.4, loop.4, st.4, elf.5, cgroup_namespaces.7, cgroups.7, feature_test_macros.7, inode.7, inotify.7, keyrings.7, man-pages.7, math_error.7, mount_namespaces.7, mq_overview.7, pthreads.7, sched.7, session-keyring.7, udplite.7, unix.7, vdso.7: Use consistent markup for code snippets
...
The preferred form is
.PP/.IP
.in +4n
.EX
<code>
.EE
.in
.PP/.IP
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-19 13:47:26 +02:00
Michael Kerrisk
efeece0465
_syscall.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fallocate.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ioprio_set.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open_by_handle_at.2, outb.2, perf_event_open.2, perfmonctl.2, personality.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, recvmmsg.2, remap_file_pages.2, rename.2, request_key.2, restart_syscall.2, rt_sigqueueinfo.2, s390_pci_mmio_write.2, s390_runtime_instr.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysinfo.2, syslog.2, tee.2, time.2, timer_create.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, utime.2, utimensat.2, vfork.2, vmsplice.2, wait.2, wait4.2, write.2: Formatting fix: replace blank lines with .PP/.IP
...
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 09:30:51 +02:00
Michael Kerrisk
f90f031e0f
_exit.2, accept.2, chmod.2, dup.2, getgroups.2, keyctl.2, link.2, mkdir.2, mknod.2, pipe.2, poll.2, reboot.2, rename.2, select.2, select_tut.2, stat.2, symlink.2, unlink.2, __ppc_get_timebase.3, abs.3, bzero.3, crypt.3, dbopen.3, dl_iterate_phdr.3, dlinfo.3, dlsym.3, duplocale.3, encrypt.3, err.3, ffs.3, fpurge.3, ftw.3, getdate.3, gethostbyname.3, getlogin.3, getmntent.3, getpwent_r.3, getpwnam.3, getspnam.3, inet_pton.3, insque.3, isfdtype.3, mallinfo.3, mallopt.3, matherr.3, mcheck.3, mempcpy.3, mkfifo.3, mq_getattr.3, newlocale.3, open_memstream.3, openpty.3, perror.3, posix_memalign.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setaffinity_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, regex.3, resolver.3, rpmatch.3, rtnetlink.3, scanf.3, setbuf.3, strchr.3, strfromd.3, strverscmp.3, termios.3, tsearch.3, unlocked_stdio.3, updwtmp.3, netlink.7, rtld-audit.7, sock_diag.7, unix.7: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 17:44:09 +02:00
Michael Kerrisk
68e4db0a44
_exit.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, create_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, exit_group.2, fanotify_mark.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, ioctl.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_tty.2, ioperm.2, iopl.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_mempolicy.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shutdown.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, sync.2, sysctl.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, difftime.3, dirfd.3, div.3, dlerror.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, erf.3, erfc.3, err.3, errno.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, infnan.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, newlocale.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, y0.3, dsp56k.4, random.4, rtc.4, st.4, ddp.7, ip.7, ipv6.7, packet.7, rtnetlink.7, socket.7, tcp.7, udp.7, udplite.7, x25.7: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 17:16:29 +02:00
Michael Kerrisk
734882f4c4
_exit.2, alarm.2, chmod.2, clone.2, epoll_ctl.2, fcntl.2, fork.2, fsync.2, getdents.2, getpid.2, ioctl.2, ioctl_console.2, ioctl_list.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, kexec_load.2, lseek.2, mincore.2, mkdir.2, mknod.2, mmap.2, open.2, poll.2, posix_fadvise.2, prctl.2, rename.2, sched_setaffinity.2, select.2, select_tut.2, sigaction.2, signalfd.2, sigprocmask.2, sigwaitinfo.2, socketcall.2, stat.2, statx.2, syscalls.2, truncate.2, umask.2, unshare.2, userfaultfd.2, utime.2, utimensat.2, wait.2, bzero.3, cfree.3, exit.3, getentropy.3, grantpt.3, insque.3, shm_open.3, syslog.3, termios.3, ttyname.3, wcsdup.3, console_codes.4, tty.4, vcs.4, elf.5, nsswitch.conf.5, proc.5, slabinfo.5, tmpfs.5, bootparam.7, environ.7, hostname.7, inotify.7, mailaddr.7, man-pages.7, namespaces.7, pid_namespaces.7, pthreads.7, pty.7, sem_overview.7, signal.7, socket.7, tcp.7, termio.7, user_namespaces.7, xattr.7, ld.so.8, zdump.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-05-03 19:27:48 +02:00
Michael Kerrisk
b3da9249db
poll.2: POLLERR is also set on write end of a pipe when the read end is closed
...
Reported-by: Nicolas Biscos <nicolas.biscos+man7@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-03-31 06:54:17 +02:00
Michael Kerrisk
e629dd7890
poll.2: Expand discussion of POLLPRI
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-03-29 12:30:50 +02:00
Michael Kerrisk
1804f37dea
poll.2: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-03-29 06:49:17 +02:00
Michael Kerrisk
31a1b45ece
add_key.2, execve.2, fork.2, fsync.2, getrandom.2, getrlimit.2, getxattr.2, inotify_add_watch.2, ioctl.2, ioctl_fat.2, kcmp.2, keyctl.2, link.2, listxattr.2, lseek.2, madvise.2, mincore.2, mlock.2, nanosleep.2, poll.2, posix_fadvise.2, read.2, readv.2, recv.2, request_key.2, select.2, send.2, setxattr.2, sigaction.2, stat.2, statfs.2, syscall.2, tkill.2, truncate.2, unlink.2, vfork.2, write.2, __ppc_set_ppr_med.3, aio_suspend.3, backtrace.3, bcmp.3, bcopy.3, bzero.3, exec.3, fopen.3, fts.3, ftw.3, getline.3, getmntent.3, getopt.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, random.3, random_r.3, resolver.3, scandir.3, scanf.3, sem_post.3, sem_wait.3, setjmp.3, sleep.3, strerror.3, strverscmp.3, system.3, random.4, core.5, intro.5, resolv.conf.5, slabinfo.5, environ.7, ip.7, keyrings.7, man.7, persistent-keyring.7, pipe.7, process-keyring.7, random.7, session-keyring.7, signal-safety.7, signal.7, thread-keyring.7, unix.7, user-keyring.7, user-session-keyring.7, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-03-13 21:14:49 +01:00
Michael Kerrisk
f8dcca844a
poll.2i, select.2: ffix + srcfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-12-27 21:09:07 +01:00
Nicolas B
f25ea51b98
poll.2, select.2: Add a reference to the sigset discussion in sigprocmask(2)
...
A little while back, I added a note to sigprocmask.2 that
discussed the difference between the libc's and the kernel's
sigset_t structures. I added that note, because I saw this being
done wrong in a tool tracing system calls (causing subtle bugs).
As it turns out, the same bugs existed for ppoll and pselect, for
the same reason. I'm hoping by adding the reference here, future
writers of similar tools will find that discussion and not make
the same mistake.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-12-27 21:05:48 +01:00
Michael Kerrisk
979867082b
locale.1, localedef.1, _exit.2, accept.2, access.2, acct.2, adjtimex.2, bdflush.2, bind.2, bpf.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_ctl.2, eventfd.2, execve.2, fallocate.2, fanotify_init.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, getdomainname.2, getgroups.2, gethostname.2, getpagesize.2, getpeername.2, getsid.2, getsockname.2, getsockopt.2, gettimeofday.2, init_module.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, kexec_load.2, kill.2, killpg.2, link.2, listen.2, llseek.2, lseek.2, madvise.2, memfd_create.2, mincore.2, mkdir.2, mknod.2, mmap.2, mount.2, nanosleep.2, nice.2, open.2, personality.2, pipe.2, poll.2, posix_fadvise.2, read.2, readahead.2, readlink.2, readv.2, recv.2, recvmmsg.2, rename.2, request_key.2, sched_setaffinity.2, sched_setattr.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendfile.2, sendmmsg.2, seteuid.2, setns.2, setpgid.2, setreuid.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigsuspend.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, symlink.2, sync.2, syscall.2, syscalls.2, times.2, truncate.2, unlink.2, unshare.2, uselib.2, utimensat.2, vfork.2, vhangup.2, wait.2, wait4.2, write.2, a64l.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_read.3, aio_write.3, asin.3, asinh.3, atan.3, atan2.3, atanh.3, atoi.3, backtrace.3, cbrt.3, ceil.3, cfree.3, clearenv.3, clock_getcpuclockid.3, clog10.3, cmsg.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, daemon.3, dirfd.3, div.3, dl_iterate_phdr.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, endian.3, erf.3, erfc.3, errno.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, ferror.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmin.3, fmod.3, fopen.3, fpclassify.3, frexp.3, fseeko.3, fts.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getline.3, getloadavg.3, getmntent.3, getnameinfo.3, getnetent_r.3, getpass.3, getprotoent_r.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getservent_r.3, getspnam.3, getsubopt.3, getusershell.3, getutent.3, getw.3, gsignal.3, hypot.3, ilogb.3, inet.3, initgroups.3, insque.3, isalpha.3, isgreater.3, iswblank.3, j0.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, makedev.3, matherr.3, mbsnrtowcs.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_receive.3, mq_send.3, nan.3, nextafter.3, on_exit.3, open_memstream.3, opendir.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, psignal.3, pthread_attr_setstack.3, pthread_setaffinity_np.3, putenv.3, putpwent.3, qecvt.3, rand.3, random.3, random_r.3, rcmd.3, readdir.3, realpath.3, remainder.3, remquo.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, scalb.3, scalbln.3, scandir.3, scanf.3, seekdir.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setnetgrent.3, siginterrupt.3, signbit.3, significand.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stpcpy.3, stpncpy.3, strdup.3, strerror.3, strftime.3, strlen.3, strnlen.3, strsep.3, strsignal.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, unlocked_stdio.3, usleep.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wprintf.3, y0.3, pts.4, st.4, tty_ioctl.4, elf.5, gai.conf.5, group.5, locale.5, nsswitch.conf.5, proc.5, utmp.5, aio.7, capabilities.7, credentials.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, mq_overview.7, namespaces.7, pipe.7, signal.7, socket.7, standards.7, svipc.7, symlink.7, time.7, unicode.7, unix.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-15 17:30:43 +13:00
Michael Kerrisk
f14637570d
poll.2: Document spurious EAGAIN error that can occur on other systems
...
Light reworking of text proposed by Josh Triplett.
Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-02-04 12:34:06 +01:00
Michael Kerrisk
29b41e747f
accept.2, acct.2, bind.2, clock_getres.2, connect.2, dup.2, epoll_create.2, eventfd.2, execve.2, fanotify_init.2, fcntl.2, fork.2, futex.2, get_robust_list.2, getcpu.2, getpeername.2, getrlimit.2, getsockname.2, getsockopt.2, gettimeofday.2, inotify_init.2, listen.2, membarrier.2, memfd_create.2, mlock.2, mmap.2, personality.2, pipe.2, poll.2, recv.2, send.2, sendfile.2, shmget.2, shutdown.2, sigreturn.2, socket.2, socketcall.2, socketpair.2, spu_create.2, swapon.2, time.2, timerfd_create.2, uselib.2, dlerror.3, dlopen.3, drand48.3, errno.3, fnmatch.3, getgrent.3, getgrnam.3, getlogin.3, getpwent.3, getpwnam.3, iconv.3, mq_open.3, opendir.3, random_r.3, sem_open.3, shm_open.3, tmpfile.3, tzset.3, random.4, fanotify.7, futex.7, vdso.7, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-29 13:48:42 +01:00
Michael Kerrisk
0bf502fc7f
poll.2: Shorten name of timeout argument for ppoll()
...
The name is overly long, and does not hint at the fact
that this argument is a pointer. Fix this by renaming:
s/timeout_ts/tmo_p/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-23 23:25:41 +01:00
richardvoigt@gmail.com
32c8dbc049
poll.2: timeout_ts is a pointer, so use -> not . for member access
...
From the context, it is apparent that in the code explaining
ppoll in terms of poll, timeout_ts must be a pointer.
Usage #1 : ready = ppoll(&fds, nfds, timeout_ts, &sigmask);
Usage #2 : (timeout_ts == NULL)
Thus member access in (timeout_ts.tv_sec * 1000 +
timeout_ts.tv_nsec / 1000000) is an error.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-23 23:19:09 +01:00
Michael Kerrisk
a2dcc3bbbc
poll.2: CONFORMING TO: add POSIX.1-2008
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-07-24 09:32:04 +02:00
Michael Kerrisk
5722c835ab
intro.1, locale.1, _exit.2, access.2, bpf.2, brk.2, capget.2, chmod.2, chroot.2, clock_getres.2, clone.2, eventfd.2, fallocate.2, fork.2, getgroups.2, gethostname.2, getpid.2, getpriority.2, getrlimit.2, getrusage.2, gettid.2, iopl.2, ioprio_set.2, killpg.2, mlock.2, mprotect.2, perf_event_open.2, poll.2, posix_fadvise.2, pread.2, ptrace.2, read.2, readv.2, recv.2, rename.2, sched_setaffinity.2, sched_setattr.2, seccomp.2, select.2, send.2, seteuid.2, setgid.2, setresuid.2, setreuid.2, setuid.2, sigaltstack.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, stat.2, timer_create.2, uname.2, utimensat.2, wait.2, wait4.2, write.2, MB_LEN_MAX.3, __ppc_get_timebase.3, clearenv.3, dl_iterate_phdr.3, error.3, fexecve.3, fpurge.3, fread.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getgrent_r.3, gethostbyname.3, getifaddrs.3, getnameinfo.3, getnetent_r.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent_r.3, getrpcent.3, getrpcent_r.3, getrpcport.3, getservent.3, getservent_r.3, gsignal.3, key_setsecret.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, memcpy.3, mq_notify.3, mq_open.3, perror.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_detach.3, pthread_getattr_np.3, pthread_join.3, pthread_setname_np.3, pthread_tryjoin_np.3, putgrent.3, rcmd.3, rpc.3, rpmatch.3, sem_close.3, sem_open.3, setaliasent.3, shm_open.3, sigqueue.3, strfmon.3, xcrypt.3, xdr.3, console_codes.4, null.4, core.5, host.conf.5, hosts.equiv.5, locale.5, repertoiremap.5, locale.7, man-pages.7, pty.7, rtld-audit.7, sched.7, vdso.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-07-23 16:12:28 +02:00
Michael Kerrisk
0722a578ed
_exit.2, access.2, brk.2, chmod.2, clone.2, epoll_wait.2, eventfd.2, fork.2, getgroups.2, gethostname.2, getpid.2, getpriority.2, killpg.2, mmap.2, poll.2, posix_fadvise.2, pread.2, ptrace.2, readv.2, sched_setaffinity.2, select.2, seteuid.2, setgid.2, setresuid.2, setreuid.2, setuid.2, sigaction.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, stat.2, timer_create.2, uname.2, wait.2, wait4.2, mq_notify.3, mq_open.3, sigqueue.3, man-pages.7: Remove "ABI" from "C library/kernel ABI differences" subheadings
...
The "ABI" doesn't really convey anything significant in
the title. These subsections are about describing differences
between the kernel and (g)libc interfaces.
Reported-by: Andries E. Brouwer <Andries.Brouwer@cwi.nl>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-05-08 13:10:04 +02:00
Michael Kerrisk
7e8924ba6a
poll.2: After POLLHUP, EOF will be seen only after all data has been consumed
...
Reported-by: Sam Varshavchik <mrsam@courier-mta.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-05-02 09:20:13 +02:00
Michael Kerrisk
b09322c487
poll.2: Make it clearer which bits are ignored in 'events'
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-05-02 09:14:51 +02:00
Michael Kerrisk
74083180e3
poll.2: Clarify that signal mask treatment in ppoll() is per-thread
...
s/sigprocmask()/pthread_sigmask()/
Reported-by: Ian Pilcher <arequipeno@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-05-02 09:02:12 +02:00
Michael Kerrisk
c73595c249
getent.1, fallocate.2, getrlimit.2, llseek.2, madvise.2, mount.2, poll.2, posix_fadvise.2, pread.2, stat.2, symlink.2, timer_create.2, timerfd_create.2, unshare.2, acos.3, acosh.3, asin.3, asinh.3, asprintf.3, atan.3, atan2.3, atanh.3, cabs.3, cacos.3, cacosh.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cimag.3, clog.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, erf.3, erfc.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, floor.3, fma.3, fmax.3, fmin.3, fmod.3, frexp.3, ftw.3, get_nprocs_conf.3, getcwd.3, gethostbyname.3, getnetent.3, getutent.3, glob.3, ilogb.3, insque.3, j0.3, ldexp.3, lgamma.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lseek64.3, malloc.3, mbsnrtowcs.3, mbsrtowcs.3, modf.3, mq_notify.3, mq_open.3, nan.3, nextafter.3, openpty.3, perror.3, posix_memalign.3, pow.3, printf.3, qsort.3, realpath.3, remainder.3, remquo.3, rint.3, round.3, scalbln.3, scandir.3, scanf.3, setnetgrent.3, significand.3, sin.3, sinh.3, sqrt.3, strcasecmp.3, tan.3, tanh.3, tgamma.3, trunc.3, unlocked_stdio.3, updwtmp.3, wcrtomb.3, wcsnrtombs.3, wcsrtombs.3, wordexp.3, wprintf.3, y0.3, epoll.7, icmp.7, nptl.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-04-19 11:20:58 +02:00
Michael Kerrisk
9755c034f7
poll.2: SEE ALSO: add epoll(7)
...
Reported-by: Andreas Baak <andreas.baak@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-04-18 13:20:39 +02:00
Michael Kerrisk
62c76ace78
memusage.1, memusagestat.1, connect.2, fcntl.2, poll.2, errno.3, rtnetlink.3, inotify.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-09-07 05:03:19 -07:00
Rusty Russell
d2e7d1bb58
poll.2, select.2: fix erroneous description of "available for write".
...
POSIX says: "POLLOUT Normal data may be written without
blocking.". This is "may" is misleading, see the POSIX
write page:
Write requests to a pipe or FIFO shall be handled in the
same way as a regular file with the following exceptions:
...
If the O_NONBLOCK flag is clear, a write request may cause
the thread to block, but on normal completion it shall
return nbyte.
...
When attempting to write to a file descriptor (other than a
pipe or FIFO) that supports non-blocking writes and cannot
accept the data immediately:
If the O_NONBLOCK flag is clear, write() shall block the
calling thread until the data can be accepted.
If the O_NONBLOCK flag is set, write() shall not block the
thread. If some data can be written without blocking the
thread, write() shall write what it can and return the
number of bytes written. Otherwise, it shall return -1 and
set errno to [EAGAIN].
The net result is that write() of more than 1 byte on a
socket, pipe or FIFO which is "ready" may block: write()
(unlike read!) will attempt to write the entire buffer and
only return a short write under exceptional circumstances.
Indeed, this is the behaviour we see in Linux:
897626152d
https://plus.google.com/103188246877163594460/posts/BkTGTMHDFgZ
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-09-01 19:36:03 +02:00
Michael Kerrisk
361ec6881d
poll.2: Describe fifth argument (sigsetsize) of raw ppoll() system call
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-18 17:01:47 -05:00
Michael Kerrisk
360b1b71de
poll.2: NOTES: add "C library/kernel ABI differences" subheading
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-18 17:01:47 -05:00
Michael Kerrisk
c77eace5b1
iconv.1, ldd.1, connect.2, dup.2, epoll_ctl.2, eventfd.2, fallocate.2, fcntl.2, getitimer.2, inotify_add_watch.2, open.2, pipe.2, poll.2, sendmmsg.2, set_tid_address.2, shmop.2, signalfd.2, splice.2, syscalls.2, syslog.2, tee.2, vmsplice.2, ether_aton.3, mallopt.3, printf.3, profil.3, charmap.5, proc.5, epoll.7, inotify.7, libc.7, pipe.7, sched.7, socket.7, udplite.7, iconvconfig.8, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-07-08 16:14:48 +02:00
Michael Kerrisk
e2cfd90e5b
poll.2: The negate-fd-to-ignore technique does not work for file descriptor 0
...
See https://bugzilla.kernel.org/show_bug.cgi?id=79411
Reported-by: Nadav Har'El <nyh@math.technion.ac.il>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-07-03 08:17:14 +02:00
Michael Kerrisk
726663fd9d
bind.2, connect.2, create_module.2, delete_module.2, execve.2, get_robust_list.2, getpriority.2, getrusage.2, init_module.2, link.2, listen.2, mbind.2, open.2, poll.2, query_module.2, readlink.2, recv.2, remap_file_pages.2, sched_setaffinity.2, semop.2, send.2, stat.2, stime.2, syscall.2, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, remquo.3, rtime.3, sched_getcpu.3, stpcpy.3, stpncpy.3, strcasecmp.3, system.3, fd.4, proc.5, ip.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-05-08 11:31:12 +02:00
Rasmus Villemoes
da30ae718f
poll.2: Add <signal.h> to synopsis for ppoll()
...
One needs to #include <signal.h> to get the definition of the
type (sigset_t) of the mask argument to ppoll().
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-05-08 11:26:55 +02:00
Michael Kerrisk
216b9e6182
poll.2: spfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-03-16 11:36:57 +01:00
Michael Kerrisk
40df3d0039
epoll_wait.2, poll.2, select.2: Go into more detail on timeout and when call will cease blocking
...
Reported-by: Network Nut <sillystack@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-01-31 07:47:22 +01:00
Michael Kerrisk
210cded680
poll.2: Clarify meaning of events==0
...
events==0 does not mean that revents is always returned as
zero. The "output only" events (POLLHUP, POLLERR, POLLNVAL)
can still be returned.
See https://bugzilla.kernel.org/show_bug.cgi?id=61911
Reported-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-11-08 07:13:19 +13:00
Michael Kerrisk
0d9101c438
poll.2: Clarify wording of 'timeout' as a "minimum" interval
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-09-04 10:39:34 +02:00
Michael Kerrisk
d806bc0518
clock_nanosleep.2, futex.2, nanosleep.2, poll.2, sigaction.2, sigreturn.2, signal.7: SEE ALSO: add restart_syscall(2)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-07-30 05:21:20 +02:00
Michael Kerrisk
930152530c
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:10 +01:00
Michael Kerrisk
4b72fb6462
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:09 +01:00
Michael Kerrisk
dac8367047
_exit.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clone.2, close.2, connect.2, dup.2, execve.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futimesat.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, idle.2, ioperm.2, iopl.2, ipc.2, kexec_load.2, kill.2, link.2, linkat.2, lookup_dcookie.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mq_getsetattr.2, mremap.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, perf_event_open.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, ptrace.2, read.2, readahead.2, readlinkat.2, rename.2, renameat.2, rmdir.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, setresuid.2, setup.2, socketcall.2, splice.2, stat.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, tee.2, time.2, times.2, tkill.2, umask.2, umount.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, utime.2, utimensat.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, ether_aton.3, euidaccess.3, fexecve.3, ftime.3, futimes.3, getdirentries.3, getdtablesize.3, gethostid.3, getlogin.3, getpt.3, grantpt.3, hsearch.3, inet.3, lsearch.3, mkfifo.3, mkfifoat.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, posix_openpt.3, profil.3, ptsname.3, scandirat.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, shm_open.3, stpcpy.3, termios.3, toascii.3, tsearch.3, ulimit.3, undocumented.3, unlockpt.3, pts.4, charmap.5, locale.5, services.5, feature_test_macros.7, inotify.7, mq_overview.7, pipe.7, pty.7, sem_overview.7, shm_overview.7, unicode.7, utf-8.7: Global fix: remove "Hey Emacs" comment in page source
...
Only certain pages have this; there is no consistency, so
remove it from all pages
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:08 +01:00
Michael Kerrisk
47297adb6e
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 19:01:36 +01:00
Michael Kerrisk
c634028ab5
intro.1, time.1, _syscall.2, accept.2, brk.2, capget.2, faccessat.2, futimesat.2, gethostname.2, intro.2, ioprio_set.2, kill.2, madvise.2, mlock.2, mount.2, msgget.2, perf_event_open.2, poll.2, readv.2, sched_rr_get_interval.2, sched_setscheduler.2, select.2, select_tut.2, shmget.2, stat.2, timer_create.2, ustat.2, vfork.2, wait.2, alloca.3, atexit.3, catopen.3, crypt.3, dbopen.3, fenv.3, fopen.3, getaddrinfo_a.3, gethostbyname.3, getutent.3, intro.3, login.3, mallopt.3, queue.3, regex.3, sigpause.3, sigsetops.3, stdio.3, strftime.3, strptime.3, sysconf.3, ttyslot.3, undocumented.3, cciss.4, console_codes.4, hpsa.4, initrd.4, intro.4, rtc.4, st.4, tty_ioctl.4, wavelan.4, acct.5, charmap.5, dir_colors.5, hosts.5, intro.5, termcap.5, utmp.5, intro.6, armscii-8.7, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, ddp.7, epoll.7, glob.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man-pages.7, man.7, math_error.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, pthreads.7, raw.7, rtnetlink.7, signal.7, socket.7, spufs.7, svipc.7, tcp.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, intro.8: Global fix: use consistent capitalization in .SS headings
...
Capitalization in .SS sections across pages (and sometimes even
within a single page) is wildly inconsistent. Make it consistent.
Capitalize first word in heading, but otherwise use lower case,
except where English usage (e.g., proper nouns) or programming
language requirements (e.g., identifier names) dictate otherwise.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 15:08:38 +01:00
Michael Kerrisk
f33050d604
poll.2: Add pointer to select(2) for discussion of close in another thread
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-08-17 08:36:48 +02:00
David Prévot
01d8b73f92
poll.2: tfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-10 18:07:47 +12:00
Michael Kerrisk
6f0b2c8c9a
poll.2: Clarify discussion of wrapper function emulation
...
Clarify that glibc (as well as old libc) provides emulation
using select(2) on older kernels that don't have a poll()
system call.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:16 +12:00
Michael Kerrisk
77e74cf141
poll.2: Make the meaning of a zero timeout explicit
...
Clarify that timeout==0 causes an immediate return, even if
no file descriptors are ready.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:14 +12:00
Michael Kerrisk
19257d8fe6
poll.2: Clarify that 'timeout' is a *minimum* interval
...
Make it clear that 'timeout' is a minimum interval; the actual
interval will be rounded up to the system clock granularity,
and may overrun because of kernel scheduling delays.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-05-07 15:30:14 +12:00
Michael Kerrisk
b857fda584
poll.2: Document semantics of passing zero in 'events' field
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-04-16 08:27:09 +12:00