Michael Kerrisk
c112329ffe
Various pages: Standardize wording around setting of 'errno' on error
...
In the RETURN VALUE sections, a number of different wordings
are used in to describe the fact that 'errno' is set on error.
There's no reason for the difference in wordings, since the same
thing is being described in each case. Switch to a standard
wording that is the same as FreeBSD and similar to the wording
used in POSIX.1.
In this change, reword various cases saying that 'errno' is set
"appropriately" to "is set to indicate the error".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-07 14:27:51 +01:00
Alejandro Colomar
eaa18d3c44
Various pages: Remove explicit blank lines, replacing them with .PP when appropriate
...
Rationale:
$ man 7 man-pages 2>/dev/null | sed -n /Paragraphs/,/^$/p
Paragraphs should be separated by suitable markers (usually
either .PP or .IP). Do not separate paragraphs using blank
lines, as this results in poor rendering in some output
formats (such as PostScript and PDF).
Fix:
$ sed -i -e '1,/^\.EX/s/^$/.PP/' -e '/^\.EE/,/^\.EX/s/^$/.PP/' man?/*
And then some manual adjustments.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-12-23 13:19:10 +01:00
Michael Kerrisk
9bfc9cb197
dup.2, fallocate.2, futex.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, madvise.2, membarrier.2, mprotect.2, open.2, openat2.2, perf_event_open.2, perfmonctl.2, pipe.2, process_vm_readv.2, s390_pci_mmio_write.2, s390_runtime_instr.2, s390_sthyi.2, set_thread_area.2, sigprocmask.2, subpage_prot.2, unshare.2, cmsg.3, newlocale.3, pthread_setname_np.3, strfmon.3, strfromd.3, tsearch.3, tcp.7, ld.so.8: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-06-11 07:45:09 +02:00
Michael Kerrisk
bffbb22fda
iconv.1, locale.1, memusage.1, memusagestat.1, pldd.1, sprof.1, _syscall.2, add_key.2, adjtimex.2, bind.2, bpf.2, chown.2, clone.2, close.2, copy_file_range.2, eventfd.2, fanotify_init.2, fanotify_mark.2, fork.2, fsync.2, futex.2, getdents.2, getrlimit.2, getxattr.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, ioctl_fat.2, ioctl_getfsmap.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, kcmp.2, keyctl.2, listen.2, listxattr.2, mbind.2, membarrier.2, memfd_create.2, mkdir.2, move_pages.2, mremap.2, msync.2, nfsservctl.2, open.2, perf_event_open.2, pidfd_send_signal.2, pipe.2, pivot_root.2, pkey_alloc.2, process_vm_readv.2, ptrace.2, readlink.2, readv.2, recv.2, recvmmsg.2, rename.2, request_key.2, s390_runtime_instr.2, sched_setaffinity.2, seccomp.2, send.2, sendmmsg.2, sigaltstack.2, signalfd.2, socket.2, socketpair.2, splice.2, spu_create.2, spu_run.2, statfs.2, syscall.2, sysctl.2, sysfs.2, tee.2, timer_getoverrun.2, timer_settime.2, umount.2, userfaultfd.2, utimensat.2, wait4.2, INFINITY.3, __ppc_get_timebase.3, __setfpucw.3, abort.3, aio_cancel.3, aio_error.3, aio_read.3, aio_return.3, atexit.3, backtrace.3, basename.3, bsearch.3, bswap.3, cacos.3, cacosh.3, catan.3, catanh.3, cexp2.3, clock_getcpuclockid.3, clog2.3, cmsg.3, confstr.3, div.3, dl_iterate_phdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, err.3, expm1.3, fdim.3, flockfile.3, fmtmsg.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo_a.3, getauxval.3, getdate.3, getdtablesize.3, getgrent_r.3, getgrouplist.3, gethostbyname.3, getline.3, getnameinfo.3, getopt.3, getprotoent_r.3, getpwent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, getutent.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, insque.3, killpg.3, makecontext.3, mallinfo.3, malloc.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbstowcs.3, mcheck.3, mempcpy.3, mq_getattr.3, mq_notify.3, mtrace.3, newlocale.3, nextafter.3, ntp_gettime.3, offsetof.3, open_memstream.3, pow.3, printf.3, pthread_attr_init.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setstack.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_detach.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_mutex_consistent.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_spin_init.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, qsort.3, rand.3, random.3, remainder.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, sem_getvalue.3, sem_wait.3, setaliasent.3, setlogmask.3, sigwait.3, sincos.3, sockatmark.3, stdarg.3, stpcpy.3, strcat.3, strfmon.3, strptime.3, strtod.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, tsearch.3, uselocale.3, wcstok.3, wcstombs.3, wordexp.3, y0.3, loop.4, vcs.4, veth.4, charmap.5, core.5, filesystems.5, gai.conf.5, hosts.5, hosts.equiv.5, locale.5, nss.5, repertoiremap.5, securetty.5, shells.5, ttytype.5, ascii.7, complex.7, cpuset.7, credentials.7, fanotify.7, hier.7, inotify.7, ip.7, mount_namespaces.7, mq_overview.7, netlink.7, network_namespaces.7, pid_namespaces.7, pkeys.7, rtld-audit.7, rtnetlink.7, sem_overview.7, signal-safety.7, sock_diag.7, spufs.7, standards.7, symlink.7, tcp.7, time_namespaces.7, unix.7, user_namespaces.7, xattr.7, ldconfig.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-06-09 14:48:40 +02:00
Michael Kerrisk
a14af333d6
Various pages: retitle EXAMPLE section heading to EXAMPLES
...
EXAMPLES appears to be the wider majority usage across various
projects' manual pages, and is also what is used in the POSIX
manual pages.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-05-31 10:45:27 +02:00
Michael Kerrisk
5dbd04b5f9
pipe.2, socketpair.2, dlopen.3, posix_memalign.3, signal-safety.7: Correct bogus POSIX.1 standards names
...
POSIX.1-2003 ==> POSIX.1-2001 TC1
POSIX.1-2004 ==> POSIX.1-2001 TC2
POSIX.1-2013 ==> POSIX.1-2008 TC1
POSIX.1-2016 ==> POSIX.1-2008 TC2
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-05-26 13:25:54 +02:00
Michael Kerrisk
81b8997f5f
pipe.2, sigaltstack.2, abort.3, signal.7: Place SH sections in standard order
...
Fix various pages that deviated from the norm described in
man-pages(7).
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-05-19 15:45:01 +02:00
Michael Kerrisk
a3d4007cc6
pipe.2, st.4, filesystems.5: tfix
...
Reported-by: Helge Kreutzmann <debian@helgefjell.de>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-19 22:17:03 +02:00
Michael Kerrisk
1a29a70ded
pipe.2: Note that 'pipefd' is left unchanged in the event of an error
...
See http://austingroupbugs.net/view.php?id=467 .
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-03-18 17:30:23 +01:00
Michael Kerrisk
9ba0180298
getent.1, iconv.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, pldd.1, sprof.1, time.1, _syscall.2, accept.2, add_key.2, adjtimex.2, bind.2, bpf.2, capget.2, chown.2, chroot.2, clock_getres.2, clone.2, connect.2, copy_file_range.2, epoll_ctl.2, epoll_wait.2, eventfd.2, fanotify_init.2, fanotify_mark.2, fcntl.2, fsync.2, futex.2, getcpu.2, getdents.2, getgid.2, getgroups.2, getpid.2, gettid.2, gettimeofday.2, getuid.2, getxattr.2, inotify_add_watch.2, inotify_init.2, ioctl_fat.2, ioctl_ns.2, ioctl_userfaultfd.2, ioprio_set.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, madvise.2, memfd_create.2, migrate_pages.2, mount.2, mprotect.2, mremap.2, msgctl.2, msgop.2, nfsservctl.2, open_by_handle_at.2, perf_event_open.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, readahead.2, readdir.2, readlink.2, reboot.2, recvmmsg.2, removexattr.2, rename.2, request_key.2, s390_guarded_storage.2, s390_runtime_instr.2, s390_sthyi.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, seccomp.2, select.2, select_tut.2, semctl.2, sendmmsg.2, set_thread_area.2, setgid.2, setns.2, setuid.2, setxattr.2, shmctl.2, sigaction.2, signalfd.2, sigsuspend.2, socket.2, socketpair.2, spu_run.2, stat.2, statx.2, subpage_prot.2, syscalls.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, vmsplice.2, write.2, CPU_SET.3, __ppc_get_timebase.3, alloca.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bsd_signal.3, bstring.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, cmsg.3, confstr.3, ctermid.3, ctime.3, des_crypt.3, dl_iterate_phdr.3, dlinfo.3, dlsym.3, duplocale.3, end.3, endian.3, errno.3, exec.3, exit.3, ferror.3, fgetws.3, fmemopen.3, fnmatch.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isatty.3, iswblank.3, iswspace.3, lockf.3, makecontext.3, mallinfo.3, malloc.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, putenv.3, qsort.3, rand.3, random.3, readdir.3, regex.3, resolver.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcmp.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, system.3, termios.3, trunc.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, xcrypt.3, console_codes.4, dsp56k.4, full.4, initrd.4, lirc.4, loop.4, st.4, tty.4, vcs.4, charmap.5, core.5, host.conf.5, locale.5, proc.5, repertoiremap.5, resolv.conf.5, termcap.5, tmpfs.5, tzfile.5, aio.7, capabilities.7, cgroup_namespaces.7, cgroups.7, charsets.7, complex.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, locale.7, man-pages.7, man.7, namespaces.7, pid_namespaces.7, pkeys.7, pthreads.7, rtld-audit.7, sched.7, signal.7, sock_diag.7, socket.7, tcp.7, udp.7, unicode.7, user_namespaces.7, utf-8.7, zdump.8, zic.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-03-06 15:12:10 +01:00
Michael Kerrisk
d1a719857b
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
...
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54 , the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 15:32:50 +01:00
Michael Kerrisk
b0f5ce2757
getgid.2, getpid.2, getuid.2, pipe.2: Remove mention of other syscalls that use second retval register
...
This information is already summarized in syscall(2), so there's
no need to repeat it in each page.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-01-10 06:21:17 +13:00
Michael Kerrisk
03936fb4ce
getgid.2, getpid.2, getuid.2, pipe.2, syscall.2: Minor tweaks to Eugene's patch
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-01-10 06:18:39 +13:00
Eugene Syromiatnikov
70ea1968cc
getgid.2, getpid.2, getuid.2, pipe.2, syscall.2: Describe 2nd return value peculiarity
...
Some architectures (ab)use second return value register for additional
return value in some system calls. Let's describe this.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-01-10 05:46:35 +13:00
Michael Kerrisk
7f11e32c39
accept.2, copy_file_range.2, eventfd.2, inotify_init.2, pipe.2, readahead.2, signalfd.2, socket.2, timerfd_create.2: Clarify the distinction between "file descriptor" and "file description"
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-12-01 09:42:01 +01:00
Michael Kerrisk
1c6f59c276
getpid.2, pipe.2, abort.3, daemon.3, pthread_yield.3, stdio.3, sysconf.3, tty.4, shells.5, sysfs.5, fifo.7, hier.7, icmp.7, path_resolution.7, pid_namespaces.7, standards.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-11-26 12:38:46 +01:00
Michael Kerrisk
2a871e9941
pipe.2: Since Linux 4.5, fcntl() can be used to set O_DIRECT for a pipe
...
See https://bugzilla.kernel.org/show_bug.cgi?id=197917
Reported-by: Marin H. <mar-tSIEzQ@neutronstar.noip.me>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-11-23 13:36:06 +01:00
Michael Kerrisk
f90f031e0f
_exit.2, accept.2, chmod.2, dup.2, getgroups.2, keyctl.2, link.2, mkdir.2, mknod.2, pipe.2, poll.2, reboot.2, rename.2, select.2, select_tut.2, stat.2, symlink.2, unlink.2, __ppc_get_timebase.3, abs.3, bzero.3, crypt.3, dbopen.3, dl_iterate_phdr.3, dlinfo.3, dlsym.3, duplocale.3, encrypt.3, err.3, ffs.3, fpurge.3, ftw.3, getdate.3, gethostbyname.3, getlogin.3, getmntent.3, getpwent_r.3, getpwnam.3, getspnam.3, inet_pton.3, insque.3, isfdtype.3, mallinfo.3, mallopt.3, matherr.3, mcheck.3, mempcpy.3, mkfifo.3, mq_getattr.3, newlocale.3, open_memstream.3, openpty.3, perror.3, posix_memalign.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setaffinity_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, regex.3, resolver.3, rpmatch.3, rtnetlink.3, scanf.3, setbuf.3, strchr.3, strfromd.3, strverscmp.3, termios.3, tsearch.3, unlocked_stdio.3, updwtmp.3, netlink.7, rtld-audit.7, sock_diag.7, unix.7: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 17:44:09 +02:00
Michael Kerrisk
a12f0259f8
pipe.2: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-13 22:35:43 +02:00
Michael Kerrisk
f55a6d598d
Changes, ldd.1, chown.2, epoll_wait.2, get_mempolicy.2, ioctl_getfsmap.2, madvise.2, membarrier.2, mount.2, pipe.2, readv.2, seccomp.2, sigaltstack.2, splice.2, tee.2, timer_create.2, vmsplice.2, acosh.3, asinh.3, atanh.3, bsd_signal.3, dl_iterate_phdr.3, dlsym.3, flockfile.3, fpathconf.3, ftw.3, getaddrinfo.3, getcontext.3, getgrent.3, if_nametoindex.3, malloc.3, nl_langinfo.3, posix_madvise.3, ptsname.3, rand.3, resolver.3, sigpause.3, sigwait.3, strtol.3, sysconf.3, ttyslot.3, unlocked_stdio.3, unlockpt.3, capabilities.7, cgroup_namespaces.7, inode.7, man.7, pipe.7, sigevent.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-07-13 14:22:45 +02:00
Michael Kerrisk
d766983819
pipe.2: SEE ALSO: add tee(2) and vmsplice(2)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-06-14 13:21:04 +02:00
Michael Kerrisk
35deeb8703
bind.2, chmod.2, chown.2, chroot.2, clock_getres.2, clone.2, connect.2, dup.2, fallocate.2, get_mempolicy.2, getpeername.2, getpriority.2, getsockname.2, getsockopt.2, gettimeofday.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, kill.2, mbind.2, mmap.2, mount.2, mprotect.2, nfsservctl.2, nice.2, open.2, perf_event_open.2, pipe.2, pkey_alloc.2, prctl.2, ptrace.2, quotactl.2, remap_file_pages.2, sched_setscheduler.2, set_mempolicy.2, signal.2, signalfd.2, swapon.2, sync_file_range.2, syscalls.2, timer_create.2, timerfd_create.2, utime.2, utimensat.2, wait.2, atof.3, ctime.3, errno.3, fclose.3, fflush.3, insque.3, malloc_get_state.3, mallopt.3, mbsnrtowcs.3, mq_close.3, mq_open.3, mq_receive.3, mq_send.3, printf.3, pthread_attr_init.3, pthread_create.3, pthread_setaffinity_np.3, ptsname.3, remainder.3, strtod.3, tgamma.3, timegm.3, tmpnam.3, ttyname.3, console_ioctl.4, elf.5, filesystems.5, proc.5, utmp.5, capabilities.7, cgroups.7, credentials.7, ddp.7, feature_test_macros.7, fifo.7, inotify.7, libc.7, mount_namespaces.7, namespaces.7, netlink.7, pid_namespaces.7, pkeys.7, shm_overview.7, standards.7, uri.7, user_namespaces.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-12-12 10:45:24 +01:00
Michael Kerrisk
4288fe3225
pipe.2: Add ENFILE error for user pipe hard limit reached
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-11-06 13:14:06 -07:00
Michael Kerrisk
979867082b
locale.1, localedef.1, _exit.2, accept.2, access.2, acct.2, adjtimex.2, bdflush.2, bind.2, bpf.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_ctl.2, eventfd.2, execve.2, fallocate.2, fanotify_init.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, getdomainname.2, getgroups.2, gethostname.2, getpagesize.2, getpeername.2, getsid.2, getsockname.2, getsockopt.2, gettimeofday.2, init_module.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, kexec_load.2, kill.2, killpg.2, link.2, listen.2, llseek.2, lseek.2, madvise.2, memfd_create.2, mincore.2, mkdir.2, mknod.2, mmap.2, mount.2, nanosleep.2, nice.2, open.2, personality.2, pipe.2, poll.2, posix_fadvise.2, read.2, readahead.2, readlink.2, readv.2, recv.2, recvmmsg.2, rename.2, request_key.2, sched_setaffinity.2, sched_setattr.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendfile.2, sendmmsg.2, seteuid.2, setns.2, setpgid.2, setreuid.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigsuspend.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, symlink.2, sync.2, syscall.2, syscalls.2, times.2, truncate.2, unlink.2, unshare.2, uselib.2, utimensat.2, vfork.2, vhangup.2, wait.2, wait4.2, write.2, a64l.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_read.3, aio_write.3, asin.3, asinh.3, atan.3, atan2.3, atanh.3, atoi.3, backtrace.3, cbrt.3, ceil.3, cfree.3, clearenv.3, clock_getcpuclockid.3, clog10.3, cmsg.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, daemon.3, dirfd.3, div.3, dl_iterate_phdr.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, endian.3, erf.3, erfc.3, errno.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, ferror.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmin.3, fmod.3, fopen.3, fpclassify.3, frexp.3, fseeko.3, fts.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getline.3, getloadavg.3, getmntent.3, getnameinfo.3, getnetent_r.3, getpass.3, getprotoent_r.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getservent_r.3, getspnam.3, getsubopt.3, getusershell.3, getutent.3, getw.3, gsignal.3, hypot.3, ilogb.3, inet.3, initgroups.3, insque.3, isalpha.3, isgreater.3, iswblank.3, j0.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, makedev.3, matherr.3, mbsnrtowcs.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_receive.3, mq_send.3, nan.3, nextafter.3, on_exit.3, open_memstream.3, opendir.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, psignal.3, pthread_attr_setstack.3, pthread_setaffinity_np.3, putenv.3, putpwent.3, qecvt.3, rand.3, random.3, random_r.3, rcmd.3, readdir.3, realpath.3, remainder.3, remquo.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, scalb.3, scalbln.3, scandir.3, scanf.3, seekdir.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setnetgrent.3, siginterrupt.3, signbit.3, significand.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stpcpy.3, stpncpy.3, strdup.3, strerror.3, strftime.3, strlen.3, strnlen.3, strsep.3, strsignal.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, unlocked_stdio.3, usleep.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wprintf.3, y0.3, pts.4, st.4, tty_ioctl.4, elf.5, gai.conf.5, group.5, locale.5, nsswitch.conf.5, proc.5, utmp.5, aio.7, capabilities.7, credentials.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, mq_overview.7, namespaces.7, pipe.7, signal.7, socket.7, standards.7, svipc.7, symlink.7, time.7, unicode.7, unix.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-15 17:30:43 +13:00
Michael Kerrisk
89cfe0cf65
pipe.2: Note treatment of 'pipefd' on error
...
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-05 08:52:29 +01:00
Michael Kerrisk
d9cb0d7d3f
Various pages: Word "descriptor" more precisely
...
Use either "file descriptor" or message queue descriptor".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-01-01 12:29:37 +01:00
Michael Kerrisk
29b41e747f
accept.2, acct.2, bind.2, clock_getres.2, connect.2, dup.2, epoll_create.2, eventfd.2, execve.2, fanotify_init.2, fcntl.2, fork.2, futex.2, get_robust_list.2, getcpu.2, getpeername.2, getrlimit.2, getsockname.2, getsockopt.2, gettimeofday.2, inotify_init.2, listen.2, membarrier.2, memfd_create.2, mlock.2, mmap.2, personality.2, pipe.2, poll.2, recv.2, send.2, sendfile.2, shmget.2, shutdown.2, sigreturn.2, socket.2, socketcall.2, socketpair.2, spu_create.2, swapon.2, time.2, timerfd_create.2, uselib.2, dlerror.3, dlopen.3, drand48.3, errno.3, fnmatch.3, getgrent.3, getgrnam.3, getlogin.3, getpwent.3, getpwnam.3, iconv.3, mq_open.3, opendir.3, random_r.3, sem_open.3, shm_open.3, tmpfile.3, tzset.3, random.4, fanotify.7, futex.7, vdso.7, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-29 13:48:42 +01:00
Michael Kerrisk
e258766bf4
accept.2, acct.2, epoll_create.2, execve.2, futex.2, inotify_init.2, mmap.2, open.2, pipe.2, shmget.2, socket.2, socketpair.2, spu_create.2, swapon.2, uselib.2, getgrent.3, getgrnam.3, getlogin.3, getpwent.3, getpwnam.3, mq_open.3, opendir.3, sem_open.3, shm_open.3, tmpfile.3, fanotify.7: ERRORS: standardize text for ENFILE error
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-27 17:10:23 +01:00
Michael Kerrisk
26c32fabec
accept.2, dup.2, eventfd.2, execve.2, fcntl.2, memfd_create.2, open.2, perf_event_open.2, pipe.2, signalfd.2, socket.2, socketpair.2, spu_create.2, timerfd_create.2, getgrent.3, getgrnam.3, getlogin.3, getpwent.3, getpwnam.3, mq_open.3, opendir.3, sem_open.3, shm_open.3, tmpfile.3: ERRORS: standardize text for EMFILE error
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-12-27 16:37:03 +01:00
Michael Kerrisk
2da4fd3172
pipe.2: SEE ALSO: add splice(2)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-10-16 21:40:42 +02:00
Michael Kerrisk
460495ca58
ldd.1, sprof.1, accept.2, alarm.2, bind.2, chdir.2, clock_nanosleep.2, close.2, connect.2, dup.2, execve.2, fsync.2, getgid.2, getpeername.2, getsid.2, getsockname.2, getsockopt.2, getuid.2, io_getevents.2, kill.2, listen.2, lseek.2, mmap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nice.2, pause.2, pipe.2, rmdir.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select_tut.2, semctl.2, semop.2, setsid.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, signal.2, socketpair.2, sync.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, truncate.2, umask.2, MB_CUR_MAX.3, a64l.3, abs.3, assert.3, atexit.3, atof.3, atoi.3, basename.3, bsearch.3, btowc.3, byteorder.3, catgets.3, catopen.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, crypt.3, ctermid.3, difftime.3, div.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, encrypt.3, exit.3, fclose.3, ffs.3, fgetc.3, fgetwc.3, fgetws.3, flockfile.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fputwc.3, fputws.3, fseek.3, fseeko.3, ftok.3, fwide.3, getdate.3, getenv.3, getgrent.3, getgrnam.3, gethostid.3, getlogin.3, getnetent.3, getopt.3, getpwent.3, getpwnam.3, getsubopt.3, getutent.3, getwchar.3, grantpt.3, hsearch.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, inet.3, inet_ntop.3, inet_pton.3, insque.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, lockf.3, longjmp.3, lsearch.3, malloc.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memmove.3, memset.3, mktemp.3, mq_close.3, mq_getattr.3, mq_receive.3, mq_send.3, mq_unlink.3, offsetof.3, popen.3, posix_memalign.3, posix_openpt.3, printf.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstacksize.3, pthread_equal.3, pthread_exit.3, pthread_getcpuclockid.3, pthread_kill.3, pthread_self.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_testcancel.3, ptsname.3, putenv.3, puts.3, putwchar.3, qsort.3, raise.3, random.3, readdir.3, regex.3, remove.3, rewinddir.3, seekdir.3, sem_destroy.3, sem_getvalue.3, sem_unlink.3, sem_wait.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, signbit.3, sigpause.3, sigset.3, sigsetops.3, sigwait.3, sleep.3, sockatmark.3, statvfs.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strlen.3, strpbrk.3, strptime.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strxfrm.3, swab.3, sysconf.3, system.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tmpfile.3, towctrans.3, tsearch.3, ttyname.3, tzset.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, wcrtomb.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, fanotify.7, mq_overview.7, nptl.7, sem_overview.7, shm_overview.7, sigevent.7, symlink.7, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-08-08 18:21:22 +02:00
Michael Kerrisk
12faf4493e
pipe.2: CONFORMING TO: add POSIX.1-2008
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-07-24 09:32:04 +02:00
Michael Kerrisk
c77eace5b1
iconv.1, ldd.1, connect.2, dup.2, epoll_ctl.2, eventfd.2, fallocate.2, fcntl.2, getitimer.2, inotify_add_watch.2, open.2, pipe.2, poll.2, sendmmsg.2, set_tid_address.2, shmop.2, signalfd.2, splice.2, syscalls.2, syslog.2, tee.2, vmsplice.2, ether_aton.3, mallopt.3, printf.3, profil.3, charmap.5, proc.5, epoll.7, inotify.7, libc.7, pipe.7, sched.7, socket.7, udplite.7, iconvconfig.8, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-07-08 16:14:48 +02:00
Elie De Brauwer
4fe82a332b
pipe.2: PIPE_BUF is defined in limits.h
...
To make use of PIPE_BUF in an application one should include limits.h.
Adding a reference to this inclusion.
Signed-off-by: Elie De Brauwer <eliedebrauwer@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-07-07 09:07:26 +02:00
Michael Kerrisk
757610599a
pipe.2: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-02-11 09:55:41 +01:00
Michael Kerrisk
aeabba5095
pipe.2: Document the pipe2() O_DIRECT added in Linux 3.4
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-02-11 09:54:44 +01:00
Michael Kerrisk
781c32a311
pipe.2: Reorder pipe2() flags alphabetically
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-02-11 09:18:02 +01:00
Michael Kerrisk
5a6194a405
execve.2, get_robust_list.2, getunwind.2, pipe.2, quotactl.2, clock_getcpuclockid.3, endian.3, fmemopen.3, getgrouplist.3, getservent_r.3, mq_notify.3, qsort.3, rtime.3, mailaddr.7: ffix: replace tabs with white space in code examples
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-01-18 20:47:47 +13:00
Michael Kerrisk
f30b741526
chown.2, clone.2, mmap.2, pipe.2, ftw.3, mq_notify.3: Add "Program source" subheading under EXAMPLE
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-01-05 13:30:41 +13:00
Trevor Bramwell
25505615fe
pipe.2: Fix error in example program
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-12-12 16:16:08 +13:00
Michael Kerrisk
930152530c
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:10 +01:00
Michael Kerrisk
4b72fb6462
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:09 +01:00
Michael Kerrisk
dac8367047
_exit.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clone.2, close.2, connect.2, dup.2, execve.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futimesat.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, idle.2, ioperm.2, iopl.2, ipc.2, kexec_load.2, kill.2, link.2, linkat.2, lookup_dcookie.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mq_getsetattr.2, mremap.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, perf_event_open.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, ptrace.2, read.2, readahead.2, readlinkat.2, rename.2, renameat.2, rmdir.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, setresuid.2, setup.2, socketcall.2, splice.2, stat.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, tee.2, time.2, times.2, tkill.2, umask.2, umount.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, utime.2, utimensat.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, ether_aton.3, euidaccess.3, fexecve.3, ftime.3, futimes.3, getdirentries.3, getdtablesize.3, gethostid.3, getlogin.3, getpt.3, grantpt.3, hsearch.3, inet.3, lsearch.3, mkfifo.3, mkfifoat.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, posix_openpt.3, profil.3, ptsname.3, scandirat.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, shm_open.3, stpcpy.3, termios.3, toascii.3, tsearch.3, ulimit.3, undocumented.3, unlockpt.3, pts.4, charmap.5, locale.5, services.5, feature_test_macros.7, inotify.7, mq_overview.7, pipe.7, pty.7, sem_overview.7, shm_overview.7, unicode.7, utf-8.7: Global fix: remove "Hey Emacs" comment in page source
...
Only certain pages have this; there is no consistency, so
remove it from all pages
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 10:57:08 +01:00
Michael Kerrisk
47297adb6e
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 19:01:36 +01:00
Michael Kerrisk
509b5e8b73
pipe.2: SYNOPSIS: Add "#include <fntl.h>" for O_* constants
...
See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=659750
Reported-by: Salvo Tomaselli <tiposchi@tiscali.it>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-02-14 10:16:21 +13:00
Michael Kerrisk
86b91fdffb
accept.2, clone.2, dup.2, fallocate.2, pipe.2, readahead.2, sched_setaffinity.2, unshare.2, CPU_SET.3, endian.3, euidaccess.3, fexecve.3, getpt.3, getpw.3, getumask.3, getutmp.3, gnu_get_libc_version.3, makedev.3, matherr.3, mbsnrtowcs.3, memfrob.3, pthread_attr_setaffinity_np.3, pthread_getattr_np.3, pthread_setaffinity_np.3, pthread_tryjoin_np.3, tcgetsid.3, wcscasecmp.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wcswidth.3, rtld-audit.7: SYNOPSIS: Add reference to feature_test_macros(7)
...
These pages specify feature test macros in the function
prototypes. Add a reference to feature_test_macros(7),
so that readers are pointed to the information that
feature test macros must be defined before including
*any* header file.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-09-10 07:06:22 +02:00
Michael Kerrisk
6b34fb3f5a
execve.2, pipe.2, tee.2, fmemopen.3, mq_notify.3, qsort.3: Replace use of assert() by code that checks argc
...
See http://bugzilla.kernel.org/show_bug.cgi?id=13569
As noted by Andrey:
The purpose of the assert macro, defined in <assert.h>,
is to provide a tool to check for programming mistakes
or program logic errors. However, the assert macro must
never be used to perform checks for run time errors,
since, with the NDEBUG macro defined, expressions within
the assert macro invocations are not evaluated/checked
for, resulting in behavior that was not originally intended.
...
The pages affected in the core package are
execve(2)
pipe(2)
tee(2)
fmemopen(3)
mq_notify(3)
qsort(3)
Reported-by: Andrey Vihrov <vihrov@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2009-09-28 12:46:19 +02:00
Sam Varshavchik
344689bd06
pipe.2: wfix: SYNPOSIS: add missing word "int"
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-11-04 09:16:00 -05:00
Michael Kerrisk
8c6e516d64
pipe.2: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-11 07:49:42 +02:00
Michael Kerrisk
ef7db4f5b3
inotify_init.2, pipe.2, timerfd_create.2: tfix
...
s/fcntl ()/fcntl (2)/ in xref
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-11 07:49:42 +02:00