2008-08-18 13:00:24 +00:00
|
|
|
.\" Copyright 2008, Linux Foundation, written by Michael Kerrisk
|
|
|
|
.\" <mtk.manpages@gmail.com>
|
|
|
|
.\"
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:01 +00:00
|
|
|
.\" %%%LICENSE_START(VERBATIM)
|
2008-08-18 13:00:24 +00:00
|
|
|
.\" Permission is granted to make and distribute verbatim copies of this
|
|
|
|
.\" manual provided the copyright notice and this permission notice are
|
|
|
|
.\" preserved on all copies.
|
|
|
|
.\"
|
|
|
|
.\" Permission is granted to copy and distribute modified versions of this
|
|
|
|
.\" manual under the conditions for verbatim copying, provided that the
|
|
|
|
.\" entire resulting derived work is distributed under the terms of a
|
|
|
|
.\" permission notice identical to this one.
|
|
|
|
.\"
|
|
|
|
.\" Since the Linux kernel and libraries are constantly changing, this
|
|
|
|
.\" manual page may be incorrect or out-of-date. The author(s) assume no
|
|
|
|
.\" responsibility for errors or omissions, or for damages resulting from
|
|
|
|
.\" the use of the information contained herein. The author(s) may not
|
|
|
|
.\" have taken the same level of care in the production of this manual,
|
|
|
|
.\" which is licensed free of charge, as they might when working
|
|
|
|
.\" professionally.
|
|
|
|
.\"
|
|
|
|
.\" Formatted or processed versions of this manual, if unaccompanied by
|
|
|
|
.\" the source, must acknowledge the copyright and authors of this work.
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:40 +00:00
|
|
|
.\" %%%LICENSE_END
|
2008-08-18 13:00:24 +00:00
|
|
|
.\"
|
getent.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, mtrace.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, add_key.2, adjtimex.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, bpf.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, close_range.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fanotify_init.2, fanotify_mark.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_rm_watch.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_console.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_fslabel.2, ioctl_getfsmap.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, open_by_handle_at.2, openat2.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pidfd_getfd.2, pidfd_open.2, pidfd_send_signal.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, restart_syscall.2, rmdir.2, rt_sigqueueinfo.2, s390_guarded_storage.2, s390_pci_mmio_write.2, s390_runtime_instr.2, s390_sthyi.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, stime.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscall.2, syscalls.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, circleq.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, fileno.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fopencookie.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getutmp.3, getw.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, list.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setsigmask_np.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_mutex_consistent.3, pthread_mutexattr_getpshared.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, readdir_r.3, realpath.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, slist.3, sockatmark.3, sqrt.3, stailq.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tailq.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console_codes.4, dsp56k.4, hpsa.4, initrd.4, loop.4, lp.4, msr.4, random.4, rtc.4, smartpqi.4, veth.4, wavelan.4, acct.5, core.5, elf.5, hosts.5, locale.5, proc.5, resolv.conf.5, rpc.5, slabinfo.5, sysfs.5, tmpfs.5, utmp.5, address_families.7, aio.7, attributes.7, bootparam.7, capabilities.7, cgroups.7, complex.7, ddp.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, hier.7, inode.7, inotify.7, ip.7, ipv6.7, keyrings.7, locale.7, man-pages.7, man.7, math_error.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, numa.7, packet.7, pkeys.7, pthreads.7, queue.7, raw.7, rtnetlink.7, sched.7, session-keyring.7, shm_overview.7, sigevent.7, signal-safety.7, signal.7, sock_diag.7, socket.7, spufs.7, symlink.7, system_data_types.7, tcp.7, time_namespaces.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, user_namespaces.7, vdso.7, vsock.7, x25.7, iconvconfig.8, ld.so.8, ldconfig.8, sln.8, tzselect.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-03-21 23:15:34 +00:00
|
|
|
.TH GETSERVENT_R 3 2021-03-22 "GNU" "Linux Programmer's Manual"
|
2008-08-18 13:00:24 +00:00
|
|
|
.SH NAME
|
|
|
|
getservent_r, getservbyname_r, getservbyport_r \- get
|
|
|
|
service entry (reentrant)
|
|
|
|
.SH SYNOPSIS
|
|
|
|
.nf
|
|
|
|
.B #include <netdb.h>
|
_exit.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, create_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, exit_group.2, fanotify_mark.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, ioctl.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_tty.2, ioperm.2, iopl.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_mempolicy.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shutdown.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, sync.2, sysctl.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, difftime.3, dirfd.3, div.3, dlerror.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, erf.3, erfc.3, err.3, errno.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, infnan.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, newlocale.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, y0.3, dsp56k.4, random.4, rtc.4, st.4, ddp.7, ip.7, ipv6.7, packet.7, rtnetlink.7, socket.7, tcp.7, udp.7, udplite.7, x25.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 15:16:29 +00:00
|
|
|
.PP
|
getservent_r.3: SYNOPSIS: Use 'restrict' in prototypes
glibc uses 'restrict' in getservent_r(), getservbyname_r(),
getservbyport_r().
Let's use it here too.
.../glibc$ grep_glibc_prototype getservent_r
resolv/netdb.h:306:
extern int getservent_r (struct servent *__restrict __result_buf,
char *__restrict __buf, size_t __buflen,
struct servent **__restrict __result);
.../glibc$ grep_glibc_prototype getservbyname_r
resolv/netdb.h:310:
extern int getservbyname_r (const char *__restrict __name,
const char *__restrict __proto,
struct servent *__restrict __result_buf,
char *__restrict __buf, size_t __buflen,
struct servent **__restrict __result);
.../glibc$ grep_glibc_prototype getservbyport_r
resolv/netdb.h:316:
extern int getservbyport_r (int __port, const char *__restrict __proto,
struct servent *__restrict __result_buf,
char *__restrict __buf, size_t __buflen,
struct servent **__restrict __result);
.../glibc$
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-03-05 23:50:45 +00:00
|
|
|
.BI "int getservent_r(struct servent *restrict " result_buf ,
|
|
|
|
.BI " char *restrict " buf ", size_t " buflen ,
|
|
|
|
.BI " struct servent **restrict " result );
|
|
|
|
.BI "int getservbyname_r(const char *restrict " name ,
|
|
|
|
.BI " const char *restrict " proto ,
|
|
|
|
.BI " struct servent *restrict " result_buf ,
|
|
|
|
.BI " char *restrict " buf ", size_t " buflen ,
|
|
|
|
.BI " struct servent **restrict " result );
|
|
|
|
.BI "int getservbyport_r(int " port ,
|
|
|
|
.BI " const char *restrict " proto ,
|
|
|
|
.BI " struct servent *restrict " result_buf ,
|
|
|
|
.BI " char *restrict " buf ", size_t " buflen ,
|
|
|
|
.BI " struct servent **restrict " result );
|
_exit.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, create_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, exit_group.2, fanotify_mark.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, ioctl.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_tty.2, ioperm.2, iopl.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_mempolicy.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shutdown.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, sync.2, sysctl.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, difftime.3, dirfd.3, div.3, dlerror.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, erf.3, erfc.3, err.3, errno.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, infnan.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, newlocale.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, y0.3, dsp56k.4, random.4, rtc.4, st.4, ddp.7, ip.7, ipv6.7, packet.7, rtnetlink.7, socket.7, tcp.7, udp.7, udplite.7, x25.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 15:16:29 +00:00
|
|
|
.PP
|
2008-08-18 13:00:24 +00:00
|
|
|
.fi
|
_exit.2, access.2, acct.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, fsync.2, futimesat.2, getdomainname.2, getgroups.2, gethostname.2, getpagesize.2, getrlimit.2, getsid.2, gettimeofday.2, kill.2, link.2, madvise.2, mincore.2, mkdir.2, mknod.2, nanosleep.2, nice.2, open.2, posix_fadvise.2, pread.2, process_vm_readv.2, readlink.2, readv.2, rename.2, select.2, semop.2, seteuid.2, setpgid.2, setreuid.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, stat.2, stime.2, symlink.2, sync.2, syscall.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, truncate.2, unlink.2, utimensat.2, vfork.2, vhangup.2, wait.2, wait4.2, a64l.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, asin.3, asinh.3, atan.3, atan2.3, atanh.3, atoi.3, bsd_signal.3, cbrt.3, ceil.3, cfree.3, clearenv.3, clock_getcpuclockid.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, daemon.3, dirfd.3, div.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, endian.3, erf.3, erfc.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, ferror.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fopen.3, fpclassify.3, frexp.3, fseeko.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent_r.3, getopt.3, getpass.3, getprotoent_r.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getservent_r.3, getspnam.3, getsubopt.3, getusershell.3, getw.3, grantpt.3, group_member.3, gsignal.3, hypot.3, ilogb.3, inet.3, inet_net_pton.3, initgroups.3, insque.3, isalpha.3, isfdtype.3, isgreater.3, iswblank.3, j0.3, killpg.3, ldexp.3, lgamma.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, malloc.3, mbsnrtowcs.3, memchr.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mq_receive.3, mq_send.3, nan.3, newlocale.3, nextafter.3, nl_langinfo.3, on_exit.3, open_memstream.3, opendir.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, printf.3, profil.3, psignal.3, pthread_attr_setstack.3, pthread_cleanup_push_defer_np.3, pthread_kill.3, pthread_mutex_consistent.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, ptsname.3, putenv.3, putpwent.3, qecvt.3, qsort.3, rand.3, random.3, random_r.3, rcmd.3, readdir_r.3, realpath.3, remainder.3, remquo.3, rint.3, round.3, rpmatch.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setnetgrent.3, siginterrupt.3, signbit.3, significand.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sockatmark.3, sqrt.3, stpcpy.3, stpncpy.3, strdup.3, strerror.3, strfromd.3, strnlen.3, strsep.3, strsignal.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpnam.3, toascii.3, toupper.3, towlower.3, towupper.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, unlocked_stdio.3, unlockpt.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wordexp.3, wprintf.3, y0.3: srcfix: use better macros in SYNOPSIS
Around the text:
"Feature Test Macro Requirements for glibc..."
replace ".in -4n/.in" with ".RS -4/.RE".
The latter form is more idiomatic use of man macros.
The nroff output is unchanged.
Reported-by: G. Branden Robinson <g.branden.robinson@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-09-29 13:06:31 +00:00
|
|
|
.RS -4
|
2008-08-18 13:00:24 +00:00
|
|
|
Feature Test Macro Requirements for glibc (see
|
|
|
|
.BR feature_test_macros (7)):
|
_exit.2, access.2, acct.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, fsync.2, futimesat.2, getdomainname.2, getgroups.2, gethostname.2, getpagesize.2, getrlimit.2, getsid.2, gettimeofday.2, kill.2, link.2, madvise.2, mincore.2, mkdir.2, mknod.2, nanosleep.2, nice.2, open.2, posix_fadvise.2, pread.2, process_vm_readv.2, readlink.2, readv.2, rename.2, select.2, semop.2, seteuid.2, setpgid.2, setreuid.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, stat.2, stime.2, symlink.2, sync.2, syscall.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, truncate.2, unlink.2, utimensat.2, vfork.2, vhangup.2, wait.2, wait4.2, a64l.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, asin.3, asinh.3, atan.3, atan2.3, atanh.3, atoi.3, bsd_signal.3, cbrt.3, ceil.3, cfree.3, clearenv.3, clock_getcpuclockid.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, daemon.3, dirfd.3, div.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, endian.3, erf.3, erfc.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, ferror.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fopen.3, fpclassify.3, frexp.3, fseeko.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent_r.3, getopt.3, getpass.3, getprotoent_r.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getservent_r.3, getspnam.3, getsubopt.3, getusershell.3, getw.3, grantpt.3, group_member.3, gsignal.3, hypot.3, ilogb.3, inet.3, inet_net_pton.3, initgroups.3, insque.3, isalpha.3, isfdtype.3, isgreater.3, iswblank.3, j0.3, killpg.3, ldexp.3, lgamma.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, malloc.3, mbsnrtowcs.3, memchr.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mq_receive.3, mq_send.3, nan.3, newlocale.3, nextafter.3, nl_langinfo.3, on_exit.3, open_memstream.3, opendir.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, printf.3, profil.3, psignal.3, pthread_attr_setstack.3, pthread_cleanup_push_defer_np.3, pthread_kill.3, pthread_mutex_consistent.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, ptsname.3, putenv.3, putpwent.3, qecvt.3, qsort.3, rand.3, random.3, random_r.3, rcmd.3, readdir_r.3, realpath.3, remainder.3, remquo.3, rint.3, round.3, rpmatch.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setnetgrent.3, siginterrupt.3, signbit.3, significand.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sockatmark.3, sqrt.3, stpcpy.3, stpncpy.3, strdup.3, strerror.3, strfromd.3, strnlen.3, strsep.3, strsignal.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpnam.3, toascii.3, toupper.3, towlower.3, towupper.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, unlocked_stdio.3, unlockpt.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wordexp.3, wprintf.3, y0.3: srcfix: use better macros in SYNOPSIS
Around the text:
"Feature Test Macro Requirements for glibc..."
replace ".in -4n/.in" with ".RS -4/.RE".
The latter form is more idiomatic use of man macros.
The nroff output is unchanged.
Reported-by: G. Branden Robinson <g.branden.robinson@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-09-29 13:06:31 +00:00
|
|
|
.RE
|
_exit.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, create_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, exit_group.2, fanotify_mark.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, ioctl.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_tty.2, ioperm.2, iopl.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_mempolicy.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shutdown.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, sync.2, sysctl.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, difftime.3, dirfd.3, div.3, dlerror.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, erf.3, erfc.3, err.3, errno.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, infnan.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, newlocale.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, y0.3, dsp56k.4, random.4, rtc.4, st.4, ddp.7, ip.7, ipv6.7, packet.7, rtnetlink.7, socket.7, tcp.7, udp.7, udplite.7, x25.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 15:16:29 +00:00
|
|
|
.PP
|
2008-08-18 13:00:24 +00:00
|
|
|
.BR getservent_r (),
|
|
|
|
.BR getservbyname_r (),
|
|
|
|
.BR getservbyport_r ():
|
2021-01-04 22:18:08 +00:00
|
|
|
.nf
|
getgroups.2, gettimeofday.2, mincore.2, readv.2, stime.2, wait4.2, addseverity.3, adjtime.3, cfree.3, dysize.3, fgetgrent.3, fgetpwent.3, futimes.3, getdirentries.3, getgrent_r.3, getgrouplist.3, getmntent.3, getnetent_r.3, getprotoent_r.3, getpwent_r.3, getrpcent_r.3, getservent_r.3, getspnam.3, gsignal.3, initgroups.3, mkdtemp.3, on_exit.3, perror.3, psignal.3, putpwent.3, rcmd.3, rpmatch.3, setbuf.3, setnetgrent.3, sigvec.3, strsep.3, syslog.3, tempnam.3, termios.3, timegm.3, timeradd.3: Update FTM requirements (_DEFAULT_SOURCE)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-02-09 11:52:57 +00:00
|
|
|
Since glibc 2.19:
|
|
|
|
_DEFAULT_SOURCE
|
|
|
|
Glibc 2.19 and earlier:
|
|
|
|
_BSD_SOURCE || _SVID_SOURCE
|
2021-01-04 22:18:08 +00:00
|
|
|
.fi
|
2008-08-18 13:00:24 +00:00
|
|
|
.SH DESCRIPTION
|
|
|
|
The
|
|
|
|
.BR getservent_r (),
|
|
|
|
.BR getservbyname_r (),
|
|
|
|
and
|
|
|
|
.BR getservbyport_r ()
|
|
|
|
functions are the reentrant equivalents of, respectively,
|
|
|
|
.BR getservent (3),
|
|
|
|
.BR getservbyname (3),
|
|
|
|
and
|
|
|
|
.BR getservbyport (3).
|
|
|
|
They differ in the way that the
|
|
|
|
.I servent
|
|
|
|
structure is returned,
|
|
|
|
and in the function calling signature and return value.
|
|
|
|
This manual page describes just the differences from
|
getgrent_r.3, gethostbyname.3, getmntent.3, getnetent_r.3, getprotoent_r.3, getpwent_r.3, getrpcent_r.3, getservent_r.3, getspnam.3: Global fix: s/non-reentrant/nonrentrant/
The tendency in English, as prescribed in style guides like
Chicago MoS, is towards removing hyphens after prefixes
like "non-" etc.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-01-16 16:55:51 +00:00
|
|
|
the nonreentrant functions.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2008-08-18 13:00:24 +00:00
|
|
|
Instead of returning a pointer to a statically allocated
|
|
|
|
.I servent
|
|
|
|
structure as the function result,
|
|
|
|
these functions copy the structure into the location pointed to by
|
|
|
|
.IR result_buf .
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2008-08-18 13:00:24 +00:00
|
|
|
The
|
|
|
|
.I buf
|
|
|
|
array is used to store the string fields pointed to by the returned
|
|
|
|
.I servent
|
|
|
|
structure.
|
getgrent_r.3, gethostbyname.3, getmntent.3, getnetent_r.3, getprotoent_r.3, getpwent_r.3, getrpcent_r.3, getservent_r.3, getspnam.3: Global fix: s/non-reentrant/nonrentrant/
The tendency in English, as prescribed in style guides like
Chicago MoS, is towards removing hyphens after prefixes
like "non-" etc.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-01-16 16:55:51 +00:00
|
|
|
(The nonreentrant functions allocate these strings in static storage.)
|
2008-08-18 13:00:24 +00:00
|
|
|
The size of this array is specified in
|
|
|
|
.IR buflen .
|
|
|
|
If
|
|
|
|
.I buf
|
|
|
|
is too small, the call fails with the error
|
|
|
|
.BR ERANGE ,
|
|
|
|
and the caller must try again with a larger buffer.
|
|
|
|
(A buffer of length 1024 bytes should be sufficient for most applications.)
|
|
|
|
.\" I can find no information on the required/recommended buffer size;
|
getgrent_r.3, gethostbyname.3, getmntent.3, getnetent_r.3, getprotoent_r.3, getpwent_r.3, getrpcent_r.3, getservent_r.3, getspnam.3: Global fix: s/non-reentrant/nonrentrant/
The tendency in English, as prescribed in style guides like
Chicago MoS, is towards removing hyphens after prefixes
like "non-" etc.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-01-16 16:55:51 +00:00
|
|
|
.\" the nonreentrant functions use a 1024 byte buffer -- mtk.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2008-08-18 13:00:24 +00:00
|
|
|
If the function call successfully obtains a service record, then
|
|
|
|
.I *result
|
|
|
|
is set pointing to
|
|
|
|
.IR result_buf ;
|
|
|
|
otherwise,
|
|
|
|
.I *result
|
|
|
|
is set to NULL.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH RETURN VALUE
|
2008-08-18 13:00:24 +00:00
|
|
|
On success, these functions return 0.
|
2010-09-10 05:49:10 +00:00
|
|
|
On error, they return one of the positive error numbers listed in errors.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2008-08-18 13:00:24 +00:00
|
|
|
On error, record not found
|
|
|
|
.RB ( getservbyname_r (),
|
|
|
|
.BR getservbyport_r ()),
|
|
|
|
or end of input
|
|
|
|
.RB ( getservent_r ())
|
|
|
|
.I result
|
|
|
|
is set to NULL.
|
|
|
|
.SH ERRORS
|
|
|
|
.TP
|
|
|
|
.B ENOENT
|
|
|
|
.RB ( getservent_r ())
|
|
|
|
No more records in database.
|
|
|
|
.TP
|
|
|
|
.B ERANGE
|
|
|
|
.I buf
|
|
|
|
is too small.
|
|
|
|
Try again with a larger buffer
|
|
|
|
(and increased
|
|
|
|
.IR buflen ).
|
2015-06-11 02:04:26 +00:00
|
|
|
.SH ATTRIBUTES
|
|
|
|
For an explanation of the terms used in this section, see
|
|
|
|
.BR attributes (7).
|
ctime.3, error.3, getmntent.3, getnetent_r.3, getrpcent_r.3, getservent_r.3, pthread_attr_init.3, pthread_getattr_np.3, pthread_tryjoin_np.3, rpc.3, setaliasent.3, setenv.3, unlocked_stdio.3: srcfix: Eliminate some groff warnings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-06-24 15:19:21 +00:00
|
|
|
.ad l
|
Various pages: Improve formatting in ATTRIBUTES
Make the formatting more consistent inside the tables in the
ATTRIBUTES sections. Make the source code more uniform; in
particular, eliminate the use of custom tweaks using
'lbwNN'/'lwNN' and .br macros. In addition, ensure that
hyphenation and text justification do not occur inside the tables.
This is a script-driven edit:
[[
PAGE_LIST=$(git grep -l 'SH ATTRIBUTES' man[23])
# Strip out any preexisting .sp/.br/.ad macros
sed -i '/SH ATTR/,/^\.SH/{/^\.sp/d; /^\.br/d; /\.ad/d}' $PAGE_LIST
# Eliminate any use of 'wNN' in tables; default first column
# to fill unused space
sed -i '/SH ATTR/,/^\.SH/s/lbw[0-9]*/lb/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/lw[0-9]*/l/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/^lb /lbx /' $PAGE_LIST
# Nest the tables inside ".ad l"+".nh" and ".hy"+".ad"+".sp 1"
# ".ad l" ==> no right justification of text in table cells
# ".nh" ==> No hyphenation in table cells
# ".sp 1" ==> ensure a blank line before the next section heading
sed -i '/SH ATTR/,/^\.SH/{/\.TS/i.ad l\n.nh
}' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/{/\.TE/a.hy\n.ad\n.sp 1
}' $PAGE_LIST
# In a few of the tables, the third column has a lot of text, so
# make that column wide (rather than the first column)
sed -i '/^lbx/{s/lbx/lb/;s/lb$/lbx/}' \
man3/bindresvport.3 \
man3/fmtmsg.3 man3/gethostbyname.3 man3/getlogin.3 \
man3/getnetent.3 man3/getprotoent.3 man3/getpwent.3 \
man3/getservent.3 man3/getspnam.3 man3/getutent.3 man3/glob.3 \
man3/login.3 \
man3/setnetgrent.3 \
man3/wordexp.3
]]
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-06 09:52:04 +00:00
|
|
|
.nh
|
2015-06-11 02:04:26 +00:00
|
|
|
.TS
|
|
|
|
allbox;
|
Various pages: Improve formatting in ATTRIBUTES
Make the formatting more consistent inside the tables in the
ATTRIBUTES sections. Make the source code more uniform; in
particular, eliminate the use of custom tweaks using
'lbwNN'/'lwNN' and .br macros. In addition, ensure that
hyphenation and text justification do not occur inside the tables.
This is a script-driven edit:
[[
PAGE_LIST=$(git grep -l 'SH ATTRIBUTES' man[23])
# Strip out any preexisting .sp/.br/.ad macros
sed -i '/SH ATTR/,/^\.SH/{/^\.sp/d; /^\.br/d; /\.ad/d}' $PAGE_LIST
# Eliminate any use of 'wNN' in tables; default first column
# to fill unused space
sed -i '/SH ATTR/,/^\.SH/s/lbw[0-9]*/lb/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/lw[0-9]*/l/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/^lb /lbx /' $PAGE_LIST
# Nest the tables inside ".ad l"+".nh" and ".hy"+".ad"+".sp 1"
# ".ad l" ==> no right justification of text in table cells
# ".nh" ==> No hyphenation in table cells
# ".sp 1" ==> ensure a blank line before the next section heading
sed -i '/SH ATTR/,/^\.SH/{/\.TS/i.ad l\n.nh
}' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/{/\.TE/a.hy\n.ad\n.sp 1
}' $PAGE_LIST
# In a few of the tables, the third column has a lot of text, so
# make that column wide (rather than the first column)
sed -i '/^lbx/{s/lbx/lb/;s/lb$/lbx/}' \
man3/bindresvport.3 \
man3/fmtmsg.3 man3/gethostbyname.3 man3/getlogin.3 \
man3/getnetent.3 man3/getprotoent.3 man3/getpwent.3 \
man3/getservent.3 man3/getspnam.3 man3/getutent.3 man3/glob.3 \
man3/login.3 \
man3/setnetgrent.3 \
man3/wordexp.3
]]
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-06 09:52:04 +00:00
|
|
|
lbx lb lb
|
2015-06-11 02:04:26 +00:00
|
|
|
l l l.
|
|
|
|
Interface Attribute Value
|
|
|
|
T{
|
|
|
|
.BR getservent_r (),
|
|
|
|
.BR getservbyname_r (),
|
|
|
|
.BR getservbyport_r ()
|
|
|
|
T} Thread safety MT-Safe locale
|
|
|
|
.TE
|
Various pages: Improve formatting in ATTRIBUTES
Make the formatting more consistent inside the tables in the
ATTRIBUTES sections. Make the source code more uniform; in
particular, eliminate the use of custom tweaks using
'lbwNN'/'lwNN' and .br macros. In addition, ensure that
hyphenation and text justification do not occur inside the tables.
This is a script-driven edit:
[[
PAGE_LIST=$(git grep -l 'SH ATTRIBUTES' man[23])
# Strip out any preexisting .sp/.br/.ad macros
sed -i '/SH ATTR/,/^\.SH/{/^\.sp/d; /^\.br/d; /\.ad/d}' $PAGE_LIST
# Eliminate any use of 'wNN' in tables; default first column
# to fill unused space
sed -i '/SH ATTR/,/^\.SH/s/lbw[0-9]*/lb/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/lw[0-9]*/l/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/^lb /lbx /' $PAGE_LIST
# Nest the tables inside ".ad l"+".nh" and ".hy"+".ad"+".sp 1"
# ".ad l" ==> no right justification of text in table cells
# ".nh" ==> No hyphenation in table cells
# ".sp 1" ==> ensure a blank line before the next section heading
sed -i '/SH ATTR/,/^\.SH/{/\.TS/i.ad l\n.nh
}' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/{/\.TE/a.hy\n.ad\n.sp 1
}' $PAGE_LIST
# In a few of the tables, the third column has a lot of text, so
# make that column wide (rather than the first column)
sed -i '/^lbx/{s/lbx/lb/;s/lb$/lbx/}' \
man3/bindresvport.3 \
man3/fmtmsg.3 man3/gethostbyname.3 man3/getlogin.3 \
man3/getnetent.3 man3/getprotoent.3 man3/getpwent.3 \
man3/getservent.3 man3/getspnam.3 man3/getutent.3 man3/glob.3 \
man3/login.3 \
man3/setnetgrent.3 \
man3/wordexp.3
]]
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-06 09:52:04 +00:00
|
|
|
.hy
|
ctime.3, error.3, getmntent.3, getnetent_r.3, getrpcent_r.3, getservent_r.3, pthread_attr_init.3, pthread_getattr_np.3, pthread_tryjoin_np.3, rpc.3, setaliasent.3, setenv.3, unlocked_stdio.3: srcfix: Eliminate some groff warnings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-06-24 15:19:21 +00:00
|
|
|
.ad
|
Various pages: Improve formatting in ATTRIBUTES
Make the formatting more consistent inside the tables in the
ATTRIBUTES sections. Make the source code more uniform; in
particular, eliminate the use of custom tweaks using
'lbwNN'/'lwNN' and .br macros. In addition, ensure that
hyphenation and text justification do not occur inside the tables.
This is a script-driven edit:
[[
PAGE_LIST=$(git grep -l 'SH ATTRIBUTES' man[23])
# Strip out any preexisting .sp/.br/.ad macros
sed -i '/SH ATTR/,/^\.SH/{/^\.sp/d; /^\.br/d; /\.ad/d}' $PAGE_LIST
# Eliminate any use of 'wNN' in tables; default first column
# to fill unused space
sed -i '/SH ATTR/,/^\.SH/s/lbw[0-9]*/lb/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/lw[0-9]*/l/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/^lb /lbx /' $PAGE_LIST
# Nest the tables inside ".ad l"+".nh" and ".hy"+".ad"+".sp 1"
# ".ad l" ==> no right justification of text in table cells
# ".nh" ==> No hyphenation in table cells
# ".sp 1" ==> ensure a blank line before the next section heading
sed -i '/SH ATTR/,/^\.SH/{/\.TS/i.ad l\n.nh
}' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/{/\.TE/a.hy\n.ad\n.sp 1
}' $PAGE_LIST
# In a few of the tables, the third column has a lot of text, so
# make that column wide (rather than the first column)
sed -i '/^lbx/{s/lbx/lb/;s/lb$/lbx/}' \
man3/bindresvport.3 \
man3/fmtmsg.3 man3/gethostbyname.3 man3/getlogin.3 \
man3/getnetent.3 man3/getprotoent.3 man3/getpwent.3 \
man3/getservent.3 man3/getspnam.3 man3/getutent.3 man3/glob.3 \
man3/login.3 \
man3/setnetgrent.3 \
man3/wordexp.3
]]
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-06 09:52:04 +00:00
|
|
|
.sp 1
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH CONFORMING TO
|
2008-08-18 13:00:24 +00:00
|
|
|
These functions are GNU extensions.
|
|
|
|
Functions with similar names exist on some other systems,
|
|
|
|
though typically with different calling signatures.
|
2020-05-21 08:00:37 +00:00
|
|
|
.SH EXAMPLES
|
2008-08-18 13:00:24 +00:00
|
|
|
The program below uses
|
|
|
|
.BR getservbyport_r ()
|
|
|
|
to retrieve the service record for the port and protocol named
|
|
|
|
in its first command-line argument.
|
|
|
|
If a third (integer) command-line argument is supplied,
|
|
|
|
it is used as the initial value for
|
|
|
|
.IR buflen ;
|
|
|
|
if
|
|
|
|
.BR getservbyport_r ()
|
|
|
|
fails with the error
|
|
|
|
.BR ERANGE ,
|
|
|
|
the program retries with larger buffer sizes.
|
|
|
|
The following shell session shows a couple of sample runs:
|
ioctl_console.2, ioctl_getfsmap.2, ioctl_iflags.2, ioctl_list.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, link.2, mmap.2, modify_ldt.2, msgctl.2, poll.2, query_module.2, quotactl.2, recv.2, recvmmsg.2, sched_setscheduler.2, seccomp.2, select.2, semctl.2, semop.2, send.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sysinfo.2, timer_create.2, timerfd_create.2, uname.2, unshare.2, userfaultfd.2, ustat.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, backtrace.3, bswap.3, btree.3, clock_getcpuclockid.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, fmemopen.3, fopencookie.3, frexp.3, fts.3, ftw.3, getaddrinfo.3, getaddrinfo_a.3, getcontext.3, getgrouplist.3, getifaddrs.3, getipnodebyname.3, getnameinfo.3, getopt.3, getprotoent_r.3, getpwent_r.3, getrpcent.3, getservent_r.3, getttyent.3, getumask.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, inet.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallopt.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mtrace.3, newlocale.3, ntp_gettime.3, offsetof.3, posix_openpt.3, printf.3, pthread_setname_np.3, pthread_setschedparam.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, sigvec.3, stdarg.3, strcat.3, strcpy.3, strftime.3, strtol.3, toupper.3, ttyslot.3, fuse.4, loop.4, st.4, elf.5, cgroup_namespaces.7, cgroups.7, feature_test_macros.7, inode.7, inotify.7, keyrings.7, man-pages.7, math_error.7, mount_namespaces.7, mq_overview.7, pthreads.7, sched.7, session-keyring.7, udplite.7, unix.7, vdso.7: Use consistent markup for code snippets
The preferred form is
.PP/.IP
.in +4n
.EX
<code>
.EE
.in
.PP/.IP
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:37:55 +00:00
|
|
|
.PP
|
2008-08-18 13:00:24 +00:00
|
|
|
.in +4n
|
ioctl_console.2, ioctl_getfsmap.2, ioctl_iflags.2, ioctl_list.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, link.2, mmap.2, modify_ldt.2, msgctl.2, poll.2, query_module.2, quotactl.2, recv.2, recvmmsg.2, sched_setscheduler.2, seccomp.2, select.2, semctl.2, semop.2, send.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sysinfo.2, timer_create.2, timerfd_create.2, uname.2, unshare.2, userfaultfd.2, ustat.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, backtrace.3, bswap.3, btree.3, clock_getcpuclockid.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, fmemopen.3, fopencookie.3, frexp.3, fts.3, ftw.3, getaddrinfo.3, getaddrinfo_a.3, getcontext.3, getgrouplist.3, getifaddrs.3, getipnodebyname.3, getnameinfo.3, getopt.3, getprotoent_r.3, getpwent_r.3, getrpcent.3, getservent_r.3, getttyent.3, getumask.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, inet.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallopt.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mtrace.3, newlocale.3, ntp_gettime.3, offsetof.3, posix_openpt.3, printf.3, pthread_setname_np.3, pthread_setschedparam.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, sigvec.3, stdarg.3, strcat.3, strcpy.3, strftime.3, strtol.3, toupper.3, ttyslot.3, fuse.4, loop.4, st.4, elf.5, cgroup_namespaces.7, cgroups.7, feature_test_macros.7, inode.7, inotify.7, keyrings.7, man-pages.7, math_error.7, mount_namespaces.7, mq_overview.7, pthreads.7, sched.7, session-keyring.7, udplite.7, unix.7, vdso.7: Use consistent markup for code snippets
The preferred form is
.PP/.IP
.in +4n
.EX
<code>
.EE
.in
.PP/.IP
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:37:55 +00:00
|
|
|
.EX
|
eventfd.2, execve.2, getdents.2, ioprio_set.2, mprotect.2, signalfd.2, timerfd_create.2, wait.2, backtrace.3, clock_getcpuclockid.3, end.3, fmemopen.3, fopencookie.3, frexp.3, getdate.3, getgrouplist.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, inet.3, inet_pton.3, makecontext.3, malloc.3, matherr.3, offsetof.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, sem_wait.3, strftime.3, strtok.3, strtol.3, core.5, proc.5, cpuset.7, mq_overview.7: Global fix: Format user input in shell sessions in boldface
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-28 15:37:22 +00:00
|
|
|
.RB "$" " ./a.out 7 tcp 1"
|
2008-08-18 13:00:24 +00:00
|
|
|
ERANGE! Retrying with larger buffer
|
|
|
|
getservbyport_r() returned: 0 (success) (buflen=87)
|
|
|
|
s_name=echo; s_proto=tcp; s_port=7; aliases=
|
eventfd.2, execve.2, getdents.2, ioprio_set.2, mprotect.2, signalfd.2, timerfd_create.2, wait.2, backtrace.3, clock_getcpuclockid.3, end.3, fmemopen.3, fopencookie.3, frexp.3, getdate.3, getgrouplist.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, inet.3, inet_pton.3, makecontext.3, malloc.3, matherr.3, offsetof.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, sem_wait.3, strftime.3, strtok.3, strtol.3, core.5, proc.5, cpuset.7, mq_overview.7: Global fix: Format user input in shell sessions in boldface
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-28 15:37:22 +00:00
|
|
|
.RB "$" " ./a.out 77777 tcp"
|
2008-08-18 13:00:24 +00:00
|
|
|
getservbyport_r() returned: 0 (success) (buflen=1024)
|
|
|
|
Call failed/record not found
|
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:52:46 +00:00
|
|
|
.EE
|
2008-08-18 13:00:24 +00:00
|
|
|
.in
|
eventfd.2, getdents.2, mprotect.2, signalfd.2, timerfd_create.2, wait.2, backtrace.3, clock_getcpuclockid.3, end.3, fmemopen.3, fopencookie.3, getdate.3, getgrouplist.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, inet.3, inet_pton.3, makecontext.3, matherr.3, offsetof.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, sem_wait.3, strtol.3, core.5: global fix: Add ".SS Program source" to EXAMPLE
Add ".SS Program source" to clearly distinguish shell session and
descriptive text from actual program code.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-28 15:51:05 +00:00
|
|
|
.SS Program source
|
eventfd.2, getdents.2, mprotect.2, signalfd.2, timerfd_create.2, wait.2, backtrace.3, clock_getcpuclockid.3, end.3, fmemopen.3, fopencookie.3, frexp.3, getaddrinfo.3, getdate.3, getgrouplist.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, inet.3, inet_pton.3, makecontext.3, matherr.3, offsetof.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, sem_wait.3, strftime.3, strtok.3, strtol.3, core.5: srcfix
s/\.R " "/\\\&/ as a way of getting a blank line after a .SS heading.
(Suggested by Sam Varshavchik <mrsam@courier-mta.com>)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-11-05 01:42:45 +00:00
|
|
|
\&
|
memusage.1, clone.2, eventfd.2, futex.2, getdents.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, keyctl.2, mmap.2, mprotect.2, msgop.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, setns.2, tee.2, timer_create.2, timerfd_create.2, unshare.2, userfaultfd.2, wait.2, __ppc_get_timebase.3, backtrace.3, bswap.3, clock_getcpuclockid.3, dl_iterate_phdr.3, dlinfo.3, dlopen.3, duplocale.3, end.3, endian.3, fmemopen.3, fopencookie.3, frexp.3, ftw.3, getdate.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, mq_getattr.3, mq_notify.3, newlocale.3, offsetof.3, posix_spawn.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, scandir.3, sem_wait.3, strcat.3, strftime.3, strtok.3, strtol.3, strverscmp.3, loop.4, core.5, aio.7, fanotify.7, feature_test_macros.7, inotify.7, pkeys.7, unix.7, user_namespaces.7: Use .EX/.EE for EXAMPLE programs
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 08:44:33 +00:00
|
|
|
.EX
|
2008-08-18 13:00:24 +00:00
|
|
|
#define _GNU_SOURCE
|
|
|
|
#include <ctype.h>
|
|
|
|
#include <netdb.h>
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <errno.h>
|
|
|
|
#include <string.h>
|
|
|
|
|
|
|
|
#define MAX_BUF 10000
|
|
|
|
|
|
|
|
int
|
|
|
|
main(int argc, char *argv[])
|
|
|
|
{
|
|
|
|
int buflen, erange_cnt, port, s;
|
|
|
|
struct servent result_buf;
|
|
|
|
struct servent *result;
|
|
|
|
char buf[MAX_BUF];
|
|
|
|
char *protop;
|
|
|
|
|
|
|
|
if (argc < 3) {
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("Usage: %s port\-num proto\-name [buflen]\en", argv[0]);
|
2008-08-18 13:00:24 +00:00
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
|
|
|
|
port = htons(atoi(argv[1]));
|
|
|
|
protop = (strcmp(argv[2], "null") == 0 ||
|
execve.2, get_robust_list.2, getunwind.2, pipe.2, quotactl.2, clock_getcpuclockid.3, endian.3, fmemopen.3, getgrouplist.3, getservent_r.3, mq_notify.3, qsort.3, rtime.3, mailaddr.7: ffix: replace tabs with white space in code examples
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-01-18 07:45:45 +00:00
|
|
|
strcmp(argv[2], "NULL") == 0) ? NULL : argv[2];
|
2008-08-18 13:00:24 +00:00
|
|
|
|
|
|
|
buflen = 1024;
|
|
|
|
if (argc > 3)
|
|
|
|
buflen = atoi(argv[3]);
|
|
|
|
|
|
|
|
if (buflen > MAX_BUF) {
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("Exceeded buffer limit (%d)\en", MAX_BUF);
|
2008-08-18 13:00:24 +00:00
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
|
|
|
|
erange_cnt = 0;
|
|
|
|
do {
|
|
|
|
s = getservbyport_r(port, protop, &result_buf,
|
|
|
|
buf, buflen, &result);
|
|
|
|
if (s == ERANGE) {
|
|
|
|
if (erange_cnt == 0)
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("ERANGE! Retrying with larger buffer\en");
|
2008-08-18 13:00:24 +00:00
|
|
|
erange_cnt++;
|
|
|
|
|
|
|
|
/* Increment a byte at a time so we can see exactly
|
ioctl_ns.2, keyctl.2, memfd_create.2, pidfd_send_signal.2, poll.2, seccomp.2, signalfd.2, timerfd_create.2, unshare.2, dlinfo.3, duplocale.3, fopencookie.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, insque.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_create.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, qsort.3, sem_wait.3, core.5, elf.5, aio.7, epoll.7, pkeys.7, system_data_types.7, unix.7: Use periods more consistently inside code comments
In general, complete sentences in free-standing comments
should be terminated by periods.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-12-27 10:42:50 +00:00
|
|
|
what size buffer was required. */
|
2008-08-18 13:00:24 +00:00
|
|
|
|
|
|
|
buflen++;
|
|
|
|
|
|
|
|
if (buflen > MAX_BUF) {
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("Exceeded buffer limit (%d)\en", MAX_BUF);
|
2008-08-18 13:00:24 +00:00
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} while (s == ERANGE);
|
|
|
|
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("getservbyport_r() returned: %s (buflen=%d)\en",
|
2008-08-18 13:00:24 +00:00
|
|
|
(s == 0) ? "0 (success)" : (s == ENOENT) ? "ENOENT" :
|
|
|
|
strerror(s), buflen);
|
|
|
|
|
|
|
|
if (s != 0 || result == NULL) {
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("Call failed/record not found\en");
|
2008-08-18 13:00:24 +00:00
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
|
|
|
|
printf("s_name=%s; s_proto=%s; s_port=%d; aliases=",
|
|
|
|
result_buf.s_name, result_buf.s_proto,
|
|
|
|
ntohs(result_buf.s_port));
|
sprof.1, eventfd.2, execve.2, futex.2, getdents.2, mprotect.2, open_by_handle_at.2, recvmmsg.2, sched_setaffinity.2, CPU_SET.3, backtrace.3, bsearch.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, envz_add.3, fopencookie.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrent_r.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, hsearch.3, mallinfo.3, malloc_info.3, mbstowcs.3, mtrace.3, pthread_create.3, pthread_getcpuclockid.3, pthread_setaffinity_np.3, qsort.3, rand.3, strcat.3, strtok.3, tsearch.3, wordexp.3, core.5, aio.7, inotify.7, sock_diag.7, unix.7, user_namespaces.7: Use C99 style to declare loop counter variables
Rather than:
sometype x;
for (x = ....; ...)
use
for (sometype x = ...; ...)
This brings the declaration and use closer together (thus aiding
readability) and also clearly indicates the scope of the loop
counter variable.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-09-05 15:18:10 +00:00
|
|
|
for (char **p = result_buf.s_aliases; *p != NULL; p++)
|
2008-08-18 13:00:24 +00:00
|
|
|
printf("%s ", *p);
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("\en");
|
2008-08-18 13:00:24 +00:00
|
|
|
|
|
|
|
exit(EXIT_SUCCESS);
|
|
|
|
}
|
memusage.1, clone.2, eventfd.2, futex.2, getdents.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, keyctl.2, mmap.2, mprotect.2, msgop.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, setns.2, tee.2, timer_create.2, timerfd_create.2, unshare.2, userfaultfd.2, wait.2, __ppc_get_timebase.3, backtrace.3, bswap.3, clock_getcpuclockid.3, dl_iterate_phdr.3, dlinfo.3, dlopen.3, duplocale.3, end.3, endian.3, fmemopen.3, fopencookie.3, frexp.3, ftw.3, getdate.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, mq_getattr.3, mq_notify.3, newlocale.3, offsetof.3, posix_spawn.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, scandir.3, sem_wait.3, strcat.3, strftime.3, strtok.3, strtol.3, strverscmp.3, loop.4, core.5, aio.7, fanotify.7, feature_test_macros.7, inotify.7, pkeys.7, unix.7, user_namespaces.7: Use .EX/.EE for EXAMPLE programs
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 08:44:33 +00:00
|
|
|
.EE
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH SEE ALSO
|
2008-08-18 13:00:24 +00:00
|
|
|
.BR getservent (3),
|
|
|
|
.BR services (5)
|