2012-04-17 20:32:35 +00:00
|
|
|
.\" Copyright (c) 2012 by Michael Kerrisk <mtk.manpages@gmail.com>
|
|
|
|
.\"
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:01 +00:00
|
|
|
.\" %%%LICENSE_START(VERBATIM)
|
2012-04-17 20:32:35 +00:00
|
|
|
.\" Permission is granted to make and distribute verbatim copies of this
|
|
|
|
.\" manual provided the copyright notice and this permission notice are
|
|
|
|
.\" preserved on all copies.
|
|
|
|
.\"
|
|
|
|
.\" Permission is granted to copy and distribute modified versions of this
|
|
|
|
.\" manual under the conditions for verbatim copying, provided that the
|
|
|
|
.\" entire resulting derived work is distributed under the terms of a
|
|
|
|
.\" permission notice identical to this one.
|
|
|
|
.\"
|
|
|
|
.\" Since the Linux kernel and libraries are constantly changing, this
|
|
|
|
.\" manual page may be incorrect or out-of-date. The author(s) assume no
|
|
|
|
.\" responsibility for errors or omissions, or for damages resulting from
|
|
|
|
.\" the use of the information contained herein. The author(s) may not
|
|
|
|
.\" have taken the same level of care in the production of this manual,
|
|
|
|
.\" which is licensed free of charge, as they might when working
|
|
|
|
.\" professionally.
|
|
|
|
.\"
|
|
|
|
.\" Formatted or processed versions of this manual, if unaccompanied by
|
|
|
|
.\" the source, must acknowledge the copyright and authors of this work.
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:40 +00:00
|
|
|
.\" %%%LICENSE_END
|
2012-04-17 20:32:35 +00:00
|
|
|
.\"
|
getent.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, mtrace.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, add_key.2, adjtimex.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, bpf.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, close_range.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fanotify_init.2, fanotify_mark.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_rm_watch.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_console.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_fslabel.2, ioctl_getfsmap.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, open_by_handle_at.2, openat2.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pidfd_getfd.2, pidfd_open.2, pidfd_send_signal.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, restart_syscall.2, rmdir.2, rt_sigqueueinfo.2, s390_guarded_storage.2, s390_pci_mmio_write.2, s390_runtime_instr.2, s390_sthyi.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, stime.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscall.2, syscalls.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, circleq.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, fileno.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fopencookie.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getutmp.3, getw.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, list.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setsigmask_np.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_mutex_consistent.3, pthread_mutexattr_getpshared.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, readdir_r.3, realpath.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, slist.3, sockatmark.3, sqrt.3, stailq.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tailq.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console_codes.4, dsp56k.4, hpsa.4, initrd.4, loop.4, lp.4, msr.4, random.4, rtc.4, smartpqi.4, veth.4, wavelan.4, acct.5, core.5, elf.5, hosts.5, locale.5, proc.5, resolv.conf.5, rpc.5, slabinfo.5, sysfs.5, tmpfs.5, utmp.5, address_families.7, aio.7, attributes.7, bootparam.7, capabilities.7, cgroups.7, complex.7, ddp.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, hier.7, inode.7, inotify.7, ip.7, ipv6.7, keyrings.7, locale.7, man-pages.7, man.7, math_error.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, numa.7, packet.7, pkeys.7, pthreads.7, queue.7, raw.7, rtnetlink.7, sched.7, session-keyring.7, shm_overview.7, sigevent.7, signal-safety.7, signal.7, sock_diag.7, socket.7, spufs.7, symlink.7, system_data_types.7, tcp.7, time_namespaces.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, user_namespaces.7, vdso.7, vsock.7, x25.7, iconvconfig.8, ld.so.8, ldconfig.8, sln.8, tzselect.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-03-21 23:15:34 +00:00
|
|
|
.TH MCHECK 3 2021-03-22 "GNU" "Linux Programmer's Manual"
|
2012-04-17 20:32:35 +00:00
|
|
|
.SH NAME
|
2012-05-03 15:55:19 +00:00
|
|
|
mcheck, mcheck_check_all, mcheck_pedantic, mprobe \- heap consistency checking
|
2012-04-17 20:32:35 +00:00
|
|
|
.SH SYNOPSIS
|
|
|
|
.nf
|
|
|
|
.B #include <mcheck.h>
|
_exit.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, create_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, exit_group.2, fanotify_mark.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, ioctl.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_tty.2, ioperm.2, iopl.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_mempolicy.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shutdown.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, sync.2, sysctl.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, difftime.3, dirfd.3, div.3, dlerror.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, erf.3, erfc.3, err.3, errno.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, infnan.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, newlocale.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, y0.3, dsp56k.4, random.4, rtc.4, st.4, ddp.7, ip.7, ipv6.7, packet.7, rtnetlink.7, socket.7, tcp.7, udp.7, udplite.7, x25.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 15:16:29 +00:00
|
|
|
.PP
|
2012-04-17 20:32:35 +00:00
|
|
|
.BI "int mcheck(void (*" abortfunc ")(enum mcheck_status " mstatus ));
|
|
|
|
.BI "int mcheck_pedantic(void (*" abortfunc ")(enum mcheck_status " mstatus ));
|
|
|
|
.B void mcheck_check_all(void);
|
_exit.2, accept.2, chmod.2, dup.2, getgroups.2, keyctl.2, link.2, mkdir.2, mknod.2, pipe.2, poll.2, reboot.2, rename.2, select.2, select_tut.2, stat.2, symlink.2, unlink.2, __ppc_get_timebase.3, abs.3, bzero.3, crypt.3, dbopen.3, dl_iterate_phdr.3, dlinfo.3, dlsym.3, duplocale.3, encrypt.3, err.3, ffs.3, fpurge.3, ftw.3, getdate.3, gethostbyname.3, getlogin.3, getmntent.3, getpwent_r.3, getpwnam.3, getspnam.3, inet_pton.3, insque.3, isfdtype.3, mallinfo.3, mallopt.3, matherr.3, mcheck.3, mempcpy.3, mkfifo.3, mq_getattr.3, newlocale.3, open_memstream.3, openpty.3, perror.3, posix_memalign.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setaffinity_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, regex.3, resolver.3, rpmatch.3, rtnetlink.3, scanf.3, setbuf.3, strchr.3, strfromd.3, strverscmp.3, termios.3, tsearch.3, unlocked_stdio.3, updwtmp.3, netlink.7, rtld-audit.7, sock_diag.7, unix.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 15:44:09 +00:00
|
|
|
.PP
|
2012-04-17 20:32:35 +00:00
|
|
|
.BI "enum mcheck_status mprobe(void *" ptr );
|
|
|
|
.fi
|
|
|
|
.SH DESCRIPTION
|
|
|
|
The
|
|
|
|
.BR mcheck ()
|
|
|
|
function installs a set of debugging hooks for the
|
|
|
|
.BR malloc (3)
|
|
|
|
family of memory-allocation functions.
|
|
|
|
These hooks cause certain consistency checks to be performed
|
|
|
|
on the state of the heap.
|
|
|
|
The checks can detect application errors such as freeing a block of memory
|
|
|
|
more than once or corrupting the bookkeeping data structures
|
|
|
|
that immediately precede a block of allocated memory.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2012-04-17 20:32:35 +00:00
|
|
|
To be effective, the
|
|
|
|
.BR mcheck ()
|
|
|
|
function must be called before the first call to
|
|
|
|
.BR malloc (3)
|
|
|
|
or a related function.
|
|
|
|
In cases where this is difficult to ensure, linking the program with
|
2013-12-18 19:28:13 +00:00
|
|
|
.IR \-lmcheck
|
2012-04-17 20:32:35 +00:00
|
|
|
inserts an implicit call to
|
|
|
|
.BR mcheck ()
|
|
|
|
(with a NULL argument)
|
|
|
|
before the first call to a memory-allocation function.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2012-04-17 20:32:35 +00:00
|
|
|
The
|
|
|
|
.BR mcheck_pedantic ()
|
|
|
|
function is similar to
|
|
|
|
.BR mcheck (),
|
|
|
|
but performs checks on all allocated blocks whenever
|
|
|
|
one of the memory-allocation functions is called.
|
|
|
|
This can be very slow!
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2012-04-17 20:32:35 +00:00
|
|
|
The
|
|
|
|
.BR mcheck_check_all ()
|
|
|
|
function causes an immediate check on all allocated blocks.
|
intro.1, _syscall.2, access.2, arch_prctl.2, cacheflush.2, chown.2, clock_getres.2, clone.2, create_module.2, fcntl.2, flock.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getpriority.2, getrlimit.2, getrusage.2, ioprio_set.2, kexec_load.2, madvise.2, mbind.2, migrate_pages.2, mknod.2, mmap.2, mount.2, move_pages.2, mprotect.2, open.2, pause.2, pciconfig_read.2, perf_event_open.2, prctl.2, ptrace.2, query_module.2, read.2, reboot.2, recv.2, s390_runtime_instr.2, sched_setscheduler.2, select_tut.2, send.2, set_mempolicy.2, setfsgid.2, setfsuid.2, sigaction.2, spu_create.2, spu_run.2, stime.2, swapon.2, syslog.2, timer_create.2, timer_getoverrun.2, times.2, tkill.2, umount.2, unimplemented.2, ustat.2, vm86.2, wait.2, abs.3, aio_read.3, aio_write.3, bsd_signal.3, catgets.3, clearenv.3, cmsg.3, dbopen.3, dirfd.3, dlopen.3, exec.3, fenv.3, ferror.3, fmemopen.3, fnmatch.3, fopen.3, futimes.3, getaddrinfo.3, getifaddrs.3, getipnodebyname.3, hsearch.3, if_nameindex.3, inet_pton.3, mblen.3, mbrlen.3, mbsrtowcs.3, mbtowc.3, mcheck.3, memfrob.3, mq_notify.3, netlink.3, posix_memalign.3, printf.3, pthread_attr_setscope.3, pthread_cleanup_push.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setcancelstate.3, pthread_setconcurrency.3, raise.3, resolver.3, rpc.3, rtime.3, rtnetlink.3, scanf.3, setbuf.3, setnetgrent.3, shm_open.3, sigpause.3, sigset.3, sigwait.3, sockatmark.3, strcasecmp.3, strcmp.3, strdup.3, strftime.3, strptime.3, strsignal.3, strverscmp.3, sysv_signal.3, termios.3, wcrtomb.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wctomb.3, wprintf.3, console_codes.4, cpuid.4, msr.4, rtc.4, sk98lin.4, st.4, tty.4, charmap.5, core.5, elf.5, hosts.equiv.5, proc.5, resolv.conf.5, services.5, slabinfo.5, arp.7, bootparam.7, capabilities.7, charsets.7, cpuset.7, ddp.7, epoll.7, feature_test_macros.7, futex.7, hier.7, icmp.7, inotify.7, ip.7, ipv6.7, man-pages.7, mdoc.7, mdoc.samples.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, posixoptions.7, pthreads.7, raw.7, rtld-audit.7, rtnetlink.7, sem_overview.7, sigevent.7, socket.7, spufs.7, tcp.7, udp.7, unicode.7, uri.7, utf-8.7, intro.8, ldconfig.8, sync.8: Global fix: fix placement of word "only"
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-31 08:53:00 +00:00
|
|
|
This call is effective only if
|
2012-04-17 20:32:35 +00:00
|
|
|
.BR mcheck ()
|
|
|
|
is called beforehand.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2012-04-17 20:32:35 +00:00
|
|
|
If the system detects an inconsistency in the heap,
|
|
|
|
the caller-supplied function pointed to by
|
|
|
|
.I abortfunc
|
2016-01-22 14:48:58 +00:00
|
|
|
is invoked with a single argument,
|
2012-04-17 20:32:35 +00:00
|
|
|
.IR mstatus ,
|
|
|
|
that indicates what type of inconsistency was detected.
|
|
|
|
If
|
|
|
|
.I abortfunc
|
|
|
|
is NULL, a default function prints an error message on
|
|
|
|
.IR stderr
|
|
|
|
and calls
|
|
|
|
.BR abort (3).
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2012-04-17 20:32:35 +00:00
|
|
|
The
|
|
|
|
.BR mprobe ()
|
|
|
|
function performs a consistency check on
|
|
|
|
the block of allocated memory pointed to by
|
|
|
|
.IR ptr .
|
|
|
|
The
|
|
|
|
.BR mcheck ()
|
|
|
|
function should be called beforehand (otherwise
|
|
|
|
.BR mprobe ()
|
|
|
|
returns
|
|
|
|
.BR MCHECK_DISABLED ).
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2012-04-17 20:32:35 +00:00
|
|
|
The following list describes the values returned by
|
|
|
|
.BR mprobe ()
|
|
|
|
or passed as the
|
|
|
|
.I mstatus
|
2012-04-26 22:58:21 +00:00
|
|
|
argument when
|
2012-04-17 20:32:35 +00:00
|
|
|
.I abortfunc
|
|
|
|
is invoked:
|
|
|
|
.TP
|
|
|
|
.BR MCHECK_DISABLED " (" mprobe "() only)"
|
|
|
|
.BR mcheck ()
|
|
|
|
was not called before the first memory allocation function was called.
|
|
|
|
Consistency checking is not possible.
|
|
|
|
.TP
|
|
|
|
.BR MCHECK_OK " (" mprobe "() only)"
|
|
|
|
No inconsistency detected.
|
|
|
|
.TP
|
|
|
|
.B MCHECK_HEAD
|
|
|
|
Memory preceding an allocated block was clobbered.
|
|
|
|
.TP
|
|
|
|
.B MCHECK_TAIL
|
|
|
|
Memory following an allocated block was clobbered.
|
|
|
|
.TP
|
|
|
|
.B
|
|
|
|
MCHECK_FREE
|
|
|
|
A block of memory was freed twice.
|
|
|
|
.SH RETURN VALUE
|
|
|
|
.BR mcheck ()
|
|
|
|
and
|
|
|
|
.BR mcheck_pedantic ()
|
|
|
|
return 0 on success, or \-1 on error.
|
|
|
|
.SH VERSIONS
|
|
|
|
The
|
|
|
|
.BR mcheck_pedantic ()
|
|
|
|
and
|
|
|
|
.BR mcheck_check_all ()
|
|
|
|
functions are available since glibc 2.2.
|
|
|
|
The
|
2012-06-07 12:27:54 +00:00
|
|
|
.BR mcheck ()
|
2012-04-17 20:32:35 +00:00
|
|
|
and
|
2012-06-07 12:27:54 +00:00
|
|
|
.BR mprobe ()
|
2012-04-17 20:32:35 +00:00
|
|
|
functions are present since at least glibc 2.0
|
2015-04-23 04:51:45 +00:00
|
|
|
.SH ATTRIBUTES
|
|
|
|
For an explanation of the terms used in this section, see
|
|
|
|
.BR attributes (7).
|
Various pages: Improve formatting in ATTRIBUTES
Make the formatting more consistent inside the tables in the
ATTRIBUTES sections. Make the source code more uniform; in
particular, eliminate the use of custom tweaks using
'lbwNN'/'lwNN' and .br macros. In addition, ensure that
hyphenation and text justification do not occur inside the tables.
This is a script-driven edit:
[[
PAGE_LIST=$(git grep -l 'SH ATTRIBUTES' man[23])
# Strip out any preexisting .sp/.br/.ad macros
sed -i '/SH ATTR/,/^\.SH/{/^\.sp/d; /^\.br/d; /\.ad/d}' $PAGE_LIST
# Eliminate any use of 'wNN' in tables; default first column
# to fill unused space
sed -i '/SH ATTR/,/^\.SH/s/lbw[0-9]*/lb/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/lw[0-9]*/l/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/^lb /lbx /' $PAGE_LIST
# Nest the tables inside ".ad l"+".nh" and ".hy"+".ad"+".sp 1"
# ".ad l" ==> no right justification of text in table cells
# ".nh" ==> No hyphenation in table cells
# ".sp 1" ==> ensure a blank line before the next section heading
sed -i '/SH ATTR/,/^\.SH/{/\.TS/i.ad l\n.nh
}' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/{/\.TE/a.hy\n.ad\n.sp 1
}' $PAGE_LIST
# In a few of the tables, the third column has a lot of text, so
# make that column wide (rather than the first column)
sed -i '/^lbx/{s/lbx/lb/;s/lb$/lbx/}' \
man3/bindresvport.3 \
man3/fmtmsg.3 man3/gethostbyname.3 man3/getlogin.3 \
man3/getnetent.3 man3/getprotoent.3 man3/getpwent.3 \
man3/getservent.3 man3/getspnam.3 man3/getutent.3 man3/glob.3 \
man3/login.3 \
man3/setnetgrent.3 \
man3/wordexp.3
]]
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-06 09:52:04 +00:00
|
|
|
.ad l
|
|
|
|
.nh
|
2015-04-23 04:51:45 +00:00
|
|
|
.TS
|
|
|
|
allbox;
|
Various pages: Improve formatting in ATTRIBUTES
Make the formatting more consistent inside the tables in the
ATTRIBUTES sections. Make the source code more uniform; in
particular, eliminate the use of custom tweaks using
'lbwNN'/'lwNN' and .br macros. In addition, ensure that
hyphenation and text justification do not occur inside the tables.
This is a script-driven edit:
[[
PAGE_LIST=$(git grep -l 'SH ATTRIBUTES' man[23])
# Strip out any preexisting .sp/.br/.ad macros
sed -i '/SH ATTR/,/^\.SH/{/^\.sp/d; /^\.br/d; /\.ad/d}' $PAGE_LIST
# Eliminate any use of 'wNN' in tables; default first column
# to fill unused space
sed -i '/SH ATTR/,/^\.SH/s/lbw[0-9]*/lb/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/lw[0-9]*/l/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/^lb /lbx /' $PAGE_LIST
# Nest the tables inside ".ad l"+".nh" and ".hy"+".ad"+".sp 1"
# ".ad l" ==> no right justification of text in table cells
# ".nh" ==> No hyphenation in table cells
# ".sp 1" ==> ensure a blank line before the next section heading
sed -i '/SH ATTR/,/^\.SH/{/\.TS/i.ad l\n.nh
}' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/{/\.TE/a.hy\n.ad\n.sp 1
}' $PAGE_LIST
# In a few of the tables, the third column has a lot of text, so
# make that column wide (rather than the first column)
sed -i '/^lbx/{s/lbx/lb/;s/lb$/lbx/}' \
man3/bindresvport.3 \
man3/fmtmsg.3 man3/gethostbyname.3 man3/getlogin.3 \
man3/getnetent.3 man3/getprotoent.3 man3/getpwent.3 \
man3/getservent.3 man3/getspnam.3 man3/getutent.3 man3/glob.3 \
man3/login.3 \
man3/setnetgrent.3 \
man3/wordexp.3
]]
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-06 09:52:04 +00:00
|
|
|
lbx lb lb
|
2015-04-23 04:51:45 +00:00
|
|
|
l l l.
|
|
|
|
Interface Attribute Value
|
|
|
|
T{
|
|
|
|
.BR mcheck (),
|
|
|
|
.BR mcheck_pedantic (),
|
|
|
|
.BR mcheck_check_all (),
|
|
|
|
.BR mprobe ()
|
|
|
|
T} Thread safety T{
|
|
|
|
MT-Unsafe race:mcheck
|
|
|
|
const:malloc_hooks
|
|
|
|
T}
|
|
|
|
.TE
|
Various pages: Improve formatting in ATTRIBUTES
Make the formatting more consistent inside the tables in the
ATTRIBUTES sections. Make the source code more uniform; in
particular, eliminate the use of custom tweaks using
'lbwNN'/'lwNN' and .br macros. In addition, ensure that
hyphenation and text justification do not occur inside the tables.
This is a script-driven edit:
[[
PAGE_LIST=$(git grep -l 'SH ATTRIBUTES' man[23])
# Strip out any preexisting .sp/.br/.ad macros
sed -i '/SH ATTR/,/^\.SH/{/^\.sp/d; /^\.br/d; /\.ad/d}' $PAGE_LIST
# Eliminate any use of 'wNN' in tables; default first column
# to fill unused space
sed -i '/SH ATTR/,/^\.SH/s/lbw[0-9]*/lb/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/lw[0-9]*/l/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/^lb /lbx /' $PAGE_LIST
# Nest the tables inside ".ad l"+".nh" and ".hy"+".ad"+".sp 1"
# ".ad l" ==> no right justification of text in table cells
# ".nh" ==> No hyphenation in table cells
# ".sp 1" ==> ensure a blank line before the next section heading
sed -i '/SH ATTR/,/^\.SH/{/\.TS/i.ad l\n.nh
}' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/{/\.TE/a.hy\n.ad\n.sp 1
}' $PAGE_LIST
# In a few of the tables, the third column has a lot of text, so
# make that column wide (rather than the first column)
sed -i '/^lbx/{s/lbx/lb/;s/lb$/lbx/}' \
man3/bindresvport.3 \
man3/fmtmsg.3 man3/gethostbyname.3 man3/getlogin.3 \
man3/getnetent.3 man3/getprotoent.3 man3/getpwent.3 \
man3/getservent.3 man3/getspnam.3 man3/getutent.3 man3/glob.3 \
man3/login.3 \
man3/setnetgrent.3 \
man3/wordexp.3
]]
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-06 09:52:04 +00:00
|
|
|
.hy
|
|
|
|
.ad
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.sp 1
|
2012-04-17 20:32:35 +00:00
|
|
|
.SH CONFORMING TO
|
|
|
|
These functions are GNU extensions.
|
|
|
|
.SH NOTES
|
|
|
|
Linking a program with
|
|
|
|
.I \-lmcheck
|
|
|
|
and using the
|
|
|
|
.B MALLOC_CHECK_
|
|
|
|
environment variable (described in
|
|
|
|
.BR mallopt (3))
|
|
|
|
cause the same kinds of errors to be detected.
|
|
|
|
But, using
|
|
|
|
.B MALLOC_CHECK_
|
|
|
|
does not require the application to be relinked.
|
|
|
|
.\" But is MALLOC_CHECK_ slower?
|
2020-05-21 08:00:37 +00:00
|
|
|
.SH EXAMPLES
|
2012-04-17 20:32:35 +00:00
|
|
|
The program below calls
|
|
|
|
.BR mcheck ()
|
|
|
|
with a NULL argument and then frees the same block of memory twice.
|
|
|
|
The following shell session demonstrates what happens
|
|
|
|
when running the program:
|
ioctl_console.2, ioctl_getfsmap.2, ioctl_iflags.2, ioctl_list.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, link.2, mmap.2, modify_ldt.2, msgctl.2, poll.2, query_module.2, quotactl.2, recv.2, recvmmsg.2, sched_setscheduler.2, seccomp.2, select.2, semctl.2, semop.2, send.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sysinfo.2, timer_create.2, timerfd_create.2, uname.2, unshare.2, userfaultfd.2, ustat.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, backtrace.3, bswap.3, btree.3, clock_getcpuclockid.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, fmemopen.3, fopencookie.3, frexp.3, fts.3, ftw.3, getaddrinfo.3, getaddrinfo_a.3, getcontext.3, getgrouplist.3, getifaddrs.3, getipnodebyname.3, getnameinfo.3, getopt.3, getprotoent_r.3, getpwent_r.3, getrpcent.3, getservent_r.3, getttyent.3, getumask.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, inet.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallopt.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mtrace.3, newlocale.3, ntp_gettime.3, offsetof.3, posix_openpt.3, printf.3, pthread_setname_np.3, pthread_setschedparam.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, sigvec.3, stdarg.3, strcat.3, strcpy.3, strftime.3, strtol.3, toupper.3, ttyslot.3, fuse.4, loop.4, st.4, elf.5, cgroup_namespaces.7, cgroups.7, feature_test_macros.7, inode.7, inotify.7, keyrings.7, man-pages.7, math_error.7, mount_namespaces.7, mq_overview.7, pthreads.7, sched.7, session-keyring.7, udplite.7, unix.7, vdso.7: Use consistent markup for code snippets
The preferred form is
.PP/.IP
.in +4n
.EX
<code>
.EE
.in
.PP/.IP
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:37:55 +00:00
|
|
|
.PP
|
2012-04-17 20:32:35 +00:00
|
|
|
.in +4n
|
ioctl_console.2, ioctl_getfsmap.2, ioctl_iflags.2, ioctl_list.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, link.2, mmap.2, modify_ldt.2, msgctl.2, poll.2, query_module.2, quotactl.2, recv.2, recvmmsg.2, sched_setscheduler.2, seccomp.2, select.2, semctl.2, semop.2, send.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sysinfo.2, timer_create.2, timerfd_create.2, uname.2, unshare.2, userfaultfd.2, ustat.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, backtrace.3, bswap.3, btree.3, clock_getcpuclockid.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, fmemopen.3, fopencookie.3, frexp.3, fts.3, ftw.3, getaddrinfo.3, getaddrinfo_a.3, getcontext.3, getgrouplist.3, getifaddrs.3, getipnodebyname.3, getnameinfo.3, getopt.3, getprotoent_r.3, getpwent_r.3, getrpcent.3, getservent_r.3, getttyent.3, getumask.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, inet.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallopt.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mtrace.3, newlocale.3, ntp_gettime.3, offsetof.3, posix_openpt.3, printf.3, pthread_setname_np.3, pthread_setschedparam.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, sigvec.3, stdarg.3, strcat.3, strcpy.3, strftime.3, strtol.3, toupper.3, ttyslot.3, fuse.4, loop.4, st.4, elf.5, cgroup_namespaces.7, cgroups.7, feature_test_macros.7, inode.7, inotify.7, keyrings.7, man-pages.7, math_error.7, mount_namespaces.7, mq_overview.7, pthreads.7, sched.7, session-keyring.7, udplite.7, unix.7, vdso.7: Use consistent markup for code snippets
The preferred form is
.PP/.IP
.in +4n
.EX
<code>
.EE
.in
.PP/.IP
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:37:55 +00:00
|
|
|
.EX
|
2012-04-17 20:32:35 +00:00
|
|
|
.RB "$" " ./a.out"
|
|
|
|
About to free
|
|
|
|
|
|
|
|
About to free a second time
|
|
|
|
block freed twice
|
|
|
|
Aborted (core dumped)
|
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:52:46 +00:00
|
|
|
.EE
|
2012-04-17 20:32:35 +00:00
|
|
|
.in
|
|
|
|
.SS Program source
|
|
|
|
\&
|
memusage.1, clone.2, eventfd.2, futex.2, getdents.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, keyctl.2, mmap.2, mprotect.2, msgop.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, setns.2, tee.2, timer_create.2, timerfd_create.2, unshare.2, userfaultfd.2, wait.2, __ppc_get_timebase.3, backtrace.3, bswap.3, clock_getcpuclockid.3, dl_iterate_phdr.3, dlinfo.3, dlopen.3, duplocale.3, end.3, endian.3, fmemopen.3, fopencookie.3, frexp.3, ftw.3, getdate.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, mq_getattr.3, mq_notify.3, newlocale.3, offsetof.3, posix_spawn.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, scandir.3, sem_wait.3, strcat.3, strftime.3, strtok.3, strtol.3, strverscmp.3, loop.4, core.5, aio.7, fanotify.7, feature_test_macros.7, inotify.7, pkeys.7, unix.7, user_namespaces.7: Use .EX/.EE for EXAMPLE programs
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 08:44:33 +00:00
|
|
|
.EX
|
2012-04-17 20:32:35 +00:00
|
|
|
#include <stdlib.h>
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <mcheck.h>
|
|
|
|
|
|
|
|
int
|
|
|
|
main(int argc, char *argv[])
|
|
|
|
{
|
|
|
|
char *p;
|
|
|
|
|
|
|
|
if (mcheck(NULL) != 0) {
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
fprintf(stderr, "mcheck() failed\en");
|
2012-04-17 20:32:35 +00:00
|
|
|
|
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
|
|
|
|
p = malloc(1000);
|
|
|
|
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
fprintf(stderr, "About to free\en");
|
2012-04-17 20:32:35 +00:00
|
|
|
free(p);
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
fprintf(stderr, "\enAbout to free a second time\en");
|
2012-04-17 20:32:35 +00:00
|
|
|
free(p);
|
|
|
|
|
|
|
|
exit(EXIT_SUCCESS);
|
|
|
|
}
|
memusage.1, clone.2, eventfd.2, futex.2, getdents.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, keyctl.2, mmap.2, mprotect.2, msgop.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, setns.2, tee.2, timer_create.2, timerfd_create.2, unshare.2, userfaultfd.2, wait.2, __ppc_get_timebase.3, backtrace.3, bswap.3, clock_getcpuclockid.3, dl_iterate_phdr.3, dlinfo.3, dlopen.3, duplocale.3, end.3, endian.3, fmemopen.3, fopencookie.3, frexp.3, ftw.3, getdate.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, mq_getattr.3, mq_notify.3, newlocale.3, offsetof.3, posix_spawn.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, scandir.3, sem_wait.3, strcat.3, strftime.3, strtok.3, strtol.3, strverscmp.3, loop.4, core.5, aio.7, fanotify.7, feature_test_macros.7, inotify.7, pkeys.7, unix.7, user_namespaces.7: Use .EX/.EE for EXAMPLE programs
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 08:44:33 +00:00
|
|
|
.EE
|
2012-04-17 20:32:35 +00:00
|
|
|
.SH SEE ALSO
|
|
|
|
.BR malloc (3),
|
|
|
|
.BR mallopt (3),
|
|
|
|
.BR mtrace (3)
|