2008-08-08 16:41:48 +00:00
|
|
|
.\" Copyright 1993 Rickard E. Faith (faith@cs.unc.edu)
|
|
|
|
.\" Portions extracted from /usr/include/sys/socket.h, which does not have
|
|
|
|
.\" any authorship information in it. It is probably available under the GPL.
|
|
|
|
.\"
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:01 +00:00
|
|
|
.\" %%%LICENSE_START(VERBATIM)
|
2008-08-08 16:41:48 +00:00
|
|
|
.\" Permission is granted to make and distribute verbatim copies of this
|
|
|
|
.\" manual provided the copyright notice and this permission notice are
|
|
|
|
.\" preserved on all copies.
|
|
|
|
.\"
|
|
|
|
.\" Permission is granted to copy and distribute modified versions of this
|
|
|
|
.\" manual under the conditions for verbatim copying, provided that the
|
|
|
|
.\" entire resulting derived work is distributed under the terms of a
|
|
|
|
.\" permission notice identical to this one.
|
|
|
|
.\"
|
|
|
|
.\" Since the Linux kernel and libraries are constantly changing, this
|
|
|
|
.\" manual page may be incorrect or out-of-date. The author(s) assume no
|
|
|
|
.\" responsibility for errors or omissions, or for damages resulting from
|
|
|
|
.\" the use of the information contained herein. The author(s) may not
|
|
|
|
.\" have taken the same level of care in the production of this manual,
|
|
|
|
.\" which is licensed free of charge, as they might when working
|
|
|
|
.\" professionally.
|
|
|
|
.\"
|
|
|
|
.\" Formatted or processed versions of this manual, if unaccompanied by
|
|
|
|
.\" the source, must acknowledge the copyright and authors of this work.
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:40 +00:00
|
|
|
.\" %%%LICENSE_END
|
2008-08-08 16:41:48 +00:00
|
|
|
.\"
|
|
|
|
.\"
|
|
|
|
.\" Other portions are from the 6.9 (Berkeley) 3/10/91 man page:
|
|
|
|
.\"
|
|
|
|
.\" Copyright (c) 1983 The Regents of the University of California.
|
|
|
|
.\" All rights reserved.
|
|
|
|
.\"
|
accept.2, bind.2, connect.2, getpeername.2, getpriority.2, getsockname.2, getsockopt.2, ioctl.2, killpg.2, listen.2, lseek.2, readlink.2, recv.2, send.2, setpgid.2, setreuid.2, shutdown.2, socket.2, socketpair.2, syscall.2, truncate.2, alloca.3, btree.3, daemon.3, dbopen.3, err.3, exec.3, fclose.3, ferror.3, fflush.3, fopen.3, fread.3, fseek.3, fts.3, hash.3, mpool.3, popen.3, queue.3, rcmd.3, recno.3, rexec.3, scanf.3, setbuf.3, stdarg.3, stdio.3, strtod.3, hostname.7, mdoc.7, mdoc.samples.7: srcfix: LICENSE: s/BSD_4_CLAUSE_FULL/BSD_4_CLAUSE_UCB/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 16:41:19 +00:00
|
|
|
.\" %%%LICENSE_START(BSD_4_CLAUSE_UCB)
|
2008-08-08 16:41:48 +00:00
|
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
|
|
.\" modification, are permitted provided that the following conditions
|
|
|
|
.\" are met:
|
|
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
|
|
.\" 3. All advertising materials mentioning features or use of this software
|
|
|
|
.\" must display the following acknowledgement:
|
|
|
|
.\" This product includes software developed by the University of
|
|
|
|
.\" California, Berkeley and its contributors.
|
|
|
|
.\" 4. Neither the name of the University nor the names of its contributors
|
|
|
|
.\" may be used to endorse or promote products derived from this software
|
|
|
|
.\" without specific prior written permission.
|
|
|
|
.\"
|
|
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
|
|
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
.\" SUCH DAMAGE.
|
accept.2, bind.2, connect.2, getpeername.2, getpriority.2, getsockname.2, getsockopt.2, ioctl.2, killpg.2, listen.2, lseek.2, readlink.2, recv.2, send.2, setpgid.2, setreuid.2, shutdown.2, socket.2, socketpair.2, syscall.2, truncate.2, alloca.3, btree.3, daemon.3, dbopen.3, err.3, exec.3, fclose.3, ferror.3, fflush.3, fopen.3, fread.3, fseek.3, fts.3, getloadavg.3, hash.3, mpool.3, openpty.3, popen.3, queue.3, rcmd.3, recno.3, rexec.3, scanf.3, setbuf.3, stdarg.3, stdio.3, strtod.3, hostname.7, mdoc.7, mdoc.samples.7, operator.7, symlink.7: Add LICENSE_START(BSD_[34]_CLAUSE_FULL)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:48 +00:00
|
|
|
.\" %%%LICENSE_END
|
2008-08-08 16:41:48 +00:00
|
|
|
.\"
|
|
|
|
.\" Modified 1997-01-31 by Eric S. Raymond <esr@thyrsus.com>
|
|
|
|
.\" Modified 1998, 1999 by Andi Kleen
|
|
|
|
.\" Modified 2004-06-23 by Michael Kerrisk <mtk.manpages@gmail.com>
|
|
|
|
.\"
|
getent.1, localedef.1, accept.2, arch_prctl.2, clock_getres.2, clock_nanosleep.2, connect.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, execve.2, getitimer.2, getsockopt.2, gettid.2, inotify_add_watch.2, inotify_init.2, io_submit.2, ioctl.2, lseek.2, madvise.2, mlock.2, mmap.2, mprotect.2, msgctl.2, msgop.2, open_by_handle_at.2, openat2.2, pidfd_open.2, poll.2, prctl.2, quotactl.2, s390_sthyi.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, setns.2, shmctl.2, shmget.2, shmop.2, sigaction.2, stat.2, statx.2, syscalls.2, timer_create.2, timerfd_create.2, unshare.2, wait.2, CPU_SET.3, aio_init.3, atoi.3, des_crypt.3, dirfd.3, fmemopen.3, fopencookie.3, ftok.3, fts.3, getaddrinfo.3, getifaddrs.3, getrpcent.3, gsignal.3, lio_listio.3, nl_langinfo.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, scanf.3, sem_init.3, sem_post.3, shm_open.3, strcmp.3, strftime.3, st.4, elf.5, group.5, proc.5, services.5, aio.7, cgroups.7, feature_test_macros.7, keyrings.7, man-pages.7, namespaces.7, path_resolution.7, sigevent.7, signal.7, socket.7, sysvipc.7, time.7, udp.7: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-11 20:07:24 +00:00
|
|
|
.TH CONNECT 2 2020-04-11 "Linux" "Linux Programmer's Manual"
|
2008-08-08 16:41:48 +00:00
|
|
|
.SH NAME
|
|
|
|
connect \- initiate a connection on a socket
|
|
|
|
.SH SYNOPSIS
|
|
|
|
.nf
|
|
|
|
.B #include <sys/socket.h>
|
_exit.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, create_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, exit_group.2, fanotify_mark.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, ioctl.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_tty.2, ioperm.2, iopl.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_mempolicy.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shutdown.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, sync.2, sysctl.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, difftime.3, dirfd.3, div.3, dlerror.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, erf.3, erfc.3, err.3, errno.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, infnan.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, newlocale.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, y0.3, dsp56k.4, random.4, rtc.4, st.4, ddp.7, ip.7, ipv6.7, packet.7, rtnetlink.7, socket.7, tcp.7, udp.7, udplite.7, x25.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 15:16:29 +00:00
|
|
|
.PP
|
2008-12-03 20:36:34 +00:00
|
|
|
.BI "int connect(int " sockfd ", const struct sockaddr *" addr ,
|
2008-08-08 16:41:48 +00:00
|
|
|
.BI " socklen_t " addrlen );
|
|
|
|
.fi
|
|
|
|
.SH DESCRIPTION
|
|
|
|
The
|
|
|
|
.BR connect ()
|
|
|
|
system call connects the socket referred to by the file descriptor
|
|
|
|
.I sockfd
|
|
|
|
to the address specified by
|
2008-12-03 20:36:34 +00:00
|
|
|
.IR addr .
|
2008-08-08 16:41:48 +00:00
|
|
|
The
|
|
|
|
.I addrlen
|
|
|
|
argument specifies the size of
|
2008-12-03 20:36:34 +00:00
|
|
|
.IR addr .
|
2008-08-08 16:41:48 +00:00
|
|
|
The format of the address in
|
2008-12-03 20:36:34 +00:00
|
|
|
.I addr
|
2008-08-08 16:41:48 +00:00
|
|
|
is determined by the address space of the socket
|
|
|
|
.IR sockfd ;
|
|
|
|
see
|
|
|
|
.BR socket (2)
|
|
|
|
for further details.
|
_syscall.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fallocate.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ioprio_set.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open_by_handle_at.2, outb.2, perf_event_open.2, perfmonctl.2, personality.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, recvmmsg.2, remap_file_pages.2, rename.2, request_key.2, restart_syscall.2, rt_sigqueueinfo.2, s390_pci_mmio_write.2, s390_runtime_instr.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysinfo.2, syslog.2, tee.2, time.2, timer_create.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, utime.2, utimensat.2, vfork.2, vmsplice.2, wait.2, wait4.2, write.2: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 07:30:51 +00:00
|
|
|
.PP
|
2008-08-08 16:41:48 +00:00
|
|
|
If the socket
|
|
|
|
.I sockfd
|
|
|
|
is of type
|
2014-03-26 12:47:19 +00:00
|
|
|
.BR SOCK_DGRAM ,
|
2008-08-08 16:41:48 +00:00
|
|
|
then
|
2008-12-03 20:36:34 +00:00
|
|
|
.I addr
|
2008-08-08 16:41:48 +00:00
|
|
|
is the address to which datagrams are sent by default, and the only
|
|
|
|
address from which datagrams are received.
|
|
|
|
If the socket is of type
|
|
|
|
.B SOCK_STREAM
|
|
|
|
or
|
|
|
|
.BR SOCK_SEQPACKET ,
|
|
|
|
this call attempts to make a connection to the socket that is bound
|
|
|
|
to the address specified by
|
2008-12-03 20:36:34 +00:00
|
|
|
.IR addr .
|
2008-08-08 16:41:48 +00:00
|
|
|
.PP
|
connect.2: Update the details on AF_UNSPEC
Update the details on AF_UNSPEC and circumstances in which
socket can be reconnected.
From a mail conversation with Eric Dumazet:
> connect() man page seems obsolete or confusing :
>
> Generally, connection-based protocol sockets may successfully
> connect() only once; connectionless protocol sockets may use
> connect() multiple times to change their association.
> Connectionless sockets may dissolve the association by connecting to
> an address with the sa_family member of sockaddr set to AF_UNSPEC
> (supported on Linux since kernel 2.2).>
>
> 1) At least TCP has supported AF_UNSPEC thing forever.
> 2) By definition connectionless sockets do not have an association,
> why would they call connect(AF_UNSPEC) to remove a connection
> which does not exist ...
Calling connect() on a connectionless socket serves two purposes:
a) Assigns a default outgoing address for datagrams (sent using write(2)).
b) Causes datagrams sent from sources other than the peer address to be
discarded.
Both of these things are true in AF_UNIX and the Internet domains.
Using connect(AF_UNSPEC) allows the local datagram socket to clear
this association (without having to connect() to a *different*
peer), so that now it can send datagrams to any peer and receive
datagrams for any peer, (I've just retested all of this.)
>
> Maybe we should rewrite this paragraph to match reality, since
> this causes confusion.
>
>
> Some protocol sockets may successfully connect() only once.
> Some protocol sockets may use connect() multiple times to change
> their association.
> Some protocol sockets may dissolve the association by connecting to
> an address with the sa_family member of sockaddr set to AF_UNSPEC
> (supported on Linux since kernel 2.2).
When I first saw your note, I was afraid that I had written
the offending text. But, I see it has been there since the
manual page was first added in 1992 (other than the piece
"(supported since on Linux since kernel 2.2)", which I added in
2007). Perhaps it was true in 1992.
Anyway, I confirm your statement about TCP sockets. The
connect(AF_UNSPEC) thing works; thereafter, the socket may be
connected to another socket.
Interestingly, connect(AF_UNSPEC) does not seem to work for
UNIX domain stream sockets. (My light testing gives an EINVAL
error on connect(AF_UNSPEC) of an already connected UNIX stream
socket. I could not easily spot where this error was being
generated in the kernel though.)
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-06 11:43:00 +00:00
|
|
|
Some protocol sockets (e.g., UNIX domain stream sockets)
|
|
|
|
may successfully
|
2008-08-08 16:41:48 +00:00
|
|
|
.BR connect ()
|
connect.2: Update the details on AF_UNSPEC
Update the details on AF_UNSPEC and circumstances in which
socket can be reconnected.
From a mail conversation with Eric Dumazet:
> connect() man page seems obsolete or confusing :
>
> Generally, connection-based protocol sockets may successfully
> connect() only once; connectionless protocol sockets may use
> connect() multiple times to change their association.
> Connectionless sockets may dissolve the association by connecting to
> an address with the sa_family member of sockaddr set to AF_UNSPEC
> (supported on Linux since kernel 2.2).>
>
> 1) At least TCP has supported AF_UNSPEC thing forever.
> 2) By definition connectionless sockets do not have an association,
> why would they call connect(AF_UNSPEC) to remove a connection
> which does not exist ...
Calling connect() on a connectionless socket serves two purposes:
a) Assigns a default outgoing address for datagrams (sent using write(2)).
b) Causes datagrams sent from sources other than the peer address to be
discarded.
Both of these things are true in AF_UNIX and the Internet domains.
Using connect(AF_UNSPEC) allows the local datagram socket to clear
this association (without having to connect() to a *different*
peer), so that now it can send datagrams to any peer and receive
datagrams for any peer, (I've just retested all of this.)
>
> Maybe we should rewrite this paragraph to match reality, since
> this causes confusion.
>
>
> Some protocol sockets may successfully connect() only once.
> Some protocol sockets may use connect() multiple times to change
> their association.
> Some protocol sockets may dissolve the association by connecting to
> an address with the sa_family member of sockaddr set to AF_UNSPEC
> (supported on Linux since kernel 2.2).
When I first saw your note, I was afraid that I had written
the offending text. But, I see it has been there since the
manual page was first added in 1992 (other than the piece
"(supported since on Linux since kernel 2.2)", which I added in
2007). Perhaps it was true in 1992.
Anyway, I confirm your statement about TCP sockets. The
connect(AF_UNSPEC) thing works; thereafter, the socket may be
connected to another socket.
Interestingly, connect(AF_UNSPEC) does not seem to work for
UNIX domain stream sockets. (My light testing gives an EINVAL
error on connect(AF_UNSPEC) of an already connected UNIX stream
socket. I could not easily spot where this error was being
generated in the kernel though.)
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-06 11:43:00 +00:00
|
|
|
only once.
|
|
|
|
.PP
|
|
|
|
Some protocol sockets
|
|
|
|
(e.g., datagram sockets in the UNIX and Internet domains)
|
|
|
|
may use
|
2008-08-08 16:41:48 +00:00
|
|
|
.BR connect ()
|
|
|
|
multiple times to change their association.
|
connect.2: Update the details on AF_UNSPEC
Update the details on AF_UNSPEC and circumstances in which
socket can be reconnected.
From a mail conversation with Eric Dumazet:
> connect() man page seems obsolete or confusing :
>
> Generally, connection-based protocol sockets may successfully
> connect() only once; connectionless protocol sockets may use
> connect() multiple times to change their association.
> Connectionless sockets may dissolve the association by connecting to
> an address with the sa_family member of sockaddr set to AF_UNSPEC
> (supported on Linux since kernel 2.2).>
>
> 1) At least TCP has supported AF_UNSPEC thing forever.
> 2) By definition connectionless sockets do not have an association,
> why would they call connect(AF_UNSPEC) to remove a connection
> which does not exist ...
Calling connect() on a connectionless socket serves two purposes:
a) Assigns a default outgoing address for datagrams (sent using write(2)).
b) Causes datagrams sent from sources other than the peer address to be
discarded.
Both of these things are true in AF_UNIX and the Internet domains.
Using connect(AF_UNSPEC) allows the local datagram socket to clear
this association (without having to connect() to a *different*
peer), so that now it can send datagrams to any peer and receive
datagrams for any peer, (I've just retested all of this.)
>
> Maybe we should rewrite this paragraph to match reality, since
> this causes confusion.
>
>
> Some protocol sockets may successfully connect() only once.
> Some protocol sockets may use connect() multiple times to change
> their association.
> Some protocol sockets may dissolve the association by connecting to
> an address with the sa_family member of sockaddr set to AF_UNSPEC
> (supported on Linux since kernel 2.2).
When I first saw your note, I was afraid that I had written
the offending text. But, I see it has been there since the
manual page was first added in 1992 (other than the piece
"(supported since on Linux since kernel 2.2)", which I added in
2007). Perhaps it was true in 1992.
Anyway, I confirm your statement about TCP sockets. The
connect(AF_UNSPEC) thing works; thereafter, the socket may be
connected to another socket.
Interestingly, connect(AF_UNSPEC) does not seem to work for
UNIX domain stream sockets. (My light testing gives an EINVAL
error on connect(AF_UNSPEC) of an already connected UNIX stream
socket. I could not easily spot where this error was being
generated in the kernel though.)
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-06 11:43:00 +00:00
|
|
|
.PP
|
|
|
|
Some protocol sockets
|
|
|
|
(e.g., TCP sockets as well as datagram sockets in the UNIX and
|
|
|
|
Internet domains)
|
|
|
|
may dissolve the association by connecting to an address with the
|
2008-08-08 16:41:48 +00:00
|
|
|
.I sa_family
|
|
|
|
member of
|
|
|
|
.I sockaddr
|
|
|
|
set to
|
2020-06-21 07:26:30 +00:00
|
|
|
.BR AF_UNSPEC ;
|
connect.2: Update the details on AF_UNSPEC
Update the details on AF_UNSPEC and circumstances in which
socket can be reconnected.
From a mail conversation with Eric Dumazet:
> connect() man page seems obsolete or confusing :
>
> Generally, connection-based protocol sockets may successfully
> connect() only once; connectionless protocol sockets may use
> connect() multiple times to change their association.
> Connectionless sockets may dissolve the association by connecting to
> an address with the sa_family member of sockaddr set to AF_UNSPEC
> (supported on Linux since kernel 2.2).>
>
> 1) At least TCP has supported AF_UNSPEC thing forever.
> 2) By definition connectionless sockets do not have an association,
> why would they call connect(AF_UNSPEC) to remove a connection
> which does not exist ...
Calling connect() on a connectionless socket serves two purposes:
a) Assigns a default outgoing address for datagrams (sent using write(2)).
b) Causes datagrams sent from sources other than the peer address to be
discarded.
Both of these things are true in AF_UNIX and the Internet domains.
Using connect(AF_UNSPEC) allows the local datagram socket to clear
this association (without having to connect() to a *different*
peer), so that now it can send datagrams to any peer and receive
datagrams for any peer, (I've just retested all of this.)
>
> Maybe we should rewrite this paragraph to match reality, since
> this causes confusion.
>
>
> Some protocol sockets may successfully connect() only once.
> Some protocol sockets may use connect() multiple times to change
> their association.
> Some protocol sockets may dissolve the association by connecting to
> an address with the sa_family member of sockaddr set to AF_UNSPEC
> (supported on Linux since kernel 2.2).
When I first saw your note, I was afraid that I had written
the offending text. But, I see it has been there since the
manual page was first added in 1992 (other than the piece
"(supported since on Linux since kernel 2.2)", which I added in
2007). Perhaps it was true in 1992.
Anyway, I confirm your statement about TCP sockets. The
connect(AF_UNSPEC) thing works; thereafter, the socket may be
connected to another socket.
Interestingly, connect(AF_UNSPEC) does not seem to work for
UNIX domain stream sockets. (My light testing gives an EINVAL
error on connect(AF_UNSPEC) of an already connected UNIX stream
socket. I could not easily spot where this error was being
generated in the kernel though.)
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-06 11:43:00 +00:00
|
|
|
thereafter, the socket can be connected to another address.
|
|
|
|
.RB ( AF_UNSPEC
|
|
|
|
is supported on Linux since kernel 2.2.)
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH RETURN VALUE
|
2008-08-08 16:41:48 +00:00
|
|
|
If the connection or binding succeeds, zero is returned.
|
|
|
|
On error, \-1 is returned, and
|
|
|
|
.I errno
|
2021-01-07 07:12:28 +00:00
|
|
|
is set to indicate the error.
|
2008-08-08 16:41:48 +00:00
|
|
|
.SH ERRORS
|
|
|
|
The following are general socket errors only.
|
|
|
|
There may be other domain-specific error codes.
|
|
|
|
.TP
|
|
|
|
.B EACCES
|
intro.1, time.1, accept.2, bind.2, connect.2, execve.2, flock.2, getdents.2, getpriority.2, getuid.2, intro.2, ioctl.2, mincore.2, mknod.2, personality.2, ptrace.2, read.2, recv.2, select_tut.2, send.2, sendfile.2, shmctl.2, sigaction.2, signal.2, stat.2, times.2, truncate.2, umask.2, wait.2, MB_CUR_MAX.3, MB_LEN_MAX.3, argz_add.3, btowc.3, clearenv.3, clock.3, cmsg.3, end.3, endian.3, errno.3, exit.3, fgetwc.3, fgetws.3, fopen.3, fputwc.3, fputws.3, fseek.3, fwide.3, getfsent.3, getgrnam.3, gethostid.3, getipnodebyname.3, getmntent.3, getpwnam.3, getwchar.3, grantpt.3, iconv.3, iconv_close.3, iconv_open.3, insque.3, intro.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, malloc.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mkstemp.3, mktemp.3, nl_langinfo.3, openpty.3, posix_openpt.3, printf.3, ptsname.3, putwchar.3, qecvt.3, rcmd.3, readdir.3, rexec.3, rpc.3, setnetgrent.3, shm_open.3, sigpause.3, stdin.3, stpcpy.3, strftime.3, strptime.3, syslog.3, towctrans.3, towlower.3, towupper.3, ttyslot.3, ungetwc.3, unlocked_stdio.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wprintf.3, console_ioctl.4, pts.4, elf.5, filesystems.5, hosts.5, proc.5, ttytype.5, boot.7, capabilities.7, credentials.7, epoll.7, glob.7, koi8-r.7, path_resolution.7, pty.7, signal.7, suffixes.7, time.7, unicode.7, unix.7, uri.7, utf-8.7: global fix: s/Unix/UNIX/
The man pages were rather inconsistent in the use of "Unix"
versus "UNIX". Let's go with the trademark usage.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-10-12 04:45:38 +00:00
|
|
|
For UNIX domain sockets, which are identified by pathname:
|
2008-08-08 16:41:48 +00:00
|
|
|
Write permission is denied on the socket file,
|
|
|
|
or search permission is denied for one of the directories
|
|
|
|
in the path prefix.
|
|
|
|
(See also
|
|
|
|
.BR path_resolution (7).)
|
|
|
|
.TP
|
|
|
|
.BR EACCES ", " EPERM
|
|
|
|
The user tried to connect to a broadcast address without having the socket
|
|
|
|
broadcast flag enabled or the connection request failed because of a local
|
|
|
|
firewall rule.
|
2020-06-09 08:17:34 +00:00
|
|
|
.IP
|
connect.2: Can return EACCES because of SELinux
Recently I had to troubleshoot a problem where a connect() call
was returning EACCES:
17648 socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 37
17648 connect(37, {sa_family=AF_INET, sin_port=htons(8081),
sin_addr=inet_addr("10.12.1.201")}, 16) = -1 EACCES (Permission
denied)
I've traced this to SELinux policy denying the connection. This is
on a Fedora 23 VM:
$ cat /etc/redhat-release
Fedora release 23 (Twenty Three)
$ uname -a
Linux mako-fedora-01 4.8.13-100.fc23.x86_64 #1 SMP Fri Dec 9 14:51:40
UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
The manpage says this can happen when connecting to a broadcast
address, or when a local firewall rule blocks the connection.
However, the address above is unicast, and using 'wget' from
another account to access the URL works fine.
The context is that we're building an OS image, and this involves
downloading RPMs through a proxy. The proxy (polipo) is labelled
by SELinux, and I guess there is some sort of policy that says
"proxy can only connect to HTTP ports". When trying to connect to
a server listening on a port that is not labeled as an HTTP server
port, I guess SELinux steps in. With 'setenforce 0', the build
works fine. In the kernel sources I see connect() calls
security_socket_connect() (see
https://elixir.bootlin.com/linux/latest/source/net/socket.c#L1855),
which calls whatever security hooks are registered. I see the
SELinux hook getting registered at
https://elixir.bootlin.com/linux/latest/source/security/selinux/hooks.c#L7047,
and setting a perf probe on the call proves that the
selinux_socket_connect function gets called (while
tcp_v4_connect() is not).
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-05-29 07:11:48 +00:00
|
|
|
.B EACCES
|
2020-06-09 08:17:34 +00:00
|
|
|
can also be returned if an SELinux policy denied a connection (for
|
connect.2: Can return EACCES because of SELinux
Recently I had to troubleshoot a problem where a connect() call
was returning EACCES:
17648 socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 37
17648 connect(37, {sa_family=AF_INET, sin_port=htons(8081),
sin_addr=inet_addr("10.12.1.201")}, 16) = -1 EACCES (Permission
denied)
I've traced this to SELinux policy denying the connection. This is
on a Fedora 23 VM:
$ cat /etc/redhat-release
Fedora release 23 (Twenty Three)
$ uname -a
Linux mako-fedora-01 4.8.13-100.fc23.x86_64 #1 SMP Fri Dec 9 14:51:40
UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
The manpage says this can happen when connecting to a broadcast
address, or when a local firewall rule blocks the connection.
However, the address above is unicast, and using 'wget' from
another account to access the URL works fine.
The context is that we're building an OS image, and this involves
downloading RPMs through a proxy. The proxy (polipo) is labelled
by SELinux, and I guess there is some sort of policy that says
"proxy can only connect to HTTP ports". When trying to connect to
a server listening on a port that is not labeled as an HTTP server
port, I guess SELinux steps in. With 'setenforce 0', the build
works fine. In the kernel sources I see connect() calls
security_socket_connect() (see
https://elixir.bootlin.com/linux/latest/source/net/socket.c#L1855),
which calls whatever security hooks are registered. I see the
SELinux hook getting registered at
https://elixir.bootlin.com/linux/latest/source/security/selinux/hooks.c#L7047,
and setting a perf probe on the call proves that the
selinux_socket_connect function gets called (while
tcp_v4_connect() is not).
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-05-29 07:11:48 +00:00
|
|
|
example, if there is a policy saying that an HTTP proxy can only
|
|
|
|
connect to ports associated with HTTP servers, and the proxy tries to
|
|
|
|
connect to a different port).
|
2020-06-09 08:17:34 +00:00
|
|
|
dd
|
2008-08-08 16:41:48 +00:00
|
|
|
.TP
|
|
|
|
.B EADDRINUSE
|
|
|
|
Local address is already in use.
|
|
|
|
.TP
|
2014-04-26 12:40:28 +00:00
|
|
|
.B EADDRNOTAVAIL
|
|
|
|
(Internet domain sockets)
|
|
|
|
The socket referred to by
|
|
|
|
.I sockfd
|
|
|
|
had not previously been bound to an address and,
|
|
|
|
upon attempting to bind it to an ephemeral port,
|
|
|
|
it was determined that all port numbers in the ephemeral port range
|
|
|
|
are currently in use.
|
|
|
|
See the discussion of
|
|
|
|
.I /proc/sys/net/ipv4/ip_local_port_range
|
|
|
|
in
|
|
|
|
.BR ip (7).
|
|
|
|
.TP
|
2008-08-08 16:41:48 +00:00
|
|
|
.B EAFNOSUPPORT
|
|
|
|
The passed address didn't have the correct address family in its
|
|
|
|
.I sa_family
|
|
|
|
field.
|
|
|
|
.TP
|
|
|
|
.B EAGAIN
|
2018-08-23 04:13:39 +00:00
|
|
|
For nonblocking UNIX domain sockets, the socket is nonblocking, and the
|
2018-08-26 11:41:23 +00:00
|
|
|
connection cannot be completed immediately.
|
|
|
|
For other socket families, there are insufficient entries in the routing cache.
|
2008-08-08 16:41:48 +00:00
|
|
|
.TP
|
|
|
|
.B EALREADY
|
accept.2, connect.2, eventfd.2, flock.2, open.2, posix_fadvise.2, read.2, recv.2, sched_setscheduler.2, select_tut.2, send.2, signalfd.2, splice.2, timerfd_create.2, write.2, flockfile.3, mkfifo.3, mq_notify.3, mq_open.3, pthread_tryjoin_np.3, scanf.3, random.4, ddp.7, epoll.7, fifo.7, ip.7, pipe.7, socket.7, spufs.7: Global fix: s/non-blocking/nonblocking/
The tendency in English, as prescribed in style guides like
Chicago MoS, is towards removing hyphens after prefixes
like "non-" etc.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-01-16 16:43:10 +00:00
|
|
|
The socket is nonblocking and a previous connection attempt has not yet
|
2008-08-08 16:41:48 +00:00
|
|
|
been completed.
|
|
|
|
.TP
|
|
|
|
.B EBADF
|
2016-01-01 10:49:27 +00:00
|
|
|
.I sockfd
|
|
|
|
is not a valid open file descriptor.
|
2008-08-08 16:41:48 +00:00
|
|
|
.TP
|
|
|
|
.B ECONNREFUSED
|
2017-11-16 17:43:19 +00:00
|
|
|
A
|
|
|
|
.BR connect ()
|
|
|
|
on a stream socket found no one listening on the remote address.
|
2008-08-08 16:41:48 +00:00
|
|
|
.TP
|
|
|
|
.B EFAULT
|
|
|
|
The socket structure address is outside the user's address space.
|
|
|
|
.TP
|
|
|
|
.B EINPROGRESS
|
2018-08-26 11:41:23 +00:00
|
|
|
The socket is nonblocking and the connection cannot be completed immediately.
|
2018-08-30 11:04:19 +00:00
|
|
|
(UNIX domain sockets failed with
|
2018-08-23 04:13:39 +00:00
|
|
|
.BR EAGAIN
|
|
|
|
instead.)
|
2008-08-08 16:41:48 +00:00
|
|
|
It is possible to
|
|
|
|
.BR select (2)
|
|
|
|
or
|
|
|
|
.BR poll (2)
|
|
|
|
for completion by selecting the socket for writing.
|
|
|
|
After
|
|
|
|
.BR select (2)
|
|
|
|
indicates writability, use
|
|
|
|
.BR getsockopt (2)
|
|
|
|
to read the
|
|
|
|
.B SO_ERROR
|
|
|
|
option at level
|
|
|
|
.B SOL_SOCKET
|
|
|
|
to determine whether
|
|
|
|
.BR connect ()
|
|
|
|
completed successfully
|
|
|
|
.RB ( SO_ERROR
|
|
|
|
is zero) or unsuccessfully
|
|
|
|
.RB ( SO_ERROR
|
|
|
|
is one of the usual error codes listed here,
|
|
|
|
explaining the reason for the failure).
|
|
|
|
.TP
|
|
|
|
.B EINTR
|
|
|
|
The system call was interrupted by a signal that was caught; see
|
|
|
|
.BR signal (7).
|
|
|
|
.\" For TCP, the connection will complete asynchronously.
|
|
|
|
.\" See http://lkml.org/lkml/2005/7/12/254
|
|
|
|
.TP
|
|
|
|
.B EISCONN
|
|
|
|
The socket is already connected.
|
|
|
|
.TP
|
|
|
|
.B ENETUNREACH
|
|
|
|
Network is unreachable.
|
|
|
|
.TP
|
|
|
|
.B ENOTSOCK
|
2015-12-27 15:20:52 +00:00
|
|
|
The file descriptor
|
|
|
|
.I sockfd
|
|
|
|
does not refer to a socket.
|
2008-08-08 16:41:48 +00:00
|
|
|
.TP
|
2014-06-25 07:00:27 +00:00
|
|
|
.B EPROTOTYPE
|
|
|
|
The socket type does not support the requested communications protocol.
|
|
|
|
This error can occur, for example,
|
|
|
|
on an attempt to connect a UNIX domain datagram socket to a stream socket.
|
|
|
|
.TP
|
2008-08-08 16:41:48 +00:00
|
|
|
.B ETIMEDOUT
|
|
|
|
Timeout while attempting connection.
|
|
|
|
The server may be too
|
|
|
|
busy to accept new connections.
|
|
|
|
Note that for IP sockets the timeout may
|
|
|
|
be very long when syncookies are enabled on the server.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH CONFORMING TO
|
2017-11-23 20:38:24 +00:00
|
|
|
POSIX.1-2001, POSIX.1-2008, SVr4, 4.4BSD,
|
|
|
|
.RB (connect ()
|
|
|
|
first appeared in 4.2BSD).
|
2008-08-08 16:41:48 +00:00
|
|
|
.\" SVr4 documents the additional
|
|
|
|
.\" general error codes
|
|
|
|
.\" .BR EADDRNOTAVAIL ,
|
|
|
|
.\" .BR EINVAL ,
|
|
|
|
.\" .BR EAFNOSUPPORT ,
|
|
|
|
.\" .BR EALREADY ,
|
|
|
|
.\" .BR EINTR ,
|
|
|
|
.\" .BR EPROTOTYPE ,
|
|
|
|
.\" and
|
|
|
|
.\" .BR ENOSR .
|
|
|
|
.\" It also
|
|
|
|
.\" documents many additional error conditions not described here.
|
|
|
|
.SH NOTES
|
2016-12-09 11:51:23 +00:00
|
|
|
For background on the
|
|
|
|
.I socklen_t
|
|
|
|
type, see
|
2008-08-08 16:41:48 +00:00
|
|
|
.BR accept (2).
|
_syscall.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fallocate.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ioprio_set.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open_by_handle_at.2, outb.2, perf_event_open.2, perfmonctl.2, personality.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, recvmmsg.2, remap_file_pages.2, rename.2, request_key.2, restart_syscall.2, rt_sigqueueinfo.2, s390_pci_mmio_write.2, s390_runtime_instr.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysinfo.2, syslog.2, tee.2, time.2, timer_create.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, utime.2, utimensat.2, vfork.2, vmsplice.2, wait.2, wait4.2, write.2: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 07:30:51 +00:00
|
|
|
.PP
|
2014-08-21 22:06:07 +00:00
|
|
|
If
|
2015-01-16 06:59:52 +00:00
|
|
|
.BR connect ()
|
2014-08-21 22:06:07 +00:00
|
|
|
fails, consider the state of the socket as unspecified.
|
|
|
|
Portable applications should close the socket and create a new one for
|
|
|
|
reconnecting.
|
2020-05-21 08:00:37 +00:00
|
|
|
.SH EXAMPLES
|
2008-08-08 16:41:48 +00:00
|
|
|
An example of the use of
|
|
|
|
.BR connect ()
|
|
|
|
is shown in
|
|
|
|
.BR getaddrinfo (3).
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH SEE ALSO
|
2008-08-08 16:41:48 +00:00
|
|
|
.BR accept (2),
|
|
|
|
.BR bind (2),
|
|
|
|
.BR getsockname (2),
|
|
|
|
.BR listen (2),
|
|
|
|
.BR socket (2),
|
connect.2: Can return EACCES because of SELinux
Recently I had to troubleshoot a problem where a connect() call
was returning EACCES:
17648 socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 37
17648 connect(37, {sa_family=AF_INET, sin_port=htons(8081),
sin_addr=inet_addr("10.12.1.201")}, 16) = -1 EACCES (Permission
denied)
I've traced this to SELinux policy denying the connection. This is
on a Fedora 23 VM:
$ cat /etc/redhat-release
Fedora release 23 (Twenty Three)
$ uname -a
Linux mako-fedora-01 4.8.13-100.fc23.x86_64 #1 SMP Fri Dec 9 14:51:40
UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
The manpage says this can happen when connecting to a broadcast
address, or when a local firewall rule blocks the connection.
However, the address above is unicast, and using 'wget' from
another account to access the URL works fine.
The context is that we're building an OS image, and this involves
downloading RPMs through a proxy. The proxy (polipo) is labelled
by SELinux, and I guess there is some sort of policy that says
"proxy can only connect to HTTP ports". When trying to connect to
a server listening on a port that is not labeled as an HTTP server
port, I guess SELinux steps in. With 'setenforce 0', the build
works fine. In the kernel sources I see connect() calls
security_socket_connect() (see
https://elixir.bootlin.com/linux/latest/source/net/socket.c#L1855),
which calls whatever security hooks are registered. I see the
SELinux hook getting registered at
https://elixir.bootlin.com/linux/latest/source/security/selinux/hooks.c#L7047,
and setting a perf probe on the call proves that the
selinux_socket_connect function gets called (while
tcp_v4_connect() is not).
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-05-29 07:11:48 +00:00
|
|
|
.BR path_resolution (7),
|
|
|
|
.BR selinux (8)
|