2010-09-27 05:41:38 +00:00
|
|
|
.\" Copyright (c) 2009 Petr Baudis <pasky@suse.cz>
|
|
|
|
.\" and clean-ups and additions (C) 2010 Michael Kerrisk <mtk.manpages@gmail.com>
|
|
|
|
.\"
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:01 +00:00
|
|
|
.\" %%%LICENSE_START(VERBATIM)
|
2010-09-27 05:41:38 +00:00
|
|
|
.\" Permission is granted to make and distribute verbatim copies of this
|
|
|
|
.\" manual provided the copyright notice and this permission notice are
|
|
|
|
.\" preserved on all copies.
|
|
|
|
.\"
|
|
|
|
.\" Permission is granted to copy and distribute modified versions of this
|
|
|
|
.\" manual under the conditions for verbatim copying, provided that the
|
|
|
|
.\" entire resulting derived work is distributed under the terms of a
|
|
|
|
.\" permission notice identical to this one.
|
|
|
|
.\"
|
|
|
|
.\" Since the Linux kernel and libraries are constantly changing, this
|
|
|
|
.\" manual page may be incorrect or out-of-date. The author(s) assume no
|
|
|
|
.\" responsibility for errors or omissions, or for damages resulting from
|
|
|
|
.\" the use of the information contained herein. The author(s) may not
|
|
|
|
.\" have taken the same level of care in the production of this manual,
|
|
|
|
.\" which is licensed free of charge, as they might when working
|
|
|
|
.\" professionally.
|
|
|
|
.\"
|
|
|
|
.\" Formatted or processed versions of this manual, if unaccompanied by
|
|
|
|
.\" the source, must acknowledge the copyright and authors of this work.
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:40 +00:00
|
|
|
.\" %%%LICENSE_END
|
2010-09-27 05:41:38 +00:00
|
|
|
.\"
|
|
|
|
.\" References: http://people.redhat.com/drepper/asynchnl.pdf,
|
|
|
|
.\" http://www.imperialviolet.org/2005/06/01/asynchronous-dns-lookups-with-glibc.html
|
|
|
|
.\"
|
intro.1, locale.1, _exit.2, access.2, bpf.2, brk.2, capget.2, chmod.2, chroot.2, clock_getres.2, clone.2, eventfd.2, fallocate.2, fork.2, getgroups.2, gethostname.2, getpid.2, getpriority.2, getrlimit.2, getrusage.2, gettid.2, iopl.2, ioprio_set.2, killpg.2, mlock.2, mprotect.2, perf_event_open.2, poll.2, posix_fadvise.2, pread.2, ptrace.2, read.2, readv.2, recv.2, rename.2, sched_setaffinity.2, sched_setattr.2, seccomp.2, select.2, send.2, seteuid.2, setgid.2, setresuid.2, setreuid.2, setuid.2, sigaltstack.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, stat.2, timer_create.2, uname.2, utimensat.2, wait.2, wait4.2, write.2, MB_LEN_MAX.3, __ppc_get_timebase.3, clearenv.3, dl_iterate_phdr.3, error.3, fexecve.3, fpurge.3, fread.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getgrent_r.3, gethostbyname.3, getifaddrs.3, getnameinfo.3, getnetent_r.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent_r.3, getrpcent.3, getrpcent_r.3, getrpcport.3, getservent.3, getservent_r.3, gsignal.3, key_setsecret.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, memcpy.3, mq_notify.3, mq_open.3, perror.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_detach.3, pthread_getattr_np.3, pthread_join.3, pthread_setname_np.3, pthread_tryjoin_np.3, putgrent.3, rcmd.3, rpc.3, rpmatch.3, sem_close.3, sem_open.3, setaliasent.3, shm_open.3, sigqueue.3, strfmon.3, xcrypt.3, xdr.3, console_codes.4, null.4, core.5, host.conf.5, hosts.equiv.5, locale.5, repertoiremap.5, locale.7, man-pages.7, pty.7, rtld-audit.7, sched.7, vdso.7: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-07-23 14:12:28 +00:00
|
|
|
.TH GETADDRINFO_A 3 2015-07-23 "GNU" "Linux Programmer's Manual"
|
2010-09-27 05:41:38 +00:00
|
|
|
.SH NAME
|
|
|
|
getaddrinfo_a, gai_suspend, gai_error, gai_cancel \- asynchronous
|
|
|
|
network address and service translation
|
|
|
|
.SH SYNOPSIS
|
|
|
|
.nf
|
getresuid.2, mremap.2, poll.2, remap_file_pages.2, setresuid.2, splice.2, sync_file_range.2, syscall.2, tee.2, vmsplice.2, INFINITY.3, aio_init.3, asprintf.3, assert_perror.3, basename.3, bsd_signal.3, canonicalize_file_name.3, clog10.3, crypt.3, dl_iterate_phdr.3, dlopen.3, encrypt.3, exp10.3, fcloseall.3, fenv.3, fopencookie.3, ftw.3, getaddrinfo_a.3, getloadavg.3, getutent.3, grantpt.3, hsearch.3, lseek64.3, memmem.3, mempcpy.3, pow10.3, program_invocation_name.3, ptsname.3, putgrent.3, sched_getcpu.3, sincos.3, strchr.3, strfry.3, strnlen.3, strptime.3, strstr.3, strverscmp.3, swab.3, sysv_signal.3, tsearch.3, unlockpt.3, wcwidth.3: Add reference to feature_test_macros(7)
Some pages simply list feature test macro requirements in
the form:
#define #GNU_SOURCE
#include <someheader.h>
For these pages, add a "See feature_test_macros(7)" comment
on the "#define" line.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-10-31 04:31:47 +00:00
|
|
|
.BR "#define _GNU_SOURCE" " /* See feature_test_macros(7) */"
|
2010-09-27 05:41:38 +00:00
|
|
|
.B #include <netdb.h>
|
|
|
|
.sp
|
|
|
|
.BI "int getaddrinfo_a(int " "mode" ", struct gaicb *" "list[]" ,
|
|
|
|
.BI " int " "nitems" ", struct sigevent *" "sevp" );
|
|
|
|
.sp
|
2014-05-19 23:02:21 +00:00
|
|
|
.BI "int gai_suspend(const struct gaicb * const " "list[]" ", int " "nitems" ,
|
|
|
|
.BI " const struct timespec *" "timeout" );
|
2010-09-27 05:41:38 +00:00
|
|
|
.sp
|
|
|
|
.BI "int gai_error(struct gaicb *" "req" );
|
|
|
|
.sp
|
|
|
|
.BI "int gai_cancel(struct gaicb *" "req" );
|
|
|
|
.sp
|
|
|
|
Link with \fI\-lanl\fP.
|
|
|
|
.fi
|
|
|
|
.SH DESCRIPTION
|
|
|
|
The
|
|
|
|
.BR getaddrinfo_a ()
|
|
|
|
function performs the same task as
|
|
|
|
.BR getaddrinfo (3),
|
|
|
|
but allows multiple name look-ups to be performed asynchronously,
|
|
|
|
with optional notification on completion of look-up operations.
|
|
|
|
|
|
|
|
The
|
|
|
|
.I mode
|
|
|
|
argument has one of the following values:
|
|
|
|
.TP
|
|
|
|
.B GAI_WAIT
|
2010-10-09 14:29:19 +00:00
|
|
|
Perform the look-ups synchronously.
|
|
|
|
The call blocks until the look-ups have completed.
|
2010-09-27 05:41:38 +00:00
|
|
|
.TP
|
|
|
|
.B GAI_NOWAIT
|
|
|
|
Perform the look-ups asynchronously.
|
|
|
|
The call returns immediately,
|
|
|
|
and the requests are resolved in the background.
|
|
|
|
See the discussion of the
|
|
|
|
.I sevp
|
|
|
|
argument below.
|
|
|
|
.PP
|
|
|
|
The array
|
|
|
|
.I list
|
|
|
|
specifies the look-up requests to process.
|
|
|
|
The
|
|
|
|
.I nitems
|
|
|
|
argument specifies the number of elements in
|
|
|
|
.IR list .
|
|
|
|
The requested look-up operations are started in parallel.
|
|
|
|
NULL elements in
|
|
|
|
.I list
|
|
|
|
are ignored.
|
|
|
|
Each request is described by a
|
|
|
|
.I gaicb
|
|
|
|
structure, defined as follows:
|
|
|
|
.sp
|
|
|
|
.in +4n
|
|
|
|
.nf
|
|
|
|
struct gaicb {
|
|
|
|
const char *ar_name;
|
|
|
|
const char *ar_service;
|
|
|
|
const struct addrinfo *ar_request;
|
|
|
|
struct addrinfo *ar_result;
|
|
|
|
};
|
|
|
|
.fi
|
|
|
|
.in
|
|
|
|
|
|
|
|
The elements of this structure correspond to the arguments of
|
|
|
|
.BR getaddrinfo (3).
|
|
|
|
Thus,
|
|
|
|
.I ar_name
|
|
|
|
corresponds to the
|
|
|
|
.I node
|
|
|
|
argument and
|
|
|
|
.I ar_service
|
|
|
|
to the
|
|
|
|
.I service
|
|
|
|
argument, identifying an Internet host and a service.
|
|
|
|
The
|
|
|
|
.I ar_request
|
|
|
|
element corresponds to the
|
|
|
|
.I hints
|
|
|
|
argument, specifying the criteria for selecting
|
|
|
|
the returned socket address structures.
|
|
|
|
Finally,
|
|
|
|
.I ar_result
|
|
|
|
corresponds to the
|
|
|
|
.I res
|
|
|
|
argument; you do not need to initialize this element,
|
|
|
|
it will be automatically set when the request
|
|
|
|
is resolved.
|
|
|
|
The
|
|
|
|
.I addrinfo
|
|
|
|
structure referenced by the last two elements is described in
|
|
|
|
.BR getaddrinfo (3).
|
|
|
|
|
|
|
|
When
|
|
|
|
.I mode
|
|
|
|
is specified as
|
2011-09-23 05:15:41 +00:00
|
|
|
.BR GAI_NOWAIT ,
|
2010-09-27 05:41:38 +00:00
|
|
|
notifications about resolved requests
|
|
|
|
can be obtained by employing the
|
|
|
|
.I sigevent
|
|
|
|
structure pointed to by the
|
|
|
|
.I sevp
|
|
|
|
argument.
|
|
|
|
For the definition and general details of this structure, see
|
|
|
|
.BR sigevent (7).
|
|
|
|
The
|
|
|
|
.I sevp\->sigev_notify
|
|
|
|
field can have the following values:
|
|
|
|
.TP
|
|
|
|
.BR SIGEV_NONE
|
|
|
|
Don't provide any notification.
|
|
|
|
.TP
|
|
|
|
.BR SIGEV_SIGNAL
|
|
|
|
When a look-up completes, generate the signal
|
|
|
|
.I sigev_signo
|
|
|
|
for the process.
|
|
|
|
See
|
|
|
|
.BR sigevent (7)
|
|
|
|
for general details.
|
|
|
|
The
|
|
|
|
.I si_code
|
|
|
|
field of the
|
|
|
|
.I siginfo_t
|
|
|
|
structure will be set to
|
|
|
|
.BR SI_ASYNCNL .
|
|
|
|
.\" si_pid and si_uid are also set, to the values of the calling process,
|
|
|
|
.\" which doesn't provide useful information, so we'll skip mentioning it.
|
|
|
|
.TP
|
|
|
|
.BR SIGEV_THREAD
|
|
|
|
When a look-up completes, invoke
|
|
|
|
.I sigev_notify_function
|
|
|
|
as if it were the start function of a new thread.
|
|
|
|
See
|
|
|
|
.BR sigevent (7)
|
|
|
|
for details.
|
|
|
|
.PP
|
2010-10-04 03:04:21 +00:00
|
|
|
For
|
2010-09-27 05:41:38 +00:00
|
|
|
.BR SIGEV_SIGNAL
|
|
|
|
and
|
|
|
|
.BR SIGEV_THREAD ,
|
|
|
|
it may be useful to point
|
|
|
|
.IR sevp\->sigev_value.sival_ptr
|
|
|
|
to
|
|
|
|
.IR list .
|
|
|
|
|
|
|
|
The
|
|
|
|
.BR gai_suspend ()
|
|
|
|
function suspends execution of the calling thread,
|
|
|
|
waiting for the completion of one or more requests in the array
|
2010-10-06 05:43:10 +00:00
|
|
|
.IR list .
|
2010-09-27 05:41:38 +00:00
|
|
|
The
|
|
|
|
.I nitems
|
|
|
|
argument specifies the size of the array
|
|
|
|
.IR list .
|
|
|
|
The call blocks until one of the following occurs:
|
|
|
|
.IP * 3
|
|
|
|
One or more of the operations in
|
|
|
|
.I list
|
|
|
|
completes.
|
|
|
|
.IP *
|
|
|
|
The call is interrupted by a signal that is caught.
|
|
|
|
.IP *
|
|
|
|
The time interval specified in
|
|
|
|
.I timeout
|
|
|
|
elapses.
|
|
|
|
This argument specifies a timeout in seconds plus nanoseconds (see
|
|
|
|
.BR nanosleep (2)
|
|
|
|
for details of the
|
|
|
|
.I timespec
|
|
|
|
structure).
|
|
|
|
If
|
|
|
|
.I timeout
|
|
|
|
is NULL, then the call blocks indefinitely
|
|
|
|
(until one of the events above occurs).
|
|
|
|
.PP
|
|
|
|
No explicit indication of which request was completed is given;
|
|
|
|
you must determine which request(s) have completed by iterating with
|
|
|
|
.BR gai_error ()
|
|
|
|
over the list of requests.
|
|
|
|
|
|
|
|
The
|
|
|
|
.BR gai_error ()
|
|
|
|
function returns the status of the request
|
|
|
|
.IR req :
|
|
|
|
either
|
|
|
|
.B EAI_INPROGRESS
|
|
|
|
if the request was not completed yet,
|
|
|
|
0 if it was handled successfully,
|
|
|
|
or an error code if the request could not be resolved.
|
|
|
|
|
|
|
|
The
|
|
|
|
.BR gai_cancel ()
|
|
|
|
function cancels the request
|
|
|
|
.IR req .
|
|
|
|
If the request has been canceled successfully,
|
|
|
|
the error status of the request will be set to
|
|
|
|
.B EAI_CANCELLED
|
|
|
|
and normal asynchronous notification will be performed.
|
|
|
|
The request cannot be canceled if it is currently being processed;
|
|
|
|
in that case, it will be handled as if
|
|
|
|
.BR gai_cancel ()
|
|
|
|
has never been called.
|
|
|
|
If
|
|
|
|
.I req
|
|
|
|
is NULL, an attempt is made to cancel all outstanding requests
|
|
|
|
that the process has made.
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH RETURN VALUE
|
2010-09-27 05:41:38 +00:00
|
|
|
The
|
|
|
|
.BR getaddrinfo_a ()
|
|
|
|
function returns 0 if all of the requests have been enqueued successfully,
|
|
|
|
or one of the following nonzero error codes:
|
|
|
|
.TP
|
|
|
|
.B EAI_AGAIN
|
|
|
|
The resources necessary to enqueue the look-up requests were not available.
|
|
|
|
The application may check the error status of each
|
|
|
|
request to determine which ones failed.
|
|
|
|
.TP
|
|
|
|
.B EAI_MEMORY
|
|
|
|
Out of memory.
|
|
|
|
.TP
|
|
|
|
.B EAI_SYSTEM
|
|
|
|
.I mode
|
|
|
|
is invalid.
|
|
|
|
.PP
|
|
|
|
The
|
|
|
|
.BR gai_suspend ()
|
|
|
|
function returns 0 if at least one of the listed requests has been completed.
|
|
|
|
Otherwise, it returns one of the following nonzero error codes:
|
|
|
|
.TP
|
|
|
|
.B EAI_AGAIN
|
|
|
|
The given timeout expired before any of the requests could be completed.
|
|
|
|
.TP
|
|
|
|
.B EAI_ALLDONE
|
|
|
|
There were no actual requests given to the function.
|
|
|
|
.TP
|
|
|
|
.B EAI_INTR
|
|
|
|
A signal has interrupted the function.
|
|
|
|
Note that this interruption might have been
|
|
|
|
caused by signal notification of some completed look-up request.
|
|
|
|
.PP
|
|
|
|
The
|
|
|
|
.BR gai_error ()
|
|
|
|
function can return
|
|
|
|
.B EAI_INPROGRESS
|
|
|
|
for an unfinished look-up request,
|
|
|
|
0 for a successfully completed look-up
|
|
|
|
(as described above), one of the error codes that could be returned by
|
|
|
|
.BR getaddrinfo (3),
|
|
|
|
or the error code
|
|
|
|
.B EAI_CANCELLED
|
|
|
|
if the request has been canceled explicitly before it could be finished.
|
|
|
|
|
|
|
|
The
|
|
|
|
.BR gai_cancel ()
|
|
|
|
function can return one of these values:
|
|
|
|
.TP
|
|
|
|
.B EAI_CANCELLED
|
|
|
|
The request has been canceled successfully.
|
|
|
|
.TP
|
|
|
|
.B EAI_NOTCANCELLED
|
|
|
|
The request has not been canceled.
|
|
|
|
.TP
|
|
|
|
.B EAI_ALLDONE
|
|
|
|
The request has already completed.
|
|
|
|
.PP
|
|
|
|
The
|
|
|
|
.BR gai_strerror (3)
|
|
|
|
function translates these error codes to a human readable string,
|
|
|
|
suitable for error reporting.
|
2015-06-11 02:04:22 +00:00
|
|
|
.SH ATTRIBUTES
|
|
|
|
For an explanation of the terms used in this section, see
|
|
|
|
.BR attributes (7).
|
|
|
|
.TS
|
|
|
|
allbox;
|
|
|
|
lbw31 lb lb
|
|
|
|
l l l.
|
|
|
|
Interface Attribute Value
|
|
|
|
T{
|
|
|
|
.BR getaddrinfo_a (),
|
|
|
|
.BR gai_suspend (),
|
|
|
|
.BR gai_error (),
|
|
|
|
.BR gai_cancel ()
|
|
|
|
T} Thread safety MT-Safe
|
|
|
|
.TE
|
|
|
|
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH CONFORMING TO
|
2010-09-27 05:41:38 +00:00
|
|
|
These functions are GNU extensions;
|
|
|
|
they first appeared in glibc in version 2.2.3.
|
|
|
|
.SH NOTES
|
|
|
|
The interface of
|
|
|
|
.BR getaddrinfo_a ()
|
|
|
|
was modeled after the
|
|
|
|
.BR lio_listio (3)
|
|
|
|
interface.
|
|
|
|
.SH EXAMPLE
|
|
|
|
Two examples are provided: a simple example that resolves
|
|
|
|
several requests in parallel synchronously, and a complex example
|
|
|
|
showing some of the asynchronous capabilities.
|
intro.1, time.1, _syscall.2, accept.2, brk.2, capget.2, faccessat.2, futimesat.2, gethostname.2, intro.2, ioprio_set.2, kill.2, madvise.2, mlock.2, mount.2, msgget.2, perf_event_open.2, poll.2, readv.2, sched_rr_get_interval.2, sched_setscheduler.2, select.2, select_tut.2, shmget.2, stat.2, timer_create.2, ustat.2, vfork.2, wait.2, alloca.3, atexit.3, catopen.3, crypt.3, dbopen.3, fenv.3, fopen.3, getaddrinfo_a.3, gethostbyname.3, getutent.3, intro.3, login.3, mallopt.3, queue.3, regex.3, sigpause.3, sigsetops.3, stdio.3, strftime.3, strptime.3, sysconf.3, ttyslot.3, undocumented.3, cciss.4, console_codes.4, hpsa.4, initrd.4, intro.4, rtc.4, st.4, tty_ioctl.4, wavelan.4, acct.5, charmap.5, dir_colors.5, hosts.5, intro.5, termcap.5, utmp.5, intro.6, armscii-8.7, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, ddp.7, epoll.7, glob.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man-pages.7, man.7, math_error.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, pthreads.7, raw.7, rtnetlink.7, signal.7, socket.7, spufs.7, svipc.7, tcp.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, intro.8: Global fix: use consistent capitalization in .SS headings
Capitalization in .SS sections across pages (and sometimes even
within a single page) is wildly inconsistent. Make it consistent.
Capitalize first word in heading, but otherwise use lower case,
except where English usage (e.g., proper nouns) or programming
language requirements (e.g., identifier names) dictate otherwise.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 14:08:38 +00:00
|
|
|
.SS Synchronous example
|
2010-09-27 05:41:38 +00:00
|
|
|
The program below simply resolves several hostnames in parallel,
|
|
|
|
giving a speed-up compared to resolving the hostnames sequentially using
|
|
|
|
.BR getaddrinfo (3).
|
|
|
|
The program might be used like this:
|
|
|
|
.in +4n
|
|
|
|
.nf
|
|
|
|
|
|
|
|
$ \fB./a.out ftp.us.kernel.org enoent.linuxfoundation.org gnu.cz\fP
|
|
|
|
ftp.us.kernel.org: 128.30.2.36
|
|
|
|
enoent.linuxfoundation.org: Name or service not known
|
|
|
|
gnu.cz: 87.236.197.13
|
|
|
|
.fi
|
|
|
|
.in
|
|
|
|
.PP
|
|
|
|
Here is the program source code
|
|
|
|
.nf
|
|
|
|
|
|
|
|
#define _GNU_SOURCE
|
|
|
|
#include <netdb.h>
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <string.h>
|
|
|
|
|
|
|
|
int
|
|
|
|
main(int argc, char *argv[])
|
|
|
|
{
|
|
|
|
int i, ret;
|
|
|
|
struct gaicb *reqs[argc \- 1];
|
|
|
|
char host[NI_MAXHOST];
|
|
|
|
struct addrinfo *res;
|
|
|
|
|
|
|
|
if (argc < 2) {
|
|
|
|
fprintf(stderr, "Usage: %s HOST...\\n", argv[0]);
|
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < argc \- 1; i++) {
|
|
|
|
reqs[i] = malloc(sizeof(*reqs[0]));
|
|
|
|
if (reqs[i] == NULL) {
|
|
|
|
perror("malloc");
|
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
memset(reqs[i], 0, sizeof(*reqs[0]));
|
|
|
|
reqs[i]\->ar_name = argv[i + 1];
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = getaddrinfo_a(GAI_WAIT, reqs, argc \- 1, NULL);
|
|
|
|
if (ret != 0) {
|
|
|
|
fprintf(stderr, "getaddrinfo_a() failed: %s\\n",
|
|
|
|
gai_strerror(ret));
|
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < argc \- 1; i++) {
|
|
|
|
printf("%s: ", reqs[i]\->ar_name);
|
|
|
|
ret = gai_error(reqs[i]);
|
|
|
|
if (ret == 0) {
|
|
|
|
res = reqs[i]\->ar_result;
|
|
|
|
|
|
|
|
ret = getnameinfo(res\->ai_addr, res\->ai_addrlen,
|
|
|
|
host, sizeof(host),
|
|
|
|
NULL, 0, NI_NUMERICHOST);
|
|
|
|
if (ret != 0) {
|
|
|
|
fprintf(stderr, "getnameinfo() failed: %s\\n",
|
|
|
|
gai_strerror(ret));
|
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
puts(host);
|
|
|
|
|
|
|
|
} else {
|
|
|
|
puts(gai_strerror(ret));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
exit(EXIT_SUCCESS);
|
|
|
|
}
|
|
|
|
.fi
|
intro.1, time.1, _syscall.2, accept.2, brk.2, capget.2, faccessat.2, futimesat.2, gethostname.2, intro.2, ioprio_set.2, kill.2, madvise.2, mlock.2, mount.2, msgget.2, perf_event_open.2, poll.2, readv.2, sched_rr_get_interval.2, sched_setscheduler.2, select.2, select_tut.2, shmget.2, stat.2, timer_create.2, ustat.2, vfork.2, wait.2, alloca.3, atexit.3, catopen.3, crypt.3, dbopen.3, fenv.3, fopen.3, getaddrinfo_a.3, gethostbyname.3, getutent.3, intro.3, login.3, mallopt.3, queue.3, regex.3, sigpause.3, sigsetops.3, stdio.3, strftime.3, strptime.3, sysconf.3, ttyslot.3, undocumented.3, cciss.4, console_codes.4, hpsa.4, initrd.4, intro.4, rtc.4, st.4, tty_ioctl.4, wavelan.4, acct.5, charmap.5, dir_colors.5, hosts.5, intro.5, termcap.5, utmp.5, intro.6, armscii-8.7, boot.7, bootparam.7, capabilities.7, cpuset.7, credentials.7, ddp.7, epoll.7, glob.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, man-pages.7, man.7, math_error.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, pthreads.7, raw.7, rtnetlink.7, signal.7, socket.7, spufs.7, svipc.7, tcp.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, intro.8: Global fix: use consistent capitalization in .SS headings
Capitalization in .SS sections across pages (and sometimes even
within a single page) is wildly inconsistent. Make it consistent.
Capitalize first word in heading, but otherwise use lower case,
except where English usage (e.g., proper nouns) or programming
language requirements (e.g., identifier names) dictate otherwise.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 14:08:38 +00:00
|
|
|
.SS Asynchronous example
|
2010-09-27 05:41:38 +00:00
|
|
|
This example shows a simple interactive
|
|
|
|
.BR getaddrinfo_a ()
|
|
|
|
front-end.
|
|
|
|
The notification facility is not demonstrated.
|
|
|
|
.PP
|
2012-03-08 15:35:19 +00:00
|
|
|
An example session might look like this:
|
2010-09-27 05:41:38 +00:00
|
|
|
.in +4n
|
|
|
|
.nf
|
|
|
|
|
|
|
|
$ \fB./a.out\fP
|
|
|
|
> a ftp.us.kernel.org enoent.linuxfoundation.org gnu.cz
|
|
|
|
> c 2
|
|
|
|
[2] gnu.cz: Request not canceled
|
|
|
|
> w 0 1
|
|
|
|
[00] ftp.us.kernel.org: Finished
|
|
|
|
> l
|
|
|
|
[00] ftp.us.kernel.org: 216.165.129.139
|
|
|
|
[01] enoent.linuxfoundation.org: Processing request in progress
|
|
|
|
[02] gnu.cz: 87.236.197.13
|
|
|
|
> l
|
|
|
|
[00] ftp.us.kernel.org: 216.165.129.139
|
|
|
|
[01] enoent.linuxfoundation.org: Name or service not known
|
|
|
|
[02] gnu.cz: 87.236.197.13
|
|
|
|
.fi
|
|
|
|
.in
|
|
|
|
.PP
|
2013-02-25 05:45:29 +00:00
|
|
|
The program source is as follows:
|
2010-09-27 05:41:38 +00:00
|
|
|
|
|
|
|
.nf
|
|
|
|
#define _GNU_SOURCE
|
|
|
|
#include <netdb.h>
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <string.h>
|
|
|
|
|
|
|
|
static struct gaicb **reqs = NULL;
|
|
|
|
static int nreqs = 0;
|
|
|
|
|
|
|
|
static char *
|
|
|
|
getcmd(void)
|
|
|
|
{
|
|
|
|
static char buf[256];
|
|
|
|
|
|
|
|
fputs("> ", stdout); fflush(stdout);
|
|
|
|
if (fgets(buf, sizeof(buf), stdin) == NULL)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
if (buf[strlen(buf) \- 1] == \(aq\\n\(aq)
|
|
|
|
buf[strlen(buf) \- 1] = 0;
|
|
|
|
|
|
|
|
return buf;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Add requests for specified hostnames */
|
|
|
|
static void
|
|
|
|
add_requests(void)
|
|
|
|
{
|
|
|
|
int nreqs_base = nreqs;
|
|
|
|
char *host;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
while ((host = strtok(NULL, " "))) {
|
|
|
|
nreqs++;
|
|
|
|
reqs = realloc(reqs, nreqs * sizeof(reqs[0]));
|
|
|
|
|
|
|
|
reqs[nreqs \- 1] = calloc(1, sizeof(*reqs[0]));
|
|
|
|
reqs[nreqs \- 1]\->ar_name = strdup(host);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Queue nreqs_base..nreqs requests. */
|
|
|
|
|
|
|
|
ret = getaddrinfo_a(GAI_NOWAIT, &reqs[nreqs_base],
|
|
|
|
nreqs \- nreqs_base, NULL);
|
|
|
|
if (ret) {
|
|
|
|
fprintf(stderr, "getaddrinfo_a() failed: %s\\n",
|
|
|
|
gai_strerror(ret));
|
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Wait until at least one of specified requests completes */
|
|
|
|
static void
|
|
|
|
wait_requests(void)
|
|
|
|
{
|
|
|
|
char *id;
|
|
|
|
int i, ret, n;
|
|
|
|
struct gaicb const **wait_reqs = calloc(nreqs, sizeof(*wait_reqs));
|
|
|
|
/* NULL elements are ignored by gai_suspend(). */
|
|
|
|
|
|
|
|
while ((id = strtok(NULL, " ")) != NULL) {
|
|
|
|
n = atoi(id);
|
|
|
|
|
|
|
|
if (n >= nreqs) {
|
|
|
|
printf("Bad request number: %s\\n", id);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
wait_reqs[n] = reqs[n];
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = gai_suspend(wait_reqs, nreqs, NULL);
|
|
|
|
if (ret) {
|
|
|
|
printf("gai_suspend(): %s\\n", gai_strerror(ret));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < nreqs; i++) {
|
|
|
|
if (wait_reqs[i] == NULL)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
ret = gai_error(reqs[i]);
|
|
|
|
if (ret == EAI_INPROGRESS)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
printf("[%02d] %s: %s\\n", i, reqs[i]\->ar_name,
|
|
|
|
ret == 0 ? "Finished" : gai_strerror(ret));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Cancel specified requests */
|
|
|
|
static void
|
|
|
|
cancel_requests(void)
|
|
|
|
{
|
|
|
|
char *id;
|
|
|
|
int ret, n;
|
|
|
|
|
|
|
|
while ((id = strtok(NULL, " ")) != NULL) {
|
|
|
|
n = atoi(id);
|
|
|
|
|
|
|
|
if (n >= nreqs) {
|
|
|
|
printf("Bad request number: %s\\n", id);
|
|
|
|
return;
|
|
|
|
}
|
2010-10-04 03:04:21 +00:00
|
|
|
|
2010-09-27 05:41:38 +00:00
|
|
|
ret = gai_cancel(reqs[n]);
|
|
|
|
printf("[%s] %s: %s\\n", id, reqs[atoi(id)]\->ar_name,
|
|
|
|
gai_strerror(ret));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* List all requests */
|
|
|
|
static void
|
|
|
|
list_requests(void)
|
|
|
|
{
|
|
|
|
int i, ret;
|
|
|
|
char host[NI_MAXHOST];
|
|
|
|
struct addrinfo *res;
|
|
|
|
|
|
|
|
for (i = 0; i < nreqs; i++) {
|
|
|
|
printf("[%02d] %s: ", i, reqs[i]\->ar_name);
|
|
|
|
ret = gai_error(reqs[i]);
|
|
|
|
|
|
|
|
if (!ret) {
|
|
|
|
res = reqs[i]\->ar_result;
|
|
|
|
|
|
|
|
ret = getnameinfo(res\->ai_addr, res\->ai_addrlen,
|
|
|
|
host, sizeof(host),
|
|
|
|
NULL, 0, NI_NUMERICHOST);
|
|
|
|
if (ret) {
|
|
|
|
fprintf(stderr, "getnameinfo() failed: %s\\n",
|
|
|
|
gai_strerror(ret));
|
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
|
|
|
puts(host);
|
|
|
|
} else {
|
|
|
|
puts(gai_strerror(ret));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
main(int argc, char *argv[])
|
|
|
|
{
|
|
|
|
char *cmdline;
|
|
|
|
char *cmd;
|
|
|
|
|
|
|
|
while ((cmdline = getcmd()) != NULL) {
|
|
|
|
cmd = strtok(cmdline, " ");
|
|
|
|
|
|
|
|
if (cmd == NULL) {
|
|
|
|
list_requests();
|
|
|
|
} else {
|
|
|
|
switch (cmd[0]) {
|
|
|
|
case \(aqa\(aq:
|
|
|
|
add_requests();
|
|
|
|
break;
|
|
|
|
case \(aqw\(aq:
|
|
|
|
wait_requests();
|
|
|
|
break;
|
|
|
|
case \(aqc\(aq:
|
|
|
|
cancel_requests();
|
|
|
|
break;
|
|
|
|
case \(aql\(aq:
|
|
|
|
list_requests();
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
fprintf(stderr, "Bad command: %c\\n", cmd[0]);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
exit(EXIT_SUCCESS);
|
|
|
|
}
|
|
|
|
.fi
|
getent.1, intro.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, flock.2, fork.2, fstatat.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_robust_list.2, get_thread_area.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kill.2, killpg.2, link.2, linkat.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, migrate_pages.2, mincore.2, mkdir.2, mkdirat.2, mknod.2, mknodat.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, openat.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pipe.2, pivot_root.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readlinkat.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, MB_CUR_MAX.3, MB_LEN_MAX.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cerf.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dlopen.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, ldexp.3, lgamma.3, lio_listio.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, longjmp.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, malloc.3, malloc_hook.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_kill_other_threads_np.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, queue.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scandirat.3, scanf.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console.4, console_codes.4, console_ioctl.4, dsp56k.4, fd.4, full.4, hd.4, hpsa.4, initrd.4, intro.4, lp.4, mem.4, mouse.4, null.4, pts.4, ram.4, random.4, rtc.4, sk98lin.4, st.4, tty.4, ttyS.4, tty_ioctl.4, vcs.4, wavelan.4, acct.5, charmap.5, dir_colors.5, filesystems.5, ftpusers.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, passwd.5, proc.5, protocols.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, termcap.5, ttytype.5, utmp.5, armscii-8.7, arp.7, ascii.7, bootparam.7, capabilities.7, charsets.7, complex.7, cp1251.7, credentials.7, ddp.7, environ.7, epoll.7, fifo.7, futex.7, glob.7, hier.7, icmp.7, inotify.7, intro.7, ip.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, koi8-r.7, koi8-u.7, locale.7, mailaddr.7, man.7, mq_overview.7, netdevice.7, netlink.7, numa.7, packet.7, path_resolution.7, pipe.7, posixoptions.7, pthreads.7, pty.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, socket.7, standards.7, suffixes.7, svipc.7, tcp.7, termio.7, time.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, utf-8.7, x25.7, nscd.8, sync.8, tzselect.8, zdump.8, zic.8: Global fix: remove unneeded double quotes in .SH headings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-02-24 18:01:36 +00:00
|
|
|
.SH SEE ALSO
|
2010-09-27 05:41:38 +00:00
|
|
|
.BR getaddrinfo (3),
|
|
|
|
.BR inet (3),
|
|
|
|
.BR lio_listio (3),
|
|
|
|
.BR hostname (7),
|
|
|
|
.BR ip (7),
|
|
|
|
.BR sigevent (7)
|