2003-09-05 15:26:58 +00:00
|
|
|
<!doctype linuxdoc system>
|
|
|
|
|
|
|
|
<article>
|
|
|
|
|
|
|
|
<title>LILO mini-HOWTO
|
|
|
|
<author>Miroslav "Misko" Skoric,
|
2010-07-19 12:44:16 +00:00
|
|
|
<tt/skoric at eunet dot rs/
|
|
|
|
<date>v3.39, 2010-07-18
|
2003-09-05 15:26:58 +00:00
|
|
|
<abstract>
|
2003-12-08 13:36:02 +00:00
|
|
|
<nidx>linux loader windows nt 2000 boot laptop hp</nidx>
|
2004-01-11 16:08:22 +00:00
|
|
|
LILO is the most used <bf/Li/nux <bf/Lo/ader for the x86 flavor of
|
2003-09-05 15:26:58 +00:00
|
|
|
Linux; I'll call it Lilo rather than LILO here because I don't
|
|
|
|
appreciate uppercase. This file describes some typical Lilo
|
|
|
|
installations. It's intended as a supplement to the Lilo User's
|
|
|
|
Guide. I think examples are informative even if your setup isn't much
|
|
|
|
like mine. I hope this saves you trouble. Since Lilo's own
|
|
|
|
documentation is very good, who's interested in the details is
|
|
|
|
referred to /usr/doc/lilo* (once upon a time said gentlemen like
|
|
|
|
Cameron Spitzer and Alessandro Rubini who have made early versions
|
|
|
|
of this document)
|
|
|
|
</abstract>
|
|
|
|
|
|
|
|
|
|
|
|
<p>
|
|
|
|
This version of Lilo mini-HOWTO is based on work of Cameron Spitzer
|
|
|
|
(<tt>cls@truffula.sj.ca.us</tt>) and Alessandro Rubini
|
|
|
|
(<tt>rubini@linux.it</tt>). There are also contributions from Tony Harris
|
|
|
|
(<tt>tony@nmr.mgh.harvard.edu</tt>) and Marc Tanguy
|
2004-08-09 13:34:25 +00:00
|
|
|
(<tt>mtanguy@ens.uvsq.fr</tt>). Well, I have used materials from
|
2003-09-05 15:26:58 +00:00
|
|
|
the authors mentioned - <bf>without changes</bf> - and added some pointers
|
|
|
|
related to configuring LILO for using with Windows NT and Windows 2000.
|
|
|
|
More detailed information about the activation of Windows NT/2000 from LILO
|
|
|
|
menu, you may find in wonderfull
|
2003-12-08 13:36:02 +00:00
|
|
|
<url url="http://tldp.org/HOWTO/Linux+WinNT.html"
|
2003-09-05 15:26:58 +00:00
|
|
|
name="Linux+WindowsNT"> mini-HOWTO.
|
|
|
|
|
|
|
|
|
|
|
|
<sect>Introduction
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Although the documentation found in Lilo's sources (the one installed
|
|
|
|
in <tt>/usr/doc/lilo</tt>-version) is very comprehensive, most Linux
|
|
|
|
users experience some trouble in building their own
|
|
|
|
<tt>/etc/lilo.conf</tt> file. This document is meant to support them
|
|
|
|
by giving the minimal information and by showing five sample
|
|
|
|
installations:
|
|
|
|
|
|
|
|
<itemize>
|
|
|
|
|
|
|
|
<item>The first example is the classical ``Linux and other'' installation.
|
|
|
|
|
|
|
|
<item>The next one shows how to install Lilo on a hard drive
|
|
|
|
connected as <tt>/dev/hdc</tt> that will boot as <tt>/dev/hda</tt>.
|
|
|
|
This is usually needed when you install a new Linux drive from
|
|
|
|
your own running system. This also tells how to boot from SCSI
|
|
|
|
disks when your BIOS is modern enough.
|
|
|
|
|
|
|
|
<item>The third example shows how to boot a Linux system whose root
|
|
|
|
partition can't be accessed by the BIOS.
|
|
|
|
|
|
|
|
<item>The next sample file is used to access huge disks, that neither the
|
|
|
|
BIOS nor DOS can access easily (this one is somehow outdated).
|
|
|
|
|
|
|
|
<item>The last example shows how to restore a damaged disk,
|
|
|
|
if the damage resulted from installing another
|
|
|
|
operating system).
|
|
|
|
|
|
|
|
</itemize>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
The last three examples are by Cameron, <tt>cls@truffula.sj.ca.us</tt>,
|
|
|
|
who wrote the original document. Alessandro <tt>rubini@linux.it</tt>
|
|
|
|
doesn't run anything but Linux, so he can't check
|
|
|
|
nor update them by himself. Needless to say, any feedback is welcome.
|
|
|
|
|
|
|
|
|
|
|
|
<sect>Background Information and Standard Installation
|
|
|
|
|
|
|
|
<p>
|
|
|
|
When Lilo boots the system, it uses BIOS calls to load the Linux
|
|
|
|
kernel off the disk (IDE drive, floppy or whatever). Therefore, the
|
|
|
|
kernel must live in some place that can be accessed by the bios.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
At boot time, Lilo is not able to read filesystem data, and any
|
|
|
|
pathname you put in <tt>/etc/lilo.conf</tt> is resolved at
|
|
|
|
installation time (when you invoke <bf>/sbin/lilo</bf>). Installation
|
|
|
|
time is when the program builds the tables that list which sectors are
|
|
|
|
used by the files used to load the operating system. As a consequence,
|
|
|
|
all of these files must live in a partition that can be accessed by
|
|
|
|
the BIOS (the files are usually located in the <tt>/boot</tt>
|
|
|
|
directory, this means that only the root partition of your Linux
|
|
|
|
system needs to be accessed via the BIOS).
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Another consequence of being BIOS-based is that you must reinstall the
|
|
|
|
loader (i.e., you must reinvoke <bf>/sbin/lilo</bf>) any time you
|
|
|
|
modify the Lilo setup. Whenever you recompile your kernel and
|
|
|
|
overwrite your old image you must reinstall Lilo.
|
|
|
|
|
|
|
|
<sect1>Where Should I Install Lilo?
|
|
|
|
|
|
|
|
<p>
|
|
|
|
The <tt/boot=/ directive in <tt>/etc/lilo.conf</tt> tells Lilo where
|
|
|
|
it should place its primary boot loader. In general, you can either
|
|
|
|
specify the master boot record (<tt>/dev/hda</tt>) or the root
|
|
|
|
partition of your Linux installation (is usually is <tt>/dev/hda1</tt>
|
|
|
|
or <tt>/dev/hda2</tt>).
|
|
|
|
|
|
|
|
<p>
|
|
|
|
If you have another operating system installed in your hard drive,
|
|
|
|
you'd better install Lilo to the root partition instead of the MBR. In
|
|
|
|
this case, you must mark the partition as ``bootable'' using the ``a''
|
|
|
|
command of <bf>fdisk</bf> or the ``b'' command of <bf>cfdisk</bf>.
|
|
|
|
If you don't overwrite the master boot sector you'll find it
|
|
|
|
easier to uninstall Linux and Lilo if needed.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Of course, you always have a way to avoid some "rules" like above. Well,
|
|
|
|
you may install Lilo to the MBR even if you already have another operating
|
|
|
|
system installed there. For example, if you installed Windows NT 4.0 as the
|
|
|
|
first operating system on your machine, then NT's boot loader was placed into
|
|
|
|
the MBR so you were able to boot NT without problems. After you installed
|
|
|
|
Linux and chose to install Lilo to the MBR, Lilo rewrote NT's boot loader.
|
|
|
|
Next time you boot your machine, you won't be able to boot NT. But, that
|
|
|
|
is no problem. You should edit your <tt>/etc/lilo.conf</tt> and add a new
|
|
|
|
entry for NT. Next time you re-boot your system, there will be the new
|
|
|
|
added NT entry under Lilo menu. The same thing happened when I installed
|
|
|
|
Windows 2000 instead of Windows NT.
|
|
|
|
|
|
|
|
<sect1>How Should I Configure my IDE Hard Drives?
|
|
|
|
|
|
|
|
<p>
|
|
|
|
I personally don't use LBA or LARGE settings in the BIOS (but I only
|
|
|
|
run Linux); they are horrible kludges forced on by design deficiencies
|
|
|
|
in the PC world. This requires that the kernel lives in the first 1024
|
|
|
|
cylinders, but this is not a problem as long as you partition your
|
|
|
|
hard drives and keep root small (as you should do anyways).
|
|
|
|
|
|
|
|
<p>
|
|
|
|
If your hard disk already carries another operating system, you won't
|
|
|
|
be able to modify the BIOS settings, or the old system won't work any
|
|
|
|
more. All recent Lilo distribution are able to deal with LBA and LARGE
|
|
|
|
disk settings.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Note that the <tt>"linear"</tt> keyword in <tt>/etc/lilo.conf</tt> can
|
|
|
|
help in dealing with geometry problems. The keyword instructs Lilo to
|
|
|
|
use linear sector addresses instead of sector/head/cylinder tuples.
|
|
|
|
Conversion to 3D addresses is delayed to run-time, therefore making
|
|
|
|
the setup more immune to geometry problems.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
If you have more than one hard disk and some of them are only used by
|
|
|
|
Linux and are not involved in the boot process, you can tell your BIOS
|
|
|
|
that they are not installed. Your system will boot more quickly and
|
|
|
|
Linux will autodetect all the disks in no time. I often switch disks
|
|
|
|
in my computers, but I never touch the BIOS configuration.
|
|
|
|
|
|
|
|
<sect1>How Can I Interact at Boot Time?
|
|
|
|
|
|
|
|
<p>
|
|
|
|
When you see the Lilo prompt, you can hit the <Tab> key to show
|
|
|
|
the list of possible choices. If Lilo is not configured to be
|
|
|
|
interactive, press and hold the <Alt> or <Shift> key
|
|
|
|
before the ``LILO'' message appears.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
If you choose to boot a Linux kernel, you can add command-line
|
|
|
|
arguments after the name of the system you choose. The kernel accepts
|
|
|
|
many command-line arguments. All the arguments are listed in the
|
|
|
|
``BootPrompt-HOWTO'' by Paul Gortmaker, and I won't replicate it
|
|
|
|
here. A few command line arguments, however, are particularly
|
|
|
|
important and worth describing here:
|
|
|
|
|
|
|
|
<itemize>
|
|
|
|
|
|
|
|
<item><tt>root=</tt>: you can tell the Linux kernel to mount as root
|
|
|
|
a different partition than the one appearing in <tt>/lilo.conf</tt>.
|
|
|
|
For example, my system has a tiny partition hosting a minimal Linux
|
|
|
|
installation, and I've been able to boot the system after
|
|
|
|
destroying my root partition by mistake.
|
|
|
|
|
|
|
|
<item><tt>init=</tt>: version 1.3.43 and newer of the Linux kernel can
|
|
|
|
execute another command instead of <bf>/sbin/init</bf>,
|
|
|
|
as specified on the command line. If you experience bad problems
|
|
|
|
during the boot process, you can access the bare system by
|
|
|
|
specifying <tt>init=/bin/sh</tt> (when you are at the shell
|
|
|
|
prompt you most likely will need to mount your disks: try
|
|
|
|
``<bf>mount -w -n -o remount /; mount -a</bf>'',
|
|
|
|
and remember to ``<bf>umount -a</bf>'' before turning off
|
|
|
|
the computer).
|
|
|
|
|
|
|
|
<item>A number: by specifying a number on the kernel command line, you
|
|
|
|
instruct <em>init</em> to enter a specific run-level (the
|
|
|
|
default is usually 3 or 2, according to the distribution you chose).
|
|
|
|
Refer to the <em>init</em> documentation, to <tt>/etc/inittab</tt>
|
|
|
|
and to <tt>/etc/rc*.d</tt> to probe further.
|
|
|
|
|
|
|
|
</itemize>
|
|
|
|
|
|
|
|
<sect1>How Can I Uninstall Lilo?
|
|
|
|
|
|
|
|
<p>
|
|
|
|
When Lilo overwrites a boot sector, it saves a backup copy in
|
|
|
|
<tt>/boot/boot.</tt><em/xxyy/, where <em/xxyy/ are the major and minor
|
|
|
|
numbers of the device, in hex. You can see the major and minor numbers
|
|
|
|
of your disk or partition by running ``<bf>ls -l
|
|
|
|
/dev/<em>/device</em></bf>''. For example, the first sector of
|
|
|
|
<tt>/dev/hda</tt> (major 3, minor 0) will be saved in
|
|
|
|
<tt>/boot/boot.0300</tt>, installing Lilo on <tt>/dev/fd0</tt> creates
|
|
|
|
<tt>/boot/boot.0200</tt> and installing on <tt>/dev/sdb3</tt> (major
|
|
|
|
8, minor 19) creates <tt>/boot/boot.0813</tt>. Note that Lilo won't
|
|
|
|
create the file if there is already one so you don't need to care about
|
|
|
|
the backup copy whenever you reinstall Lilo (for example, after
|
|
|
|
recompiling your kernel). The backup copies found in <tt>/boot/</tt>
|
|
|
|
are always the snapshot of the situation before installing any Lilo.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
If you ever need to uninstall Lilo (for example, in the unfortunate
|
|
|
|
case you need to uninstall Linux), you just need to restore the
|
|
|
|
original boot sector. If Lilo is installed in <tt>/dev/hda</tt>, just
|
|
|
|
do ``<bf>dd if=/boot/boot.0300 of=/dev/hda bs=446 count=1</bf>''
|
|
|
|
(I personally just do ``<bf>cat /boot/boot.0300 > /dev/hda</bf>'',
|
|
|
|
but this is not safe, as this will restore the original partition table as
|
|
|
|
well, which you might have modified in the meanwhile). This command is
|
|
|
|
much easier to run than trying ``<bf>fdisk /mbr</bf>'' from a DOS
|
|
|
|
shell: it allows you to cleanly remove Linux from a disk without ever
|
|
|
|
booting anything but Linux. After removing Lilo remember to run Linux'
|
|
|
|
<bf>fdisk</bf> to destroy any Linux partition (DOS' <bf>fdisk
|
|
|
|
</bf> is unable to remove non-dos partitions).
|
|
|
|
|
|
|
|
<p>
|
|
|
|
If you installed Lilo on your root partition (e.g., <tt>/dev/hda2</tt>),
|
|
|
|
nothing special needs to be done to uninstall Lilo. Just run Linux'
|
|
|
|
<bf>fdisk</bf> to remove Linux partitions from the partition
|
|
|
|
table. You must also mark the DOS partition as bootable.
|
|
|
|
|
|
|
|
<sect1>How to make a ram disk?
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<em>Notice: If you find the next section difficult to read, you may
|
|
|
|
also look for the web page:
|
|
|
|
<tt>http://surfer.nmr.mgh.harvard.edu/partition/ramdisk.html</tt>
|
|
|
|
where you would find the "original" of this contribution ...</em>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
by Tony Harris
|
|
|
|
|
|
|
|
16 Oct 2000
|
|
|
|
|
|
|
|
ram disk eenie-weenie HOWTO
|
|
|
|
|
|
|
|
<p>
|
|
|
|
If your root file system is on a device for which your kernel has no
|
|
|
|
compiled-in driver, you will need to use <tt/lilo/ to load that driver
|
|
|
|
as a module very early in the boot cycle.
|
|
|
|
There are only two easy steps:
|
|
|
|
|
|
|
|
<itemize>
|
|
|
|
<item>make a ram disk image with <bf>/mkinitrd</bf>
|
|
|
|
|
|
|
|
<item>modify <tt>lilo.conf</tt> to point to the image
|
|
|
|
|
|
|
|
</itemize>
|
|
|
|
|
|
|
|
First, I <bf>cd</bf> over to <tt>/boot</tt>:
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<verb>
|
|
|
|
System.map chain.b module-info-2.2.16-3ext3
|
|
|
|
System.map-2.2.16-3 initrd-2.2.16-3.img vmlinux-2.2.16-3
|
|
|
|
System.map-2.2.16-3ext3 vmlinux-2.2.16-3ext3
|
|
|
|
vmlinuz kernel.h
|
|
|
|
boot.b map vmlinuz-2.2.16-3
|
|
|
|
bz.2.2.15.juke.Image module-info vmlinuz-2.2.16-3ext3
|
|
|
|
bzImage-2.2.14 module-info-2.2.16-3
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Here you can see that I have a 2.2.16-3 kernel and I have added a
|
|
|
|
second kernel with ext3 support (<tt/vmlinuz-2.2.16-3ext3/). There is
|
|
|
|
already a ram disk image for my first kernel (<tt/initrd-2.2.16-3.img/)
|
|
|
|
|
|
|
|
To make a new image for the second kernel, I type the following (stuff I
|
|
|
|
type is in bold):
|
|
|
|
|
|
|
|
boot# <bf>mkinitrd initrd-2.2-16-3ext3.img 2.2.16-3ext3</bf>
|
|
|
|
|
|
|
|
<tt/mkinitrd/ is a shellscript that looks at the modules needed by my
|
|
|
|
kernel, then makes an ext2 filesystem containing them.
|
|
|
|
If we look inside the image we see this is the case:
|
|
|
|
|
|
|
|
boot# <bf>cat initrd-2.2.16-3ext3.img | gunzip > /tmp/myimage</bf>
|
|
|
|
|
|
|
|
boot# <bf>file /tmp/myimage</bf>
|
|
|
|
|
|
|
|
/tmp/myimage: Linux/i386 ext2 filesystem/
|
|
|
|
|
|
|
|
<p>
|
|
|
|
You do not have to look inside your image. Only making the image and
|
|
|
|
modifying <tt>lilo.conf</tt> are necessary steps. However, discussion of
|
|
|
|
the ramdisk image is provided for pedagogic purposes.
|
|
|
|
|
|
|
|
In order to look inside, I need to mount the image as though it were
|
|
|
|
a filesystem:
|
|
|
|
|
|
|
|
boot# <bf>mount /tmp/myimage /mnt/tmp -t ext2 -o loop=/dev/loop3</bf>
|
|
|
|
|
|
|
|
boot# <bf>ls /mnt/tmp</bf>
|
|
|
|
|
|
|
|
<tt/bin dev etc lib linuxrc/
|
|
|
|
|
|
|
|
boot# <bf>find /mnt/tmp</bf>
|
|
|
|
|
|
|
|
<tt//mnt/tmp/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/lib/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/lib/aic7xxx.o/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/bin/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/bin/sh/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/bin/insmod/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/etc/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/dev/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/dev/console/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/dev/null/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/dev/ram/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/dev/systty/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/dev/tty1/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/dev/tty2/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/dev/tty3/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/dev/tty4/
|
|
|
|
|
|
|
|
<tt//mnt/tmp/linuxrc/
|
|
|
|
|
|
|
|
The most important part of this ram disk image is <tt/aic7xxx.o/,
|
|
|
|
which is my scsi module.
|
|
|
|
|
|
|
|
Finally, I move on to the last step, modifying <tt>/etc/lilo.conf</tt>:
|
|
|
|
|
|
|
|
Here is my entry in <tt/lilo.conf/ that corresponds to the kernel and
|
|
|
|
image I just created:
|
|
|
|
|
|
|
|
<tt/image=/boot/vmlinuz-2.2.16-3ext3/
|
|
|
|
|
|
|
|
<tt/label=linux.ext3/
|
|
|
|
|
|
|
|
<tt/initrd=/boot/initrd-2.2.16-3ext3.img/
|
|
|
|
|
|
|
|
<tt/read-only/
|
|
|
|
|
|
|
|
<tt/root=/dev/hdb3/
|
|
|
|
|
|
|
|
That's it. Run <bf>/lilo</bf> as root and reboot.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
If you have problems, check out the kernel <tt/HOWTO/. There are a
|
|
|
|
couple things you need to have covered: you need your kernel modules
|
|
|
|
compiled and living in <tt>/etc/conf.modules</tt>.
|
|
|
|
|
|
|
|
|
|
|
|
<sect>The Simple Configuration
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Most Lilo installations use a configuration file like the
|
|
|
|
following one:
|
|
|
|
|
|
|
|
<verb>
|
|
|
|
boot = /dev/hda # or your root partition
|
|
|
|
delay = 10 # delay, in tenth of a second (so you can interact)
|
|
|
|
vga = 0 # optional. Use "vga=1" to get 80x50
|
|
|
|
#linear # try "linear" in case of geometry problems.
|
|
|
|
|
|
|
|
image = /boot/vmlinux # your zImage file
|
|
|
|
root = /dev/hda1 # your root partition
|
|
|
|
label = Linux # or any fancy name
|
|
|
|
read-only # mount root read-only
|
|
|
|
|
|
|
|
other = /dev/hda4 # your dos partition, if any
|
|
|
|
table = /dev/hda # the current partition table
|
|
|
|
label = dos # or any non-fancy name
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
You can have multiple ``image'' and ``other'' sections if you want. It's
|
|
|
|
not uncommon to have several kernel images configured in your
|
|
|
|
<em>lilo.conf</em>, at least if you keep up to date with kernel
|
|
|
|
development.
|
|
|
|
|
|
|
|
<sect1>How to Deal with Big Kernels
|
|
|
|
|
|
|
|
<p>
|
|
|
|
If you compile a ``zImage'' kernel and it is too big to fit in half a
|
2004-01-11 16:08:22 +00:00
|
|
|
megabyte (this is common with new 2.1 kernels), you should build a
|
2003-09-05 15:26:58 +00:00
|
|
|
``big zImage'' instead: ``<tt>make bzImage</tt>''. To boot a big
|
|
|
|
kernel image nothing special is needed, but you need version 18 or
|
|
|
|
newer of Lilo. If your installation is older, you should upgrade your
|
|
|
|
Lilo package.
|
|
|
|
|
|
|
|
<sect1>How to boot Windows NT from 'LILO boot:' menu
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Here I will give you an order of routines you have to do if you want
|
|
|
|
to have both Linux and NT entries under Lilo menu:
|
|
|
|
|
|
|
|
<itemize>
|
|
|
|
|
|
|
|
<item>First of all, I would suggest you to install a fresh copy of
|
|
|
|
Windows NT 4.0 on your hard disk. I suppose that you already
|
|
|
|
made a backup of your important data, so the NT installation
|
|
|
|
shouldn't be a problem. During the NT installation, setup is
|
|
|
|
not going to ask you where to place NT's boot loader, so it
|
|
|
|
would be placed into the MBR (Master Boot Record) of your hard
|
|
|
|
disk. But, there is a possibility for a previous content of
|
|
|
|
the MBR to remain within the MBR (especially any previous
|
|
|
|
Lilo), so I would suggest you (before installation of NT) to
|
|
|
|
boot the computer with a DOS floppy diskette having DOS version
|
|
|
|
of FDISK. At the prompt a:\ just enter the command: fdisk /mbr
|
|
|
|
and restart the computer again (without that floppy).
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<item>After you have successfully installed your NT, you will see that
|
|
|
|
it uses the whole hard disk or a specific partition of the hard
|
|
|
|
disk (depending on what you decided during the setup process).
|
2004-01-11 16:08:22 +00:00
|
|
|
So, it is advisable to 'shrink' the partition where NT resides
|
2003-09-05 15:26:58 +00:00
|
|
|
in order to make some free space on the disk. Onto that free space
|
|
|
|
you will install your Linux. After you have your NT configured
|
|
|
|
and running, you have to boot your computer using a floppy
|
|
|
|
diskette with Partition Magic utility by Power Quest. It is a
|
|
|
|
graphical tool able to see all partitions on all hard disks you
|
|
|
|
have. The best thing is that you can make some changes with your
|
|
|
|
partitions but not to destroy your existing data. One of the
|
|
|
|
available changes is to make your existing partition(s) smaller,
|
|
|
|
so to get some free space on the disk(s) for other purposes.
|
|
|
|
Although you are advised to make a backup before you make any
|
2004-01-11 16:08:22 +00:00
|
|
|
changes to the partitions, I usually practice to 'shrink' NT's
|
2003-09-05 15:26:58 +00:00
|
|
|
partition before I installed anything but NT itself (so, if
|
|
|
|
needed, a repetitive re-installation wouldn't be a problem).
|
|
|
|
Well, Partition Magic (or any other similar utility you are
|
|
|
|
familiar with) will shrink your NT's partition (either NTFS or
|
|
|
|
FAT) to a smaller measure and place it to either the beginning
|
|
|
|
or to the end of the previous measure. It means that you may
|
|
|
|
choose to have your 'shrinked' NT partition at the beginning
|
|
|
|
or at the end of your disk (I usually choose NT to be at the
|
|
|
|
beginning, so the ending part of the disk will become a 'free
|
2004-01-11 16:08:22 +00:00
|
|
|
space'). After the 'shrinking' is finished, you may re-boot your
|
2003-09-05 15:26:58 +00:00
|
|
|
NT in order to check the new situation: you may use Windows
|
|
|
|
Explorer or Disk Administrator for that.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<item>So far so good. Next step is to install your Linux. Case you
|
|
|
|
are familiar with RedHat distribution (I hope with other distros
|
|
|
|
is the same or similar), you start by putting your installation
|
|
|
|
CD in the drive and re-boot the computer). Well, when you are about
|
|
|
|
to choose what type of installation it will be (Gnome or KDE
|
|
|
|
Workstation, Custom, etc.) you may choose whatever you planned
|
|
|
|
before, but I would suggest to install a Workstation at first.
|
|
|
|
This is good because Linux setup will find automatically the
|
|
|
|
free space on the (first) hard disk, make all partitions needed
|
|
|
|
for Linux, format them properly, make majority of option by
|
|
|
|
default so you won't have much pain during the setup (later, if
|
|
|
|
you want, you may either to add missing components or re-install
|
|
|
|
Linux as Custom over the existing linux partitions). Lilo should
|
|
|
|
go to the MBR.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<item>After it looks that Linux installation is finished, you are going
|
2016-10-24 11:25:25 +00:00
|
|
|
to re-start the computer and there you will only see Lilo
|
2003-09-05 15:26:58 +00:00
|
|
|
with one Linux entry to boot (or maybe more than one Linux
|
|
|
|
entry, in case your hardware is multi-processor one). But, don't
|
|
|
|
panic! Your Windows NT is still there where you had installed it
|
|
|
|
before Linux. You should become some familiar with Linux as soon
|
|
|
|
as possible, in order to be able to find and edit your new
|
|
|
|
/etc/lilo.conf file. When you open this file for the first time,
|
|
|
|
you'll see that there is only one (or more) Linux entry. Well,
|
|
|
|
you should know the exact position (read: a partition) where
|
|
|
|
Windows NT has been installed, so you could add an appropriate
|
|
|
|
entry into /etc/lilo.conf file. After you do that, restart Lilo
|
|
|
|
and, after the next re-boot, you will have both 'linux' and 'nt'
|
|
|
|
entries under Lilo menu.
|
|
|
|
|
|
|
|
</itemize>
|
|
|
|
|
|
|
|
<sect1>How to boot Windows 2000 from 'LILO boot:' menu
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Well, you may use the same procedure as described above.
|
2003-12-08 13:36:02 +00:00
|
|
|
I suggest you to read <url url="http://tldp.org/HOWTO/Linux+WinNT.html"
|
|
|
|
name="Linux+WindowsNT"> mini-HOWTO that also talks
|
2003-09-05 15:26:58 +00:00
|
|
|
about booting Windows 2000, which is installed on the same part of disk
|
|
|
|
where Windows NT was <em>before</em>. There you'll find many useful details
|
|
|
|
regarding various Linux+WinNT/2000/98 combinations.
|
|
|
|
|
|
|
|
|
|
|
|
<sect>Installing <tt/hdc/ to Boot as <tt/hda/ and Using <tt>bios=</tt>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Lilo allows to map the kernel image from one disk and instruct the
|
|
|
|
BIOS to retrieve it from another disk. For example, it's common for me
|
|
|
|
to install Linux on a disk I connect to <tt/hdc/ (master disk of
|
|
|
|
secondary controller) and boot it as a standalong system on the primary
|
|
|
|
IDE controller of another computer. I copied the installation floppy
|
|
|
|
to a tiny partition, so I can run <em>chroot</em> in a virtual
|
|
|
|
console to install <tt/hdc/ while I use the system to do something else.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
The <em>lilo.conf</em> file I use to install Lilo looks like:
|
|
|
|
|
|
|
|
<verb>
|
|
|
|
# This file must be used from a system running off /dev/hdc
|
|
|
|
boot = /dev/hdc # overwrite MBR of hdc
|
|
|
|
disk = /dev/hdc # tell how hdc will look like:
|
|
|
|
bios = 0x80 # the bios will see it as first drive
|
|
|
|
delay = 0
|
|
|
|
vga = 0
|
|
|
|
|
|
|
|
image = /boot/vmlinux # this is on /dev/hdc1
|
|
|
|
root = /dev/hda1 # but at boot it will be hda1
|
|
|
|
label = Linux
|
|
|
|
read-only
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
This configuration file must be read by a Lilo running <bf>off
|
|
|
|
/dev/hdc1</bf>. The Lilo maps that get written the boot sector
|
|
|
|
(<tt>/dev/hdc</tt>) must refer to the files in <tt>/boot</tt>
|
|
|
|
(currently installed as hdc); such files will be accessed under hda
|
|
|
|
when this disk will be booted as a standalone system.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
I call this configuration file <tt>/mnt/etc/lilo.conf.hdc</tt>
|
|
|
|
(<tt>/mnt</tt> is where hdc is mounted during the installation. I
|
|
|
|
install Lilo by invoking ``<tt>cd /mnt; chroot . sbin/lilo -C
|
|
|
|
/etc/lilo.conf.hdc</tt>''. Refer to the manual page for
|
|
|
|
<em>chroot</em> if this looks magic.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
The ``<tt>bios=</tt>'' directive in <tt>lilo.conf</tt> is used to tell
|
|
|
|
Lilo what the BIOS thinks of your devices. BIOS calls identify floppy
|
|
|
|
disks and hard drives with a number: 0x00 and 0x01 select the floppy
|
2004-01-11 16:08:22 +00:00
|
|
|
drives, 0x80 and the following numbers select hard disks (old BIOS-es
|
2003-09-05 15:26:58 +00:00
|
|
|
can only access two disks). The meaning of ``<tt>bios = 0x80</tt> in
|
|
|
|
the previous sample file is therefore ``use 0x80 in your BIOS calls
|
|
|
|
for <tt>/dev/hdc</tt>''.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
This Lilo directive can be handy in other situations, for example when
|
|
|
|
your BIOS is able to boot from SCSI disks instead of IDE ones. When
|
|
|
|
both IDE and SCSI devices are there, Lilo can't tell whether 0x80 will
|
|
|
|
refer to one or the other because the user is able to choose it in the
|
|
|
|
BIOS configuration menus, and the BIOS can't be accessed while Linux
|
|
|
|
is running.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
By default, Lilo assumes that IDE drives are mapped first by the BIOS,
|
|
|
|
but this can be overridden by using instructions like these in
|
|
|
|
<tt>/etc/lilo.conf</tt>:
|
|
|
|
|
|
|
|
<verb>
|
|
|
|
disk = /dev/sda
|
|
|
|
bios = 0x80
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
|
|
|
|
<sect>Using Lilo When the BIOS Can't See the Root Partition
|
|
|
|
|
|
|
|
<p>
|
|
|
|
I have two IDE drives, and a SCSI drive. The SCSI drive can't be seen
|
|
|
|
from BIOS. The Linux Loader, Lilo, uses BIOS calls and can only see
|
|
|
|
drives that BIOS can see. My stupid AMI BIOS will only boot from "A:"
|
|
|
|
or "C:" My root file system is on a partition on the SCSI drive.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
The solution consists in storing the kernel, map file, and chain
|
|
|
|
loader in a Linux partition on the first IDE. Notice that it is not
|
|
|
|
necessary to keep your kernel on your root partition.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
The second partition on my first IDE (<tt>/dev/hda2</tt>, the Linux
|
|
|
|
partition used to boot the system) is mounted on <tt>/u2</tt>. Here
|
|
|
|
is the <tt>/etc/lilo.conf</tt> file I used.
|
|
|
|
|
|
|
|
<verb>
|
|
|
|
# Install Lilo on the Master Boot Record
|
|
|
|
# on the first IDE.
|
|
|
|
#
|
|
|
|
boot = /dev/hda
|
|
|
|
# /sbin/lilo (the installer) copies the Lilo boot record
|
|
|
|
# from the following file to the MBR location.
|
|
|
|
install = /u2/etc/lilo/boot.b
|
|
|
|
#
|
|
|
|
# I wrote a verbose boot menu. Lilo finds it here.
|
|
|
|
message = /u2/etc/lilo/message
|
|
|
|
# The installer will build the following file. It tells
|
|
|
|
# the boot-loader where the blocks of the kernels are.
|
|
|
|
map = /u2/etc/lilo/map
|
|
|
|
compact
|
|
|
|
prompt
|
|
|
|
# Wait 10 seconds, then boot the 1.2.1 kernel by default.
|
|
|
|
timeout = 100
|
|
|
|
# The kernel is stored where BIOS can see it by doing this:
|
|
|
|
# cp -p /usr/src/linux/arch/i386/boot/zImage /u2/z1.2.1
|
|
|
|
image = /u2/z1.2.1
|
|
|
|
label = 1.2.1
|
|
|
|
# Lilo tells the kernel to mount the first SCSI partition
|
|
|
|
# as root. BIOS does not have to be able to see it.
|
|
|
|
root = /dev/sda1
|
|
|
|
# This partition will be checked and remounted by /etc/rc.d/rc.S
|
|
|
|
read-only
|
|
|
|
# I kept an old Slackware kernel lying around in case I built a
|
|
|
|
# kernel that doesn't work. I actually needed this once.
|
|
|
|
image = /u2/z1.0.9
|
|
|
|
label = 1.0.9
|
|
|
|
root = /dev/sda1
|
|
|
|
read-only
|
|
|
|
# My DR-DOS 6 partition.
|
|
|
|
other = /dev/hda1
|
|
|
|
loader=/u2/etc/lilo/chain.b
|
|
|
|
label = dos
|
|
|
|
alias = m
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
|
|
|
|
<sect>How do i know the BIOS number for my SCSI disks
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<em>
|
|
|
|
The contribution from Marc Tanguy (mtanguy@ens.uvsq.fr), 2001-09-27
|
|
|
|
</em>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<sect1> The theory
|
|
|
|
<p>
|
|
|
|
Actually, it exists two ways to know it :
|
|
|
|
|
|
|
|
<p>
|
|
|
|
If you have an adaptec scsi card (2940u2, 29160, 39160), you simply
|
|
|
|
use the 'diagnose' mode (using BIOS v3.10.0 recommended). It must be
|
|
|
|
activated in the scsi card BIOS menu.
|
|
|
|
Then you just have to wait and see something like :
|
|
|
|
|
|
|
|
<table loc="ht!">
|
|
|
|
<tabular ca="lcllllllll">
|
|
|
|
... | ID | LUN | Vendor | Product | Rev | Size | Sync | Bus |
|
|
|
|
<bf/HD#/ @
|
|
|
|
... | 0 | 0 | QUANTUM | ATLAS10K2 | DDD6 | 17GB | 160 | 16 |
|
|
|
|
<bf/80h/ @
|
|
|
|
... | 1 | 0 | QUANTUM | ATLAS10K2 | DDD6 | 17GB | 160 | 16 |
|
|
|
|
<bf/81h/ @
|
|
|
|
... | 2 | 0 | IBM | DDRS | DC1B | 4GB | 80 | 16 |
|
|
|
|
<bf/82h/ @
|
|
|
|
... | 3 | 0 | IBM | DNES | SAH0 | 9GB | 80 | 16 |
|
|
|
|
<bf/83h/
|
|
|
|
</tabular>
|
|
|
|
</table>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
If you don't own an adaptec card, you have to
|
|
|
|
know what is the 'booting' disk (usually ID 0, but not necessary, it
|
|
|
|
can be defined in the scsi card BIOS) where LILO is going to be found
|
|
|
|
and start : this is the first disk so it has number 0x80.
|
|
|
|
Then it's very simple, the BIOS follows the IDs.
|
|
|
|
|
|
|
|
<p>
|
2004-01-11 16:08:22 +00:00
|
|
|
By example :
|
2003-09-05 15:26:58 +00:00
|
|
|
|
|
|
|
<verb>
|
|
|
|
ID 0 -> boot -> 0x80
|
|
|
|
ID 1 -> empty
|
|
|
|
ID 2 -> disk -> 0x81
|
|
|
|
ID 3 -> disk -> 0x82
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
or
|
|
|
|
|
|
|
|
<verb>
|
|
|
|
ID 0 -> disk -> 0x81
|
|
|
|
ID 1 -> empty
|
|
|
|
ID 2 -> disk -> 0x82
|
|
|
|
ID 3 -> boot -> 0x80
|
|
|
|
ID 4 -> disk -> 0x83
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
This part doesn't care at all of what is installed on the scsi drives.
|
|
|
|
But you should note that if you use an ID higher than the SCSI adapter it c
|
|
|
|
an
|
|
|
|
be a problem. So you should always try to set the SCSI adapter ID after the
|
|
|
|
SCSI devices IDs.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<sect1> How to swap linux and NT booting ?
|
|
|
|
<p>
|
2004-01-11 16:08:22 +00:00
|
|
|
OK, but NT must be the first disk to boot, so i want it in 0x80, but i
|
2003-09-05 15:26:58 +00:00
|
|
|
already have LILO and a full ext2 only drive on 0x80 and my NT drive is
|
|
|
|
in 0x83. How can i 'swap' linux and NT ?
|
|
|
|
This a very easy : you just have to tell BIOS that NT drive is now 0x80
|
|
|
|
and the Linux drive is 0x83.
|
|
|
|
|
|
|
|
<verb>
|
|
|
|
other=/dev/sdd1
|
|
|
|
label=nt
|
|
|
|
map-drive = 0x83
|
|
|
|
to = 0x80
|
|
|
|
map-drive = 0x80
|
|
|
|
to = 0x83
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
This change will produce a warning :
|
|
|
|
<verb>
|
|
|
|
Warning: BIOS drive 0x8? may not be accessible
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
but if you know what you are doing it will run without problem.
|
|
|
|
|
|
|
|
I used it on this configuration which has a Red Hat Linux 7.1 and a Windows
|
|
|
|
2000 Pro :
|
|
|
|
|
|
|
|
<verb>
|
|
|
|
Name Flags Part Type FS Type [Label] Size (MB)
|
|
|
|
|
|
|
|
Disk Drive: /dev/sda - 0x80
|
|
|
|
sda1 Boot Primary Linux ext2 [/boot] 24.68
|
|
|
|
sda2 Primary Linux Swap 139.83
|
|
|
|
sda3 Primary Linux ext2 [/usr] 3150.29
|
|
|
|
sda4 Primary Linux ext2 [/home] 15044.04
|
|
|
|
|
|
|
|
Disk Drive: /dev/sdb - 0x81
|
|
|
|
sdb1 Primary Linux Swap 139.83
|
|
|
|
sdb2 Primary Linux ext2 [/] 3150.29
|
|
|
|
sdb3 Primary Linux ext2 [/opt] 1052.84
|
|
|
|
sdb4 Primary Linux ext2 [/public] 14015.88
|
|
|
|
|
|
|
|
Disk Drive: /dev/sdc - 0x82
|
|
|
|
sdc1 Primary Linux ext2 [/var] 1052.84
|
|
|
|
sdc2 Primary Linux ext2 [/tmp] 106.93
|
|
|
|
sdc3 Primary Linux ext2 [/cache] 1052.84
|
|
|
|
sdc4 Primary Linux ext2 [/chroot] 2352.44
|
|
|
|
|
|
|
|
Disk Drive: /dev/sdd - 0x83
|
|
|
|
sdd1 Boot Primary NTFS [WINDOWS_2000] 9162.97
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
My full /etc/lilo.conf :
|
|
|
|
<verb>
|
|
|
|
boot=/dev/sda
|
|
|
|
map=/boot/map
|
|
|
|
install=/boot/boot.b
|
|
|
|
prompt
|
|
|
|
default=Linux
|
|
|
|
read-only
|
|
|
|
compact
|
|
|
|
image=/boot/vmlinuz
|
|
|
|
label=Linux
|
|
|
|
root=/dev/sdb2
|
|
|
|
other=/dev/sdd1
|
|
|
|
label=Windows
|
|
|
|
map-drive = 0x83
|
|
|
|
to = 0x80
|
|
|
|
map-drive = 0x80
|
|
|
|
to = 0x83
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<sect1> Miscellaneous
|
|
|
|
|
|
|
|
<p>
|
|
|
|
I just plugged a new scsi drive, and now LILO refuse to boot, what's
|
|
|
|
going on ?
|
|
|
|
|
|
|
|
When you plug a disk, you must be careful with the IDs. If you add a drive
|
|
|
|
between two already plugged disks the BIOS numbers are changed :
|
|
|
|
|
|
|
|
<verb>
|
|
|
|
Before ----> After
|
|
|
|
scsi id - - BIOS id scsi id - - BIOS id
|
|
|
|
ID 0 - disk - 0x80 ID 0 - disk - 0x80
|
|
|
|
ID 1 - empty ID 1 - new disk - 0x81
|
|
|
|
ID 2 - disk - 0x81 ID 2 - disk - 0x82 !!
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
If you change the BIOS ids, you have to re-evaluate them.
|
|
|
|
|
|
|
|
|
|
|
|
<sect>Accessing Huge Disks When the BIOS Can't
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<em>Notice: 1GB is "Huge"? Well, once upon a time...</em>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
The system in my office has a 1GB IDE drive. The BIOS can only see
|
|
|
|
the first 504 MB of the IDE. (Where MB means 2**10 bytes, not 10**6
|
|
|
|
bytes.) So I have MS-DOS on a 350 MB partition <tt>/dev/hda1</tt> and
|
|
|
|
my Linux root on a 120 MB partition <tt>/dev/hda2</tt>.
|
|
|
|
|
|
|
|
<p>
|
2004-01-11 16:08:22 +00:00
|
|
|
<em>Hauke Laging (hauke@laging.de) and Bob Hall (bhall@hallfire.org)
|
2003-09-05 15:26:58 +00:00
|
|
|
have noticed a small mistake above, so they've suggested a MB to be
|
|
|
|
2**20 bytes rather than 2**10 bytes. Thanks for correction. In
|
|
|
|
addition, Hauke would like to learn more about what he called,
|
|
|
|
"character codes on LILO startup, when LILO dies with LI, LI-, LIL-
|
|
|
|
or whatever". I'd appreciate a contribution related to this issue or
|
|
|
|
a valid web link to that.</em>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Here it is (a contribution by Zohar Stolar, zohar@numericable.fr):
|
|
|
|
|
|
|
|
<bf>B. LILO boot error codes</bf>
|
|
|
|
<p>
|
|
|
|
<url url="http://www.tldp.org/HOWTO/Bootdisk-HOWTO/a1483.html"
|
|
|
|
name="http://www.tldp.org/HOWTO/Bootdisk-HOWTO/a1483.html">
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thanks for link.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
MS-DOS was unable to install itself correctly when the drive was
|
|
|
|
fresh. Novell DOS 7 had the same problem. Luckily for me, "Options
|
|
|
|
by IBM" forgot to put the "OnTrack" diskette in the box with the
|
|
|
|
drive. The drive was supposed to come with a product called "OnTrack
|
|
|
|
Disk Manager." If you only have MSDOS, I guess you have to use it.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
So I made a partition table with Linux' fdisk. MSDOS-6.2 refused to
|
|
|
|
install itself in <tt>/dev/hda1</tt>. It said something like ``this
|
|
|
|
release of MS-DOS is for new installations. Your computer already has
|
|
|
|
MS-DOS so you need to get an upgrade release from your dealer.''
|
|
|
|
Actually, the disk was brand new.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
What a crock! So I ran Linux' fdisk again and deleted partition 1
|
|
|
|
from the table. This satisfied MS-DOS 6.2 which proceeded to create
|
|
|
|
the exact same partition 1 I had just deleted and installed itself.
|
|
|
|
MS-DOS 6.2 wrote its Master Boot Record on the drive, but it couldn't
|
|
|
|
boot.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Luckily I had a Slackware kernel on floppy (made by the Slackware
|
|
|
|
installation program "setup"), so I booted Linux and wrote Lilo over
|
|
|
|
MS-DOS' broken MBR. This works. Here is the <tt>/etc/lilo.conf</tt>
|
|
|
|
file I used:
|
|
|
|
|
|
|
|
<verb>
|
|
|
|
boot = /dev/hda
|
|
|
|
map = /lilo-map
|
|
|
|
delay = 100
|
|
|
|
ramdisk = 0 # Turns off ramdisk in Slackware kernel
|
|
|
|
timeout = 100
|
|
|
|
prompt
|
|
|
|
disk = /dev/hda # BIOS only sees first 500 MB.
|
|
|
|
bios = 0x80 # specifies the first IDE.
|
|
|
|
sectors = 63 # get the numbers from your drive's docs.
|
|
|
|
heads = 16
|
|
|
|
cylinders = 2100
|
|
|
|
image = /vmlinuz
|
|
|
|
append = "hd=2100,16,63"
|
|
|
|
root = /dev/hda2
|
|
|
|
label = linux
|
|
|
|
read-only
|
|
|
|
vga = extended
|
|
|
|
other = /dev/hda1
|
|
|
|
label = msdos
|
|
|
|
table = /dev/hda
|
|
|
|
loader = /boot/chain.b
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
After I installed these systems, I verified that the partition
|
|
|
|
containing the zImage, boot.b, map, chain.b, and message files can use
|
|
|
|
an msdos file system, as long as it is not "stackered" or
|
|
|
|
"doublespaced." So I could have made the DOS partition on
|
|
|
|
<tt>/dev/hda1</tt> 500 MB.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
I have also learned that "OnTrack" would have written a partition
|
|
|
|
table starting a few dozen bytes into the drive, instead of at the
|
|
|
|
beginning, and it is possible to hack the Linux IDE driver to work
|
|
|
|
around this problem. But installing would have been impossible with
|
|
|
|
the precompiled Slackware kernel. Eventually, IBM sent me an
|
|
|
|
"OnTrack" diskette. I called OnTrack's technical support. They told
|
|
|
|
me Linux is broken because Linux doesn't use BIOS. I gave their
|
|
|
|
diskette away.
|
|
|
|
|
|
|
|
|
|
|
|
<sect>Booting from a Rescue Floppy
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Next, I installed Windows-95 on my office system. It blew away my nice
|
|
|
|
Lilo MBR, but it left my Linux partitions alone. Kernels take a long
|
|
|
|
time to load from floppy, so I made a floppy with a working Lilo setup
|
|
|
|
on it, which could boot my kernel from the IDE.
|
|
|
|
|
|
|
|
I made the lilo floppy like so:
|
|
|
|
<verb>
|
|
|
|
fdformat /dev/fd0H1440 # lay tracks on virgin diskette
|
|
|
|
mkfs -t minix /dev/fd0 1440 # make file system of type minix
|
|
|
|
mount /dev/fd0 /mnt # mount in the standard tmp mount point
|
|
|
|
cp -p /boot/chain.b /mnt # copy the chain loader over
|
|
|
|
lilo -C /etc/lilo.flop # install Lilo and the map on the diskette.
|
|
|
|
umount /mnt
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Notice that the diskette <bf>must be mounted when you run the
|
|
|
|
installer</bf> so that Lilo can write its map file properly.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
This file is /etc/lilo.flop. It's almost the same as the last one:
|
|
|
|
|
|
|
|
<verb>
|
|
|
|
# Makes a floppy that can boot kernels from HD.
|
|
|
|
boot = /dev/fd0
|
|
|
|
map = /mnt/lilo-map
|
|
|
|
delay = 100
|
|
|
|
ramdisk = 0
|
|
|
|
timeout = 100
|
|
|
|
prompt
|
|
|
|
disk = /dev/hda # 1 GB IDE, BIOS only sees first 500 MB.
|
|
|
|
bios=0x80
|
|
|
|
sectors = 63
|
|
|
|
heads = 16
|
|
|
|
cylinders = 2100
|
|
|
|
image = /vmlinuz
|
|
|
|
append = "hd=2100,16,63"
|
|
|
|
root = /dev/hda2
|
|
|
|
label = linux
|
|
|
|
read-only
|
|
|
|
vga = extended
|
|
|
|
other = /dev/hda1
|
|
|
|
label = msdos
|
|
|
|
table = /dev/hda
|
|
|
|
loader = /mnt/chain.b
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
Finally, I needed MS-DOS 6.2 on my office system, but I didn't
|
|
|
|
want to touch the first drive. I added a SCSI controller and
|
|
|
|
drive, made an msdos file system on it with Linux' mkdosfs, and
|
|
|
|
Windows-95 sees it as "D:". But of course MSDOS will not boot
|
|
|
|
off of D:. This is not a problem when you have Lilo. I added
|
|
|
|
the following to the <tt>lilo.conf</tt> in Example 2.
|
|
|
|
|
|
|
|
<verb>
|
|
|
|
other = /dev/sda1
|
|
|
|
label = d6.2
|
|
|
|
table = /dev/sda
|
|
|
|
loader = /boot/any_d.b
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
With this modification MSDOS-6.2 runs, and it thinks it is on C: and
|
|
|
|
Windows-95 is on D:.
|
|
|
|
|
|
|
|
|
2003-12-08 13:36:02 +00:00
|
|
|
<sect>LILO after the installation of Mandrake Linux 9.1 on HP products
|
|
|
|
|
|
|
|
<p>
|
|
|
|
2003-11-19
|
|
|
|
<p>
|
|
|
|
<sect1>Description of the products used in this experiment
|
|
|
|
<p>
|
|
|
|
<em>Notice: Folks, that part is <bf>NOT</bf> a commercial for HP
|
|
|
|
production of any means! In fact, a series of HP computers I have been using
|
|
|
|
has delivered failures in power supply units, problems with hard disks etc.
|
|
|
|
On the other side, laptop's batteries get exhausted earlier than expected.
|
|
|
|
Other than these issues, HP machines are fine.</em>
|
|
|
|
<p>
|
|
|
|
<bf>HP Omnibook 6000</bf>
|
|
|
|
|
|
|
|
A laptop computer Omnibook 6000 is equipped with a 'bootable' DVD
|
|
|
|
drive and recently, at an ICT conference, I bought a bootable DVD-ROM
|
|
|
|
with Mandrake Linux 9.1 installation. After booting the laptop with
|
|
|
|
that bootable DVD, it gets directly to the Linux installation menu.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<bf>HP Vectra VL420 (used as a server)</bf>
|
|
|
|
|
|
|
|
In opposite, an HP Vectra VL420 doesn't have a DVD drive (it only
|
|
|
|
has a CD drive), so the direct installation from that particular
|
|
|
|
installation DVD is not possible. But, an option of making
|
|
|
|
a bootable floppy disk for starting the installation procedure
|
|
|
|
<em>is</em> possible. In fact, several boot images are available
|
|
|
|
for those users who don't have (bootable or not) DVD drive. One
|
|
|
|
of the images is a 'network' one. That means, in a local area network
|
|
|
|
there has to be either a NFS, FTP or HTTP server from which the
|
|
|
|
installation will take place.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<bf>HP Vectra VL420 (used as a workstation)</bf>
|
|
|
|
|
|
|
|
Another VL420 desktop system I also use, has a spare HDD from a
|
|
|
|
previous Windows 2000 server installation (actually, that IDE disk was moved
|
|
|
|
from the other computer where it was a primary one and here it is the second
|
|
|
|
one disk for backup data). The nice things is that it has a HTTP and FTP
|
|
|
|
servers installed (of course, usable if the system is boot from that disk).
|
|
|
|
That was good so I could use one of these servers now.
|
|
|
|
|
|
|
|
So, I made a 'network' bootable floppy and booted the first Vectra
|
|
|
|
VL420 (intended to be a Linux server) with it. After a while, it
|
|
|
|
came to a point to choose the installation method (NFS or FTP or
|
|
|
|
HTTP server). At first, I wanted to use the second 'spare' HTTP
|
|
|
|
server at the other Vectra mentioned above, but regardless of what
|
|
|
|
permission I tried to give to the 'Everyone' group of Windows users,
|
|
|
|
I always got the following answer from the Linux setup:
|
|
|
|
|
|
|
|
Error: Couldn't get file ... (or something like that)
|
|
|
|
|
|
|
|
Then I tried to use the FTP 'spare' server from the second Vectra and at
|
|
|
|
first it also asked for local and remote IP addresses. That time successfully,
|
|
|
|
it started to load a part of the remote Linux files into its memory without
|
|
|
|
any complaint. Soon after, it came to the very same position as Omnibook
|
|
|
|
6000 did: it got directly to the installation menu, asking a user to choose
|
|
|
|
a language for the installation use.
|
|
|
|
|
2009-08-05 19:19:41 +00:00
|
|
|
>From that point, the setup process was almost the same...
|
2003-12-08 13:36:02 +00:00
|
|
|
|
|
|
|
I have chosen/confirmed the following items:
|
|
|
|
|
|
|
|
- a language to use, besides English(American) as default: I added
|
|
|
|
Unicode and Serbian (both Cyrillic and Latin);
|
|
|
|
- a mouse and keyboard;
|
|
|
|
- a security level - I accepted defaults: 'Standard' for laptop and 'Higher'
|
|
|
|
for server;
|
|
|
|
|
|
|
|
The next important task was to choose one of <em>DrakX</em>
|
|
|
|
partitioning options:
|
|
|
|
|
|
|
|
- for laptop I chose the 'Use the free space on the Windows
|
|
|
|
partition', because the laptop has one IDE hard disk and I wanted
|
|
|
|
it to use a part of it for Linux (besides existing Windows 2000 Prof.
|
|
|
|
already installed). Windows' Disk Management reported:
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<verb>
|
|
|
|
Disk 0 15 MB FAT (HP Diagnostics or like)
|
|
|
|
7.13 GB FAT32 (C: "HPNOTEBOOK")
|
|
|
|
20.80 GB Free space
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
The two partitions (FAT & FAT32) were made during the installation
|
|
|
|
procedure using HP's supplied installation CD's.
|
|
|
|
|
|
|
|
At the first moment, Linux setup complained that my Windows partition
|
|
|
|
"was too fragmented" and required me to reboot under Windows, run
|
|
|
|
the "defrag" utility, then restart the Mandrake Linux installation.
|
2004-01-11 16:08:22 +00:00
|
|
|
The defragmentation process have taken cca. 1.5 hour to be completed!
|
2003-12-08 13:36:02 +00:00
|
|
|
When restarted the setup, it wanted to use 7.13 GB Windows partition,
|
|
|
|
instead of 20.80 GB. I chose to 'Use the free space'. Then it made partitions
|
|
|
|
for Linux: /dev/hda5 and /dev/hda7.
|
|
|
|
|
|
|
|
- for Vectra VL420 I used 'Custom disk partitioning' because there
|
|
|
|
I had two SCSI disks, one of them running Windows 2000 Server
|
|
|
|
already installed, and the other one I wanted to use entirely for a
|
2004-01-11 16:08:22 +00:00
|
|
|
Linux server. BTW, I wasn't sure what the option 'Erase entire disk'
|
2003-12-08 13:36:02 +00:00
|
|
|
would do during its next step (erase a whole disk or a partition?),
|
|
|
|
although it also may be the proper solution too. <em>DrakX</em>
|
|
|
|
recognized the two SCSI disks as <bf>sda</bf> and <bf>sdb</bf>
|
|
|
|
and I chose <bf>sdb</bf> to install Linux. The first step was to 'Clear
|
|
|
|
all' and after that to 'Auto allocate' the space on that second disk.
|
|
|
|
Finally, after a 'Done' it appeared to make /dev/sdb1 and /dev/sdb6
|
|
|
|
Linux partitions.
|
|
|
|
|
|
|
|
<sect1>What does LILO looks like on these HP products
|
|
|
|
<p>
|
|
|
|
<bf>HP Omnibook 6000</bf>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<verb>
|
|
|
|
boot=/dev/hda
|
|
|
|
map=/boot/map
|
|
|
|
vga=normal
|
|
|
|
default="windows"
|
|
|
|
keytable=/boot/us.klt
|
|
|
|
prompt
|
|
|
|
nowarn
|
|
|
|
timeout=100
|
|
|
|
message=/boot/message
|
|
|
|
menu-scheme=wb:bw:wb:bw
|
|
|
|
image=/boot/vmlinuz
|
|
|
|
label="linux"
|
|
|
|
root=/dev/hda5
|
|
|
|
initrd=/boot/initrd.img
|
|
|
|
append="quiet devfs=mount acpi=off"
|
|
|
|
read-only
|
|
|
|
image=/boot/vmlinuz
|
|
|
|
label="failsafe"
|
|
|
|
root=/dev/hda5
|
|
|
|
initrd=/boot/initrd.img
|
|
|
|
append="failsafe devfs=nomount acpi=off"
|
|
|
|
read-only
|
|
|
|
other=/dev/hda2 <--- /dev/hda1 seems to be reserved for some HP diags.
|
|
|
|
label="windows"
|
|
|
|
table=/dev/hda
|
|
|
|
other=/dev/fd0
|
|
|
|
label="floppy"
|
|
|
|
unsafe
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<bf>HP Vectra VL420 (installed as a desktop client Linux system)</bf>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<verb>
|
|
|
|
boot=/dev/hda
|
|
|
|
map=/boot/map
|
|
|
|
vga=normal
|
|
|
|
default="windows"
|
|
|
|
keytable=/boot/us.klt
|
|
|
|
prompt
|
|
|
|
nowarn
|
|
|
|
timeout=100
|
|
|
|
message=/boot/message
|
|
|
|
menu-scheme=wb:bw:wb:bw
|
|
|
|
image=/boot/vmlinuz
|
|
|
|
label="linux"
|
|
|
|
root=/dev/hda5
|
|
|
|
initrd=/boot/initrd.img
|
|
|
|
append="quiet devfs=mount acpi=off"
|
|
|
|
vga=788 <--- that line is missing at laptop with LCD screen above.
|
|
|
|
read-only
|
|
|
|
image=/boot/vmlinuz
|
|
|
|
label="linux-nonfb"
|
|
|
|
root=/dev/hda5
|
|
|
|
initrd=/boot/initrd.img
|
|
|
|
append="devfs=mount acpi=off"
|
|
|
|
read-only
|
|
|
|
image=/boot/vmlinuz
|
|
|
|
label="failsafe"
|
|
|
|
root=/dev/hda5
|
|
|
|
initrd=/boot/initrd.img
|
|
|
|
append="failsafe devfs=nomount acpi=off"
|
|
|
|
read-only
|
|
|
|
other=/dev/hda1 <--- /dev/hda1 seems not to be reserved for HP diags here.
|
|
|
|
label="windows" There I have Windows 2000 Professional already
|
|
|
|
table=/dev/hda installed (probably without HP's supplied CD's).
|
|
|
|
other=/dev/hdb1 <--- that is the spare disk with Windows 2000 Server.
|
|
|
|
label="windows2" Actually I had some data on it and used it as a
|
|
|
|
table=/dev/hdb second, backup disk on that desktop workstation.
|
|
|
|
map-drive=0x80 I have never tried to boot the computer from it, but
|
|
|
|
to=0x81 Mandrake's setup offered it as a boot option.
|
|
|
|
map-drive=0x81 (And that was useful as a FTP server, needed to install
|
|
|
|
to=0x80 Mandrake Linux on the other box - without DVD drive too).
|
|
|
|
other=/dev/fd0
|
|
|
|
label="floppy"
|
|
|
|
unsafe
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<bf>HP Vectra VL420 (installed as a desktop Linux system with server features)</bf>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<verb>
|
|
|
|
boot=/dev/sda <--- /dev/sda is the first SCSI disk where LILO resides (MBR).
|
|
|
|
map=/boot/map
|
|
|
|
vga=normal
|
|
|
|
default="windows"
|
|
|
|
keytable=/boot/us.klt
|
|
|
|
prompt
|
|
|
|
nowarn
|
|
|
|
timeout=100
|
|
|
|
message=/boot/message
|
|
|
|
menu-scheme=wb:bw:wb:bw
|
|
|
|
image=/boot/vmlinuz
|
|
|
|
label="linux"
|
|
|
|
root=/dev/sdb1 <--- /dev/sdb1 is the second SCSI disk where Linux resides.
|
|
|
|
initrd=/boot/initrd.img
|
|
|
|
append="quiet devfs=mount acpi=off"
|
|
|
|
vga=788
|
|
|
|
read-only
|
|
|
|
image=/boot/vmlinuz
|
|
|
|
label="linux-nonfb"
|
|
|
|
root=/dev/sdb1
|
|
|
|
initrd=/boot/initrd.img
|
|
|
|
append="devfs=mount acpi=off"
|
|
|
|
read-only
|
|
|
|
image=/boot/vmlinuz-secure
|
|
|
|
label="linux-secure" <--- something related to the Linux server security?
|
|
|
|
root=/dev/sdb1
|
|
|
|
initrd=/boot/initrd-secure.img
|
|
|
|
append="quiet devfs=mount acpi=off"
|
|
|
|
read-only
|
|
|
|
image=/boot/vmlinuz
|
|
|
|
label="failsafe"
|
|
|
|
root=/dev/sdb1
|
|
|
|
initrd=/boot/initrd.img
|
|
|
|
append="failsafe devfs=nomount acpi=off"
|
|
|
|
read-only
|
|
|
|
other=/dev/sda1 <--- /dev/sda1 is the first partition on the first SCSI disk where Windows resides.
|
|
|
|
label="windows"
|
|
|
|
table=/dev/sda
|
|
|
|
</verb>
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<sect1>Conclusions
|
|
|
|
|
|
|
|
<p>
|
|
|
|
>From the examples above, you could see that I have been using
|
|
|
|
various computer forms with also various types of hard disk.
|
|
|
|
Somewhere there is only one IDE drive, somewhere else there are
|
|
|
|
two of them, otherwise there are a couple of SCSI drives etc. Regardless
|
|
|
|
of that, I always tried to put LILO into the MBR - located on the <em>first</em>
|
|
|
|
disk. Now it looks like that Linux finally managed to solve the old
|
|
|
|
<em>1024 cyl</em> problem. In fact, LILO seems to be capable to boot
|
|
|
|
Linux regardless it is placed close to the rest of Linux partitions or not.
|
|
|
|
|
|
|
|
<p>
|
|
|
|
There are some other considerations related to the experiment above,
|
|
|
|
but they are part of the other fine document:
|
|
|
|
<url url="http://tldp.org/HOWTO/Linux+WinNT.html"
|
|
|
|
name="Linux+WindowsNT"> mini-HOWTO.
|
|
|
|
|
|
|
|
|
2003-09-05 15:26:58 +00:00
|
|
|
<p>
|
|
|
|
<sect>Bibliography
|
|
|
|
|
|
|
|
<p>
|
2010-07-19 12:44:16 +00:00
|
|
|
2010-07-18
|
2005-10-10 12:40:55 +00:00
|
|
|
|
2008-06-08 15:52:38 +00:00
|
|
|
<em>Notice: I often participate in various (inter)national ICT
|
|
|
|
conferences in Serbia and abroad, presenting technical papers and
|
|
|
|
delivering half-day and full-day tutorials, covering basic ideas
|
|
|
|
and useful mission of the amateur radio hobby and its possible
|
|
|
|
usage in engineering education. What I have been doing is to spread
|
|
|
|
- as much as possible - the knowledge about existing open source
|
|
|
|
products, including Linux and amateur radio free software. Besides
|
|
|
|
that, I have been writing various articles for a variety of scientific
|
|
|
|
and other magazines. Here you have the list of those articles and
|
|
|
|
paper topics submitted to the conferences.</em>
|
2003-09-05 15:26:58 +00:00
|
|
|
|
|
|
|
<p>
|
2004-01-11 16:08:22 +00:00
|
|
|
In case you want to re-publish or forward my volunteer paper
|
2006-07-28 13:56:19 +00:00
|
|
|
works to some journals or other public media around, you are
|
2003-09-05 15:26:58 +00:00
|
|
|
free to contact me. Some of my papers are written in Serbian
|
2004-01-11 16:08:22 +00:00
|
|
|
Cyrillic, some of them are in English and some of them even
|
2003-09-05 15:26:58 +00:00
|
|
|
combined!
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<tscreen><verb>
|
|
|
|
- "U prilog I.A.C.", MI (the youth scientists' organization
|
|
|
|
newspaper), No. 69, 1990.
|
|
|
|
|
|
|
|
- "U prilog I.A.C. (2)", MI (the youth scientists' organization
|
|
|
|
newspaper), No. 70, 1990.
|
|
|
|
|
|
|
|
- "Vise od radio-amaterskog hobija", Vojska, No. 163, 1995.
|
|
|
|
|
|
|
|
- "Korak ka zvezdama", Vojska, No. 200, 1996.
|
|
|
|
|
|
|
|
- "Die Gefahr von Innen - Internet gegen Amateurfunk",
|
|
|
|
AMSAT-DL Journal, No. 4, Dez./Feb. 96/97.
|
|
|
|
|
|
|
|
- "Kakva nam organizacija (ne) treba?", Radioamater,
|
|
|
|
Feb. 1997.
|
|
|
|
|
|
|
|
- "Kakva nam organizacija (ne) treba? (2)", Radioamater,
|
|
|
|
Apr./May. 1997.
|
|
|
|
|
|
|
|
- "Sateliti umiru padajuci", Vojska, No. 235, 1997.
|
|
|
|
|
|
|
|
- "The Internet is not the Enemy", QST, Aug. 1998.
|
|
|
|
|
|
|
|
- "Novi radio-amateri za novi vek", Antena, June 2000.
|
|
|
|
|
|
|
|
- "Racunarske komunikacije putem radio-veza i
|
|
|
|
zastita pristupa", Bezbednost, No. 3, 2000.
|
|
|
|
|
|
|
|
- "Paket-radio - Racunarske komunikacije putem radio-veza",
|
|
|
|
proceedings, "Info-Teh", Vrnjacka Banja, Serbia, 2001.
|
|
|
|
|
|
|
|
- "Racunarske komunikacije putem radio-amaterskih veza",
|
|
|
|
proceedings, "YU-Info", Kopaonik, Serbia, 2002.
|
|
|
|
|
|
|
|
- "Computer Communications over radio", presentation,
|
|
|
|
"Linux FEST", Belgrade, Serbia, 2002.
|
|
|
|
|
|
|
|
- "Paket-radio - Radio-amaterske digitalne veze",
|
|
|
|
proceedings, "Kongres JISA", Herceg Novi, Montenegro, 2002.
|
|
|
|
|
|
|
|
- "Paket-radio (2) - Modemi za radio-veze",
|
|
|
|
proceedings, "Info-Teh", Vrnjacka Banja, Serbia, 2002.
|
|
|
|
|
|
|
|
- "Alternativne racunarske mreze", festival catalog,
|
|
|
|
"INFOFEST", Budva, Montenegro, 2002.
|
|
|
|
|
|
|
|
- "Alternative computer networks", proceedings, "TELFOR",
|
|
|
|
Belgrade, Serbia, 2002.
|
|
|
|
|
|
|
|
- "With rule and regulation improvements to the progress"
|
|
|
|
proceedings, "TELFOR", Belgrade, Serbia, 2002.
|
|
|
|
|
2003-10-07 16:14:37 +00:00
|
|
|
- "Racunarske komunikacije putem radio-amaterskih veza (2)",
|
|
|
|
proceedings, "YU-Info", Kopaonik, Serbia, 2003.
|
|
|
|
|
|
|
|
- "Racunarske komunikacije putem radio-amaterskih veza (3)",
|
|
|
|
proceedings, "YU-Info", Kopaonik, Serbia, 2003.
|
|
|
|
|
2003-09-05 15:26:58 +00:00
|
|
|
- "Paket-radio (3) - Programske mogucnosti na strani servera",
|
|
|
|
proceedings, "Info-Teh", Vrnjacka Banja, Serbia, 2003.
|
|
|
|
|
|
|
|
- "Paket-radio (4) - Legal rules and regulations in the amateur
|
|
|
|
computer networks", proceedings, "Info-Teh", Vrnjacka Banja,
|
|
|
|
Serbia, 2003.
|
|
|
|
|
|
|
|
- "Packet-radio (2) - With rule and regulation improvements to the progress",
|
|
|
|
proceedings, "Kongres JISA", Herceg Novi, Montenegro, 2003.
|
2003-10-07 16:14:37 +00:00
|
|
|
|
|
|
|
- "Alternativne racunarske mreze (2)", festival catalog,
|
|
|
|
"INFOFEST", Budva, Montenegro, 2003.
|
|
|
|
|
|
|
|
- "Alternativne racunarske komunikacije putem radio-veza",
|
|
|
|
Info M, 6-7/2003.
|
2003-11-03 16:06:28 +00:00
|
|
|
|
|
|
|
- "Legal Rules and Regulations in the Amateur Radio Computer Networks",
|
2005-10-10 12:40:55 +00:00
|
|
|
proceedings, "22nd ARRL and TAPR Digital Communications Conference",
|
2003-11-03 16:06:28 +00:00
|
|
|
Hartford, CT USA, 2003.
|
2003-11-09 16:41:05 +00:00
|
|
|
|
|
|
|
- "Favoritism", IEEE Potentials, Oct/Nov 2003
|
2003-12-08 13:36:02 +00:00
|
|
|
|
|
|
|
- "Alternative computer networks (2)", proceedings, "TELFOR",
|
|
|
|
Belgrade, Serbia, 2003.
|
|
|
|
|
|
|
|
- "With rule and regulation improvements to the progress (2)"
|
|
|
|
proceedings, "TELFOR", Belgrade, Serbia, 2003.
|
2004-01-11 16:08:22 +00:00
|
|
|
|
|
|
|
- "XI Telekomunikacioni forum - TELFOR 2003", Info M, 8/2003.
|
|
|
|
|
|
|
|
- "Aktivnosti organizacije IEEE Computer Society - YU Chapter"
|
|
|
|
Info M, 8/2003.
|
2004-03-30 00:30:33 +00:00
|
|
|
|
|
|
|
- "Yugoslavia IEEE Student Branch", IEEE Region 8 News,
|
|
|
|
Vol. 7 No. 1, Feb/Mar 2004
|
2004-06-22 13:47:26 +00:00
|
|
|
|
|
|
|
- "Radio-amaterske racunarske mreze", tutorial, "Info-Teh",
|
|
|
|
Vrnjacka Banja, Serbia, 2004.
|
|
|
|
|
|
|
|
- "Radio-amaterske racunarske mreze", tutorial, "Kongres
|
|
|
|
JISA", Herceg Novi, Montenegro, 2004.
|
2004-10-05 23:26:39 +00:00
|
|
|
|
|
|
|
- "The Amateur Radio as a Learning Technology in
|
2008-09-06 16:14:35 +00:00
|
|
|
Developing Countries", proceedings, "ICALT/TEDC 2004",
|
2004-10-05 23:26:39 +00:00
|
|
|
Joensuu, Finland, 2004.
|
|
|
|
|
|
|
|
- "The Amateur Radio in Engineering Education", seminar,
|
|
|
|
"IEEE-EESTEC Technical Conference 2004", Arcavacata
|
|
|
|
di Rende (Cosenza), Italy, 2004.
|
2005-03-26 21:48:05 +00:00
|
|
|
|
|
|
|
- "The Conference Low-Down", IEEE Potentials, Feb/Mar 2005
|
|
|
|
|
|
|
|
- "ICALT 2004, IEEE Novi Sad SB, Serbia & Montenegro",
|
|
|
|
IEEE Region 8 News, Vol. 8 No. 1, Mar 2005
|
2005-06-20 12:35:00 +00:00
|
|
|
|
|
|
|
- "The Conference Low-Down", IEEE Potentials, Apr/May 2005
|
|
|
|
|
|
|
|
- "The Amateur Radio Networking And Computing", proceedings,
|
|
|
|
"PSU-UNS ICEE 2005", Novi Sad, Serbia, 2005
|
|
|
|
|
|
|
|
- "Radio-amaterske racunarske mreze", tutorial, "Info-Teh",
|
|
|
|
Vrnjacka Banja, Serbia, 2005 (intro: dr D. Surla, PMF)
|
|
|
|
|
|
|
|
- "Radio-veze", round table session, "Kongres JISA", Herceg
|
|
|
|
Novi, Montenegro, 2005.
|
2005-07-21 23:41:21 +00:00
|
|
|
|
|
|
|
- "The New Amateur Radio University Network - AMUNET",
|
|
|
|
proceedings, "9th WSEAS CSCC Multiconference",
|
|
|
|
Vouliagmeni, Athens, Greece, 2005.
|
|
|
|
|
|
|
|
- "The perspectives of the Amateur University Network -
|
|
|
|
AMUNET", WSEAS Transactions on Communications, Vol 4,
|
|
|
|
pp 834, Sep. 2005.
|
2005-10-10 12:40:55 +00:00
|
|
|
|
|
|
|
- "Conferences in Serbia and Montenegro", IEEE Region 8 News,
|
2006-07-28 13:56:19 +00:00
|
|
|
Vol. 8 No. 3, Sep 2005.
|
|
|
|
|
|
|
|
- "The Conference Low-Down", IEEE Potentials, Dec 2005
|
|
|
|
|
2007-04-11 13:35:13 +00:00
|
|
|
- "Divided We Fall", The Institute, IEEE, Dec 2005
|
|
|
|
|
2006-07-28 13:56:19 +00:00
|
|
|
- "University Networking Through the Amateur Radio Communications",
|
|
|
|
plenary lecture, "3rd WSEAS/IASME Int. Conf. on Engineering
|
|
|
|
Education", Vouliagmeni, Athens, Greece, 2006.
|
|
|
|
|
|
|
|
- "The New Amateur Radio University Network - AMUNET (Part 2)",
|
|
|
|
proceedings, "10th WSEAS CSCC Multiconference",
|
|
|
|
Vouliagmeni, Athens, Greece, 2006.
|
|
|
|
|
|
|
|
- "University Networking Through the Amateur Radio Communications",
|
|
|
|
tutorial, "10th WSEAS CSCC Multiconference",
|
|
|
|
Vouliagmeni, Athens, Greece, 2006.
|
2007-04-11 13:35:13 +00:00
|
|
|
|
|
|
|
- "Education in Peril", The Institute, IEEE, Sep 2006
|
|
|
|
|
|
|
|
- "The Conference Low-Down", IEEE Potentials, Dec 2006
|
2007-09-30 13:59:17 +00:00
|
|
|
|
|
|
|
- "Amateur Radio in Engineering Education", tutorial, "Info-Teh",
|
|
|
|
Vrnjacka Banja, Serbia, 2007.
|
|
|
|
|
|
|
|
- "Paket-radio (5) - Programske mogucnosti na strani klijenta",
|
|
|
|
proceedings, "Info-Teh", Vrnjacka Banja, Serbia, 2007.
|
|
|
|
|
2008-09-06 16:14:35 +00:00
|
|
|
- "Summer Schools on the Amateur Radio Computing", proceedings,
|
|
|
|
"12th Annual Conference on Innovation & Technology in Computer
|
|
|
|
Science Education", ACM ITiCSE 2007, Dundee, Scotland, 2007.
|
|
|
|
|
2007-09-30 13:59:17 +00:00
|
|
|
- "Amateur Radio in Engineering Education", tutorial, "EUROCON",
|
|
|
|
Warsaw, Poland, 2007.
|
2007-11-19 14:00:19 +00:00
|
|
|
|
|
|
|
- "Bringing New Life in Old Computers", proceedings, "26th ARRL
|
|
|
|
and TAPR Digital Communications Conference", Hartford, CT USA,
|
|
|
|
2007.
|
|
|
|
|
|
|
|
- "The Conference Low-Down", IEEE Potentials, Sep/Oct 2007
|
2008-01-14 00:01:41 +00:00
|
|
|
|
|
|
|
- "My trip to Eurocon - a member's view", IEEE Region 8 News,
|
2008-06-08 15:52:38 +00:00
|
|
|
Vol. 10 No. 3, Dec 2007.
|
|
|
|
|
|
|
|
- "Amateur Radio in Engineering Education", tutorial, "Info-Teh",
|
|
|
|
Vrnjacka Banja, Serbia, 2008.
|
|
|
|
|
|
|
|
- "Paket-radio (6) - Privatnost podataka i zastita ucesnika u
|
|
|
|
radio-amaterskim mrezama", proceedings, "Info-Teh", Vrnjacka
|
|
|
|
Banja, Serbia, 2008.
|
2008-08-03 21:14:04 +00:00
|
|
|
|
|
|
|
- "Amateur Radio in Engineering Education",
|
|
|
|
tutorial, "5th WSEAS/IASME Int. Conf. on Engineering
|
|
|
|
Education", Heraklion, Crete, Greece, 2008.
|
|
|
|
|
|
|
|
- "The New Amateur Radio University Network - AMUNET (Part 3)",
|
|
|
|
proceedings, "12th WSEAS CSCC Multiconference",
|
|
|
|
Heraklion, Crete, Greece, 2008.
|
|
|
|
|
|
|
|
- "Amateur Radio Telecommunications and Networking in Education",
|
|
|
|
tutorial, "IARIA ICWMC 2008", Vouliagmeni, Athens, Greece, 2008.
|
2008-12-14 16:40:58 +00:00
|
|
|
|
|
|
|
- "The Conference Low-Down", IEEE Potentials, Sep/Oct 2008
|
|
|
|
|
|
|
|
- "Amateur Radio in Engineering Education", workshop,
|
|
|
|
"TELFOR", Belgrade, Serbia, 2008.
|
2009-04-20 13:32:46 +00:00
|
|
|
|
|
|
|
- "Amateur Radio: More than a hobby!", tutorial,
|
|
|
|
"IAENG IMECS 2009", Hong Kong, China, 2009.
|
2009-08-05 19:19:41 +00:00
|
|
|
|
|
|
|
- "Wasted Gear", IEEE Computer, Feb 2009
|
|
|
|
|
|
|
|
- "Amateur Radio: More than a hobby!", tutorial,
|
|
|
|
"6th WSEAS/IASME Int. Conf. on Engineering Education",
|
|
|
|
Rodos, Greece, 2009.
|
|
|
|
|
|
|
|
- "The New Amateur Radio University Network - AMUNET (Part 4)",
|
|
|
|
proceedings, "13th WSEAS CSCC Multiconference",
|
|
|
|
Rodos, Greece, 2009.
|
2009-11-08 15:15:31 +00:00
|
|
|
|
|
|
|
- "Amateur Radio in Education", book chapter in "Handbook of
|
|
|
|
Research on Human Performance and Instructional Technology",
|
|
|
|
ISBN: 978-1-60566-782-9, October 2009
|
2010-07-19 12:44:16 +00:00
|
|
|
|
|
|
|
- "Surveillance as a service", IEEE Computer, Dec 2009
|
|
|
|
|
|
|
|
- "Amateur Radio: More than a hobby!", tutorial, IEEE
|
|
|
|
"ICACT 2010", Phoenix Park, Korea, 2010.
|
|
|
|
|
|
|
|
- "Amateur Radio: More than a hobby!", tutorial, DIRF
|
|
|
|
"NDT 2010", Prague, Czech Republic, 2010.
|
2005-03-26 21:48:05 +00:00
|
|
|
</verb></tscreen>
|
2003-09-05 15:26:58 +00:00
|
|
|
|
2003-11-03 16:06:28 +00:00
|
|
|
<p>
|
2010-07-19 12:44:16 +00:00
|
|
|
Besides the published articles and presented works, I am also a member
|
|
|
|
of the following associations: IEEE Computer Society, IEEE Communications
|
|
|
|
Society, WSEAS and ACM. In addition, I work on establishing an academic
|
|
|
|
computer network that would use the amateur radio stations as the media.
|
|
|
|
Some kinds of proposed networks exist elsewhere on this planet and I
|
|
|
|
invite their administrators to contact me in order to cooperate.
|
2003-11-03 16:06:28 +00:00
|
|
|
|
2003-09-05 15:26:58 +00:00
|
|
|
|
|
|
|
<sect>Further Information
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<sect1>Copyright
|
|
|
|
<p>
|
2010-07-19 12:44:16 +00:00
|
|
|
Copyright (c) 2000-2010 by Miroslav "Misko" Skoric, YT7MPB.
|
2003-09-05 15:26:58 +00:00
|
|
|
<p>
|
|
|
|
Permission is granted to copy, distribute and/or modify this document
|
|
|
|
under the terms of the GNU Free Documentation License, Version 1.1 or
|
|
|
|
any later version published by the Free Software Foundation; with no
|
|
|
|
Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
|
|
|
|
Texts. A copy of the license is available from
|
2016-01-17 21:25:16 +00:00
|
|
|
<url url="http://www.fsf.org/licenses/fdl.html">.
|
2003-09-05 15:26:58 +00:00
|
|
|
|
|
|
|
<sect1>Disclaimer
|
|
|
|
<p>
|
|
|
|
|
|
|
|
Use the information in this document at your own
|
|
|
|
risk. I disavow any potential liability of this
|
|
|
|
document. Use of the concepts, examples, and/or
|
|
|
|
other content of this document is entirely at
|
|
|
|
your own risk.
|
|
|
|
|
|
|
|
All copyrights are owned by their owners, unless
|
|
|
|
specifically noted otherwise. Use of a term in
|
|
|
|
this document should not be regarded as
|
|
|
|
affecting the validity of any trademark or service
|
|
|
|
mark.
|
|
|
|
|
|
|
|
Naming of particular products or brands should not
|
|
|
|
be seen as endorsements.
|
|
|
|
|
|
|
|
You are strongly recommended to take a backup of
|
|
|
|
your system before major installation and backups
|
|
|
|
at regular intervals.
|
|
|
|
|
|
|
|
<sect1>News
|
|
|
|
|
|
|
|
<p>
|
|
|
|
In addition to the Lilo docs, there are a number
|
|
|
|
of mini-howto's that can be useful for your needs.
|
2004-01-11 16:08:22 +00:00
|
|
|
All of them are called ``Linux+<em/foobar-OS/'', for
|
|
|
|
some <em/foobar-OS/, they deal with coexistence of
|
|
|
|
Linux and other operating system(s). For example,
|
2003-09-05 15:26:58 +00:00
|
|
|
"NT OS Loader + Linux mini-HOWTO" by Bernd Reichert,
|
|
|
|
describes how to add an entry for Linux under existing
|
2003-12-08 13:36:02 +00:00
|
|
|
Windows NT Loader's menu. Next, you have
|
|
|
|
<url url="http://tldp.org/HOWTO/Linux+WinNT.html"
|
2005-03-26 21:48:05 +00:00
|
|
|
name="Linux+WindowsNT"> mini-HOWTO written by myself,
|
2003-12-08 13:36:02 +00:00
|
|
|
covering how to add an entry for NT
|
2003-09-05 15:26:58 +00:00
|
|
|
under existing Linux Lilo menu (more detailed than here).
|
|
|
|
Also, "Multiboot-with-LILO" describes how the various
|
2004-01-11 16:08:22 +00:00
|
|
|
Windows flavors can be made to coexist with Linux.
|
2003-09-05 15:26:58 +00:00
|
|
|
|
|
|
|
<em>This mini-HOWTO would be improved from time
|
|
|
|
to time. If you think that the HOWTO on your
|
|
|
|
Linux installation CD is some out-of-date, you
|
|
|
|
may check for newest release on the Internet. It
|
2008-12-14 16:40:58 +00:00
|
|
|
could be found within the main <url
|
2003-09-05 15:26:58 +00:00
|
|
|
url="http://www.tldp.org/"
|
2008-12-14 16:40:58 +00:00
|
|
|
name="Linux Documentation Project"> or some of its
|
|
|
|
mirrors.
|
|
|
|
</em>
|
2003-09-05 15:26:58 +00:00
|
|
|
|
|
|
|
<sect1>Credits
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<em>This version of mini-HOWTO can thanks to:</em>
|
|
|
|
|
|
|
|
<tscreen><verb>
|
|
|
|
Cameron Spitzer (cls@truffula.sj.ca.us)
|
|
|
|
Alessandro Rubini (rubini@linux.it)
|
|
|
|
Tony Harris (tony@nmr.mgh.harvard.edu)
|
|
|
|
Marc Tanguy (mtanguy@ens.uvsq.fr)
|
2004-01-11 16:08:22 +00:00
|
|
|
Dragomir Kalaba, a local Linux 'guru'
|
2003-09-05 15:26:58 +00:00
|
|
|
</verb></tscreen>
|
|
|
|
|
|
|
|
Any comments or suggestions can be mailed to my
|
|
|
|
email address:
|
2010-07-19 12:44:16 +00:00
|
|
|
skoric at eunet dot rs
|
2003-09-05 15:26:58 +00:00
|
|
|
|
|
|
|
<sect1>HOWTO
|
|
|
|
<p>
|
|
|
|
<nidx>disk!information resources!HOWTOs</nidx>
|
|
|
|
These are intended as the primary starting points to
|
|
|
|
get the background information as well as show you how to solve
|
|
|
|
a specific problem.
|
|
|
|
Some relevant HOWTOs are <tt/Bootdisk/, <tt/Installation/, <tt/SCSI/ and <tt/UMSDOS/.
|
|
|
|
The main site for these is the
|
|
|
|
<url url="http://metalab.unc.edu/LDP/"
|
|
|
|
name="LDP archive">
|
|
|
|
at Metalab (formerly known as Sunsite).
|
|
|
|
|
|
|
|
<sect1>Mini-HOWTO
|
|
|
|
<p>
|
|
|
|
<nidx>disk!information resources!mini-HOWTOs</nidx>
|
|
|
|
These are the smaller free text relatives to the HOWTOs.
|
|
|
|
Some relevant mini-HOWTOs are
|
|
|
|
<tt/Backup-With-MSDOS/, <tt/Diskless/, <tt/LILO/, <tt/Large Disk/,
|
|
|
|
<tt/Linux+DOS+Win95+OS2/, <tt/Linux+OS2+DOS/, <tt/Linux+Win95/,
|
|
|
|
<tt/Linux+WindowsNT/, <tt/Linux+NT-Loader/, <tt/NFS-Root/,
|
|
|
|
<tt/Win95+Win+Linux/, <tt/ZIP Drive/, <tt/FBB packet-radio BBS/.
|
|
|
|
You can find these at the same place as the HOWTOs, usually in a sub directory
|
|
|
|
called <tt/mini/. Note that these are scheduled to be converted into SGML and
|
|
|
|
become proper HOWTOs in the near future.
|
|
|
|
|
|
|
|
<sect1>Local Resources
|
|
|
|
<p>
|
|
|
|
<nidx>disk!information resources!local</nidx>
|
|
|
|
In most distributions of Linux there is a document directory installed,
|
|
|
|
have a look in the
|
|
|
|
<htmlurl url="file:///usr/doc"
|
|
|
|
name="/usr/doc"> directory.
|
|
|
|
where most packages store their main documentation and README files etc.
|
|
|
|
Also you will here find the HOWTO archive (
|
|
|
|
<htmlurl url="file:///usr/doc/HOWTO"
|
|
|
|
name="/usr/doc/HOWTO">)
|
|
|
|
of ready formatted HOWTOs
|
|
|
|
and also the mini-HOWTO archive (
|
|
|
|
<url url="file:///usr/doc/HOWTO/mini"
|
|
|
|
name="/usr/doc/HOWTO/mini">)
|
|
|
|
of plain text documents.
|
|
|
|
|
|
|
|
Many of the configuration files mentioned earlier can be found in the
|
|
|
|
<htmlurl url="file:///etc"
|
|
|
|
name="/etc">
|
|
|
|
directory. In particular you will want to work with the
|
|
|
|
<htmlurl url="file:///etc/fstab"
|
|
|
|
name="/etc/fstab">
|
|
|
|
file that sets up the mounting of partitions
|
|
|
|
and possibly also
|
|
|
|
<htmlurl url="file:///etc/mdtab"
|
|
|
|
name="/etc/mdtab">
|
|
|
|
file that is used for the <tt/md/ system to set up RAID.
|
|
|
|
|
|
|
|
The kernel source in
|
|
|
|
<url url="file:///usr/src/linux"
|
|
|
|
name="/usr/src/linux">
|
|
|
|
is, of course, the ultimate documentation. In other
|
|
|
|
words, <em>use the source, Luke</em>.
|
|
|
|
It should also be pointed out that the kernel comes not only with
|
|
|
|
source code which is even commented (well, partially at least)
|
|
|
|
but also an informative
|
|
|
|
<url url="file:///usr/src/linux/Documentation"
|
|
|
|
name="documentation directory">.
|
|
|
|
If you are about to ask any questions about the kernel you should
|
|
|
|
read this first, it will save you and many others a lot of time
|
|
|
|
and possibly embarrassment.
|
|
|
|
|
|
|
|
Also have a look in your system log file (
|
|
|
|
<htmlurl url="file:///var/log/messages"
|
|
|
|
name="/var/log/messages">)
|
|
|
|
to see what is going on and in particular how the booting went if
|
|
|
|
too much scrolled off your screen. Using <tt>tail -f /var/log/messages</tt>
|
|
|
|
in a separate window or screen will give you a continuous update of what is
|
|
|
|
going on in your system.
|
|
|
|
|
|
|
|
You can also take advantage of the
|
|
|
|
<htmlurl url="file:///proc"
|
|
|
|
name="/proc">
|
|
|
|
file system that is a window into the inner workings of your system.
|
|
|
|
Use <tt/cat/ rather than <tt/more/ to view the files as they are
|
|
|
|
reported as being zero length. Reports are that <tt/less/ works well here.
|
|
|
|
|
|
|
|
<sect1>Web Pages
|
|
|
|
<p>
|
|
|
|
<nidx>disk!information resources!WWW</nidx>
|
|
|
|
<nidx>disk!information resources!web pages</nidx>
|
|
|
|
There is a huge number of informative web pages out there and by their very
|
|
|
|
nature they change quickly so don't be too surprised if these links become
|
|
|
|
quickly outdated.
|
|
|
|
|
|
|
|
A good starting point is of course the
|
2003-12-08 13:36:02 +00:00
|
|
|
<url url="http://www.linuxdoc.org/" name="Linux Documentation Project">
|
|
|
|
home page, or this one: <url url="http://www.tldp.org/" name="Linux
|
|
|
|
Documentation Project">, an information central for documentation, project
|
|
|
|
pages and much, much more.
|
2003-09-05 15:26:58 +00:00
|
|
|
|
|
|
|
Please let me know if you have any other leads that can be of interest.
|
|
|
|
|
|
|
|
|
|
|
|
<sect>Getting help
|
|
|
|
|
|
|
|
<p>
|
|
|
|
<nidx>(your index root)!assistance, obtaining</nidx>
|
|
|
|
|
|
|
|
In the end you might find yourself unable to solve your problems and need
|
|
|
|
help from someone else. The most efficient way is either to ask someone
|
|
|
|
local or in your nearest Linux user group, search the web for the nearest
|
|
|
|
one.
|
|
|
|
|
|
|
|
Another possibility is to ask on Usenet News in one of the many, many
|
|
|
|
newsgroups available. The problem is that these have such a high
|
|
|
|
volume and noise (called low signal-to-noise ratio) that your question
|
|
|
|
can easily fall through unanswered.
|
|
|
|
|
|
|
|
No matter where you ask it is important to ask well or you will not be
|
|
|
|
taken seriously. Saying just <it/my disk does not work/ is not going
|
|
|
|
to help you and instead the noise level is increased even further and if
|
|
|
|
you are lucky someone will ask you to clarify.
|
|
|
|
|
|
|
|
Instead describe your problems in some detail that
|
|
|
|
will enable people to help you. The problem could lie somewhere you did
|
|
|
|
not expect. Therefore you are advised to list up the following information
|
|
|
|
on your system:
|
|
|
|
|
|
|
|
<descrip>
|
|
|
|
<tag/Hardware/
|
|
|
|
<itemize>
|
|
|
|
<item>Processor
|
|
|
|
<item>DMA
|
|
|
|
<item>IRQ
|
|
|
|
<item>Chip set (LX, BX etc)
|
|
|
|
<item>Bus (ISA, VESA, PCI etc)
|
|
|
|
<item>Expansion cards used (Disk controllers, video, IO etc)
|
|
|
|
</itemize>
|
|
|
|
|
|
|
|
<tag/Software/
|
|
|
|
<itemize>
|
|
|
|
<item>BIOS (On motherboard and possibly SCSI host adapters)
|
|
|
|
<item>LILO, if used
|
|
|
|
<item>Linux kernel version as well as possible modifications and patches
|
|
|
|
<item>Kernel parameters, if any
|
|
|
|
<item>Software that shows the error (with version number or date)
|
|
|
|
</itemize>
|
|
|
|
|
|
|
|
<tag/Peripherals/
|
|
|
|
<itemize>
|
|
|
|
<item>Type of disk drives with manufacturer name, version and type
|
|
|
|
<item>Other relevant peripherals connected to the same busses
|
|
|
|
</itemize>
|
|
|
|
|
|
|
|
</descrip>
|
|
|
|
|
|
|
|
Remember that booting text is logged to <tt>/var/log/messages</tt> which can
|
|
|
|
answer most of the questions above. Obviously if the drives fail you might not
|
|
|
|
be able to get the log saved to disk but you can at least scroll back up the
|
|
|
|
screen using the <tt/SHIFT/ and <tt/PAGE UP/ keys. It may also be useful to
|
|
|
|
include part of this in your request for help but do not go overboard, keep
|
|
|
|
it <em/brief/ as a complete log file dumped to Usenet News is more than a
|
|
|
|
little annoying.
|
|
|
|
|
|
|
|
</article>
|
2004-08-09 13:34:25 +00:00
|
|
|
|
2009-08-05 19:19:41 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|