Michael Kerrisk
6e00b7a858
iconv.1, ldd.1, accept.2, access.2, add_key.2, arch_prctl.2, bpf.2, chmod.2, chown.2, close_range.2, copy_file_range.2, execve.2, execveat.2, fanotify_mark.2, futex.2, futimesat.2, getpriority.2, intro.2, ioctl_tty.2, keyctl.2, link.2, membarrier.2, mkdir.2, mknod.2, mlock.2, mount.2, mount_setattr.2, open.2, open_by_handle_at.2, perf_event_open.2, pidfd_open.2, readlink.2, readv.2, rename.2, request_key.2, seccomp.2, sigaction.2, stat.2, statx.2, symlink.2, syscalls.2, umount.2, unlink.2, utimensat.2, wait.2, bsearch.3, fflush.3, getaddrinfo.3, getauxval.3, getopt.3, getsubopt.3, mkfifo.3, pthread_mutex_consistent.3, pthread_setname_np.3, pthread_tryjoin_np.3, scandir.3, sem_wait.3, stailq.3, strlen.3, strstr.3, termios.3, tsearch.3, wcslen.3, wcstok.3, wordexp.3, proc.5, capabilities.7, cgroups.7, fanotify.7, mount_namespaces.7, namespaces.7, path_resolution.7, pipe.7, posixoptions.7, user_namespaces.7, vdso.7, iconvconfig.8, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-08-27 02:44:07 +02:00
Alejandro Colomar
fb74563941
getaddrinfo.3: Note that 'errno' is set in parallel with EAI_SYSTEM
...
The previous wording wasn't very explicit, leaving room for
believing that 'errno' may be 0 after returning EAI_SYSTEM.
Use a wording similar to other pages, for added consistency.
[mtk: edited commit message title; also, POSIX notes that
'errno' is set in this case.]
Reported-by: Cristian Morales Vega <christian.morales.vega@gmail.com>
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-08-27 01:17:59 +02:00
Michael Kerrisk
1d767b552e
getent.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, mtrace.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, add_key.2, adjtimex.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, bpf.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, close_range.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fanotify_init.2, fanotify_mark.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_rm_watch.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_console.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_fslabel.2, ioctl_getfsmap.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, open_by_handle_at.2, openat2.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pidfd_getfd.2, pidfd_open.2, pidfd_send_signal.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, restart_syscall.2, rmdir.2, rt_sigqueueinfo.2, s390_guarded_storage.2, s390_pci_mmio_write.2, s390_runtime_instr.2, s390_sthyi.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, stime.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscall.2, syscalls.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, circleq.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, fileno.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fopencookie.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getutmp.3, getw.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, list.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setsigmask_np.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_mutex_consistent.3, pthread_mutexattr_getpshared.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, readdir_r.3, realpath.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, slist.3, sockatmark.3, sqrt.3, stailq.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tailq.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console_codes.4, dsp56k.4, hpsa.4, initrd.4, loop.4, lp.4, msr.4, random.4, rtc.4, smartpqi.4, veth.4, wavelan.4, acct.5, core.5, elf.5, hosts.5, locale.5, proc.5, resolv.conf.5, rpc.5, slabinfo.5, sysfs.5, tmpfs.5, utmp.5, address_families.7, aio.7, attributes.7, bootparam.7, capabilities.7, cgroups.7, complex.7, ddp.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, hier.7, inode.7, inotify.7, ip.7, ipv6.7, keyrings.7, locale.7, man-pages.7, man.7, math_error.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, numa.7, packet.7, pkeys.7, pthreads.7, queue.7, raw.7, rtnetlink.7, sched.7, session-keyring.7, shm_overview.7, sigevent.7, signal-safety.7, signal.7, sock_diag.7, socket.7, spufs.7, symlink.7, system_data_types.7, tcp.7, time_namespaces.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, user_namespaces.7, vdso.7, vsock.7, x25.7, iconvconfig.8, ld.so.8, ldconfig.8, sln.8, tzselect.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-03-22 00:15:34 +01:00
Alejandro Colomar
854214715b
getaddrinfo.3: SYNOPSIS: Use 'restrict' in prototypes
...
Both POSIX and glibc use 'restrict' in getaddrinfo().
Let's use it here too.
.../glibc$ grep_glibc_prototype getaddrinfo;
resolv/netdb.h:660:
extern int getaddrinfo (const char *__restrict __name,
const char *__restrict __service,
const struct addrinfo *__restrict __req,
struct addrinfo **__restrict __pai);
.../glibc$
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-03-03 23:24:23 +01:00
Michael Kerrisk
c466875ecd
Various pages: Improve formatting in ATTRIBUTES
...
Make the formatting more consistent inside the tables in the
ATTRIBUTES sections. Make the source code more uniform; in
particular, eliminate the use of custom tweaks using
'lbwNN'/'lwNN' and .br macros. In addition, ensure that
hyphenation and text justification do not occur inside the tables.
This is a script-driven edit:
[[
PAGE_LIST=$(git grep -l 'SH ATTRIBUTES' man[23])
# Strip out any preexisting .sp/.br/.ad macros
sed -i '/SH ATTR/,/^\.SH/{/^\.sp/d; /^\.br/d; /\.ad/d}' $PAGE_LIST
# Eliminate any use of 'wNN' in tables; default first column
# to fill unused space
sed -i '/SH ATTR/,/^\.SH/s/lbw[0-9]*/lb/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/lw[0-9]*/l/g' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/s/^lb /lbx /' $PAGE_LIST
# Nest the tables inside ".ad l"+".nh" and ".hy"+".ad"+".sp 1"
# ".ad l" ==> no right justification of text in table cells
# ".nh" ==> No hyphenation in table cells
# ".sp 1" ==> ensure a blank line before the next section heading
sed -i '/SH ATTR/,/^\.SH/{/\.TS/i.ad l\n.nh
}' $PAGE_LIST
sed -i '/SH ATTR/,/^\.SH/{/\.TE/a.hy\n.ad\n.sp 1
}' $PAGE_LIST
# In a few of the tables, the third column has a lot of text, so
# make that column wide (rather than the first column)
sed -i '/^lbx/{s/lbx/lb/;s/lb$/lbx/}' \
man3/bindresvport.3 \
man3/fmtmsg.3 man3/gethostbyname.3 man3/getlogin.3 \
man3/getnetent.3 man3/getprotoent.3 man3/getpwent.3 \
man3/getservent.3 man3/getspnam.3 man3/getutent.3 man3/glob.3 \
man3/login.3 \
man3/setnetgrent.3 \
man3/wordexp.3
]]
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-06 13:46:39 +01:00
Michael Kerrisk
9d2adbae20
Various pages: Simplify mark-up for Feature Test Macro requirements
...
Different source styles are used in different pages to achieve the
same formatted output, and in some cases the source mark-up is a
rather convoluted combination of .RS/.RE/.TP/.PD macros. Simplify
this greatly, and unify all of the pages to use more or less the
same source code style. This makes the source code rather easier
to read, and may simplify future scripted global changes.
The feature test macro info is currently bracketed by .nf/.fi
pairs. This is not strictly necessary (i.e., it makes no
difference to the rendered output), but for the moment we keep
these "brackets" in case they may be replaced with something else.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-05 11:01:01 +01:00
Michael Kerrisk
e36f10f91d
Various pages: replace '.ad b' macro with '.ad'
...
Verified no change in rendered output
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-04 16:25:50 +01:00
Michael Kerrisk
51a6f93d71
wait.2, getaddrinfo.3, getnameinfo.3: ffix: Bring greater consistency to FTM layout
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-04 10:10:05 +01:00
Michael Kerrisk
c6beb8a167
bind.2, clone.2, dup.2, futex.2, mprotect.2, open_by_handle_at.2, pivot_root.2, select_tut.2, shmop.2, timer_create.2, userfaultfd.2, getaddrinfo.3, getaddrinfo_a.3, inet_net_pton.3, malloc_info.3, mbstowcs.3, newlocale.3, posix_spawn.3, pthread_sigmask.3, shm_open.3, strtol.3, inotify.7, user_namespaces.7: Add periods at end of sentences in comments
...
Try to bring a little more consistency on the use of periods
in comments in example code.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-12-27 12:32:44 +01:00
Michael Kerrisk
3fde8c2e45
memusage.1, pldd.1, sprof.1, add_key.2, bind.2, bpf.2, clone.2, dup.2, epoll_ctl.2, eventfd.2, fanotify_init.2, fanotify_mark.2, futex.2, getdents.2, getpid.2, getrlimit.2, intro.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, keyctl.2, membarrier.2, memfd_create.2, mprotect.2, msgctl.2, msgop.2, nfsservctl.2, open.2, open_by_handle_at.2, openat2.2, outb.2, perf_event_open.2, pivot_root.2, recv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, sched_setattr.2, seccomp.2, select.2, send.2, signalfd.2, spu_run.2, sysctl.2, timer_create.2, userfaultfd.2, wait.2, CPU_SET.3, abs.3, argz_add.3, backtrace.3, bsearch.3, bswap.3, clock_getcpuclockid.3, cmsg.3, dl_iterate_phdr.3, dlinfo.3, dlopen.3, drand48.3, drand48_r.3, duplocale.3, encrypt.3, endian.3, envz_add.3, errno.3, ffs.3, fopencookie.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrent_r.3, getgrouplist.3, getifaddrs.3, getline.3, getprotoent_r.3, getpwent_r.3, getpwnam.3, getservent_r.3, hsearch.3, insque.3, intro.3, lrint.3, lround.3, lseek64.3, mallinfo.3, malloc_hook.3, malloc_info.3, mbsinit.3, mbstowcs.3, mtrace.3, newlocale.3, ntp_gettime.3, offsetof.3, perror.3, posix_fallocate.3, posix_spawn.3, printf.3, psignal.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_sigmask.3, qsort.3, rand.3, random.3, rpc.3, rtnetlink.3, scalbln.3, shm_open.3, stdarg.3, strcat.3, strerror.3, strfmon.3, strptime.3, strsignal.3, strtod.3, strtok.3, strtol.3, strtoul.3, tsearch.3, wordexp.3, loop.4, vcs.4, veth.4, core.5, locale.5, slabinfo.5, cgroup_namespaces.7, cpuset.7, credentials.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, kernel_lockdown.7, man.7, mount_namespaces.7, namespaces.7, pid_namespaces.7, rtld-audit.7, sigevent.7, sock_diag.7, standards.7, unix.7, user_namespaces.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-11-01 21:56:08 +01:00
Michael Kerrisk
d39ad78f73
_exit.2, access.2, acct.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, fsync.2, futimesat.2, getdomainname.2, getgroups.2, gethostname.2, getpagesize.2, getrlimit.2, getsid.2, gettimeofday.2, kill.2, link.2, madvise.2, mincore.2, mkdir.2, mknod.2, nanosleep.2, nice.2, open.2, posix_fadvise.2, pread.2, process_vm_readv.2, readlink.2, readv.2, rename.2, select.2, semop.2, seteuid.2, setpgid.2, setreuid.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, stat.2, stime.2, symlink.2, sync.2, syscall.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, truncate.2, unlink.2, utimensat.2, vfork.2, vhangup.2, wait.2, wait4.2, a64l.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, asin.3, asinh.3, atan.3, atan2.3, atanh.3, atoi.3, bsd_signal.3, cbrt.3, ceil.3, cfree.3, clearenv.3, clock_getcpuclockid.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, daemon.3, dirfd.3, div.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, endian.3, erf.3, erfc.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, ferror.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fopen.3, fpclassify.3, frexp.3, fseeko.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent_r.3, getopt.3, getpass.3, getprotoent_r.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getservent_r.3, getspnam.3, getsubopt.3, getusershell.3, getw.3, grantpt.3, group_member.3, gsignal.3, hypot.3, ilogb.3, inet.3, inet_net_pton.3, initgroups.3, insque.3, isalpha.3, isfdtype.3, isgreater.3, iswblank.3, j0.3, killpg.3, ldexp.3, lgamma.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, malloc.3, mbsnrtowcs.3, memchr.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mq_receive.3, mq_send.3, nan.3, newlocale.3, nextafter.3, nl_langinfo.3, on_exit.3, open_memstream.3, opendir.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, printf.3, profil.3, psignal.3, pthread_attr_setstack.3, pthread_cleanup_push_defer_np.3, pthread_kill.3, pthread_mutex_consistent.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, ptsname.3, putenv.3, putpwent.3, qecvt.3, qsort.3, rand.3, random.3, random_r.3, rcmd.3, readdir_r.3, realpath.3, remainder.3, remquo.3, rint.3, round.3, rpmatch.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setnetgrent.3, siginterrupt.3, signbit.3, significand.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sockatmark.3, sqrt.3, stpcpy.3, stpncpy.3, strdup.3, strerror.3, strfromd.3, strnlen.3, strsep.3, strsignal.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpnam.3, toascii.3, toupper.3, towlower.3, towupper.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, unlocked_stdio.3, unlockpt.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wordexp.3, wprintf.3, y0.3: srcfix: use better macros in SYNOPSIS
...
Around the text:
"Feature Test Macro Requirements for glibc..."
replace ".in -4n/.in" with ".RS -4/.RE".
The latter form is more idiomatic use of man macros.
The nroff output is unchanged.
Reported-by: G. Branden Robinson <g.branden.robinson@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-09-29 15:12:12 +02:00
Marko Hrastovec
a23b00988a
freeaddrinfo.3: Fix memory leaks in freeaddrinfo() examples
...
[mtk: the coding style used in the example could lead people to
inject memory leaks in their code if they cut/paste/modify the
code to replace "exit" paths with "return" paths from a library
function.]
[Marko, from the mail thread discussing this patch:]
You are right about terminating the process. However, people copy
that example and put the code in a function changing "exit" to
"return". There are a bunch of examples like that here
https://beej.us/guide/bgnet/html/#poll , for instance. That error
bothered me when reading the network programming guide
https://beej.us/guide/bgnet/html/ . Than I looked for information
elsewhere:
https://stackoverflow.com/questions/6712740/valgrind-reporting-that-getaddrinfo-is-leaking-memory
https://stackoverflow.com/questions/15690303/server-client-sockets-freeaddrinfo3-placement
And finally, I checked manual pages and saw where these errors
come from.
When you change that to a function and return without doing
freeaddrinfo, that is a memory leak. I believe an example should
show good programming practices. Relying on exiting and clearing
the memory in that case is not such a case. In my opinion, these
examples lead people to make mistakes in their programs.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-09-17 09:12:24 +02:00
Michael Kerrisk
88893a773c
sprof.1, eventfd.2, execve.2, futex.2, getdents.2, mprotect.2, open_by_handle_at.2, recvmmsg.2, sched_setaffinity.2, CPU_SET.3, backtrace.3, bsearch.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, envz_add.3, fopencookie.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrent_r.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, hsearch.3, mallinfo.3, malloc_info.3, mbstowcs.3, mtrace.3, pthread_create.3, pthread_getcpuclockid.3, pthread_setaffinity_np.3, qsort.3, rand.3, strcat.3, strtok.3, tsearch.3, wordexp.3, core.5, aio.7, inotify.7, sock_diag.7, unix.7, user_namespaces.7: Use C99 style to declare loop counter variables
...
Rather than:
sometype x;
for (x = ....; ...)
use
for (sometype x = ...; ...)
This brings the declaration and use closer together (thus aiding
readability) and also clearly indicates the scope of the loop
counter variable.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-09-05 17:20:12 +02:00
Alejandro Colomar
facc3c56fe
getaddrinfo.3: Use sizeof consistently
...
Use ``sizeof`` consistently through all the examples in the following
way:
- Use the name of the variable instead of its type as argument for
``sizeof``.
Rationale:
https://www.kernel.org/doc/html/v5.8/process/coding-style.html#allocating-memory
Signed-off-by: Alejandro Colomar <colomar.6.4.3@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-09-05 14:49:42 +02:00
Alejandro Colomar
8e4dfb59d7
getaddrinfo.3: Use sizeof consistently
...
Use ``sizeof`` consistently through all the examples in the following
way:
- Use the name of the variable instead of its type as argument for
``sizeof``.
Rationale:
https://www.kernel.org/doc/html/v5.8/process/coding-style.html#allocating-memory
Signed-off-by: Alejandro Colomar <colomar.6.4.3@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-09-05 14:49:42 +02:00
Bjarni Ingi Gislason
7f740303b2
man3/*: srcfix: fix warnings from "mandoc -Tlint"
...
Remove superfluous paragraph macros.
Remove request ".br" if it precedes a line, that begins with a
space, as such lines automatically cause a break.
There is no change in the output from "nroff" and "groff".
###
Examples of warnings from "mandoc -Tlint":
mandoc: bindresvport.3:41:2: WARNING: skipping paragraph macro: PP after SH
mandoc: crypt.3:228:2: WARNING: skipping paragraph macro: PP empty
mandoc: dlinfo.3:151:2: WARNING: skipping paragraph macro: IP empty
mandoc: exec.3:86:2: WARNING: skipping paragraph macro: PP after SS
mandoc: getsubopt.3:45:2: WARNING: skipping paragraph macro: br before text line with leading blank
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-06-21 09:22:01 +02:00
Michael Kerrisk
a14af333d6
Various pages: retitle EXAMPLE section heading to EXAMPLES
...
EXAMPLES appears to be the wider majority usage across various
projects' manual pages, and is also what is used in the POSIX
manual pages.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-05-31 10:45:27 +02:00
Michael Kerrisk
e8426ca2b4
getent.1, localedef.1, accept.2, arch_prctl.2, clock_getres.2, clock_nanosleep.2, connect.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, execve.2, getitimer.2, getsockopt.2, gettid.2, inotify_add_watch.2, inotify_init.2, io_submit.2, ioctl.2, lseek.2, madvise.2, mlock.2, mmap.2, mprotect.2, msgctl.2, msgop.2, open_by_handle_at.2, openat2.2, pidfd_open.2, poll.2, prctl.2, quotactl.2, s390_sthyi.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, setns.2, shmctl.2, shmget.2, shmop.2, sigaction.2, stat.2, statx.2, syscalls.2, timer_create.2, timerfd_create.2, unshare.2, wait.2, CPU_SET.3, aio_init.3, atoi.3, des_crypt.3, dirfd.3, fmemopen.3, fopencookie.3, ftok.3, fts.3, getaddrinfo.3, getifaddrs.3, getrpcent.3, gsignal.3, lio_listio.3, nl_langinfo.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, scanf.3, sem_init.3, sem_post.3, shm_open.3, strcmp.3, strftime.3, st.4, elf.5, group.5, proc.5, services.5, aio.7, cgroups.7, feature_test_macros.7, keyrings.7, man-pages.7, namespaces.7, path_resolution.7, sigevent.7, signal.7, socket.7, sysvipc.7, time.7, udp.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-04-11 22:07:24 +02:00
Michael Kerrisk
0019177eac
getent.1, localedef.1, clock_nanosleep.2, fcntl.2, getitimer.2, getsockopt.2, inotify_init.2, ioctl.2, mlock.2, mprotect.2, quotactl.2, s390_sthyi.2, semctl.2, shmctl.2, shmget.2, wait.2, CPU_SET.3, aio_init.3, des_crypt.3, fmemopen.3, fopencookie.3, fts.3, getaddrinfo.3, getrpcent.3, lio_listio.3, posix_spawn.3, shm_open.3, st.4, elf.5, group.5, proc.5, services.5, aio.7, feature_test_macros.7, keyrings.7, man-pages.7, sigevent.7, tcp.7, udp.7: Global formatting fix: disfavor nonstandard .TP indents
...
In many cases, these don't improve readability, and (when stacked)
they sometimes have the side effect of sometimes forcing text
to be justified within a narrow column range.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-02-23 09:58:23 +01:00
Michael Kerrisk
9ba0180298
getent.1, iconv.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, pldd.1, sprof.1, time.1, _syscall.2, accept.2, add_key.2, adjtimex.2, bind.2, bpf.2, capget.2, chown.2, chroot.2, clock_getres.2, clone.2, connect.2, copy_file_range.2, epoll_ctl.2, epoll_wait.2, eventfd.2, fanotify_init.2, fanotify_mark.2, fcntl.2, fsync.2, futex.2, getcpu.2, getdents.2, getgid.2, getgroups.2, getpid.2, gettid.2, gettimeofday.2, getuid.2, getxattr.2, inotify_add_watch.2, inotify_init.2, ioctl_fat.2, ioctl_ns.2, ioctl_userfaultfd.2, ioprio_set.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, madvise.2, memfd_create.2, migrate_pages.2, mount.2, mprotect.2, mremap.2, msgctl.2, msgop.2, nfsservctl.2, open_by_handle_at.2, perf_event_open.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, readahead.2, readdir.2, readlink.2, reboot.2, recvmmsg.2, removexattr.2, rename.2, request_key.2, s390_guarded_storage.2, s390_runtime_instr.2, s390_sthyi.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, seccomp.2, select.2, select_tut.2, semctl.2, sendmmsg.2, set_thread_area.2, setgid.2, setns.2, setuid.2, setxattr.2, shmctl.2, sigaction.2, signalfd.2, sigsuspend.2, socket.2, socketpair.2, spu_run.2, stat.2, statx.2, subpage_prot.2, syscalls.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, vmsplice.2, write.2, CPU_SET.3, __ppc_get_timebase.3, alloca.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bsd_signal.3, bstring.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, cmsg.3, confstr.3, ctermid.3, ctime.3, des_crypt.3, dl_iterate_phdr.3, dlinfo.3, dlsym.3, duplocale.3, end.3, endian.3, errno.3, exec.3, exit.3, ferror.3, fgetws.3, fmemopen.3, fnmatch.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isatty.3, iswblank.3, iswspace.3, lockf.3, makecontext.3, mallinfo.3, malloc.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, putenv.3, qsort.3, rand.3, random.3, readdir.3, regex.3, resolver.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcmp.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, system.3, termios.3, trunc.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, xcrypt.3, console_codes.4, dsp56k.4, full.4, initrd.4, lirc.4, loop.4, st.4, tty.4, vcs.4, charmap.5, core.5, host.conf.5, locale.5, proc.5, repertoiremap.5, resolv.conf.5, termcap.5, tmpfs.5, tzfile.5, aio.7, capabilities.7, cgroup_namespaces.7, cgroups.7, charsets.7, complex.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, locale.7, man-pages.7, man.7, namespaces.7, pid_namespaces.7, pkeys.7, pthreads.7, rtld-audit.7, sched.7, signal.7, sock_diag.7, socket.7, tcp.7, udp.7, unicode.7, user_namespaces.7, utf-8.7, zdump.8, zic.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-03-06 15:12:10 +01:00
Michael Kerrisk
d1a719857b
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
...
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54 , the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 15:32:50 +01:00
Michael Kerrisk
1605ddac8f
getaddrinfo.3: Fix off-by-one error in example client program
...
Reported-by: Eric Sanchis <eric.sanchis@iut-rodez.fr>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-11-17 08:11:07 +01:00
Michael Kerrisk
4b8c67d976
iconv.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, mtrace.1, pldd.1, sprof.1, time.1, _syscall.2, add_key.2, alloc_hugepages.2, arch_prctl.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fallocate.2, fanotify_init.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_console.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_iflags.2, ioctl_list.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, open_by_handle_at.2, outb.2, perf_event_open.2, perfmonctl.2, personality.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, reboot.2, recv.2, recvmmsg.2, remap_file_pages.2, rename.2, request_key.2, restart_syscall.2, rt_sigqueueinfo.2, s390_pci_mmio_write.2, s390_runtime_instr.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscall.2, syscalls.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timer_create.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cfree.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, cmsg.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console_codes.4, dsp56k.4, fuse.4, hd.4, hpsa.4, initrd.4, intro.4, loop.4, random.4, rtc.4, sd.4, sk98lin.4, st.4, wavelan.4, acct.5, core.5, elf.5, filesystems.5, host.conf.5, hosts.5, locale.5, nologin.5, proc.5, resolv.conf.5, rpc.5, slabinfo.5, utmp.5, aio.7, arp.7, bootparam.7, capabilities.7, cgroup_namespaces.7, cgroups.7, charsets.7, cpuset.7, ddp.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, futex.7, inode.7, inotify.7, ip.7, ipv6.7, keyrings.7, locale.7, man-pages.7, man.7, math_error.7, mount_namespaces.7, mq_overview.7, namespaces.7, netdevice.7, netlink.7, packet.7, pipe.7, pkeys.7, pthreads.7, pty.7, raw.7, rtld-audit.7, rtnetlink.7, sched.7, session-keyring.7, signal.7, sock_diag.7, socket.7, spufs.7, suffixes.7, tcp.7, udp.7, udplite.7, unicode.7, units.7, unix.7, uri.7, user_namespaces.7, vdso.7, x25.7, xattr.7, iconvconfig.8, ld.so.8, ldconfig.8, sln.8: Update timestamps
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-09-15 12:44:56 +02:00
Michael Kerrisk
207050fa9e
_syscall.2, shmget.2, stat.2, syscall.2, sysctl.2, utimensat.2, wait.2, CPU_SET.3, a64l.3, alloca.3, atexit.3, basename.3, cacos.3, cacosh.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, ccos.3, ccosh.3, cexp.3, cimag.3, clearenv.3, clog.3, conj.3, cosh.3, creal.3, csin.3, csinh.3, ctan.3, ctanh.3, difftime.3, div.3, dl_iterate_phdr.3, encrypt.3, envz_add.3, expm1.3, fenv.3, fmtmsg.3, fopen.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getcontext.3, getline.3, getpt.3, getpwnam.3, getsubopt.3, getttyent.3, getutent.3, hsearch.3, log1p.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbsinit.3, mempcpy.3, mtrace.3, nan.3, nl_langinfo.3, printf.3, pthread_setaffinity_np.3, pthread_tryjoin_np.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, sigvec.3: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-19 13:47:27 +02:00
Michael Kerrisk
b8302363ed
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
...
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-19 13:47:27 +02:00
Michael Kerrisk
e646a1bad9
ioctl_console.2, ioctl_getfsmap.2, ioctl_iflags.2, ioctl_list.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, link.2, mmap.2, modify_ldt.2, msgctl.2, poll.2, query_module.2, quotactl.2, recv.2, recvmmsg.2, sched_setscheduler.2, seccomp.2, select.2, semctl.2, semop.2, send.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sysinfo.2, timer_create.2, timerfd_create.2, uname.2, unshare.2, userfaultfd.2, ustat.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, backtrace.3, bswap.3, btree.3, clock_getcpuclockid.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, fmemopen.3, fopencookie.3, frexp.3, fts.3, ftw.3, getaddrinfo.3, getaddrinfo_a.3, getcontext.3, getgrouplist.3, getifaddrs.3, getipnodebyname.3, getnameinfo.3, getopt.3, getprotoent_r.3, getpwent_r.3, getrpcent.3, getservent_r.3, getttyent.3, getumask.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, inet.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallopt.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mtrace.3, newlocale.3, ntp_gettime.3, offsetof.3, posix_openpt.3, printf.3, pthread_setname_np.3, pthread_setschedparam.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, sigvec.3, stdarg.3, strcat.3, strcpy.3, strftime.3, strtol.3, toupper.3, ttyslot.3, fuse.4, loop.4, st.4, elf.5, cgroup_namespaces.7, cgroups.7, feature_test_macros.7, inode.7, inotify.7, keyrings.7, man-pages.7, math_error.7, mount_namespaces.7, mq_overview.7, pthreads.7, sched.7, session-keyring.7, udplite.7, unix.7, vdso.7: Use consistent markup for code snippets
...
The preferred form is
.PP/.IP
.in +4n
.EX
<code>
.EE
.in
.PP/.IP
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-19 13:47:26 +02:00
Michael Kerrisk
51f5698d3c
capget.2, gettimeofday.2, nanosleep.2, process_vm_readv.2, readv.2, seccomp.2, semop.2, sigaction.2, sigwaitinfo.2, dbopen.3, dladdr.3, ether_aton.3, fenv.3, fgetgrent.3, fgetpwent.3, frexp.3, ftime.3, gamma.3, getaddrinfo.3, getaddrinfo_a.3, getgrent_r.3, getgrnam.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnetent.3, getprotoent.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getservent.3, getspnam.3, getutent.3, glob.3, hsearch.3, if_nameindex.3, inet.3, mq_receive.3, putgrent.3, putpwent.3, rand.3, sigqueue.3, strfromd.3, strptime.3, strtol.3, termios.3, timeradd.3, lp.4, tty.4, ip.7, ipv6.7, netdevice.7, raw.7, rtnetlink.7, units.7, zic.8: ffix: replace .sp by .PP
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 01:00:48 +02:00
Michael Kerrisk
bdd915e20f
_syscall.2, capget.2, ioprio_set.2, semop.2, send.2, ctime.3, dysize.3, fenv.3, fmtmsg.3, ftok.3, ftw.3, getaddrinfo.3, getgrent_r.3, gethostbyname.3, getopt.3, getpw.3, getpwent_r.3, getsubopt.3, getutent.3, glob.3, if_nameindex.3, inet.3, lseek64.3, malloc_hook.3, mbrtowc.3, mkstemp.3, mq_receive.3, mq_send.3, posix_spawn.3, putgrent.3, putpwent.3, qsort.3, raise.3, rand.3, rtime.3, setaliasent.3, setbuf.3, shm_open.3, significand.3, sigqueue.3, statvfs.3, strfromd.3, strptime.3, strtol.3, strtoul.3, termios.3, tgamma.3, timeradd.3, tsearch.3, tzset.3, updwtmp.3, usleep.3, wcstok.3, console_codes.4, hd.4, hpsa.4, mem.4, null.4, ram.4, sd.4, ttyS.4, filesystems.5, group.5, passwd.5, shells.5, termcap.5, ttytype.5, tzfile.5, utmp.5, ascii.7, bootparam.7, complex.7, cpuset.7, epoll.7: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-17 23:40:17 +02:00
Michael Kerrisk
847e0d8871
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
...
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 05:13:02 +02:00
Michael Kerrisk
68e4db0a44
_exit.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, create_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, exit_group.2, fanotify_mark.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, ioctl.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_tty.2, ioperm.2, iopl.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_mempolicy.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shutdown.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, sync.2, sysctl.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, difftime.3, dirfd.3, div.3, dlerror.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, erf.3, erfc.3, err.3, errno.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, infnan.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, newlocale.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, y0.3, dsp56k.4, random.4, rtc.4, st.4, ddp.7, ip.7, ipv6.7, packet.7, rtnetlink.7, socket.7, tcp.7, udp.7, udplite.7, x25.7: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 17:16:29 +02:00
Michael Kerrisk
f55a6d598d
Changes, ldd.1, chown.2, epoll_wait.2, get_mempolicy.2, ioctl_getfsmap.2, madvise.2, membarrier.2, mount.2, pipe.2, readv.2, seccomp.2, sigaltstack.2, splice.2, tee.2, timer_create.2, vmsplice.2, acosh.3, asinh.3, atanh.3, bsd_signal.3, dl_iterate_phdr.3, dlsym.3, flockfile.3, fpathconf.3, ftw.3, getaddrinfo.3, getcontext.3, getgrent.3, if_nametoindex.3, malloc.3, nl_langinfo.3, posix_madvise.3, ptsname.3, rand.3, resolver.3, sigpause.3, sigwait.3, strtol.3, sysconf.3, ttyslot.3, unlocked_stdio.3, unlockpt.3, capabilities.7, cgroup_namespaces.7, inode.7, man.7, pipe.7, sigevent.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-07-13 14:22:45 +02:00
Joe Brown
5df38b3325
getaddrinfo.3: wsfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-07-05 10:39:08 +02:00
Quentin Rameau
94db8ae182
getaddrinfo.3: Fix _POSIX_C_SOURCE value for getaddrinfo()
...
The correct _POSIX_C_SOURCE value is 200112L, not 201112L in features.h.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-06-11 08:14:05 +02:00
Michael Kerrisk
3747c61417
getaddrinfo.3: srcfix: FIXME tidy-up
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-10-29 13:34:58 +02:00
Michael Kerrisk
979867082b
locale.1, localedef.1, _exit.2, accept.2, access.2, acct.2, adjtimex.2, bdflush.2, bind.2, bpf.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_ctl.2, eventfd.2, execve.2, fallocate.2, fanotify_init.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, getdomainname.2, getgroups.2, gethostname.2, getpagesize.2, getpeername.2, getsid.2, getsockname.2, getsockopt.2, gettimeofday.2, init_module.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, kexec_load.2, kill.2, killpg.2, link.2, listen.2, llseek.2, lseek.2, madvise.2, memfd_create.2, mincore.2, mkdir.2, mknod.2, mmap.2, mount.2, nanosleep.2, nice.2, open.2, personality.2, pipe.2, poll.2, posix_fadvise.2, read.2, readahead.2, readlink.2, readv.2, recv.2, recvmmsg.2, rename.2, request_key.2, sched_setaffinity.2, sched_setattr.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendfile.2, sendmmsg.2, seteuid.2, setns.2, setpgid.2, setreuid.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigsuspend.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, symlink.2, sync.2, syscall.2, syscalls.2, times.2, truncate.2, unlink.2, unshare.2, uselib.2, utimensat.2, vfork.2, vhangup.2, wait.2, wait4.2, write.2, a64l.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_read.3, aio_write.3, asin.3, asinh.3, atan.3, atan2.3, atanh.3, atoi.3, backtrace.3, cbrt.3, ceil.3, cfree.3, clearenv.3, clock_getcpuclockid.3, clog10.3, cmsg.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, daemon.3, dirfd.3, div.3, dl_iterate_phdr.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, endian.3, erf.3, erfc.3, errno.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, ferror.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmin.3, fmod.3, fopen.3, fpclassify.3, frexp.3, fseeko.3, fts.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getline.3, getloadavg.3, getmntent.3, getnameinfo.3, getnetent_r.3, getpass.3, getprotoent_r.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getservent_r.3, getspnam.3, getsubopt.3, getusershell.3, getutent.3, getw.3, gsignal.3, hypot.3, ilogb.3, inet.3, initgroups.3, insque.3, isalpha.3, isgreater.3, iswblank.3, j0.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, makedev.3, matherr.3, mbsnrtowcs.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_receive.3, mq_send.3, nan.3, nextafter.3, on_exit.3, open_memstream.3, opendir.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, psignal.3, pthread_attr_setstack.3, pthread_setaffinity_np.3, putenv.3, putpwent.3, qecvt.3, rand.3, random.3, random_r.3, rcmd.3, readdir.3, realpath.3, remainder.3, remquo.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, scalb.3, scalbln.3, scandir.3, scanf.3, seekdir.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setnetgrent.3, siginterrupt.3, signbit.3, significand.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stpcpy.3, stpncpy.3, strdup.3, strerror.3, strftime.3, strlen.3, strnlen.3, strsep.3, strsignal.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, unlocked_stdio.3, usleep.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wprintf.3, y0.3, pts.4, st.4, tty_ioctl.4, elf.5, gai.conf.5, group.5, locale.5, nsswitch.conf.5, proc.5, utmp.5, aio.7, capabilities.7, credentials.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, mq_overview.7, namespaces.7, pipe.7, signal.7, socket.7, standards.7, svipc.7, symlink.7, time.7, unicode.7, unix.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-15 17:30:43 +13:00
Michael Kerrisk
5358a2546d
getaddrinfo.3: Update FTM requirements for glibc 2.22
...
Since glibc 2.22 getaddrinfo() etc. are only declared for
POSIX.1-2001 or later.
Reported-by: Andreas Schwab <schwab@suse.de>
Reported-by: Orion Poplawski <orion@cora.nwra.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-09 02:19:11 +01:00
Michael Kerrisk
cff459dea2
kill.2, sigaction.2, sigpending.2, sigprocmask.2, sigsuspend.2, ctermid.3, ferror.3, fopen.3, getaddrinfo.3, getnameinfo.3, longjmp.3, rand.3, setjmp.3, sigsetops.3, sigwait.3, tzset.3: Simply FTM requirements
...
_XOPEN_SOURCE implies _POSIX_C_SOURCE >=2, so simplify FTM
requirements in various pages.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-01 20:01:05 +01:00
Michael Kerrisk
c1016e8767
kill.2, sigaction.2, sigpending.2, sigprocmask.2, sigsuspend.2, ctermid.3, ctime.3, ferror.3, flockfile.3, fopen.3, getaddrinfo.3, getgrnam.3, getnameinfo.3, getpwnam.3, rand.3, sigsetops.3, sigwait.3, strtok.3, tzset.3, unlocked_stdio.3, feature_test_macros.7: Remove mention of the obsolete _POSIX_SOURCE macro from SYNOPSIS
...
_POSIX_SOURCE was a POSIX.1-1990 creation that was soon made
obsolete bu _POSIX_C_SOURCE. Retaining mention of it
in the feature test macro requirements section of the
SYNOPSIS doesn't contain important information, and may
mislead readers into actually trying to use this macro.
A few mentions of it a maintained in a some pages where
defining _POSIX_SOURCE inhibits some behavior.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-03-01 20:01:04 +01:00
Jakub Wilk
40da0793a6
getaddrinfo.3: tfix
...
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-02-28 14:39:01 +01:00
Michael Kerrisk
d7abdfb656
getaddrinfo.3: CONFORMING TO: add POSIX.1-2008
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-07-24 09:32:07 +02:00
Michael Kerrisk
5722c835ab
intro.1, locale.1, _exit.2, access.2, bpf.2, brk.2, capget.2, chmod.2, chroot.2, clock_getres.2, clone.2, eventfd.2, fallocate.2, fork.2, getgroups.2, gethostname.2, getpid.2, getpriority.2, getrlimit.2, getrusage.2, gettid.2, iopl.2, ioprio_set.2, killpg.2, mlock.2, mprotect.2, perf_event_open.2, poll.2, posix_fadvise.2, pread.2, ptrace.2, read.2, readv.2, recv.2, rename.2, sched_setaffinity.2, sched_setattr.2, seccomp.2, select.2, send.2, seteuid.2, setgid.2, setresuid.2, setreuid.2, setuid.2, sigaltstack.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, stat.2, timer_create.2, uname.2, utimensat.2, wait.2, wait4.2, write.2, MB_LEN_MAX.3, __ppc_get_timebase.3, clearenv.3, dl_iterate_phdr.3, error.3, fexecve.3, fpurge.3, fread.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getgrent_r.3, gethostbyname.3, getifaddrs.3, getnameinfo.3, getnetent_r.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent_r.3, getrpcent.3, getrpcent_r.3, getrpcport.3, getservent.3, getservent_r.3, gsignal.3, key_setsecret.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, memcpy.3, mq_notify.3, mq_open.3, perror.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_detach.3, pthread_getattr_np.3, pthread_join.3, pthread_setname_np.3, pthread_tryjoin_np.3, putgrent.3, rcmd.3, rpc.3, rpmatch.3, sem_close.3, sem_open.3, setaliasent.3, shm_open.3, sigqueue.3, strfmon.3, xcrypt.3, xdr.3, console_codes.4, null.4, core.5, host.conf.5, hosts.equiv.5, locale.5, repertoiremap.5, locale.7, man-pages.7, pty.7, rtld-audit.7, sched.7, vdso.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-07-23 16:12:28 +02:00
Zeng Linggang
bb89d1ef8f
getaddrinfo.3: ATTRIBUTES: Note functions that are thread-safe
...
After research, We think getaddrinfo(), freeaddrinfo() and
gai_strerror() are thread-safe. But, there are not markings
of them in glibc document.
Signed-off-by: Zeng Linggang <zenglg.jy@cn.fujitsu.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2015-06-12 21:25:28 +02:00
Michael Kerrisk
bea08fec7e
adjtimex.2, bind.2, cacheflush.2, clone.2, fallocate.2, fanotify_init.2, fanotify_mark.2, flock.2, futex.2, getdents.2, getpriority.2, getrlimit.2, gettid.2, gettimeofday.2, ioprio_set.2, kexec_load.2, migrate_pages.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, msgop.2, nfsservctl.2, perf_event_open.2, pread.2, ptrace.2, recvmmsg.2, rename.2, restart_syscall.2, sched_setattr.2, send.2, shmop.2, shutdown.2, sigaction.2, signalfd.2, syscalls.2, timer_create.2, timerfd_create.2, tkill.2, vmsplice.2, wait.2, aio_init.3, confstr.3, exit.3, fmemopen.3, fopen.3, getaddrinfo.3, getauxval.3, getspnam.3, isalpha.3, isatty.3, mallinfo.3, malloc.3, mallopt.3, psignal.3, pthread_attr_setinheritsched.3, qecvt.3, queue.3, rtnetlink.3, strerror.3, strftime.3, toupper.3, towlower.3, towupper.3, initrd.4, locale.5, proc.5, bootparam.7, capabilities.7, ddp.7, fanotify.7, icmp.7, inotify.7, ip.7, ipv6.7, netdevice.7, netlink.7, path_resolution.7, rtld-audit.7, rtnetlink.7, sched.7, signal.7, socket.7, svipc.7, tcp.7, unix.7, ld.so.8: srcfix: Update FIXMEs
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-21 16:47:44 -05:00
Michael Kerrisk
b8dbf73de8
bdflush.2, fsync.2, mmap.2, open.2, perf_event_open.2, sync.2, syscall.2, fmemopen.3, getaddrinfo.3, getline.3, mq_notify.3, offsetof.3, aio.7, symlink.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-04-06 08:47:35 +02:00
Michael Kerrisk
4c3fac103d
getaddrinfo.3: grfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-03-26 07:33:16 +01:00
Michael Kerrisk
8c5fcd21e5
fmemopen.3, getaddrinfo.3, mq_notify.3, offsetof.3, aio.7: Print size_t/ssize_t values using %z printf() modifier
...
There are fewer and fewer systems these days that don't
support the %z specifier mandated in C99. So replace the
use of %ld/%lu + (long) cast with %zd/%zu.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-03-19 15:09:14 +01:00
Michael Kerrisk
b437fdd90a
epoll_ctl.2, execve.2, recv.2, timer_create.2, wait.2, argz_add.3, basename.3, dlopen.3, exec.3, fopencookie.3, fts.3, getaddrinfo.3, getcwd.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getlogin.3, getnetent.3, getprotoent.3, getrpcent.3, getservent.3, getusershell.3, glob.3, if_nameindex.3, inet_ntop.3, lio_listio.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mq_notify.3, ptsname.3, realpath.3, setnetgrent.3, sigvec.3, strsignal.3, strtok.3, wcrtomb.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, xdr.3: Global fix of "NULL pointer"
...
Change "NULL pointer: to "NUL " or null pointer".
POSIX uses the term "null pointer", not "NULL pointer".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-01-03 15:47:06 +13:00
Michael Kerrisk
2534ef153e
getaddrinfo.3: Explain one use case for AI_ADDRCONFIG
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-11-08 14:24:57 +13:00
Michael Kerrisk
bf68db183b
getaddrinfo.3: Highlight difference in ai_flags when hints==NULL
...
NOTES already described how glibc differs from POSIX.
Add a pointer to that text from the point in DESCRIPTION
where hints==NULL is discussed.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-11-08 14:18:44 +13:00
Michael Kerrisk
290e89bd22
getaddrinfo.3: tfix
...
Reviewed-by: Damien Grassart <damien@grassart.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-04-19 13:23:41 +02:00