2012-03-08 21:15:58 +00:00
|
|
|
.\" Copyright (c) 2012 by Michael Kerrisk <mtk.manpages@gmail.com>
|
2011-09-19 15:14:30 +00:00
|
|
|
.\"
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:01 +00:00
|
|
|
.\" %%%LICENSE_START(VERBATIM)
|
2011-09-19 15:14:30 +00:00
|
|
|
.\" Permission is granted to make and distribute verbatim copies of this
|
|
|
|
.\" manual provided the copyright notice and this permission notice are
|
|
|
|
.\" preserved on all copies.
|
|
|
|
.\"
|
|
|
|
.\" Permission is granted to copy and distribute modified versions of this
|
|
|
|
.\" manual under the conditions for verbatim copying, provided that the
|
|
|
|
.\" entire resulting derived work is distributed under the terms of a
|
|
|
|
.\" permission notice identical to this one.
|
|
|
|
.\"
|
|
|
|
.\" Since the Linux kernel and libraries are constantly changing, this
|
|
|
|
.\" manual page may be incorrect or out-of-date. The author(s) assume no
|
|
|
|
.\" responsibility for errors or omissions, or for damages resulting from
|
|
|
|
.\" the use of the information contained herein. The author(s) may not
|
|
|
|
.\" have taken the same level of care in the production of this manual,
|
|
|
|
.\" which is licensed free of charge, as they might when working
|
|
|
|
.\" professionally.
|
|
|
|
.\"
|
|
|
|
.\" Formatted or processed versions of this manual, if unaccompanied by
|
|
|
|
.\" the source, must acknowledge the copyright and authors of this work.
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:40 +00:00
|
|
|
.\" %%%LICENSE_END
|
2011-09-19 15:14:30 +00:00
|
|
|
.\"
|
iconv.1, locale.1, memusage.1, memusagestat.1, pldd.1, sprof.1, _syscall.2, add_key.2, adjtimex.2, bind.2, bpf.2, chown.2, clone.2, close.2, copy_file_range.2, eventfd.2, fanotify_init.2, fanotify_mark.2, fork.2, fsync.2, futex.2, getdents.2, getrlimit.2, getxattr.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, ioctl_fat.2, ioctl_getfsmap.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, kcmp.2, keyctl.2, listen.2, listxattr.2, mbind.2, membarrier.2, memfd_create.2, mkdir.2, move_pages.2, mremap.2, msync.2, nfsservctl.2, open.2, perf_event_open.2, pidfd_send_signal.2, pipe.2, pivot_root.2, pkey_alloc.2, process_vm_readv.2, ptrace.2, readlink.2, readv.2, recv.2, recvmmsg.2, rename.2, request_key.2, s390_runtime_instr.2, sched_setaffinity.2, seccomp.2, send.2, sendmmsg.2, sigaltstack.2, signalfd.2, socket.2, socketpair.2, splice.2, spu_create.2, spu_run.2, statfs.2, syscall.2, sysctl.2, sysfs.2, tee.2, timer_getoverrun.2, timer_settime.2, umount.2, userfaultfd.2, utimensat.2, wait4.2, INFINITY.3, __ppc_get_timebase.3, __setfpucw.3, abort.3, aio_cancel.3, aio_error.3, aio_read.3, aio_return.3, atexit.3, backtrace.3, basename.3, bsearch.3, bswap.3, cacos.3, cacosh.3, catan.3, catanh.3, cexp2.3, clock_getcpuclockid.3, clog2.3, cmsg.3, confstr.3, div.3, dl_iterate_phdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, err.3, expm1.3, fdim.3, flockfile.3, fmtmsg.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo_a.3, getauxval.3, getdate.3, getdtablesize.3, getgrent_r.3, getgrouplist.3, gethostbyname.3, getline.3, getnameinfo.3, getopt.3, getprotoent_r.3, getpwent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, getutent.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, insque.3, killpg.3, makecontext.3, mallinfo.3, malloc.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbstowcs.3, mcheck.3, mempcpy.3, mq_getattr.3, mq_notify.3, mtrace.3, newlocale.3, nextafter.3, ntp_gettime.3, offsetof.3, open_memstream.3, pow.3, printf.3, pthread_attr_init.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setstack.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_detach.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_mutex_consistent.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_spin_init.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, qsort.3, rand.3, random.3, remainder.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, sem_getvalue.3, sem_wait.3, setaliasent.3, setlogmask.3, sigwait.3, sincos.3, sockatmark.3, stdarg.3, stpcpy.3, strcat.3, strfmon.3, strptime.3, strtod.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, tsearch.3, uselocale.3, wcstok.3, wcstombs.3, wordexp.3, y0.3, loop.4, vcs.4, veth.4, charmap.5, core.5, filesystems.5, gai.conf.5, hosts.5, hosts.equiv.5, locale.5, nss.5, repertoiremap.5, securetty.5, shells.5, ttytype.5, ascii.7, complex.7, cpuset.7, credentials.7, fanotify.7, hier.7, inotify.7, ip.7, mount_namespaces.7, mq_overview.7, netlink.7, network_namespaces.7, pid_namespaces.7, pkeys.7, rtld-audit.7, rtnetlink.7, sem_overview.7, signal-safety.7, sock_diag.7, spufs.7, standards.7, symlink.7, tcp.7, time_namespaces.7, unix.7, user_namespaces.7, xattr.7, ldconfig.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-06-09 12:43:54 +00:00
|
|
|
.TH MALLINFO 3 2020-06-09 "Linux" "Linux Programmer's Manual"
|
2011-09-19 15:14:30 +00:00
|
|
|
.SH NAME
|
|
|
|
mallinfo \- obtain memory allocation information
|
|
|
|
.SH SYNOPSIS
|
|
|
|
.B #include <malloc.h>
|
_exit.2, accept.2, chmod.2, dup.2, getgroups.2, keyctl.2, link.2, mkdir.2, mknod.2, pipe.2, poll.2, reboot.2, rename.2, select.2, select_tut.2, stat.2, symlink.2, unlink.2, __ppc_get_timebase.3, abs.3, bzero.3, crypt.3, dbopen.3, dl_iterate_phdr.3, dlinfo.3, dlsym.3, duplocale.3, encrypt.3, err.3, ffs.3, fpurge.3, ftw.3, getdate.3, gethostbyname.3, getlogin.3, getmntent.3, getpwent_r.3, getpwnam.3, getspnam.3, inet_pton.3, insque.3, isfdtype.3, mallinfo.3, mallopt.3, matherr.3, mcheck.3, mempcpy.3, mkfifo.3, mq_getattr.3, newlocale.3, open_memstream.3, openpty.3, perror.3, posix_memalign.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setaffinity_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, regex.3, resolver.3, rpmatch.3, rtnetlink.3, scanf.3, setbuf.3, strchr.3, strfromd.3, strverscmp.3, termios.3, tsearch.3, unlocked_stdio.3, updwtmp.3, netlink.7, rtld-audit.7, sock_diag.7, unix.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 15:44:09 +00:00
|
|
|
.PP
|
2011-09-19 15:14:30 +00:00
|
|
|
.B struct mallinfo mallinfo(void);
|
|
|
|
.SH DESCRIPTION
|
|
|
|
The
|
|
|
|
.BR mallinfo ()
|
|
|
|
function returns a copy of a structure containing information about
|
|
|
|
memory allocations performed by
|
|
|
|
.BR malloc (3)
|
|
|
|
and related functions.
|
2019-04-30 19:36:46 +00:00
|
|
|
.PP
|
|
|
|
Note that not all allocations are visible to
|
|
|
|
.BR mallinfo ();
|
|
|
|
see BUGS and consider using
|
|
|
|
.BR malloc_info (3)
|
|
|
|
instead.
|
|
|
|
.PP
|
|
|
|
The returned structure is defined as follows:
|
2011-09-19 15:14:30 +00:00
|
|
|
.PP
|
|
|
|
.in +4n
|
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:52:46 +00:00
|
|
|
.EX
|
2011-09-19 15:14:30 +00:00
|
|
|
struct mallinfo {
|
|
|
|
int arena; /* Non-mmapped space allocated (bytes) */
|
|
|
|
int ordblks; /* Number of free chunks */
|
|
|
|
int smblks; /* Number of free fastbin blocks */
|
|
|
|
int hblks; /* Number of mmapped regions */
|
|
|
|
int hblkhd; /* Space allocated in mmapped regions (bytes) */
|
|
|
|
int usmblks; /* Maximum total allocated space (bytes) */
|
|
|
|
int fsmblks; /* Space in freed fastbin blocks (bytes) */
|
|
|
|
int uordblks; /* Total allocated space (bytes) */
|
|
|
|
int fordblks; /* Total free space (bytes) */
|
|
|
|
int keepcost; /* Top-most, releasable space (bytes) */
|
|
|
|
};
|
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:52:46 +00:00
|
|
|
.EE
|
2011-09-19 15:14:30 +00:00
|
|
|
.in
|
|
|
|
.PP
|
|
|
|
The fields of the
|
|
|
|
.I mallinfo
|
|
|
|
structure contain the following information:
|
|
|
|
.TP 10
|
|
|
|
.I arena
|
|
|
|
The total amount of memory allocated by means other than
|
|
|
|
.BR mmap (2)
|
|
|
|
(i.e., memory allocated on the heap).
|
|
|
|
This figure includes both in-use blocks and blocks on the free list.
|
|
|
|
.TP
|
|
|
|
.I ordblks
|
|
|
|
The number of ordinary (i.e., non-fastbin) free blocks.
|
|
|
|
.TP
|
|
|
|
.I smblks
|
|
|
|
The number of fastbin free blocks (see
|
|
|
|
.BR mallopt (3)).
|
|
|
|
.TP
|
|
|
|
.I hblks
|
|
|
|
The number of blocks currently allocated using
|
|
|
|
.BR mmap (2).
|
2012-05-05 21:49:40 +00:00
|
|
|
(See the discussion of
|
|
|
|
.B M_MMAP_THRESHOLD
|
|
|
|
in
|
|
|
|
.BR mallopt (3).)
|
2011-09-19 15:14:30 +00:00
|
|
|
.TP
|
|
|
|
.I hblkhd
|
|
|
|
The number of bytes in blocks currently allocated using
|
|
|
|
.BR mmap (2).
|
|
|
|
.TP
|
|
|
|
.I usmblks
|
|
|
|
The "highwater mark" for allocated space\(emthat is,
|
|
|
|
the maximum amount of space that was ever allocated.
|
|
|
|
This field is maintained only in nonthreading environments.
|
|
|
|
.TP
|
|
|
|
.I fsmblks
|
|
|
|
The total number of bytes in fastbin free blocks.
|
|
|
|
.TP
|
|
|
|
.I uordblks
|
|
|
|
The total number of bytes used by in-use allocations.
|
|
|
|
.TP
|
|
|
|
.I fordblks
|
|
|
|
The total number of bytes in free blocks.
|
|
|
|
.TP
|
|
|
|
.I keepcost
|
|
|
|
The total amount of releasable free space at the top
|
|
|
|
of the heap.
|
|
|
|
This is the maximum number of bytes that could ideally
|
|
|
|
(i.e., ignoring page alignment restrictions, and so on) be released by
|
|
|
|
.BR malloc_trim (3).
|
|
|
|
.\" .SH VERSIONS
|
|
|
|
.\" Available already in glibc 2.0, possibly earlier
|
2015-08-24 10:19:54 +00:00
|
|
|
.SH ATTRIBUTES
|
|
|
|
For an explanation of the terms used in this section, see
|
|
|
|
.BR attributes (7).
|
|
|
|
.TS
|
|
|
|
allbox;
|
|
|
|
lb lb lbw28
|
|
|
|
l l l.
|
|
|
|
Interface Attribute Value
|
|
|
|
T{
|
|
|
|
.BR mallinfo ()
|
|
|
|
T} Thread safety MT-Unsafe init const:mallopt
|
|
|
|
.TE
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.sp 1
|
2015-08-24 10:19:54 +00:00
|
|
|
.BR mallinfo ()
|
2016-10-08 19:10:26 +00:00
|
|
|
would access some global internal objects.
|
|
|
|
If modify them with non-atomically,
|
2015-08-24 10:19:54 +00:00
|
|
|
may get inconsistent results.
|
|
|
|
The identifier
|
|
|
|
.I mallopt
|
|
|
|
in
|
|
|
|
.I const:mallopt
|
|
|
|
mean that
|
|
|
|
.BR mallopt ()
|
2016-10-08 19:10:01 +00:00
|
|
|
would modify the global internal objects with atomics, that make sure
|
2015-08-24 10:19:54 +00:00
|
|
|
.BR mallinfo ()
|
|
|
|
is safe enough, others modify with non-atomically maybe not.
|
2011-09-19 15:14:30 +00:00
|
|
|
.SH CONFORMING TO
|
|
|
|
This function is not specified by POSIX or the C standards.
|
|
|
|
A similar function exists on many System V derivatives,
|
|
|
|
and was specified in the SVID.
|
2012-02-26 23:10:28 +00:00
|
|
|
.SH BUGS
|
adjtimex.2, bind.2, cacheflush.2, clone.2, fallocate.2, fanotify_init.2, fanotify_mark.2, flock.2, futex.2, getdents.2, getpriority.2, getrlimit.2, gettid.2, gettimeofday.2, ioprio_set.2, kexec_load.2, migrate_pages.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, msgop.2, nfsservctl.2, perf_event_open.2, pread.2, ptrace.2, recvmmsg.2, rename.2, restart_syscall.2, sched_setattr.2, send.2, shmop.2, shutdown.2, sigaction.2, signalfd.2, syscalls.2, timer_create.2, timerfd_create.2, tkill.2, vmsplice.2, wait.2, aio_init.3, confstr.3, exit.3, fmemopen.3, fopen.3, getaddrinfo.3, getauxval.3, getspnam.3, isalpha.3, isatty.3, mallinfo.3, malloc.3, mallopt.3, psignal.3, pthread_attr_setinheritsched.3, qecvt.3, queue.3, rtnetlink.3, strerror.3, strftime.3, toupper.3, towlower.3, towupper.3, initrd.4, locale.5, proc.5, bootparam.7, capabilities.7, ddp.7, fanotify.7, icmp.7, inotify.7, ip.7, ipv6.7, netdevice.7, netlink.7, path_resolution.7, rtld-audit.7, rtnetlink.7, sched.7, signal.7, socket.7, svipc.7, tcp.7, unix.7, ld.so.8: srcfix: Update FIXMEs
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2014-08-21 21:47:44 +00:00
|
|
|
.\" FIXME . http://sourceware.org/bugzilla/show_bug.cgi?id=208
|
2012-02-26 23:10:28 +00:00
|
|
|
.\" See the 24 Aug 2011 mail by Paul Pluzhnikov:
|
|
|
|
.\" "[patch] Fix mallinfo() to accumulate results for all arenas"
|
|
|
|
.\" on libc-alpha@sourceware.org
|
2012-03-08 21:15:58 +00:00
|
|
|
.B Information is returned for only the main memory allocation area.
|
|
|
|
Allocations in other arenas are excluded.
|
|
|
|
See
|
|
|
|
.BR malloc_stats (3)
|
|
|
|
and
|
|
|
|
.BR malloc_info (3)
|
|
|
|
for alternatives that include information about other arenas.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2011-09-19 15:14:30 +00:00
|
|
|
The fields of the
|
|
|
|
.I mallinfo
|
|
|
|
structure are typed as
|
|
|
|
.IR int .
|
|
|
|
However, because some internal bookkeeping values may be of type
|
|
|
|
.IR long ,
|
|
|
|
the reported values may wrap around zero and thus be inaccurate.
|
2020-05-21 08:00:37 +00:00
|
|
|
.SH EXAMPLES
|
2011-09-19 15:14:30 +00:00
|
|
|
The program below employs
|
|
|
|
.BR mallinfo ()
|
|
|
|
to retrieve memory allocation statistics before and after
|
|
|
|
allocating and freeing some blocks of memory.
|
|
|
|
The statistics are displayed on standard output.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2011-09-19 15:14:30 +00:00
|
|
|
The first two command-line arguments specify the number and size of
|
|
|
|
blocks to be allocated with
|
|
|
|
.BR malloc (3).
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2011-09-19 15:14:30 +00:00
|
|
|
The remaining three arguments specify which of the allocated blocks
|
|
|
|
should be freed with
|
|
|
|
.BR free (3).
|
|
|
|
These three arguments are optional, and specify (in order):
|
|
|
|
the step size to be used in the loop that frees blocks
|
|
|
|
(the default is 1, meaning free all blocks in the range);
|
|
|
|
the ordinal position of the first block to be freed
|
|
|
|
(default 0, meaning the first allocated block);
|
|
|
|
and a number one greater than the ordinal position
|
|
|
|
of the last block to be freed
|
|
|
|
(default is one greater than the maximum block number).
|
|
|
|
If these three arguments are omitted,
|
|
|
|
then the defaults cause all allocated blocks to be freed.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2011-09-19 15:14:30 +00:00
|
|
|
In the following example run of the program,
|
|
|
|
1000 allocations of 100 bytes are performed,
|
|
|
|
and then every second allocated block is freed:
|
|
|
|
.PP
|
|
|
|
.in +4n
|
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:52:46 +00:00
|
|
|
.EX
|
2011-09-19 15:14:30 +00:00
|
|
|
$ \fB./a.out 1000 100 2\fP
|
|
|
|
============== Before allocating blocks ==============
|
|
|
|
Total non\-mmapped bytes (arena): 0
|
|
|
|
# of free chunks (ordblks): 1
|
|
|
|
# of free fastbin blocks (smblks): 0
|
|
|
|
# of mapped regions (hblks): 0
|
|
|
|
Bytes in mapped regions (hblkhd): 0
|
|
|
|
Max. total allocated space (usmblks): 0
|
|
|
|
Free bytes held in fastbins (fsmblks): 0
|
|
|
|
Total allocated space (uordblks): 0
|
|
|
|
Total free space (fordblks): 0
|
|
|
|
Topmost releasable block (keepcost): 0
|
|
|
|
|
|
|
|
============== After allocating blocks ==============
|
|
|
|
Total non\-mmapped bytes (arena): 135168
|
|
|
|
# of free chunks (ordblks): 1
|
|
|
|
# of free fastbin blocks (smblks): 0
|
|
|
|
# of mapped regions (hblks): 0
|
|
|
|
Bytes in mapped regions (hblkhd): 0
|
|
|
|
Max. total allocated space (usmblks): 0
|
|
|
|
Free bytes held in fastbins (fsmblks): 0
|
|
|
|
Total allocated space (uordblks): 104000
|
|
|
|
Total free space (fordblks): 31168
|
|
|
|
Topmost releasable block (keepcost): 31168
|
|
|
|
|
|
|
|
============== After freeing blocks ==============
|
|
|
|
Total non\-mmapped bytes (arena): 135168
|
|
|
|
# of free chunks (ordblks): 501
|
|
|
|
# of free fastbin blocks (smblks): 0
|
|
|
|
# of mapped regions (hblks): 0
|
|
|
|
Bytes in mapped regions (hblkhd): 0
|
|
|
|
Max. total allocated space (usmblks): 0
|
|
|
|
Free bytes held in fastbins (fsmblks): 0
|
|
|
|
Total allocated space (uordblks): 52000
|
|
|
|
Total free space (fordblks): 83168
|
|
|
|
Topmost releasable block (keepcost): 31168
|
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:52:46 +00:00
|
|
|
.EE
|
2011-09-19 15:14:30 +00:00
|
|
|
.in
|
|
|
|
.SS Program source
|
|
|
|
\&
|
memusage.1, clone.2, eventfd.2, futex.2, getdents.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, keyctl.2, mmap.2, mprotect.2, msgop.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, setns.2, tee.2, timer_create.2, timerfd_create.2, unshare.2, userfaultfd.2, wait.2, __ppc_get_timebase.3, backtrace.3, bswap.3, clock_getcpuclockid.3, dl_iterate_phdr.3, dlinfo.3, dlopen.3, duplocale.3, end.3, endian.3, fmemopen.3, fopencookie.3, frexp.3, ftw.3, getdate.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, mq_getattr.3, mq_notify.3, newlocale.3, offsetof.3, posix_spawn.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, scandir.3, sem_wait.3, strcat.3, strftime.3, strtok.3, strtol.3, strverscmp.3, loop.4, core.5, aio.7, fanotify.7, feature_test_macros.7, inotify.7, pkeys.7, unix.7, user_namespaces.7: Use .EX/.EE for EXAMPLE programs
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 08:44:33 +00:00
|
|
|
.EX
|
2011-09-19 15:14:30 +00:00
|
|
|
#include <malloc.h>
|
2017-10-03 16:06:22 +00:00
|
|
|
#include <stdlib.h>
|
|
|
|
#include <string.h>
|
2011-09-19 15:14:30 +00:00
|
|
|
|
|
|
|
static void
|
|
|
|
display_mallinfo(void)
|
|
|
|
{
|
|
|
|
struct mallinfo mi;
|
|
|
|
|
|
|
|
mi = mallinfo();
|
|
|
|
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("Total non\-mmapped bytes (arena): %d\en", mi.arena);
|
|
|
|
printf("# of free chunks (ordblks): %d\en", mi.ordblks);
|
|
|
|
printf("# of free fastbin blocks (smblks): %d\en", mi.smblks);
|
|
|
|
printf("# of mapped regions (hblks): %d\en", mi.hblks);
|
|
|
|
printf("Bytes in mapped regions (hblkhd): %d\en", mi.hblkhd);
|
|
|
|
printf("Max. total allocated space (usmblks): %d\en", mi.usmblks);
|
|
|
|
printf("Free bytes held in fastbins (fsmblks): %d\en", mi.fsmblks);
|
|
|
|
printf("Total allocated space (uordblks): %d\en", mi.uordblks);
|
|
|
|
printf("Total free space (fordblks): %d\en", mi.fordblks);
|
|
|
|
printf("Topmost releasable block (keepcost): %d\en", mi.keepcost);
|
2011-09-19 15:14:30 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
main(int argc, char *argv[])
|
|
|
|
{
|
|
|
|
#define MAX_ALLOCS 2000000
|
|
|
|
char *alloc[MAX_ALLOCS];
|
|
|
|
int numBlocks, j, freeBegin, freeEnd, freeStep;
|
|
|
|
size_t blockSize;
|
|
|
|
|
2017-10-03 16:06:22 +00:00
|
|
|
if (argc < 3 || strcmp(argv[1], "\-\-help") == 0) {
|
|
|
|
fprintf(stderr, "%s num\-blocks block\-size [free\-step "
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
"[start\-free [end\-free]]]\en", argv[0]);
|
2017-10-03 16:06:22 +00:00
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
2011-09-19 15:14:30 +00:00
|
|
|
|
|
|
|
numBlocks = atoi(argv[1]);
|
|
|
|
blockSize = atoi(argv[2]);
|
|
|
|
freeStep = (argc > 3) ? atoi(argv[3]) : 1;
|
|
|
|
freeBegin = (argc > 4) ? atoi(argv[4]) : 0;
|
|
|
|
freeEnd = (argc > 5) ? atoi(argv[5]) : numBlocks;
|
|
|
|
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("============== Before allocating blocks ==============\en");
|
2011-09-19 15:14:30 +00:00
|
|
|
display_mallinfo();
|
|
|
|
|
|
|
|
for (j = 0; j < numBlocks; j++) {
|
2017-10-03 16:06:22 +00:00
|
|
|
if (numBlocks >= MAX_ALLOCS) {
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
fprintf(stderr, "Too many allocations\en");
|
2017-10-03 16:06:22 +00:00
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
2011-09-19 15:14:30 +00:00
|
|
|
|
|
|
|
alloc[j] = malloc(blockSize);
|
2017-10-03 16:06:22 +00:00
|
|
|
if (alloc[j] == NULL) {
|
|
|
|
perror("malloc");
|
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
2011-09-19 15:14:30 +00:00
|
|
|
}
|
|
|
|
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("\en============== After allocating blocks ==============\en");
|
2011-09-19 15:14:30 +00:00
|
|
|
display_mallinfo();
|
|
|
|
|
|
|
|
for (j = freeBegin; j < freeEnd; j += freeStep)
|
|
|
|
free(alloc[j]);
|
|
|
|
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("\en============== After freeing blocks ==============\en");
|
2011-09-19 15:14:30 +00:00
|
|
|
display_mallinfo();
|
|
|
|
|
|
|
|
exit(EXIT_SUCCESS);
|
|
|
|
}
|
memusage.1, clone.2, eventfd.2, futex.2, getdents.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, keyctl.2, mmap.2, mprotect.2, msgop.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, setns.2, tee.2, timer_create.2, timerfd_create.2, unshare.2, userfaultfd.2, wait.2, __ppc_get_timebase.3, backtrace.3, bswap.3, clock_getcpuclockid.3, dl_iterate_phdr.3, dlinfo.3, dlopen.3, duplocale.3, end.3, endian.3, fmemopen.3, fopencookie.3, frexp.3, ftw.3, getdate.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, mq_getattr.3, mq_notify.3, newlocale.3, offsetof.3, posix_spawn.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, scandir.3, sem_wait.3, strcat.3, strftime.3, strtok.3, strtol.3, strverscmp.3, loop.4, core.5, aio.7, fanotify.7, feature_test_macros.7, inotify.7, pkeys.7, unix.7, user_namespaces.7: Use .EX/.EE for EXAMPLE programs
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 08:44:33 +00:00
|
|
|
.EE
|
2011-09-19 15:14:30 +00:00
|
|
|
.SH SEE ALSO
|
|
|
|
.ad l
|
|
|
|
.nh
|
|
|
|
.BR mmap (2),
|
|
|
|
.BR malloc (3),
|
2012-03-08 21:15:58 +00:00
|
|
|
.BR malloc_info (3),
|
2011-09-19 15:14:30 +00:00
|
|
|
.BR malloc_stats (3),
|
|
|
|
.BR malloc_trim (3),
|
|
|
|
.BR mallopt (3)
|