mirror of https://github.com/tLDP/LDP
fix minor typos in Optical-Disk-HOWTO.sgml
This commit is contained in:
parent
a1facdb035
commit
431fc3453b
|
@ -364,7 +364,7 @@ SCSI interface.
|
||||||
Drives used: several, no problems encountered (Olympus, Epson, currently
|
Drives used: several, no problems encountered (Olympus, Epson, currently
|
||||||
Mitsubishi MK230LK3). Drives may have strange jumper setting like "Mac
|
Mitsubishi MK230LK3). Drives may have strange jumper setting like "Mac
|
||||||
Mode" or such - naturally, disable.
|
Mode" or such - naturally, disable.
|
||||||
If you decide to get a drive, pay attention the the
|
If you decide to get a drive, pay attention to the
|
||||||
cache size - It can speed things up enormously, still speed will be
|
cache size - It can speed things up enormously, still speed will be
|
||||||
soso compared to hard disks, of course.
|
soso compared to hard disks, of course.
|
||||||
|
|
||||||
|
@ -1567,7 +1567,7 @@ Alexander Voropay
|
||||||
<p>
|
<p>
|
||||||
I have no experience with optical jukeboxes with Linux!!!!
|
I have no experience with optical jukeboxes with Linux!!!!
|
||||||
I have had experiences with Optical jukeboxes under HP-UX. In this
|
I have had experiences with Optical jukeboxes under HP-UX. In this
|
||||||
setup the the jukebox had a SCSI address of it's own. Each slot in
|
setup the jukebox had a SCSI address of it's own. Each slot in
|
||||||
the jukebox had an associated LUN number. A device name was assigned
|
the jukebox had an associated LUN number. A device name was assigned
|
||||||
for each disk slot A side and B side. The mount command was run against
|
for each disk slot A side and B side. The mount command was run against
|
||||||
the appropriate device name. I had a jukebox with just one drive and
|
the appropriate device name. I had a jukebox with just one drive and
|
||||||
|
@ -2097,7 +2097,7 @@ I tried Jeff's suggestion. Here are the steps I performed;
|
||||||
<item>Modify my kernel using "make xconfig" in the /usr/src/linux directory
|
<item>Modify my kernel using "make xconfig" in the /usr/src/linux directory
|
||||||
and installed it.
|
and installed it.
|
||||||
<item>Change the mode jumper on the PD drive to non-DOS mode. I soldered
|
<item>Change the mode jumper on the PD drive to non-DOS mode. I soldered
|
||||||
a switch across the mode jumper connections and routed it the the
|
a switch across the mode jumper connections and routed it to the
|
||||||
back panel. I figured out which switch position was the open position
|
back panel. I figured out which switch position was the open position
|
||||||
and labeled this one for DOS. The other position is of course Linux.
|
and labeled this one for DOS. The other position is of course Linux.
|
||||||
So before I boot my system I decide which OS I'll be using and set the
|
So before I boot my system I decide which OS I'll be using and set the
|
||||||
|
|
Loading…
Reference in New Issue