LDP
/
LDP
mirror of https://github.com/tLDP/LDP
0
1
Fork 0
Code Releases Activity

typo

This commit is contained in:
tille 2006-07-27 08:05:33 +00:00
parent e63a5bd37b
commit 234c91693c
2 changed files with 2 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
LDP/guide/docbook/Intro-Linux/chap11.xml
View File

@ -16,8 +16,7 @@
<para>Most likely, your system is already installed with audio drivers and the configuration was done at installation time. Likewise, should you ever need to replace your audio hardware, most systems provide tools that allow easy setup and configuration of the device. Most currently available
plug-and-play sound cards should be recognized automatically. If you can hear the samples that are played during configuration, just click <guibutton>OK</guibutton>
and everything will be set up for you.</para>
<para>If your card is not detected automatically, you may be presented with a list of sound cards and/or of sound card properties from which to choose. After that, you will have to provide the correct I/O port, IRQ and DMA settings. Information about these settings can be found in your sound card documentation. If you are on a dual boot system with MS Windows, this information can be found in t
he Windows Control Panel as well.</para>
<para>If your card is not detected automatically, you may be presented with a list of sound cards and/or of sound card properties from which to choose. After that, you will have to provide the correct I/O port, IRQ and DMA settings. Information about these settings can be found in your sound card documentation. If you are on a dual boot system with MS Windows, this information can be found in the Windows Control Panel as well.</para>
<note><title>If automatic sound card detection fails</title>
<para>
If your soundcard is not supported by default, you will need to apply other techniques. These are described in the <ulink url="http://www.tldp.org/HOWTO/Sound-HOWTO/index.html">Linux Sound HOWTO</ulink>.</para>

2
LDP/guide/docbook/Intro-Linux/chap2.xml
View File

@ -94,7 +94,7 @@ blast login: _
<para>Logging out is done by entering the <command>logout</command> command, followed by <keycap>Enter</keycap>. You are successfully disconnected from the system when you see the login screen again.</para>
<caution><title>The power button</title>
<para>While Linux was not meant to be shut off without application of the proper procedures for halting the system, hitting the power button is equivalent to starting those procedures <emphasis>on newer systems</emphasis>. Ihowever, powering off an old system without going through the halting process might cause severe damage! If you want to be sure, always use the <menuchoice><guimenu>Shut down</guimenu></menuchoice> option when you log out from the graphical interface, or, when on the login screen (where you have to give your user name and password) look around for a shutdown button.</para></caution>
<para>While Linux was not meant to be shut off without application of the proper procedures for halting the system, hitting the power button is equivalent to starting those procedures <emphasis>on newer systems</emphasis>. However, powering off an old system without going through the halting process might cause severe damage! If you want to be sure, always use the <menuchoice><guimenu>Shut down</guimenu></menuchoice> option when you log out from the graphical interface, or, when on the login screen (where you have to give your user name and password) look around for a shutdown button.</para></caution>
<para>Now that we know how to connect to and disconnect from the system, we're ready for our first commands.</para>
</sect2>