.\" Hey Emacs! This file is -*- nroff -*- source. .\" .\" Copyright (c) 1992 Drew Eckhardt , March 28, 1992 .\" and Copyright (c) Michael Kerrisk, 2001, 2002, 2005 .\" May be distributed under the GNU General Public License. .\" Modified by Michael Haardt .\" Modified 24 Jul 1993 by Rik Faith .\" Modified 21 Aug 1994 by Michael Chastain : .\" New man page (copied from 'fork.2'). .\" Modified 10 June 1995 by Andries Brouwer .\" Modified 25 April 1998 by Xavier Leroy .\" Modified 26 Jun 2001 by Michael Kerrisk .\" Mostly upgraded to 2.4.x .\" Added prototype for sys_clone() plus description .\" Added CLONE_THREAD with a brief description of thread groups .\" Added CLONE_PARENT and revised entire page remove ambiguity .\" between "calling process" and "parent process" .\" Added CLONE_PTRACE and CLONE_VFORK .\" Added EPERM and EINVAL error codes .\" Renamed "__clone" to "clone" (which is the prototype in ) .\" various other minor tidy ups and clarifications. .\" Modified 26 Jun 2001 by Michael Kerrisk .\" Updated notes for 2.4.7+ behaviour of CLONE_THREAD .\" Modified 15 Oct 2002 by Michael Kerrisk .\" Added description for CLONE_NEWNS, which was added in 2.4.19 .\" Slightly rephrased, aeb. .\" Modified 1 Feb 2003 - added CLONE_SIGHAND restriction, aeb. .\" Modified 1 Jan 2004 - various updates, aeb .\" Modified 2004-09-10 - added CLONE_PARENT_SETTID etc - aeb. .\" 2005-04-12, mtk, noted the PID caching behaviour of NPTL's getpid() .\" wrapper under BUGS. .\" 2005-05-10, mtk, added CLONE_SYSVSEM, CLONE_UNTRACED, CLONE_STOPPED. .\" 2005-05-17, mtk, Substantially enhanced discussion of CLONE_THREAD. .\" .TH CLONE 2 2005-05-17 "Linux 2.6" "Linux Programmer's Manual" .SH NAME clone \- create a child process .SH SYNOPSIS .nf .B #include .BI "int clone(int (*" "fn" ")(void *), void *" child_stack , .BI " int " flags ", void *" "arg" ", ... " .BI " /* pid_t *" pid ", struct user_desc *" tls \ ", pid_t *" ctid " */ );" .BI "_syscall2(int, " clone ", int, " flags ", void *, " child_stack ) .BI "_syscall5(int, " clone ", int, " flags ", void *, " child_stack , .BI " int *, " parent_tidptr ", struct user_desc *, " newtls , .BI " int *, " child_tidptr ) /* Using \fBsyscall\fP(2) may be preferable; see \fBintro\fP(2) */ .fi .SH DESCRIPTION .BR clone () creates a new process, in a manner similar to .BR fork (2). .BR clone () is a library function layered on top of the underlying .BR clone () system call, hereinafter referred to as .BR sys_clone . A description of .BR sys_clone is given towards the end of this page. Unlike .BR fork (2), these calls allow the child process to share parts of its execution context with the calling process, such as the memory space, the table of file descriptors, and the table of signal handlers. (Note that on this manual page, "calling process" normally corresponds to "parent process". But see the description of .B CLONE_PARENT below.) The main use of .BR clone () is to implement threads: multiple threads of control in a program that run concurrently in a shared memory space. When the child process is created with .BR clone (), it executes the function application .IR fn ( arg ). (This differs from .BR fork (2), where execution continues in the child from the point of the .BR fork (2) call.) The .I fn argument is a pointer to a function that is called by the child process at the beginning of its execution. The .I arg argument is passed to the .I fn function. When the .IR fn ( arg ) function application returns, the child process terminates. The integer returned by .I fn is the exit code for the child process. The child process may also terminate explicitly by calling .BR exit (2) or after receiving a fatal signal. The .I child_stack argument specifies the location of the stack used by the child process. Since the child and calling process may share memory, it is not possible for the child process to execute in the same stack as the calling process. The calling process must therefore set up memory space for the child stack and pass a pointer to this space to .BR clone (). Stacks grow downwards on all processors that run Linux (except the HP PA processors), so .I child_stack usually points to the topmost address of the memory space set up for the child stack. The low byte of .I flags contains the number of the .I "termination signal" sent to the parent when the child dies. If this signal is specified as anything other than .BR SIGCHLD , then the parent process must specify the .B __WALL or .B __WCLONE options when waiting for the child with .BR wait (2). If no signal is specified, then the parent process is not signaled when the child terminates. .I flags may also be bitwise-or'ed with zero or more of the following constants, in order to specify what is shared between the calling process and the child process: .TP .BR CLONE_PARENT " (since Linux 2.3.12)" If .B CLONE_PARENT is set, then the parent of the new child (as returned by .BR getppid (2)) will be the same as that of the calling process. If .B CLONE_PARENT is not set, then (as with .BR fork (2)) the child's parent is the calling process. Note that it is the parent process, as returned by .BR getppid (2), which is signaled when the child terminates, so that if .B CLONE_PARENT is set, then the parent of the calling process, rather than the calling process itself, will be signaled. .TP .B CLONE_FS If .B CLONE_FS is set, the caller and the child processes share the same file system information. This includes the root of the file system, the current working directory, and the umask. Any call to .BR chroot (2), .BR chdir (2), or .BR umask (2) performed by the calling process or the child process also affects the other process. If .B CLONE_FS is not set, the child process works on a copy of the file system information of the calling process at the time of the .BR clone () call. Calls to .BR chroot (2), .BR chdir (2), .BR umask (2) performed later by one of the processes do not affect the other process. .TP .B CLONE_FILES If .B CLONE_FILES is set, the calling process and the child processes share the same file descriptor table. Any file descriptor created by the calling process or by the child process is also valid in the other process. Similarly, if one of the processes closes a file descriptor, or changes its associated flags (using the .BR fcntl (2) .B F_SETFD operation), the other process is also affected. If .B CLONE_FILES is not set, the child process inherits a copy of all file descriptors opened in the calling process at the time of .BR clone (). (The duplicated file descriptors in the child refer to the same open file descriptions (see .BR open (2)) as the corresponding file descriptors in the calling process.) Subsequent operations that open or close file descriptors, or change file descriptor flags, performed by either the calling process or the child process do not affect the other process. .TP .BR CLONE_NEWNS " (since Linux 2.4.19)" Start the child in a new namespace. Every process lives in a namespace. The .I namespace of a process is the data (the set of mounts) describing the file hierarchy as seen by that process. After a .BR fork (2) or .BR clone (2) where the .B CLONE_NEWNS flag is not set, the child lives in the same namespace as the parent. The system calls .BR mount (2) and .BR umount (2) change the namespace of the calling process, and hence affect all processes that live in the same namespace, but do not affect processes in a different namespace. After a .BR clone (2) where the .B CLONE_NEWNS flag is set, the cloned child is started in a new namespace, initialized with a copy of the namespace of the parent. Only a privileged process (one having the CAP_SYS_ADMIN capability) may specify the .B CLONE_NEWNS flag. It is not permitted to specify both .B CLONE_NEWNS and .B CLONE_FS in the same .BR clone () call. .TP .B CLONE_SIGHAND If .B CLONE_SIGHAND is set, the calling process and the child processes share the same table of signal handlers. If the calling process or child process calls .BR sigaction (2) to change the behavior associated with a signal, the behavior is changed in the other process as well. However, the calling process and child processes still have distinct signal masks and sets of pending signals. So, one of them may block or unblock some signals using .BR sigprocmask (2) without affecting the other process. If .B CLONE_SIGHAND is not set, the child process inherits a copy of the signal handlers of the calling process at the time .BR clone () is called. Calls to .BR sigaction (2) performed later by one of the processes have no effect on the other process. Since Linux 2.6.0-test6, .I flags must also include .B CLONE_VM if .B CLONE_SIGHAND is specified .TP .B CLONE_PTRACE If .B CLONE_PTRACE is specified, and the calling process is being traced, then trace the child also (see .BR ptrace (2)). .TP .BR CLONE_UNTRACED " (since Linux 2.5.46)" If .B CLONE_UNTRACED is specified, then a tracing process cannot force .B CLONE_PTRACE on this child process. .TP .BR CLONE_STOPPED " (since Linux 2.6.0-test2)" If .B CLONE_STOPPED is set, then the child is initially stopped (as though it was sent a .B SIGSTOP signal), and must be resumed by sending it a .B SIGCONT signal. .TP .B CLONE_VFORK If .B CLONE_VFORK is set, the execution of the calling process is suspended until the child releases its virtual memory resources via a call to .BR execve (2) or .BR _exit (2) (as with .BR vfork (2)). If .B CLONE_VFORK is not set then both the calling process and the child are schedulable after the call, and an application should not rely on execution occurring in any particular order. .TP .B CLONE_VM If .B CLONE_VM is set, the calling process and the child processes run in the same memory space. In particular, memory writes performed by the calling process or by the child process are also visible in the other process. Moreover, any memory mapping or unmapping performed with .BR mmap (2) or .BR munmap (2) by the child or calling process also affects the other process. If .B CLONE_VM is not set, the child process runs in a separate copy of the memory space of the calling process at the time of .BR clone (). Memory writes or file mappings/unmappings performed by one of the processes do not affect the other, as with .BR fork (2). .TP .BR CLONE_PID " (obsolete)" If .B CLONE_PID is set, the child process is created with the same process ID as the calling process. This is good for hacking the system, but otherwise of not much use. Since 2.3.21 this flag can be specified only by the system boot process (PID 0). It disappeared in Linux 2.5.16. .TP .BR CLONE_THREAD " (since Linux 2.4.0-test8)" If .B CLONE_THREAD is set, the child is placed in the same thread group as the calling process. To make the remainder of the discussion of .B CLONE_THREAD more readable, the term "thread" is used to refer to the processes within a thread group. Thread groups were a feature added in Linux 2.4 to support the POSIX threads notion of a set of threads that share a single PID. Internally, this shared PID is the so-called thread group identifier (TGID) for the thread group. Since Linux 2.4, calls to .BR getpid (2) return the TGID of the caller. The threads within a group can be distinguished by their (system-wide) unique thread IDs (TID). A new thread's TID is available as the function result returned to the caller of .BR clone (), and a thread can obtain its own TID using .BR gettid (2). When a call is made to .BR clone () without specifying .BR CLONE_THREAD , then the resulting thread is placed in a new thread group whose TGID is the same as the thread's TID. This thread is the .I leader of the new thread group. A new thread created with .B CLONE_THREAD has the same parent process as the caller of .BR clone () (i.e., like .BR CLONE_PARENT ), so that calls to .BR getppid (2) return the same value for all of the threads in a thread group. When a .B CLONE_THREAD thread terminates, the thread that created it using .BR clone () is not sent a .B SIGCHLD (or other termination) signal; nor can the status of such a thread be obtained using .BR wait (2). (The thread is said to be .IR detached .) After all of the threads in a thread group terminate the parent process of the thread group is sent a .B SIGCHLD (or other termination) signal. If any of the threads in a thread group performs an .BR execve (2), then all threads other than the thread group leader are terminated, and the new program is executed in the thread group leader. If one of the threads in a thread group creates a child using .BR fork (2), then any thread in the group can .BR wait (2) for that child. Since Linux 2.5.35, .I flags must also include .B CLONE_SIGHAND if .B CLONE_THREAD is specified. Signals may be sent to a thread group as a whole (i.e., a TGID) using .BR kill (2), or to a specific thread (i.e., TID) using .BR tgkill (2). Signal dispositions and actions are process-wide: if an unhandled signal is delivered to a thread, then it will affect (terminate, stop, continue, be ignored in) all members of the thread group. Each thread has its own signal mask, as set by .BR sigprocmask (2), but signals can be pending either: for the whole process (i.e., deliverable to any member of the thread group), when sent with .BR kill (2); or for an individual thread, when sent with .BR tgkill (2). A call to .BR sigpending (2) returns a signal set that is the union of the signals pending for the whole process and the signals that are pending for the calling thread. If .BR kill (2) is used to send a signal to a thread group, and the thread group has installed a handler for the signal, then the handler will be invoked in exactly one, arbitrarily selected member of the thread group that has not blocked the signal. If multiple threads in a group are waiting to accept the same signal using .BR sigwaitinfo (2), the kernel will arbitrarily select one of these threads to receive a signal sent using .BR kill (2). .TP .BR CLONE_SYSVSEM " (since Linux 2.5.10)" If .B CLONE_SYSVSEM is set, then the child and the calling process share a single list of System V semaphore undo values (see .BR semop (2)). If this flag is not set, then the child has a separate undo list, which is initially empty. .TP .BR CLONE_SETTLS " (since Linux 2.5.32)" The .I newtls parameter is the new TLS (Thread Local Storage) descriptor. (See .BR set_thread_area (2).) .TP .BR CLONE_PARENT_SETTID " (since Linux 2.5.49)" Store child thread ID at location .I parent_tidptr in parent and child memory. (In Linux 2.5.32-2.5.48 there was a flag CLONE_SETTID that did this.) .TP .BR CLONE_CHILD_SETTID " (since Linux 2.5.49)" Store child thread ID at location .I child_tidptr in child memory. .TP .BR CLONE_CHILD_CLEARTID " (since Linux 2.5.49)" Erase child thread ID at location .I child_tidptr in child memory when the child exits, and do a wakeup on the futex at that address. The address involved may be changed by the .BR set_tid_address (2) system call. This is used by threading libraries. .SS "sys_clone" The .B sys_clone system call corresponds more closely to .BR fork (2) in that execution in the child continues from the point of the call. Thus, .B sys_clone only requires the .I flags and .I child_stack arguments, which have the same meaning as for .BR clone (). (Note that the order of these arguments differs from .BR clone ().) Another difference for .B sys_clone is that the .I child_stack argument may be zero, in which case copy-on-write semantics ensure that the child gets separate copies of stack pages when either process modifies the stack. In this case, for correct operation, the .B CLONE_VM option should not be specified. Since Linux 2.5.49 the system call has five parameters. The two new parameters are .I parent_tidptr which points to the location (in parent and child memory) where the child thread ID will be written in case CLONE_PARENT_SETTID was specified, and .I child_tidptr which points to the location (in child memory) where the child thread ID will be written in case CLONE_CHILD_SETTID was specified. .SH "RETURN VALUE" .\" gettid() returns current->pid; .\" getpid() returns current->tgid; On success, the thread ID of the child process is returned in the caller's thread of execution. On failure, a \-1 will be returned in the caller's context, no child process will be created, and .I errno will be set appropriately. .SH ERRORS .TP .B EAGAIN Too many processes are already running. .TP .B EINVAL .B CLONE_SIGHAND was specified, but .B CLONE_VM was not. (Since Linux 2.6.0-test6.) .TP .B EINVAL .B CLONE_THREAD was specified, but .B CLONE_SIGHAND was not. (Since Linux 2.5.35.) .\" .TP .\" .B EINVAL .\" Precisely one of .\" .B CLONE_DETACHED .\" and .\" .B CLONE_THREAD .\" was specified. (Since Linux 2.6.0-test6.) .TP .B EINVAL Both .B CLONE_FS and .B CLONE_NEWNS were specified in .IR flags . .TP .B EINVAL Returned by .BR clone () when a zero value is specified for .IR child_stack . .TP .B ENOMEM Cannot allocate sufficient memory to allocate a task structure for the child, or to copy those parts of the caller's context that need to be copied. .TP .B EPERM .B CLONE_NEWNS was specified by a non-root process (process without CAP_SYS_ADMIN). .TP .B EPERM .B CLONE_PID was specified by a process other than process 0. .SH AVAILABILITY There is no entry for .BR clone () in libc5. glibc2 provides .BR clone () as described in this manual page. .SH NOTES In the kernel 2.4.x series, .B CLONE_THREAD generally does not make the parent of the new thread the same as the parent of the calling process. However, for kernel versions 2.4.7 to 2.4.18 the .B CLONE_THREAD flag implied the .B CLONE_PARENT flag (as in kernel 2.6). For a while there was .B CLONE_DETACHED (introduced in 2.5.32): parent wants no child-exit signal. In 2.6.2 the need to give this together with .B CLONE_THREAD disappeared. This flag is still defined, but has no effect. On x86, .BR clone () should not be called through vsyscall, but directly through .IR "int $0x80" . On IA-64, a different system call is used: .nf .BI "int clone2(int (*" "fn" ")(void *), " .BI " void *" child_stack_base ", size_t " stack_size , .BI " int " flags ", void *" "arg" ", ... " .BI " /* pid_t *" pid ", struct user_desc *" tls \ ", pid_t *" ctid " */ );" .fi .PP The .BR clone2 () system call operates in the same way as .BR clone (), except that .I child_stack_base points to the lowest address of the child's stack area, and .I stack_size specifies the size of the stack pointed to by .IR child_stack_base . .SH "CONFORMING TO" The .BR clone () and .B sys_clone calls are Linux specific and should not be used in programs intended to be portable. .SH BUGS Versions of the GNU C library that include the NPTL threading library contain a wrapper function for .BR getpid () that performs caching of PIDs. In programs linked against such libraries, calls to .BR getpid () may return the same value, even when the threads were not created using .B CLONE_THREAD (and thus are not in the same thread group). To get the truth, it may be necessary to use code such as the following .nf #include pid_t mypid; mypid = syscall(SYS_getpid); .fi .SH "SEE ALSO" .BR fork (2), .BR futex (2), .BR getpid (2), .BR gettid (2), .BR set_thread_area (2), .BR set_tid_address (2), .BR tkill (2), .BR unshare (2), .BR wait (2), .BR capabilities (7), .BR pthreads (7)