prctls that are architecture-specific won't work on other
architectures, and arch-specific prctls that manipulate optional
hardware features likewise won't work if that hardware feature is
not present.
The established pattern seems to be to treat such prctls as if they
are unimplemented, when attempted on the wrong hardware.
Cover these cases with some generic weasel words in the closet
existing EINVAL clause.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Fix a few very minor bits of punctuation in
PR_SET_SPECULATION_CTRL and PR_GET_SPECULATION_CTRL.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
The description of PR_SET_PDEATHSIG refers to "maxsig", which
is apparently intended to stand for the maximum defined signal
number.
maxsig seems not to be a thing, even in the kernel.
Reword to use the standard constant NSIG. (Discussion of SIGRTMIN
and SIGRTMAX seems out of scope here, and anyway is not relevant
to the kernel.)
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
The Intel MPX API was removed from Linux 5.4. See Linux
commit f240652b6032 ("x86/mpx: Remove MPX APIs")
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
The prctl list has historically been sorted by prctl name (ignoring
any SET_ or GET_ prefix) to make individual prctls easier to find.
Some noise seems to have crept in since.
Sort the list back into order. Similarly, reorder the list of
prctls specified to return non-zero values on success.
Content movement only. No semantic change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
The prctl.2 source is unnecessarily hard to navigate, not least
because prctl option flags are traditionally named PR_* and so look
just like prctl names.
For each actual prctl, add a comment of the form
.\" prctl PR_FOO
to make it move obvious where each top-level prctl starts.
Of course, we could add some clever macros, but let's not confuse
dumb parsers.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
In reality, almost every prctl interferes with assumptions that the
compiler and C library / runtime rely on. prctl() can therefore
make userspace explode in a variety ways that are likely to be hard
to debug.
This is not obvious to the uninitiated, so add a warning.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Under PR_SET_NAME, the [tid] value seen in procfs as
/proc/self/task/[tid] is mistakenly described as the name of the
thread, whereas really the name is on /proc/self/task/[tid]/comm.
Fix it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
The current synopsis for prctl(2) misleadingly claims that prctl
operates on a process. Rather, some (in fact, most) prctls operate
on a thread.
The wording probably dates back to the old days when Linux didn't
really have threads at all.
Reword as appropriate.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
This patch documents the PR_SET_IO_FLUSHER and PR_GET_IO_FLUSHER
prctl commands added to the linux kernel for 5.6 in commit:
commit 8d19f1c8e1937baf74e1962aae9f90fa3aeab463
Author: Mike Christie <mchristi@redhat.com>
Date: Mon Nov 11 18:19:00 2019 -0600
prctl: PR_{G,S}ET_IO_FLUSHER to support controlling memory reclaim
Reviewed-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
In kernel/sys.c, arg2 is an unsigned long value and it will never
less than 0. Also, since kernel commit id da8b44d5a9f8 (Linux
4.6), timer_slack_ns and default timer_slack_ns have been
converted into u64, the return value of PR_GET_TIMERSLACK has been
limited under ULONG_MAX.
The timer slack value also can be inherited by a child created via
fork(2).
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
To test the behavior documented by this patch, the following
demos employ the program shown at the foot of this commit message.
First, show that the pdeath signal is sent when the parent
terminates:
$ ./pdeath_signal 0 10 4
Parent (18595) about to sleep for 4 seconds
Child about to set PR_SET_PDEATHSIG
Child about to sleep
Parent (18595) terminating
*********** Child (18596) got signal; si_pid = 18595; si_uid = 1000
Parent PID is now 1403
$ Child about to exit
But the signal is not sent if the parent terminates before the
child uses PR_SET_PDEATHSIG:
$ ./pdeath_signal 2 10 0
Parent (18707) about to sleep for 0 seconds
Parent (18707) terminating
Child about to sleep 2 seconds before setting PR_SET_PDEATHSIG
$ Child about to set PR_SET_PDEATHSIG
Child about to sleep
Child about to exit
Demonstrate that the pdeath signal is sent on termination of each
ancestor subreaper process:
$ ./pdeath_signal 2 10 3 7 6 5
18786 marked itself as a subreaper
18786 subreaper about to sleep 7 seconds
18787 marked itself as a subreaper
18787 subreaper about to sleep 6 seconds
18788 marked itself as a subreaper
18788 subreaper about to sleep 5 seconds
Parent (18789) about to sleep for 3 seconds
Child about to sleep 2 seconds before setting PR_SET_PDEATHSIG
Child about to set PR_SET_PDEATHSIG
Child about to sleep
Parent (18789) terminating
*********** Child (18790) got signal; si_pid = 18789; si_uid = 1000
Parent PID is now 18788
18788 subreaper about to terminate
*********** Child (18790) got signal; si_pid = 18788; si_uid = 1000
Parent PID is now 18787
18787 subreaper about to terminate
*********** Child (18790) got signal; si_pid = 18787; si_uid = 1000
Parent PID is now 18786
18786 subreaper about to terminate
*********** Child (18790) got signal; si_pid = 18786; si_uid = 1000
Parent PID is now 1403
$ Child about to exit
But in the case where some subreapers terminate before they
have a chance to adopt the child, the terminations of those
subreapers do not result in a signal for the child:
$ ./pdeath_signal 2 10 3 5 6 7
18836 marked itself as a subreaper
18836 subreaper about to sleep 5 seconds
18837 marked itself as a subreaper
18837 subreaper about to sleep 6 seconds
18838 marked itself as a subreaper
18838 subreaper about to sleep 7 seconds
Parent (18839) about to sleep for 3 seconds
Child about to sleep 2 seconds before setting PR_SET_PDEATHSIG
Child about to set PR_SET_PDEATHSIG
Child about to sleep
Parent (18839) terminating
*********** Child (18840) got signal; si_pid = 18839; si_uid = 1000
Parent PID is now 18838
18836 subreaper about to terminate
$ 18837 subreaper about to terminate
18838 subreaper about to terminate
*********** Child (18840) got signal; si_pid = 18838; si_uid = 1000
Parent PID is now 1403
Child about to exit
============================
/* pdeath_signal.c */
} while (0)
static void
handler(int sig, siginfo_t *si, void *ucontext)
{
printf("*********** Child (%ld) got signal; si_pid = %d; si_uid = %d\n",
(long) getpid(), si->si_pid, si->si_uid);
printf(" Parent PID is now %ld\n", (long) getppid());
}
int
main(int argc, char *argv[])
{
struct sigaction sa;
int childPreSleep, childPostSleep, parentSleep;
if (argc < 2) {
fprintf(stderr, "Usage: %s child-pre-sleep "
"[child-post-sleep [parent-sleep [subreaper-sleep...]]]\n",
argv[0]);
exit(EXIT_FAILURE);
}
childPreSleep = atoi(argv[1]);
if (argc > 2)
childPostSleep = atoi(argv[2]);
if (argc > 3)
parentSleep = atoi(argv[3]);
/* Optionally create a series of subreapers */
if (argc > 4) {
for (int sr = 4; sr < argc; sr++) {
if (prctl(PR_SET_CHILD_SUBREAPER, 1) == -1)
errExit("prctl");
printf("%ld marked itself as a subreaper\n", (long) getpid());
switch (fork()) {
case -1:
errExit("fork");
case 0:
break;
default:
printf("%ld subreaper about to sleep %s seconds\n",
(long) getpid(), argv[sr]);
sleep(atoi(argv[sr]));
printf("%ld subreaper about to terminate\n", (long) getpid());
exit(EXIT_SUCCESS);
}
}
}
switch (fork()) {
case -1:
errExit("fork");
case 0:
sa.sa_flags = SA_SIGINFO;
sigemptyset(&sa.sa_mask);
sa.sa_sigaction = handler;
if (sigaction(SIGUSR1, &sa, NULL) == -1)
errExit("sigaction");
if (childPreSleep > 0) {
printf("Child about to sleep %d seconds before setting "
"PR_SET_PDEATHSIG\n", childPreSleep);
sleep(childPreSleep);
}
printf("Child about to set PR_SET_PDEATHSIG\n");
if (prctl(PR_SET_PDEATHSIG, SIGUSR1) == -1)
errExit("prctl");
printf("Child about to sleep\n");
for (int j = 0; j < childPostSleep; j++)
sleep(1);
printf("Child about to exit\n");
exit(EXIT_SUCCESS);
default:
printf("Parent (%ld) about to sleep for %d seconds\n",
(long) getpid(), parentSleep);
sleep(parentSleep);
printf("Parent (%ld) terminating\n", (long) getpid());
exit(EXIT_SUCCESS);
}
}
Reported-by: Jann Horn <jann@thejh.net>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
The signal is process directed and the siginfo_t->si_pid
filed contains the PID of the terminating parent.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Jakub Wilk