6e00b7a858
iconv.1, ldd.1, accept.2, access.2, add_key.2, arch_prctl.2, bpf.2, chmod.2, chown.2, close_range.2, copy_file_range.2, execve.2, execveat.2, fanotify_mark.2, futex.2, futimesat.2, getpriority.2, intro.2, ioctl_tty.2, keyctl.2, link.2, membarrier.2, mkdir.2, mknod.2, mlock.2, mount.2, mount_setattr.2, open.2, open_by_handle_at.2, perf_event_open.2, pidfd_open.2, readlink.2, readv.2, rename.2, request_key.2, seccomp.2, sigaction.2, stat.2, statx.2, symlink.2, syscalls.2, umount.2, unlink.2, utimensat.2, wait.2, bsearch.3, fflush.3, getaddrinfo.3, getauxval.3, getopt.3, getsubopt.3, mkfifo.3, pthread_mutex_consistent.3, pthread_setname_np.3, pthread_tryjoin_np.3, scandir.3, sem_wait.3, stailq.3, strlen.3, strstr.3, termios.3, tsearch.3, wcslen.3, wcstok.3, wordexp.3, proc.5, capabilities.7, cgroups.7, fanotify.7, mount_namespaces.7, namespaces.7, path_resolution.7, pipe.7, posixoptions.7, user_namespaces.7, vdso.7, iconvconfig.8, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-08-27 02:44:07 +02:00
74ed673c59
mount.2: ERRORS: add EPERM error for case where a mount is locked
...
Refer the reader to mount_namespaces(7) for details.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-08-20 23:37:47 +02:00
525a8b5461
fanotify_mark.2, link.2, mount.2, umount.2, proc.5, cgroups.7, fanotify.7: Terminology clean-up: "mount point" ==> "mount"
...
Many times, these pages use the terminology "mount point", where
"mount" would be better. A "mount point" is the location at which
a mount is attached. A "mount" is an association between a
filesystem and a mount point.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-08-18 01:38:14 +02:00
a3ade5b2b1
mount.2: SEE ALSO: add mount_setattr(2)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-08-13 01:21:01 +02:00
9593da4de3
mount.2: Minor fixes to Topi Miettinen's patch
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-06-20 15:54:10 +12:00
a4173b878c
mount.2: document SELinux use of MS_NOSUID mount flag
...
Using mount flag `MS_NOSUID` also affects SELinux domain transitions but
this has not been documented well.
Signed-off-by: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-06-20 15:53:07 +12:00
3ab99460db
mount.2: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-04-06 13:44:48 +02:00
1d767b552e
getent.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, mtrace.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, add_key.2, adjtimex.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, bpf.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, close_range.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fanotify_init.2, fanotify_mark.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_rm_watch.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_console.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_fslabel.2, ioctl_getfsmap.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, open_by_handle_at.2, openat2.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pidfd_getfd.2, pidfd_open.2, pidfd_send_signal.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, restart_syscall.2, rmdir.2, rt_sigqueueinfo.2, s390_guarded_storage.2, s390_pci_mmio_write.2, s390_runtime_instr.2, s390_sthyi.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, stime.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscall.2, syscalls.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, circleq.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, fileno.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fopencookie.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getutmp.3, getw.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, list.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setsigmask_np.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_mutex_consistent.3, pthread_mutexattr_getpshared.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, readdir_r.3, realpath.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, slist.3, sockatmark.3, sqrt.3, stailq.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tailq.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console_codes.4, dsp56k.4, hpsa.4, initrd.4, loop.4, lp.4, msr.4, random.4, rtc.4, smartpqi.4, veth.4, wavelan.4, acct.5, core.5, elf.5, hosts.5, locale.5, proc.5, resolv.conf.5, rpc.5, slabinfo.5, sysfs.5, tmpfs.5, utmp.5, address_families.7, aio.7, attributes.7, bootparam.7, capabilities.7, cgroups.7, complex.7, ddp.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, hier.7, inode.7, inotify.7, ip.7, ipv6.7, keyrings.7, locale.7, man-pages.7, man.7, math_error.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, numa.7, packet.7, pkeys.7, pthreads.7, queue.7, raw.7, rtnetlink.7, sched.7, session-keyring.7, shm_overview.7, sigevent.7, signal-safety.7, signal.7, sock_diag.7, socket.7, spufs.7, symlink.7, system_data_types.7, tcp.7, time_namespaces.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, user_namespaces.7, vdso.7, vsock.7, x25.7, iconvconfig.8, ld.so.8, ldconfig.8, sln.8, tzselect.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-03-22 00:15:34 +01:00
c43f976fd8
mount.2: Note that the 'data' argument can be NULL
...
Verified from reading the kernel source and looking at the source
of mount(8). Surprisingly, this has not documented after so many
years.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-20 13:12:33 +01:00
f6a4078be5
Various pages: Standardize wording around setting of 'errno' on error
...
In the RETURN VALUE sections, a number of different wordings
are used in to describe the fact that 'errno' is set on error.
There's no reason for the difference in wordings, since the same
thing is being described in each case. Switch to a standard
wording that is the same as FreeBSD and similar to the wording
used in POSIX.1.
In this change, fix some instances stating that 'errno' is set
"appropriately" to instead say "to indicate the error".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2021-01-07 14:27:35 +01:00
9f43659f85
getent.1, access.2, cacheflush.2, chroot.2, clock_getres.2, fcntl.2, getrusage.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, link.2, llseek.2, mmap.2, mount.2, readv.2, restart_syscall.2, semctl.2, set_mempolicy.2, set_tid_address.2, shmctl.2, sigaction.2, sigaltstack.2, spu_create.2, statfs.2, subpage_prot.2, syscalls.2, timer_getoverrun.2, uselib.2, INFINITY.3, __ppc_set_ppr_med.3, bstring.3, btree.3, ctime.3, fgetc.3, fopen.3, getcontext.3, gethostbyname.3, getnetent.3, getprotoent.3, getservent.3, inet.3, j0.3, list.3, makecontext.3, nextafter.3, posix_memalign.3, profil.3, pthread_tryjoin_np.3, puts.3, rcmd.3, resolver.3, rtime.3, sigsetops.3, strnlen.3, tailq.3, elf.5, filesystems.5, nscd.conf.5, proc.5, utmp.5, attributes.7, ipv6.7, packet.7, pthreads.7, signal-safety.7, signal.7, spufs.7, system_data_types.7, tcp.7: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-12-21 16:19:35 +01:00
d556548bf4
getent.1, fanotify_mark.2, fcntl.2, futex.2, membarrier.2, mmap.2, mount.2, msgctl.2, readv.2, semctl.2, set_mempolicy.2, shmctl.2, syscalls.2, abs.3, bstring.3, btree.3, ctime.3, drand48.3, fgetc.3, fopen.3, gethostbyname.3, getnetent.3, getprotoent.3, getservent.3, INFINITY.3, __ppc_set_ppr_med.3, inet.3, j0.3, makecontext.3, printf.3, puts.3, resolver.3, sigsetops.3, elf.5, nscd.conf.5, proc.5, inotify.7, ipv6.7, spufs.7, system_data_types.7: Use Oxford comma
...
Found using:
pcregrep -rnM "^\.[B|I]R .*,\n\.[B|I].*[^,]\nand" man? |grep ^man |sort
Signed-off-by: Alejandro Colomar <colomar.6.4.3@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-11-15 21:30:30 +01:00
97ba2b53f5
mount.2, statfs.2: Minor tweaks to Ross Zwisler's patch
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-11-06 07:40:06 +01:00
527375b2c7
mount.2, statfs.2: Add NOSYMFOLLOW flags to mount(2) and statfs(2)
...
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-11-06 07:40:06 +01:00
e7497fba60
mount.2: Minor wording improvement
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-08-28 13:51:17 +02:00
ed6c69cab9
intro.1, clock_getres.2, execve.2, fcntl.2, iopl.2, lseek.2, mknod.2, mmap.2, mount.2, mq_getsetattr.2, pidfd_open.2, prctl.2, setns.2, sgetmask.2, sigaction.2, stat.2, statx.2, sync.2, syscalls.2, syslog.2, timerfd_create.2, umask.2, a64l.3, aio_init.3, atoi.3, dladdr.3, fread.3, getpt.3, isfdtype.3, malloc_stats.3, malloc_trim.3, mkfifo.3, mq_close.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, posix_memalign.3, posix_openpt.3, pthread_atfork.3, pthread_rwlockattr_setkind_np.3, regex.3, scanf.3, sem_close.3, sem_destroy.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sigset.3, sigvec.3, strftime.3, termios.3, console_codes.4, dsp56k.4, fd.4, lp.4, mouse.4, pts.4, sk98lin.4, dir_colors.5, proc.5, resolv.conf.5, termcap.5, utmp.5, aio.7, armscii-8.7, arp.7, capabilities.7, cgroups.7, charsets.7, cp1251.7, cp1252.7, environ.7, glob.7, inode.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, keyrings.7, koi8-r.7, koi8-u.7, mailaddr.7, man-pages.7, netdevice.7, operator.7, persistent-keyring.7, process-keyring.7, pthreads.7, pty.7, raw.7, regex.7, session-keyring.7, shm_overview.7, signal.7, socket.7, suffixes.7, thread-keyring.7, unicode.7, units.7, uri.7, user-keyring.7, user-session-keyring.7, iconvconfig.8, ld.so.8, zic.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-08-13 10:01:14 +02:00
16170fbc5c
mount.2: ERRORS: add EINVAL for bind mount of mount namespace inode
...
See kernel commit 8823c079ba7136dc1948d6f6dcb5f8022bde438e
and the in fs/namespace.c::do_loopback():
err = -EINVAL;
if (mnt_ns_loop(old_path.dentry))
goto out;
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2020-07-03 12:38:18 +02:00
f83eb6bf0d
mount.2, pidfd_open.2, fuse.4: Minor fix: s/file system/filesystem/
...
Reported-by: Marko Myllynen <myllynen@redhat.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-10-13 21:04:32 +02:00
459fe99546
mount.2: Describe the concept of "parent mounts"
...
Reported-by: Reid Priedhorsky <reidpr@lanl.gov>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-10-08 17:26:51 +02:00
e0e0ba7d01
mount.2: tfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-10-08 17:23:20 +02:00
dd858bfd5e
mount.2: Rework the text on mount namespaces a little
...
Eliminate the term "Per-process namespaces" and add a reference
to mount_namespaces(7).
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-10-08 16:44:58 +02:00
5d3bcce72d
mount.2: wfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-10-08 16:44:58 +02:00
632940d96d
mount.2: NOTES: add subsection heading for /proc/[pid]/{mounts,mountinfo}
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-10-08 16:44:58 +02:00
63121bd499
pldd.1, bpf.2, chdir.2, clone.2, fanotify_init.2, fanotify_mark.2, intro.2, ipc.2, mount.2, mprotect.2, msgctl.2, msgget.2, msgop.2, pivot_root.2, pkey_alloc.2, poll.2, prctl.2, semctl.2, semget.2, semop.2, setxattr.2, shmctl.2, shmget.2, shmop.2, tkill.2, dlopen.3, exec.3, ftok.3, getutent.3, on_exit.3, strcat.3, cpuid.4, proc.5, capabilities.7, cgroup_namespaces.7, credentials.7, fanotify.7, mount_namespaces.7, namespaces.7, sched.7, signal.7, socket.7, unix.7, user_namespaces.7, vdso.7, xattr.7, ld.so.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-08-02 08:34:32 +02:00
6f4a00d62f
mount.2: ERRORS: Add a couple of EINVAL errors for MS_MOVE
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-07-28 09:17:06 +02:00
0610c6f1f8
mount.2: tfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-07-26 23:28:08 +02:00
a68bb0b38d
mount.2: SEE ALSO: add chroot(2) and pivot_root(2)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-07-26 23:27:18 +02:00
9ba0180298
getent.1, iconv.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, pldd.1, sprof.1, time.1, _syscall.2, accept.2, add_key.2, adjtimex.2, bind.2, bpf.2, capget.2, chown.2, chroot.2, clock_getres.2, clone.2, connect.2, copy_file_range.2, epoll_ctl.2, epoll_wait.2, eventfd.2, fanotify_init.2, fanotify_mark.2, fcntl.2, fsync.2, futex.2, getcpu.2, getdents.2, getgid.2, getgroups.2, getpid.2, gettid.2, gettimeofday.2, getuid.2, getxattr.2, inotify_add_watch.2, inotify_init.2, ioctl_fat.2, ioctl_ns.2, ioctl_userfaultfd.2, ioprio_set.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, madvise.2, memfd_create.2, migrate_pages.2, mount.2, mprotect.2, mremap.2, msgctl.2, msgop.2, nfsservctl.2, open_by_handle_at.2, perf_event_open.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, readahead.2, readdir.2, readlink.2, reboot.2, recvmmsg.2, removexattr.2, rename.2, request_key.2, s390_guarded_storage.2, s390_runtime_instr.2, s390_sthyi.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, seccomp.2, select.2, select_tut.2, semctl.2, sendmmsg.2, set_thread_area.2, setgid.2, setns.2, setuid.2, setxattr.2, shmctl.2, sigaction.2, signalfd.2, sigsuspend.2, socket.2, socketpair.2, spu_run.2, stat.2, statx.2, subpage_prot.2, syscalls.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, vmsplice.2, write.2, CPU_SET.3, __ppc_get_timebase.3, alloca.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bsd_signal.3, bstring.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, cmsg.3, confstr.3, ctermid.3, ctime.3, des_crypt.3, dl_iterate_phdr.3, dlinfo.3, dlsym.3, duplocale.3, end.3, endian.3, errno.3, exec.3, exit.3, ferror.3, fgetws.3, fmemopen.3, fnmatch.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isatty.3, iswblank.3, iswspace.3, lockf.3, makecontext.3, mallinfo.3, malloc.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, putenv.3, qsort.3, rand.3, random.3, readdir.3, regex.3, resolver.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcmp.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, system.3, termios.3, trunc.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, xcrypt.3, console_codes.4, dsp56k.4, full.4, initrd.4, lirc.4, loop.4, st.4, tty.4, vcs.4, charmap.5, core.5, host.conf.5, locale.5, proc.5, repertoiremap.5, resolv.conf.5, termcap.5, tmpfs.5, tzfile.5, aio.7, capabilities.7, cgroup_namespaces.7, cgroups.7, charsets.7, complex.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, locale.7, man-pages.7, man.7, namespaces.7, pid_namespaces.7, pkeys.7, pthreads.7, rtld-audit.7, sched.7, signal.7, sock_diag.7, socket.7, tcp.7, udp.7, unicode.7, user_namespaces.7, utf-8.7, zdump.8, zic.8: tstamp
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-03-06 15:12:10 +01:00
d70a2e571d
mount.2: wfix (clarify effect of unbindable propagation type)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-12-14 11:35:40 +01:00
1c1ccb2c65
mount.2: Document EROFS for read-only filesystems
...
See https://bugzilla.kernel.org/show_bug.cgi?id=200649
Reported-by: Harry Mallon <hjmallon@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-11-05 10:15:23 +01:00
ed6d190860
mount.2: EACCES: note some reasons why a filesystem may be read-only
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-11-05 10:12:00 +01:00
46183bb06e
mount.2: tfix
...
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-09-06 23:18:06 +02:00
849971a10c
mount.2: Add MS_STRICTATIME to list of flags that can be used in remount
...
Reported-by: Simone Piccardi <piccardi@truelite.it>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 17:17:06 +02:00
38ea2e7662
mount.2: Clarify that per-superblock flags are shared during remount
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 17:17:06 +02:00
f66b1d8b2e
mount.2: Attempts to change MS_SILENT setting during remount are silently ignored
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 17:17:06 +02:00
63b0b1a341
mount.2: Clearly distinguish per-mount-point vs per-superblock mount flags
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 17:17:06 +02:00
2008f97d6f
mount.2: wfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 17:17:06 +02:00
182c1e839c
mount.2: MS_SILENT is ignored when changing propagation type
...
MS_SILENT can be specified when changing propagation type,
but is ignored, as far as I can see from reading the code.
(The flags are passed to do_change_type(), which, as well
as the propagation flags, allows MS_REC and MS_SILENT
(in flags_to_propagation_type()), but does noting with
MS_SILENT. (Linux 4.17 source)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 17:17:06 +02:00
158c5bc0f0
mount.2: wfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 17:17:06 +02:00
fca61050bf
mount.2: Minor rewording
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 16:04:06 +02:00
3d17f2f05c
mount.2: Remove crufty sentence about MS_BIND + MS_REMOUNT
...
This sentence is left over from an earlier rewrite of the text,
and the relevant details are covered a few paragraphs later.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 16:04:06 +02:00
e0a21e1338
mount.2: srcfix
2018-08-20 16:04:06 +02:00
fa4c100d8d
mount.2: srcfix: update FIXME
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 16:04:06 +02:00
a6bfc7571b
mount.2: tfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 16:04:06 +02:00
18132fd6f7
mount.2: SEE ALSO: add ioctl_iflags(2)
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 16:04:06 +02:00
495a1a8988
mount.2: srcfix: add FIXME
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 16:04:06 +02:00
41976bc5f3
mount.2: Mandatory locking also now requires CONFIG_MANDATORY_FILE_LOCKING
...
This is so since Linux 4.5. See the definition of may_mandlock()
in fs/namespace.c.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 16:04:06 +02:00
054ea65ed8
mount.2: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 16:04:06 +02:00
e56ab30d61
mount.2: ffix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 14:45:21 +02:00
5ea1abf88b
mount.2: wfix
...
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2018-08-20 14:45:21 +02:00
Michael Kerrisk