Move SEE ALSO section to end of page

man2/getitimer.2

@@ -139,11 +139,6 @@ Interval timers are preserved across an
 .BR execve (2).
 .SH "CONFORMING TO"
 POSIX.1-2001, SVr4, 4.4BSD (this call first appeared in 4.2BSD).
-.SH "SEE ALSO"
-.BR gettimeofday (2),
-.BR sigaction (2),
-.BR signal (2),
-.BR time (7)
 .SH BUGS
 The generation and delivery of a signal are distinct, and
 only one instance of each of the signals listed above may be pending
@@ -192,3 +187,8 @@ value.
 .\" which apparently should result in this problem
 .\" being fixed after a clean-up period of one year
 .\" (i.e., March 2007).
+.SH "SEE ALSO"
+.BR gettimeofday (2),
+.BR sigaction (2),
+.BR signal (2),
+.BR time (7)

man3/btowc.3

@@ -40,8 +40,6 @@ If \fIc\fP is EOF or not a valid multibyte sequence of length 1,
 it returns WEOF.
 .SH "CONFORMING TO"
 C99, POSIX.1-2001.
-.SH "SEE ALSO"
-.BR mbtowc (3)
 .SH NOTES
 The behaviour of
 .BR btowc ()
@@ -55,3 +53,5 @@ sequences.
 Use the function
 .BR mbtowc ()
 instead.
+.SH "SEE ALSO"
+.BR mbtowc (3)

man3/btree.3

@@ -214,6 +214,8 @@ access method routines may fail and set
 .I errno
 for any of the errors specified for the library routine
 .BR dbopen (3).
+.SH BUGS
+Only big and little endian byte order is supported.
 .SH "SEE ALSO"
 .BR dbopen (3),
 .BR hash (3),
@@ -229,5 +231,3 @@ Bayer and Unterauer, ACM Transactions on Database Systems, Vol. 2, 1
 .sp
 .IR "The Art of Computer Programming Vol. 3: Sorting and Searching" ,
 D.E. Knuth, 1968, pp 471-480.
-.SH BUGS
-Only big and little endian byte order is supported.

man3/daemon.3

@@ -72,9 +72,6 @@ to any of the errors specified for the
 .BR fork (2)
 and
 .BR setsid (2).
-.SH "SEE ALSO"
-.BR fork (2),
-.BR setsid (2)
 .SH NOTES
 The glibc implementation can also return \-1 when
 .I /dev/null
@@ -89,3 +86,6 @@ A similar function appears on the BSDs.
 The
 .BR daemon ()
 function first appeared in 4.4BSD.
+.SH "SEE ALSO"
+.BR fork (2),
+.BR setsid (2)

man3/dbopen.3

@@ -452,14 +452,6 @@ routines may fail and set
 .I errno
 for any of the errors specified for the library routine
 .BR fsync (2).
-.SH "SEE ALSO"
-.BR btree (3),
-.BR hash (3),
-.BR mpool (3),
-.BR recno (3)
-.sp
-.IR "LIBTP: Portable, Modular Transactions for UNIX" ,
-Margo Seltzer, Michael Olson, USENIX proceedings, Winter 1992.
 .SH BUGS
 The typedef DBT is a mnemonic for ``data base thang'', and was used
 because no-one could think of a reasonable name that wasn't already used.
@@ -469,3 +461,11 @@ future version of the interface.
 .PP
 None of the access methods provide any form of concurrent access,
 locking, or transactions.
+.SH "SEE ALSO"
+.BR btree (3),
+.BR hash (3),
+.BR mpool (3),
+.BR recno (3)
+.sp
+.IR "LIBTP: Portable, Modular Transactions for UNIX" ,
+Margo Seltzer, Michael Olson, USENIX proceedings, Winter 1992.

man3/des_crypt.3

@@ -101,12 +101,6 @@ is the 8-byte initialization
 vector for the chaining.
 It is updated to the next initialization
 vector upon return.
-.SH "SEE ALSO"
-.BR des (1),
-.BR crypt (3)
-.\" added, aeb
-and
-.BR xcrypt (3)
 .SH RETURN VALUE
 .PD 0
 .TP 20
@@ -138,4 +132,9 @@ glibc 2.1 and later.
 .SH "CONFORMING TO"
 4.3BSD.
 Not in POSIX.1-2001.
-
+.SH "SEE ALSO"
+.BR des (1),
+.BR crypt (3)
+.\" added, aeb
+and
+.BR xcrypt (3)

man3/err.3

@@ -142,12 +142,6 @@ if ((fd = open(raw_device, O_RDONLY, 0)) == \-1)
 if ((fd = open(block_device, O_RDONLY, 0)) == \-1)
 	err(1, "%s", block_device);
 .Ed
-.Sh SEE ALSO
-.Xr error 3 ,
-.Xr exit 3 ,
-.Xr printf 3 ,
-.Xr perror 3 ,
-.Xr strerror 3
 .Sh "CONFORMING TO"
 These functions are non-standard BSD extensions.
 .Sh HISTORY
@@ -157,3 +151,9 @@ and
 .Fn warn
 functions first appeared in
 .Bx 4.4 .
+.Sh SEE ALSO
+.Xr error 3 ,
+.Xr exit 3 ,
+.Xr printf 3 ,
+.Xr perror 3 ,
+.Xr strerror 3

man3/exec.3

@@ -168,13 +168,6 @@ All of these functions may fail and set
 .I errno
 for any of the errors specified for the library function
 .BR execve (2).
-.SH "SEE ALSO"
-.BR sh (1),
-.BR execve (2),
-.BR fork (2),
-.BR ptrace (2),
-.BR fexecve (3),
-.BR environ (7)
 .SH NOTES
 On some other systems the default path (used when the environment
 does not contain the variable \fBPATH\fR) has the current working
@@ -211,3 +204,10 @@ They now return if any error other than the ones
 described above occurs.
 .SH "CONFORMING TO"
 POSIX.1-2001.
+.SH "SEE ALSO"
+.BR sh (1),
+.BR execve (2),
+.BR fork (2),
+.BR ptrace (2),
+.BR fexecve (3),
+.BR environ (7)

man3/fts.3

@@ -742,17 +742,17 @@ as follows:
 .It Bq Er EINVAL
 The options were invalid.
 .El
-.Sh SEE ALSO
-.Xr find 1 ,
-.Xr chdir 2 ,
-.Xr stat 2 ,
-.Xr ftw 3 ,
-.Xr qsort 3
 .Sh "CONFORMING TO"
 4.4BSD. The
 .Nm fts
 utility is expected to be included in a future
 .St -p1003.1-88
 revision.
-.Sh AVAILABILITY
+.Sh VERSIONS
 These functions are available in Linux since glibc2.
+.Sh SEE ALSO
+.Xr find 1 ,
+.Xr chdir 2 ,
+.Xr stat 2 ,
+.Xr ftw 3 ,
+.Xr qsort 3

man3/fwide.3

@@ -57,9 +57,6 @@ A return value
 A return value of zero means undecided.
 .SH "CONFORMING TO"
 C99, POSIX.1-2001.
-.SH "SEE ALSO"
-.BR fprintf (3),
-.BR fwprintf (3)
 .SH NOTES
 Wide-character output to a byte oriented stream can be performed through the
 .BR fprintf (3)
@@ -69,3 +66,6 @@ Char oriented output to a wide-character oriented stream can be performed
 through the
 .BR fwprintf (3)
 function with the %c and %s directives.
+.SH "SEE ALSO"
+.BR fprintf (3),
+.BR fwprintf (3)

man3/getloadavg.3

@@ -52,10 +52,6 @@ over the last 1, 5, and 15 minutes, respectively.
 .Sh DIAGNOSTICS
 If the load average was unobtainable, \-1 is returned; otherwise,
 the number of samples actually retrieved is returned.
-.Sh SEE ALSO
-.Xr uptime 1 ,
-.Xr proc 5,
-.Xr feature_test_macros 7
 .Sh HISTORY
 The
 .Fn getloadavg
@@ -66,3 +62,7 @@ This function is available in glibc since version 2.2.
 Not in POSIX.1-2001.
 Present on the BSDs and Solaris.
 .\" mdoc seems to have a bug - there must be no newline here
+.Sh SEE ALSO
+.Xr uptime 1 ,
+.Xr proc 5,
+.Xr feature_test_macros 7

man3/getpass.3

@@ -94,8 +94,6 @@ Libc4 and libc5 have never supported PASS_MAX or _SC_PASS_MAX.
 Glibc2 accepts _SC_PASS_MAX and returns BUFSIZ (e.g., 8192).
 .SH FILES
 .I /dev/tty
-.SH "SEE ALSO"
-.BR crypt (3)
 .SH HISTORY
 A
 .BR getpass ()
@@ -106,3 +104,5 @@ Removed in POSIX.1-2001.
 .SH BUGS
 The calling process should zero the password as soon as possible to avoid
 leaving the cleartext password visible in the process's address space.
+.SH "SEE ALSO"
+.BR crypt (3)

man3/getrpcent.3

@@ -96,10 +96,6 @@ program number is found, or until end-of-file is encountered.
 .SH "CONFORMING TO"
 Not in POSIX.1-2001.
 Present on the BSDs, Solaris, and many other systems.
-.SH "SEE ALSO"
-.BR rpc (5),
-.BR rpcinfo (8),
-.BR ypserv (8)
 .SH RETURN VALUE
 .LP
 A
@@ -113,3 +109,7 @@ All information
 is contained in a static area
 so it must be copied if it is
 to be saved.
+.SH "SEE ALSO"
+.BR rpc (5),
+.BR rpcinfo (8),
+.BR ypserv (8)

man3/hash.3

@@ -144,6 +144,8 @@ access method routines may fail and set
 .I errno
 for any of the errors specified for the library routine
 .BR dbopen (3).
+.SH BUGS
+Only big and little endian byte order is supported.
 .SH "SEE ALSO"
 .BR btree (3),
 .BR dbopen (3),
@@ -155,5 +157,3 @@ Per-Ake Larson, Communications of the ACM, April 1988.
 .sp
 .IR "A New Hash Package for UNIX" ,
 Margo Seltzer, USENIX Proceedings, Winter 1991.
-.SH BUGS
-Only big and little endian byte order is supported.

man3/inet_ntop.3

@@ -104,8 +104,8 @@ is of type
 Many systems follow RFC\ 2553.
 Glibc 2.0 and 2.1 have size_t, but 2.2 has socklen_t.
 .\" 2.1.3: size_t, 2.1.91: socklen_t
-.SH "SEE ALSO"
-.BR inet_pton (3)
 .SH BUGS
 .B AF_INET6
 converts IPv6-mapped IPv4 addresses into an IPv6 format.
+.SH "SEE ALSO"
+.BR inet_pton (3)

man3/inet_pton.3

@@ -98,11 +98,11 @@ A positive value is returned if the network address was successfully
 converted.
 .SH "CONFORMING TO"
 POSIX.1-2001.
-.SH "SEE ALSO"
-.BR inet_ntop (3)
 .SH BUGS
 .B AF_INET6
 does not recognize IPv4 addresses.
 An explicit IPv6-mapped IPv4 address must be supplied in
 .I src
 instead.
+.SH "SEE ALSO"
+.BR inet_ntop (3)

man3/iswalnum.3

@@ -59,11 +59,11 @@ belonging to the wide-character class "alnum".
 Otherwise it returns zero.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR isalnum (3),
-.BR iswctype (3)
 .SH NOTES
 The behaviour of
 .BR iswalnum ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR isalnum (3),
+.BR iswctype (3)

man3/iswalpha.3

@@ -63,11 +63,11 @@ belonging to the wide-character class "alpha".
 Otherwise it returns zero.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR isalpha (3),
-.BR iswctype (3)
 .SH NOTES
 The behaviour of
 .BR iswalpha ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR isalpha (3),
+.BR iswctype (3)

man3/iswblank.3

@@ -50,11 +50,11 @@ belonging to the wide-character class "blank".
 Otherwise it returns zero.
 .SH "CONFORMING TO"
 POSIX.1-2001.
-.SH "SEE ALSO"
-.BR isblank (3),
-.BR iswctype (3)
 .SH NOTES
 The behaviour of
 .BR iswblank ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR isblank (3),
+.BR iswctype (3)

man3/iswcntrl.3

@@ -44,11 +44,11 @@ wide character belonging to the wide-character class "cntrl".
 Otherwise it returns zero.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR iscntrl (3),
-.BR iswctype (3)
 .SH NOTES
 The behaviour of
 .BR iswcntrl ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR iscntrl (3),
+.BR iswctype (3)

man3/iswctype.3

@@ -42,6 +42,11 @@ property.
 Otherwise it returns 0.
 .SH "CONFORMING TO"
 C99.
+.SH NOTES
+The behaviour of
+.BR iswctype ()
+depends on the LC_CTYPE category of the
+current locale.
 .SH "SEE ALSO"
 .BR iswalnum (3),
 .BR iswalpha (3),
@@ -56,8 +61,3 @@ C99.
 .BR iswupper (3),
 .BR iswxdigit (3),
 .BR wctype (3)
-.SH NOTES
-The behaviour of
-.BR iswctype ()
-depends on the LC_CTYPE category of the
-current locale.

man3/iswdigit.3

@@ -62,11 +62,11 @@ belonging to the wide-character class "digit".
 Otherwise it returns zero.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR isdigit (3),
-.BR iswctype (3)
 .SH NOTES
 The behaviour of
 .BR iswdigit ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR isdigit (3),
+.BR iswctype (3)

man3/iswgraph.3

@@ -55,11 +55,11 @@ belonging to the wide-character class "graph".
 Otherwise it returns zero.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR isgraph (3),
-.BR iswctype (3)
 .SH NOTES
 The behaviour of
 .BR iswgraph ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR isgraph (3),
+.BR iswctype (3)

man3/iswlower.3

@@ -67,10 +67,6 @@ belonging to the wide-character class "lower".
 Otherwise it returns zero.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR islower (3),
-.BR iswctype (3),
-.BR towlower (3)
 .SH NOTES
 The behaviour of
 .BR iswlower ()
@@ -79,3 +75,7 @@ current locale.
 .PP
 This function is not very appropriate for dealing with Unicode characters,
 because Unicode knows about three cases: upper, lower and title case.
+.SH "SEE ALSO"
+.BR islower (3),
+.BR iswctype (3),
+.BR towlower (3)

man3/iswprint.3

@@ -41,11 +41,11 @@ wide character belonging to the wide-character class "print".
 Otherwise it returns zero.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR isprint (3),
-.BR iswctype (3)
 .SH NOTES
 The behaviour of
 .BR iswprint ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR isprint (3),
+.BR iswctype (3)

man3/iswpunct.3

@@ -53,9 +53,6 @@ belonging to the wide-character class "punct".
 Otherwise it returns zero.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR ispunct (3),
-.BR iswctype (3)
 .SH NOTES
 The behaviour of
 .BR iswpunct ()
@@ -65,3 +62,6 @@ current locale.
 This function's name is a misnomer when dealing with Unicode characters,
 because the wide-character class "punct" contains both punctuation characters
 and symbol (math, currency, etc.) characters.
+.SH "SEE ALSO"
+.BR ispunct (3),
+.BR iswctype (3)

man3/iswspace.3

@@ -48,11 +48,11 @@ belonging to the wide-character class "space".
 Otherwise it returns zero.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR isspace (3),
-.BR iswctype (3)
 .SH NOTES
 The behaviour of
 .BR iswspace ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR isspace (3),
+.BR iswctype (3)

man3/iswupper.3

@@ -59,10 +59,6 @@ belonging to the wide-character class "upper".
 Otherwise it returns zero.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR isupper (3),
-.BR iswctype (3),
-.BR towupper (3)
 .SH NOTES
 The behaviour of
 .BR iswupper ()
@@ -71,3 +67,7 @@ current locale.
 .PP
 This function is not very appropriate for dealing with Unicode characters,
 because Unicode knows about three cases: upper, lower and title case.
+.SH "SEE ALSO"
+.BR isupper (3),
+.BR iswctype (3),
+.BR towupper (3)

man3/iswxdigit.3

@@ -53,11 +53,11 @@ belonging to the wide-character class "xdigit".
 Otherwise it returns zero.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR iswctype (3),
-.BR isxdigit (3)
 .SH NOTES
 The behaviour of
 .BR iswxdigit ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR iswctype (3),
+.BR isxdigit (3)

man3/malloc.3

@@ -122,9 +122,6 @@ If
 fails the original block is left untouched; it is not freed or moved.
 .SH "CONFORMING TO"
 C89, C99.
-.SH "SEE ALSO"
-.BR brk (2),
-.BR posix_memalign (3)
 .SH NOTES
 The Unix98 standard requires
 .BR malloc (),
@@ -194,3 +191,6 @@ See also the kernel Documentation directory, files
 .I vm/overcommit-accounting
 and
 .IR sysctl/vm.txt .
+.SH "SEE ALSO"
+.BR brk (2),
+.BR posix_memalign (3)

man3/mblen.3

@@ -65,8 +65,6 @@ invalid multibyte sequence was encountered or if it couldn't parse a complete
 multibyte character.
 .SH "CONFORMING TO"
 C99
-.SH "SEE ALSO"
-.BR mbrlen (3)
 .SH NOTES
 The behaviour of
 .BR mblen ()
@@ -77,3 +75,5 @@ The function
 .BR mbrlen (3)
 provides a better interface to the same
 functionality.
+.SH "SEE ALSO"
+.BR mbrlen (3)

man3/mbrlen.3

@@ -64,10 +64,10 @@ It returns (size_t)(\-2) if it couldn't parse a complete multibyte
 character, meaning that \fIn\fP should be increased.
 .SH "CONFORMING TO"
 C99
-.SH "SEE ALSO"
-.BR mbrtowc (3)
 .SH NOTES
 The behaviour of
 .BR mbrlen ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR mbrtowc (3)

man3/mbrtowc.3

@@ -97,10 +97,10 @@ It returns (size_t)(\-2) if it couldn't parse a complete multibyte
 character, meaning that \fIn\fP should be increased.
 .SH "CONFORMING TO"
 C99
-.SH "SEE ALSO"
-.BR mbsrtowcs (3)
 .SH NOTES
 The behaviour of
 .BR mbrtowc ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR mbsrtowcs (3)

man3/mbsinit.3

@@ -69,11 +69,11 @@ returns non-zero if \fI*ps\fP is an initial state, or if
 Otherwise it returns 0.
 .SH "CONFORMING TO"
 C99
-.SH "SEE ALSO"
-.BR mbsrtowcs (3),
-.BR wcsrtombs (3)
 .SH NOTES
 The behaviour of
 .BR mbsinit ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR mbsrtowcs (3),
+.BR wcsrtombs (3)

man3/mbsnrtowcs.3

@@ -82,9 +82,6 @@ If an invalid multibyte sequence was
 encountered, (size_t)(\-1) is returned, and \fIerrno\fP set to \fBEILSEQ\fP.
 .SH "CONFORMING TO"
 This function is a GNU extension.
-.SH "SEE ALSO"
-.BR iconv (3),
-.BR mbsrtowcs (3)
 .SH NOTES
 The behaviour of
 .BR mbsnrtowcs ()
@@ -92,3 +89,6 @@ depends on the LC_CTYPE category of the
 current locale.
 .PP
 Passing NULL as \fIps\fP is not multi-thread safe.
+.SH "SEE ALSO"
+.BR iconv (3),
+.BR mbsrtowcs (3)

man3/mbsrtowcs.3

@@ -71,10 +71,6 @@ If an invalid multibyte sequence was
 encountered, (size_t)(\-1) is returned, and \fIerrno\fP set to \fBEILSEQ\fP.
 .SH "CONFORMING TO"
 C99
-.SH "SEE ALSO"
-.BR iconv (3),
-.BR mbsnrtowcs (3),
-.BR mbstowcs (3)
 .SH NOTES
 The behaviour of
 .BR mbsrtowcs ()
@@ -82,3 +78,7 @@ depends on the LC_CTYPE category of the
 current locale.
 .PP
 Passing NULL as \fIps\fP is not multi-thread safe.
+.SH "SEE ALSO"
+.BR iconv (3),
+.BR mbsnrtowcs (3),
+.BR mbstowcs (3)

man3/mbstowcs.3

@@ -64,8 +64,6 @@ If an invalid multibyte sequence was
 encountered, (size_t)(\-1) is returned.
 .SH "CONFORMING TO"
 C99
-.SH "SEE ALSO"
-.BR mbsrtowcs (3)
 .SH NOTES
 The behaviour of
 .BR mbstowcs ()
@@ -76,3 +74,5 @@ The function
 .BR mbsrtowcs (3)
 provides a better interface to the same
 functionality.
+.SH "SEE ALSO"
+.BR mbsrtowcs (3)

man3/mbtowc.3

@@ -75,10 +75,6 @@ returns non-zero if the encoding
 has non-trivial shift state, or zero if the encoding is stateless.
 .SH "CONFORMING TO"
 C99
-.SH "SEE ALSO"
-.BR MB_CUR_MAX (3),
-.BR mbrtowc (3),
-.BR mbstowcs (3)
 .SH NOTES
 The behaviour of
 .BR mbtowc ()
@@ -90,3 +86,7 @@ The function
 .BR mbrtowc (3)
 provides
 a better interface to the same functionality.
+.SH "SEE ALSO"
+.BR MB_CUR_MAX (3),
+.BR mbrtowc (3),
+.BR mbstowcs (3)

man3/recno.3

@@ -197,6 +197,8 @@ or the following:
 [EINVAL]
 An attempt was made to add a record to a fixed-length database that
 was too large to fit.
+.SH BUGS
+Only big and little endian byte order is supported.
 .SH "SEE ALSO"
 .BR btree (3)
 .BR dbopen (3),
@@ -206,5 +208,3 @@ was too large to fit.
 .IR "Document Processing in a Relational Database System" ,
 Michael Stonebraker, Heidi Stettner, Joseph Kalash, Antonin Guttman,
 Nadene Lynn, Memorandum No. UCB/ERL M82/32, May 1982.
-.SH BUGS
-Only big and little endian byte order is supported.

man3/rexec.3

@@ -118,9 +118,6 @@ command) will be made the same as the
 and no
 provision is made for sending arbitrary signals to the remote process,
 although you may be able to get its attention by using out-of-band data.
-.Sh SEE ALSO
-.Xr rcmd 3 ,
-.Xr rexecd 8
 .Sh "CONFORMING TO"
 Not in POSIX.1-2001.
 Present on the BSDs, Solaris, and many other systems.
@@ -137,3 +134,6 @@ The underlying service is considered a big security hole and therefore
 not enabled on many sites, see
 .Xr rexecd 8
 for explanations.
+.Sh SEE ALSO
+.Xr rcmd 3 ,
+.Xr rexecd 8

man3/scanf.3

@@ -526,13 +526,6 @@ in which case the error indicator for the stream (see
 is set, and
 .I errno
 is set indicate the error.
-.SH "SEE ALSO"
-.BR getc (3),
-.BR printf (3),
-.BR setlocale (3),
-.BR strtod (3),
-.BR strtol (3),
-.BR strtoul (3)
 .SH "CONFORMING TO"
 The functions
 .BR fscanf (),
@@ -596,3 +589,10 @@ The usage of
 is not the same as on 4.4BSD,
 as it may be used in float conversions equivalently to
 .BR L .
+.SH "SEE ALSO"
+.BR getc (3),
+.BR printf (3),
+.BR setlocale (3),
+.BR strtod (3),
+.BR strtol (3),
+.BR strtoul (3)

man3/stdin.3

@@ -95,12 +95,6 @@ and
 The standard streams are closed by a call to
 .Xr exit 3
 and by normal program termination.
-.Sh SEE ALSO
-.Xr sh 1 ,
-.Xr csh 1 ,
-.Xr open 2 ,
-.Xr fopen 3 ,
-.Xr stdio 3
 .Sh CONSIDERATIONS
 The stream
 .Nm stderr
@@ -143,3 +137,9 @@ macros conform to
 .St -ansiC ,
 and this standard also stipulates that these three
 streams shall be open at program startup.
+.Sh SEE ALSO
+.Xr sh 1 ,
+.Xr csh 1 ,
+.Xr open 2 ,
+.Xr fopen 3 ,
+.Xr stdio 3

man3/towctrans.3

@@ -38,12 +38,12 @@ function returns the translated wide character,
 or WEOF if \fIwc\fP is WEOF.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR towlower (3),
-.BR towupper (3),
-.BR wctrans (3)
 .SH NOTES
 The behaviour of
 .BR towctrans ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR towlower (3),
+.BR towupper (3),
+.BR wctrans (3)

man3/towlower.3

@@ -37,10 +37,6 @@ function returns the lowercase equivalent of \fIwc\fP,
 or WEOF if \fIwc\fP is WEOF.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR iswlower (3),
-.BR towctrans (3),
-.BR towupper (3)
 .SH NOTES
 The behaviour of
 .BR towlower ()
@@ -49,3 +45,7 @@ current locale.
 .PP
 This function is not very appropriate for dealing with Unicode characters,
 because Unicode knows about three cases: upper, lower and title case.
+.SH "SEE ALSO"
+.BR iswlower (3),
+.BR towctrans (3),
+.BR towupper (3)

man3/towupper.3

@@ -37,10 +37,6 @@ function returns the uppercase equivalent of \fIwc\fP,
 or WEOF if \fIwc\fP is WEOF.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR iswupper (3),
-.BR towctrans (3),
-.BR towlower (3)
 .SH NOTES
 The behaviour of
 .BR towupper ()
@@ -49,3 +45,7 @@ current locale.
 .PP
 This function is not very appropriate for dealing with Unicode characters,
 because Unicode knows about three cases: upper, lower and title case.
+.SH "SEE ALSO"
+.BR iswupper (3),
+.BR towctrans (3),
+.BR towlower (3)

man3/ungetwc.3

@@ -52,10 +52,10 @@ function returns \fIwc\fP when successful, or WEOF upon
 failure.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR fgetwc (3)
 .SH NOTES
 The behaviour of
 .BR ungetwc ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR fgetwc (3)

man3/wcrtomb.3

@@ -70,8 +70,6 @@ represented as a multibyte sequence (according to the current locale),
 (size_t)(\-1) is returned, and \fIerrno\fP set to \fBEILSEQ\fP.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR wcsrtombs (3)
 .SH NOTES
 The behaviour of
 .BR wcrtomb ()
@@ -79,3 +77,5 @@ depends on the LC_CTYPE category of the
 current locale.
 .PP
 Passing NULL as \fIps\fP is not multi-thread safe.
+.SH "SEE ALSO"
+.BR wcsrtombs (3)

man3/wcscasecmp.3

@@ -42,11 +42,11 @@ returns a negative integer if \fIs1\fP is smaller
 than \fIs2\fP, ignoring case.
 .SH "CONFORMING TO"
 This function is a GNU extension.
-.SH "SEE ALSO"
-.BR strcasecmp (3),
-.BR wcscmp (3)
 .SH NOTES
 The behaviour of
 .BR wcscasecmp ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR strcasecmp (3),
+.BR wcscmp (3)

man3/wcsncasecmp.3

@@ -45,11 +45,11 @@ It returns a negative integer
 if truncated \fIs1\fP is smaller than truncated \fIs2\fP, ignoring case.
 .SH "CONFORMING TO"
 This function is a GNU extension.
-.SH "SEE ALSO"
-.BR strncasecmp (3),
-.BR wcsncmp (3)
 .SH NOTES
 The behaviour of
 .BR wcsncasecmp ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR strncasecmp (3),
+.BR wcsncmp (3)

man3/wcsnrtombs.3

@@ -90,9 +90,6 @@ could not be converted, (size_t)(\-1)
 is returned, and \fIerrno\fP set to \fBEILSEQ\fP.
 .SH "CONFORMING TO"
 This function is a GNU extension.
-.SH "SEE ALSO"
-.BR iconv (3),
-.BR wcsrtombs (3)
 .SH NOTES
 The behaviour of
 .BR wcsnrtombs ()
@@ -100,3 +97,6 @@ depends on the LC_CTYPE category of the
 current locale.
 .PP
 Passing NULL as \fIps\fP is not multi-thread safe.
+.SH "SEE ALSO"
+.BR iconv (3),
+.BR wcsrtombs (3)

man3/wcsrtombs.3

@@ -85,10 +85,6 @@ is returned, and
 set to \fBEILSEQ\fP.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR iconv (3),
-.BR wcsnrtombs (3),
-.BR wcstombs (3)
 .SH NOTES
 The behaviour of
 .BR wcsrtombs ()
@@ -96,3 +92,7 @@ depends on the LC_CTYPE category of the
 current locale.
 .PP
 Passing NULL as \fIps\fP is not multi-thread safe.
+.SH "SEE ALSO"
+.BR iconv (3),
+.BR wcsnrtombs (3),
+.BR wcstombs (3)

man3/wcstombs.3

@@ -64,8 +64,6 @@ If a wide character was encountered which could not be
 converted, (size_t)(\-1) is returned.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR wcsrtombs (3)
 .SH NOTES
 The behaviour of
 .BR wcstombs ()
@@ -76,3 +74,5 @@ The function
 .BR wcsrtombs (3)
 provides a thread safe interface to
 the same functionality.
+.SH "SEE ALSO"
+.BR wcsrtombs (3)

man3/wcswidth.3

@@ -36,11 +36,11 @@ returns the number of column positions for the
 wide-character string \fIs\fP, truncated to at most length \fIn\fP.
 .SH "CONFORMING TO"
 POSIX.1-2001.
-.SH "SEE ALSO"
-.BR iswprint (3),
-.BR wcwidth (3)
 .SH NOTES
 The behaviour of
 .BR wcswidth ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR iswprint (3),
+.BR wcwidth (3)

man3/wctob.3

@@ -41,8 +41,6 @@ function returns the single-byte representation of \fIc\fP,
 if it exists, of EOF otherwise.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR wctomb (3)
 .SH NOTES
 The behaviour of
 .BR wctob ()
@@ -55,3 +53,5 @@ distinguish single-byte and multi-byte characters.
 Use the function
 .BR wctomb (3)
 instead.
+.SH "SEE ALSO"
+.BR wctomb (3)

man3/wctomb.3

@@ -63,10 +63,6 @@ function returns non-zero if the
 encoding has non-trivial shift state, or zero if the encoding is stateless.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR MB_CUR_MAX (3),
-.BR wcrtomb (3),
-.BR wcstombs (3)
 .SH NOTES
 The behaviour of
 .BR wctomb ()
@@ -78,3 +74,7 @@ The function
 .BR wcrtomb (3)
 provides
 a better interface to the same functionality.
+.SH "SEE ALSO"
+.BR MB_CUR_MAX (3),
+.BR wcrtomb (3),
+.BR wcstombs (3)

man3/wctrans.3

@@ -50,10 +50,10 @@ is valid.
 Otherwise it returns \fI(wctrans_t)0\fP.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR towctrans (3)
 .SH NOTES
 The behaviour of
 .BR wctrans ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR towctrans (3)

man3/wctype.3

@@ -61,10 +61,10 @@ if the \fIname\fP is valid.
 Otherwise it returns \fI(wctype_t)0\fP.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR iswctype (3)
 .SH NOTES
 The behaviour of
 .BR wctype ()
 depends on the LC_CTYPE category of the
 current locale.
+.SH "SEE ALSO"
+.BR iswctype (3)

man3/wprintf.3

@@ -169,13 +169,6 @@ and
 They return \-1 when an error occurs.
 .SH "CONFORMING TO"
 C99.
-.SH "SEE ALSO"
-.BR fprintf (3),
-.BR fputwc (3),
-.BR fwide (3),
-.BR printf (3),
-.BR snprintf (3),
-.BR wscanf (3)
 .SH NOTES
 The behaviour of
 .BR wprintf ()
@@ -204,3 +197,10 @@ or
 .BR iconv (3),
 followed by
 .BR mbstowcs (3)).
+.SH "SEE ALSO"
+.BR fprintf (3),
+.BR fputwc (3),
+.BR fwide (3),
+.BR printf (3),
+.BR snprintf (3),
+.BR wscanf (3)

man4/initrd.4

@@ -394,17 +394,6 @@ the RAM disk driver cannot be loaded as a module.
 .I /linuxrc
 .br
 .I /initrd
-.SH "SEE ALSO"
-.BR chown (1),
-.BR mknod (1),
-.BR ram (4),
-.BR freeramdisk (8),
-.BR rdev (8)
-
-The documentation file
-.I initrd.txt
-in the kernel source package, the LILO documentation,
-the LOADLIN documentation, the SYSLINUX documentation.
 .\"
 .\"
 .\"
@@ -443,3 +432,14 @@ Hans Lermen <lermen@elserv.ffm.fgan.de>.
 The code for
 .BR initrd
 was added to the baseline Linux kernel in development version 1.3.73.
+.SH "SEE ALSO"
+.BR chown (1),
+.BR mknod (1),
+.BR ram (4),
+.BR freeramdisk (8),
+.BR rdev (8)
+
+The documentation file
+.I initrd.txt
+in the kernel source package, the LILO documentation,
+the LOADLIN documentation, the SYSLINUX documentation.

man4/st.4

@@ -772,12 +772,6 @@ The driver has been written by Kai M\(:akisara (Kai.Makisara@metla.fi)
 starting from a driver written by Dwayne Forsyth.
 Several other
 people have also contributed to the driver.
-.SH "SEE ALSO"
-.BR mt (1)
-.PP
-The file README.st or st.txt (kernel >= 2.6) in the kernel sources contains
-the most recent information about the driver and its configuration
-possibilities.
 .SH NOTES
 1. When exchanging data between systems, both systems have to agree on
 the physical tape block size.
@@ -826,11 +820,17 @@ The solution is to tell the software to use larger transfers (often
 telling it to use larger blocks).
 If this is not possible, direct transfers can be disabled.
 .SH COPYRIGHT
-Copyright \(co 1995 Robert K. Nichols.
+.\" Copyright \(co 1995 Robert K. Nichols.
-.br
+.\" .br
-Copyright \(co 1999-2005 Kai M\(:akisara.
+.\" Copyright \(co 1999-2005 Kai M\(:akisara.
+.\" .PP
+.\" Permission is granted to make and distribute verbatim copies of this
+.\" manual provided the copyright notice and this permission notice are
+.\" preserved on all copies.
+.\" Additional permissions are contained in the header of the source file.
+.SH "SEE ALSO"
+.BR mt (1)
 .PP
-Permission is granted to make and distribute verbatim copies of this
+The file README.st or st.txt (kernel >= 2.6) in the kernel sources contains
-manual provided the copyright notice and this permission notice are
+the most recent information about the driver and its configuration
-preserved on all copies.
+possibilities.
-Additional permissions are contained in the header of the source file.

man5/dir_colors.5

@@ -344,11 +344,6 @@ definitions, which are used by ISO 6429 terminals are:
 The default
 .B ENDCODE
 is undefined.
-.SH "SEE ALSO"
-.BR dircolors (1),
-.BR ls (1),
-.BR stty (1),
-.BR xterm (1)
 .SH FILES
 .TP
 .I /etc/DIR_COLORS
@@ -361,3 +356,8 @@ This page describes the
 .B dir_colors
 file format as used in the fileutils-4.1 package;
 other versions may differ slightly.
+.SH "SEE ALSO"
+.BR dircolors (1),
+.BR ls (1),
+.BR stty (1),
+.BR xterm (1)

man5/elf.5

@@ -1445,6 +1445,23 @@ relocation entries to fixup these addresses.
 Array containing all the dynamic structures in the .dynamic section.
 This is automatically populated by the linker.
 .El
+.Sh HISTORY
+.Ox
+ELF support first appeared in
+.Ox 1.2 ,
+although not all supported platforms use it as the native
+binary file format.
+ELF in itself first appeared in
+.At V .
+The ELF format is an adopted standard.
+.Sh AUTHORS
+The original version of this manual page was written by
+.An Jeroen Ruigrok van der Werven
+.Aq asmodai@FreeBSD.org
+with inspiration from BSDi's
+.Bsx
+.Nm elf
+manpage.
 .Sh SEE ALSO
 .Xr as 1 ,
 .Xr gdb 1 ,
@@ -1465,20 +1482,3 @@ This is automatically populated by the linker.
 .%T Object Files
 .%B "Executable and Linking Format (ELF)"
 .Re
-.Sh HISTORY
-.Ox
-ELF support first appeared in
-.Ox 1.2 ,
-although not all supported platforms use it as the native
-binary file format.
-ELF in itself first appeared in
-.At V .
-The ELF format is an adopted standard.
-.Sh AUTHORS
-The original version of this manual page was written by
-.An Jeroen Ruigrok van der Werven
-.Aq asmodai@FreeBSD.org
-with inspiration from BSDi's
-.Bsx
-.Nm elf
-manpage.

man5/proc.5

@@ -1745,6 +1745,19 @@ This is useful for analysing virtual memory behaviour.
 .\" FIXME more should be said about /proc/zoneinfo
 .RE
 .RE
+.SH NOTES
+Many strings (i.e., the environment and command line) are in
+the internal format, with sub-fields terminated by null bytes ('\\0'),
+so you
+may find that things are more readable if you use \fIod \-c\fP or \fItr
+"\\000" "\\n"\fP to read them.
+Alternatively, \fIecho `cat <file>`\fP works well.
+
+This manual page is incomplete, possibly inaccurate, and is the kind
+of thing that needs to be updated very often.
+.\" .SH ACKNOWLEDGEMENTS
+.\" The material on /proc/sys/fs and /proc/sys/kernel is closely based on
+.\" kernel source documentation files written by Rik van Riel.
 .SH "SEE ALSO"
 .BR cat (1),
 .BR find (1),
@@ -1771,16 +1784,3 @@ This is useful for analysing virtual memory behaviour.
 .BR route (8)
 .br
 .I /usr/src/linux/Documentation/filesystems/proc.txt
-.SH CAVEATS
-Note that many strings (i.e., the environment and command line) are in
-the internal format, with sub-fields terminated by null bytes ('\\0'),
-so you
-may find that things are more readable if you use \fIod \-c\fP or \fItr
-"\\000" "\\n"\fP to read them.
-Alternatively, \fIecho `cat <file>`\fP works well.
-
-This manual page is incomplete, possibly inaccurate, and is the kind
-of thing that needs to be updated very often.
-.SH ACKNOWLEDGEMENTS
-The material on /proc/sys/fs and /proc/sys/kernel is closely based on
-kernel source documentation files written by Rik van Riel.

man7/ascii.7

@@ -151,13 +151,6 @@ Standards Institute (USASI) in 1968.
 .\" American National Standards Institute (ANSI) in 1969 and is the
 .\" U.S. member body of ISO; private and non-profit.
 .\"
-.SH "SEE ALSO"
-.BR iso_8859-1 (7),
-.BR iso_8859-15 (7),
-.BR iso_8859-16 (7),
-.BR iso_8859-2 (7),
-.BR iso_8859-7 (7),
-.BR iso_8859-9 (7)
 .SH TABLES
 For convenience, let us give more compact tables in hex and decimal.
 .sp
@@ -181,3 +174,10 @@ D: \- = M ] m }
 E: . > N ^ n ~
 F: / ? O _ o DEL
 .fi
+.SH "SEE ALSO"
+.BR iso_8859-1 (7),
+.BR iso_8859-15 (7),
+.BR iso_8859-16 (7),
+.BR iso_8859-2 (7),
+.BR iso_8859-7 (7),
+.BR iso_8859-9 (7)

man7/mdoc.samples.7

@@ -2863,10 +2863,6 @@ template for writing a man page
 .It Pa /usr/share/examples/mdoc/*
 several example man pages
 .El
-.Sh SEE ALSO
-.Xr man 1 ,
-.Xr troff 1 ,
-.Xr mdoc 7
 .Sh BUGS
 Undesirable hyphenation on the dash of a flag
 argument is not yet resolved, and causes
@@ -2936,3 +2932,7 @@ and certainly should be able to.
 .\" .Xr nroff
 .\" the right margin adjustment is normally ragged and the problem is
 .\" not as severe.
+.Sh SEE ALSO
+.Xr man 1 ,
+.Xr troff 1 ,
+.Xr mdoc 7

man7/regex.7

@@ -241,10 +241,6 @@ matched by the \fId\fRth parenthesized subexpression
 (numbering subexpressions by the positions of their opening parentheses,
 left to right),
 so that (e.g.) `\e([bc]\e)\e1' matches `bb' or `cc' but not `bc'.
-.SH "SEE ALSO"
-.BR regex (3)
-.PP
-POSIX.2, section 2.8 (Regular Expression Notation).
 .SH BUGS
 Having two kinds of REs is a botch.
 .PP
@@ -268,3 +264,7 @@ is current consensus among implementors as to the right interpretation.
 The syntax for word boundaries is incredibly ugly.
 .\" .SH AUTHOR
 .\" This page was taken from Henry Spencer's regex package.
+.SH "SEE ALSO"
+.BR regex (3)
+.PP
+POSIX.2, section 2.8 (Regular Expression Notation).

man7/x25.7

@@ -106,6 +106,8 @@ interface are not binary compatible.
 X.25 N-Reset events are not propagated to the user process yet.
 Thus,
 if a reset occurred, data might be lost without notice.
+.SH VERSIONS
+The PF_X25 protocol family is a new feature of Linux 2.2.
 .SH "SEE ALSO"
 .BR socket (2),
 .BR socket (7)
@@ -116,5 +118,3 @@ The URL is
 .RS
 .I ftp://ftp.pspt.fi/pub/ham/linux/ax25/x25doc.tgz
 .RE
-.SH VERSIONS
-The PF_X25 protocol family is a new feature of Linux 2.2.