diff --git a/man4/console_codes.4 b/man4/console_codes.4
index 925dd7a78..8f95543a5 100644
--- a/man4/console_codes.4
+++ b/man4/console_codes.4
@@ -38,7 +38,7 @@ If the console is in UTF-8 mode, then the incoming bytes are
 first assembled into 16-bit Unicode codes.
 Otherwise each byte is transformed according to the current mapping table
 (which translates it to a Unicode value).
-See the \fBCHARACTER SETS\fP section below for discussion.
+See the \fBCharacter Sets\fP section below for discussion.
 .LP
 In the normal case, the Unicode value is converted to a font index,
 and this is stored in video memory, so that the corresponding glyph
@@ -51,7 +51,7 @@ currently processing an escape sequence, the value will treated
 specially.
 Instead of being turned into a font index and rendered as
 a glyph, it may trigger cursor movement or other control functions.
-See the \fBLINUX CONSOLE CONTROLS\fP section below for discussion.
+See the \fBLinux Console Controls\fP section below for discussion.
 .LP
 It is generally not good practice to hard-wire terminal controls into
 programs.
@@ -407,7 +407,8 @@ The bitmap that corresponds to
 s is found in the character ROM, and can be changed using
 .BR setfont (8).
 .SS "Mouse Tracking"
-The mouse tracking facility is intended to return xterm-compatible
+The mouse tracking facility is intended to return
+.BR (1)xterm (1)-compatible
 mouse status reports.
 Because the console driver has no way to know
 the device or type of the mouse, these reports are returned in the
@@ -419,7 +420,7 @@ user-mode application such as the
 daemon.
 .PP
 The mouse tracking escape sequences generated by
-\fIxterm\fP encode numeric parameters in a single character as
+\fBxterm\fP(1) encode numeric parameters in a single character as
 \fIvalue\fP+040.
 For example, \(aq!\(aq is 1.
 The screen coordinate system is 1-based.
@@ -427,7 +428,7 @@ The screen coordinate system is 1-based.
 The X10 compatibility mode sends an escape sequence on button press
 encoding the location and the mouse button pressed.
 It is enabled by sending ESC [ ? 9 h and disabled with ESC [ ? 9 l.
-On button press, \fIxterm\fP sends
+On button press, \fBxterm\fP(1) sends
 ESC [ M \fIbxy\fP (6 characters).
 Here \fIb\fP is button\-1,
 and \fIx\fP and \fIy\fP are the x and y coordinates of the mouse
@@ -439,7 +440,7 @@ sequence on both button press and release.
 Modifier information is also sent.
 It is enabled by sending ESC [ ? 1000 h and disabled with
 ESC [ 1000 l.
-On button press or release, \fIxterm\fP sends ESC [ M
+On button press or release, \fBxterm\fP(1) sends ESC [ M
 \fIbxy\fP.
 The low two bits of \fIb\fP encode button information:
 0=MB1 pressed, 1=MB2 pressed, 2=MB3 pressed, 3=release.
@@ -472,7 +473,7 @@ all codes except XOFF and XON.
 VT100-like DC1/DC3 processing may be enabled by the tty driver.
 .LP
 The
-.I xterm
+.BR xterm (1)
 program (in VT100 mode) recognizes the control characters
 BEL, BS, HT, LF, VT, FF, CR, SO, SI, ESC.
 .\"
@@ -495,7 +496,7 @@ ESC + ...		Designate G3 character set
 .TE
 .PP
 The program
-.I xterm
+.BR xterm (1)
 (in VT100 mode) recognizes ESC c, ESC # 8, ESC >, ESC =,
 ESC D, ESC E, ESC H, ESC M, ESC N, ESC O, ESC P ... ESC \,
 ESC Z (it answers ESC [ ? 1 ; 2 c, "I am a VT100 with
@@ -505,14 +506,14 @@ It accepts ESC (, ESC ), ESC *,  ESC + followed by 0, A, B for
 the DEC special character and line drawing set, UK, and US-ASCII,
 respectively.
 .PP
-The user can configure \fIxterm\fP to respond to VT220-specific
+The user can configure \fBxterm\fP(1) to respond to VT220-specific
 control sequences, and it will identify itself as a VT52, VT100, and
 up depending on the way it is configured and initialized.
 .PP
 It accepts ESC ] (OSC) for the setting of certain resources.
 In addition to the ECMA-48 string terminator (ST),
-\fIxterm\fP accepts a BEL to terminate an OSC string.
-These are a few of the OSC control sequences recognized by \fIxterm\fP:
+\fBxterm\fP(1) accepts a BEL to terminate an OSC string.
+These are a few of the OSC control sequences recognized by \fBxterm\fP(1):
 .TS
 l l.
 ESC ] 0 ; \fItxt\fP ST	Set icon name and window title to \fItxt\fP.
@@ -537,7 +538,7 @@ It also recognizes
 .TS
 l l l.
 ESC F		Cursor to lower left corner of screen (if enabled by
-		\fIxterm\fP's \fBhpLowerleftBugCompat\fP resource)
+		\fBxterm\fP(1)'s \fBhpLowerleftBugCompat\fP resource)
 ESC l		Memory lock (per HP terminals).
 		Locks memory above the cursor.
 ESC m		Memory unlock (per HP terminals).
@@ -554,7 +555,7 @@ implementation than Linux console.
 .PP
 .B CSI Sequences
 .sp
-Old versions of \fIxterm\fP, for example, from X11R5,
+Old versions of \fBxterm\fP(1), for example, from X11R5,
 interpret the blink SGR as a bold SGR.
 Later versions which implemented ANSI colors, for example,
 XFree86 3.1.2A in 1995, improved this by allowing
@@ -565,13 +566,13 @@ Stock X11R6 versions did not recognize the color-setting SGRs until
 the X11R6.8 release, which incorporated XFree86 xterm.
 All ECMA-48 CSI sequences recognized by Linux are also recognized by
 .IR xterm ,
-however \fIxterm\fP implements several ECMA-48 and DEC control sequences
+however \fBxterm\fP(1) implements several ECMA-48 and DEC control sequences
 not recognized by Linux.
 .PP
-The \fIxterm\fP
+The \fBxterm\fP(1)
 program recognizes all of the DEC Private Mode sequences listed
 above, but none of the Linux private-mode sequences.
-For discussion of \fIxterm\fP's
+For discussion of \fBxterm\fP(1)'s
 own private-mode sequences, refer to the
 \fIXterm Control Sequences\fP
 document by
@@ -595,7 +596,7 @@ http://invisible-island.net/vttest/
 .in
 .PP
 demonstrates many of these control sequences.
-The \fIxterm\fP source distribution also contains sample
+The \fBxterm\fP(1) source distribution also contains sample
 scripts which exercise other features.
 .SH NOTES
 ESC 8 (DECRC) is not able to restore the character set changed with
@@ -618,15 +619,15 @@ for private mode control sequences.
 In particular, those ending with ] do not use a standard terminating
 character.
 The OSC (set palette) sequence is a greater problem,
-since \fIxterm\fP may interpret this as a control sequence
+since \fBxterm\fP(1) may interpret this as a control sequence
 which requires a string terminator (ST).
-Unlike the \fIsetterm\fP sequences which will be ignored (since
+Unlike the \fBsetterm\fP(1) sequences which will be ignored (since
 they are invalid control sequences), the palette sequence will make
-\fIxterm\fP appear to hang (though pressing the return-key
+\fBxterm\fP(1) appear to hang (though pressing the return-key
 will fix that).
 To accommodate applications which have been hardcoded to use Linux
 control sequences,
-set the \fIxterm\fP resource \fBbrokenLinuxOSC\fP to true.
+set the \fBxterm\fP(1) resource \fBbrokenLinuxOSC\fP to true.
 .PP
 An older version of this document implied that Linux recognizes the
 ECMA-48 control sequence for invisible text.