2008-10-25 03:03:47 +00:00
|
|
|
.\" Copyright (c) 2008 Linux Foundation, written by Michael Kerrisk
|
|
|
|
|
.\" <mtk.manpages@gmail.com>
|
|
|
|
|
.\"
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: s/LICENSE_START(verbatim)/LICENSE_START(VERBATIM)/
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:29:01 +00:00
|
|
|
.\" %%%LICENSE_START(VERBATIM)
|
2008-10-25 03:03:47 +00:00
|
|
|
.\" Permission is granted to make and distribute verbatim copies of this
|
|
|
|
|
.\" manual provided the copyright notice and this permission notice are
|
|
|
|
|
.\" preserved on all copies.
|
|
|
|
|
.\"
|
|
|
|
|
.\" Permission is granted to copy and distribute modified versions of this
|
|
|
|
|
.\" manual under the conditions for verbatim copying, provided that the
|
|
|
|
|
.\" entire resulting derived work is distributed under the terms of a
|
|
|
|
|
.\" permission notice identical to this one.
|
|
|
|
|
.\"
|
|
|
|
|
.\" Since the Linux kernel and libraries are constantly changing, this
|
|
|
|
|
.\" manual page may be incorrect or out-of-date. The author(s) assume no
|
|
|
|
|
.\" responsibility for errors or omissions, or for damages resulting from
|
|
|
|
|
.\" the use of the information contained herein. The author(s) may not
|
|
|
|
|
.\" have taken the same level of care in the production of this manual,
|
|
|
|
|
.\" which is licensed free of charge, as they might when working
|
|
|
|
|
.\" professionally.
|
|
|
|
|
.\"
|
|
|
|
|
.\" Formatted or processed versions of this manual, if unaccompanied by
|
|
|
|
|
.\" the source, must acknowledge the copyright and authors of this work.
|
intro.1, _exit.2, access.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bind.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, delete_module.2, dup.2, execve.2, exit_group.2, faccessat.2, fchmodat.2, fchownat.2, fcntl.2, fork.2, fstatat.2, fsync.2, futimesat.2, get_robust_list.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getpagesize.2, getpid.2, getresuid.2, getrlimit.2, getrusage.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, idle.2, init_module.2, intro.2, iopl.2, kcmp.2, kexec_load.2, kill.2, link.2, linkat.2, llseek.2, lookup_dcookie.2, madvise.2, mincore.2, mkdirat.2, mknodat.2, mmap.2, mmap2.2, mount.2, mprotect.2, mq_getsetattr.2, msgctl.2, msgget.2, msgop.2, msync.2, nice.2, open.2, openat.2, pause.2, perfmonctl.2, personality.2, pipe.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, quotactl.2, read.2, readahead.2, readdir.2, readlinkat.2, readv.2, reboot.2, recvmmsg.2, remap_file_pages.2, rename.2, renameat.2, rmdir.2, rt_sigqueueinfo.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, sendmmsg.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setresuid.2, setuid.2, setup.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, splice.2, stat.2, statfs.2, stime.2, subpage_prot.2, swapon.2, symlink.2, symlinkat.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysfs.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, times.2, tkill.2, umask.2, umount.2, uname.2, unlink.2, unlinkat.2, uselib.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, abort.3, abs.3, acos.3, acosh.3, adjtime.3, aio_init.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, byteorder.3, bzero.3, catgets.3, catopen.3, cbrt.3, ceil.3, clearenv.3, clock.3, clock_getcpuclockid.3, closedir.3, confstr.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dprintf.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, end.3, endian.3, erf.3, erfc.3, ether_aton.3, euidaccess.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fmod.3, fnmatch.3, fopencookie.3, fpathconf.3, fpurge.3, frexp.3, fseeko.3, ftok.3, futimes.3, gcvt.3, get_nprocs_conf.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getenv.3, getfsent.3, getgrent.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwnam.3, getrpcent_r.3, gets.3, getservent.3, getservent_r.3, getumask.3, getusershell.3, getutmp.3, getw.3, glob.3, gnu_get_libc_version.3, gsignal.3, hypot.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_ntop.3, inet_pton.3, infnan.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, j0.3, ldexp.3, localeconv.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, memset.3, mkdtemp.3, mkfifo.3, mkfifoat.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, on_exit.3, opendir.3, posix_fallocate.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, putenv.3, putpwent.3, puts.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, re_comp.3, readdir.3, realpath.3, regex.3, remainder.3, remove.3, resolver.3, rewinddir.3, rint.3, round.3, scalb.3, scalbln.3, scandir.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setenv.3, setlocale.3, setlogmask.3, shm_open.3, siginterrupt.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdio_ext.3, stpcpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfry.3, strftime.3, string.3, strlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, trunc.3, tsearch.3, ttyslot.3, tzset.3, ulimit.3, undocumented.3, unlocked_stdio.3, usleep.3, y0.3, cpuid.4, full.4, initrd.4, mouse.4, msr.4, sd.4, st.4, acct.5, core.5, services.5, slabinfo.5, aio.7, capabilities.7, credentials.7, feature_test_macros.7, hier.7, inotify.7, libc.7, locale.7, man-pages.7, man.7, math_error.7, mq_overview.7, numa.7, path_resolution.7, pipe.7, pthreads.7, pty.7, rtld-audit.7, sem_overview.7, shm_overview.7, sigevent.7, signal.7, suffixes.7, svipc.7, termio.7, time.7, udplite.7, units.7, uri.7, sln.8: Global fix: Add LICENSE_START(verbatim)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2013-03-10 09:28:40 +00:00
|
|
|
.\" %%%LICENSE_END
|
2008-10-25 03:03:47 +00:00
|
|
|
.\"
|
getent.1, iconv.1, ldd.1, locale.1, localedef.1, memusage.1, memusagestat.1, pldd.1, sprof.1, time.1, _syscall.2, accept.2, add_key.2, adjtimex.2, bind.2, bpf.2, capget.2, chown.2, chroot.2, clock_getres.2, clone.2, connect.2, copy_file_range.2, epoll_ctl.2, epoll_wait.2, eventfd.2, fanotify_init.2, fanotify_mark.2, fcntl.2, fsync.2, futex.2, getcpu.2, getdents.2, getgid.2, getgroups.2, getpid.2, gettid.2, gettimeofday.2, getuid.2, getxattr.2, inotify_add_watch.2, inotify_init.2, ioctl_fat.2, ioctl_ns.2, ioctl_userfaultfd.2, ioprio_set.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, madvise.2, memfd_create.2, migrate_pages.2, mount.2, mprotect.2, mremap.2, msgctl.2, msgop.2, nfsservctl.2, open_by_handle_at.2, perf_event_open.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, readahead.2, readdir.2, readlink.2, reboot.2, recvmmsg.2, removexattr.2, rename.2, request_key.2, s390_guarded_storage.2, s390_runtime_instr.2, s390_sthyi.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, seccomp.2, select.2, select_tut.2, semctl.2, sendmmsg.2, set_thread_area.2, setgid.2, setns.2, setuid.2, setxattr.2, shmctl.2, sigaction.2, signalfd.2, sigsuspend.2, socket.2, socketpair.2, spu_run.2, stat.2, statx.2, subpage_prot.2, syscalls.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, vmsplice.2, write.2, CPU_SET.3, __ppc_get_timebase.3, alloca.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bsd_signal.3, bstring.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, cmsg.3, confstr.3, ctermid.3, ctime.3, des_crypt.3, dl_iterate_phdr.3, dlinfo.3, dlsym.3, duplocale.3, end.3, endian.3, errno.3, exec.3, exit.3, ferror.3, fgetws.3, fmemopen.3, fnmatch.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isatty.3, iswblank.3, iswspace.3, lockf.3, makecontext.3, mallinfo.3, malloc.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, putenv.3, qsort.3, rand.3, random.3, readdir.3, regex.3, resolver.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcmp.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, system.3, termios.3, trunc.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, xcrypt.3, console_codes.4, dsp56k.4, full.4, initrd.4, lirc.4, loop.4, st.4, tty.4, vcs.4, charmap.5, core.5, host.conf.5, locale.5, proc.5, repertoiremap.5, resolv.conf.5, termcap.5, tmpfs.5, tzfile.5, aio.7, capabilities.7, cgroup_namespaces.7, cgroups.7, charsets.7, complex.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, locale.7, man-pages.7, man.7, namespaces.7, pid_namespaces.7, pkeys.7, pthreads.7, rtld-audit.7, sched.7, signal.7, sock_diag.7, socket.7, tcp.7, udp.7, unicode.7, user_namespaces.7, utf-8.7, zdump.8, zic.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-03-06 14:11:03 +00:00
|
|
|
.TH PTHREAD_GETATTR_NP 3 2019-03-06 "Linux" "Linux Programmer's Manual"
|
2008-10-25 03:03:47 +00:00
|
|
|
.SH NAME
|
|
|
|
|
pthread_getattr_np \- get attributes of created thread
|
|
|
|
|
.SH SYNOPSIS
|
|
|
|
|
.nf
|
accept.2, clone.2, dup.2, fallocate.2, pipe.2, readahead.2, sched_setaffinity.2, unshare.2, CPU_SET.3, endian.3, euidaccess.3, fexecve.3, getpt.3, getpw.3, getumask.3, getutmp.3, gnu_get_libc_version.3, makedev.3, matherr.3, mbsnrtowcs.3, memfrob.3, pthread_attr_setaffinity_np.3, pthread_getattr_np.3, pthread_setaffinity_np.3, pthread_tryjoin_np.3, tcgetsid.3, wcscasecmp.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wcswidth.3, rtld-audit.7: SYNOPSIS: Add reference to feature_test_macros(7)
These pages specify feature test macros in the function
prototypes. Add a reference to feature_test_macros(7),
so that readers are pointed to the information that
feature test macros must be defined before including
*any* header file.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-09-10 05:06:22 +00:00
|
|
|
.BR "#define _GNU_SOURCE" " /* See feature_test_macros(7) */"
|
2008-10-25 03:03:47 +00:00
|
|
|
.B #include <pthread.h>
|
_exit.2, accept.2, chmod.2, dup.2, getgroups.2, keyctl.2, link.2, mkdir.2, mknod.2, pipe.2, poll.2, reboot.2, rename.2, select.2, select_tut.2, stat.2, symlink.2, unlink.2, __ppc_get_timebase.3, abs.3, bzero.3, crypt.3, dbopen.3, dl_iterate_phdr.3, dlinfo.3, dlsym.3, duplocale.3, encrypt.3, err.3, ffs.3, fpurge.3, ftw.3, getdate.3, gethostbyname.3, getlogin.3, getmntent.3, getpwent_r.3, getpwnam.3, getspnam.3, inet_pton.3, insque.3, isfdtype.3, mallinfo.3, mallopt.3, matherr.3, mcheck.3, mempcpy.3, mkfifo.3, mq_getattr.3, newlocale.3, open_memstream.3, openpty.3, perror.3, posix_memalign.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setaffinity_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, regex.3, resolver.3, rpmatch.3, rtnetlink.3, scanf.3, setbuf.3, strchr.3, strfromd.3, strverscmp.3, termios.3, tsearch.3, unlocked_stdio.3, updwtmp.3, netlink.7, rtld-audit.7, sock_diag.7, unix.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 15:44:09 +00:00
|
|
|
.PP
|
2008-10-25 03:03:47 +00:00
|
|
|
.BI "int pthread_getattr_np(pthread_t " thread ", pthread_attr_t *" attr );
|
_exit.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chroot.2, clock_getres.2, clock_nanosleep.2, close.2, connect.2, create_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, exit_group.2, fanotify_mark.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, ioctl.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_tty.2, ioperm.2, iopl.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_mempolicy.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shutdown.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, sync.2, sysctl.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, difftime.3, dirfd.3, div.3, dlerror.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, erf.3, erfc.3, err.3, errno.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, infnan.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, newlocale.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, y0.3, dsp56k.4, random.4, rtc.4, st.4, ddp.7, ip.7, ipv6.7, packet.7, rtnetlink.7, socket.7, tcp.7, udp.7, udplite.7, x25.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-15 15:16:29 +00:00
|
|
|
.PP
|
2008-10-25 03:03:47 +00:00
|
|
|
Compile and link with \fI\-pthread\fP.
|
add_key.2, keyctl.2, request_key.2, offsetof.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_equal.3, pthread_exit.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_testcancel.3: Global formatting fix: balance .nf/.fi pairs
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-03-12 15:37:22 +00:00
|
|
|
.fi
|
2008-10-25 03:03:47 +00:00
|
|
|
.SH DESCRIPTION
|
|
|
|
|
The
|
|
|
|
|
.BR pthread_getattr_np ()
|
|
|
|
|
function initializes the thread attributes object referred to by
|
|
|
|
|
.I attr
|
|
|
|
|
so that it contains actual attribute values describing the running thread
|
|
|
|
|
.IR thread .
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2008-10-25 03:03:47 +00:00
|
|
|
The returned attribute values may differ from
|
|
|
|
|
the corresponding attribute values passed in the
|
|
|
|
|
.I attr
|
|
|
|
|
object that was used to create the thread using
|
|
|
|
|
.BR pthread_create (3).
|
|
|
|
|
In particular, the following attributes may differ:
|
|
|
|
|
.IP * 2
|
|
|
|
|
the detach state, since a joinable thread may have detached itself
|
|
|
|
|
after creation;
|
|
|
|
|
.IP *
|
|
|
|
|
the stack size,
|
|
|
|
|
which the implementation may align to a suitable boundary.
|
|
|
|
|
.IP *
|
|
|
|
|
and the guard size,
|
Changes.old, clone.2, execve.2, fcntl.2, futex.2, getitimer.2, getpriority.2, mmap.2, mount.2, mprotect.2, sched_setscheduler.2, select_tut.2, setuid.2, sigaltstack.2, vfork.2, div.3, fenv.3, fmod.3, memchr.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_getattr_np.3, queue.3, scanf.3, trunc.3, st.4, proc.5, services.5, utmp.5, bootparam.7, capabilities.7, feature_test_macros.7, futex.7, glob.7, man.7, netlink.7, unicode.7: Switch to American usage: "-wards" ==> "-ward"
American English uses "afterward" in preference to "afterwards",
and so on
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-09-26 05:34:47 +00:00
|
|
|
which the implementation may round upward to a multiple of the page size,
|
2008-10-25 03:03:47 +00:00
|
|
|
or ignore (i.e., treat as 0),
|
|
|
|
|
if the application is allocating its own stack.
|
|
|
|
|
.PP
|
|
|
|
|
Furthermore, if the stack address attribute was not set
|
|
|
|
|
in the thread attributes object used to create the thread,
|
|
|
|
|
then the returned thread attributes object will report the actual
|
|
|
|
|
stack address that the implementation selected for the thread.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2008-10-25 03:03:47 +00:00
|
|
|
When the thread attributes object returned by
|
|
|
|
|
.BR pthread_getattr_np ()
|
|
|
|
|
is no longer required, it should be destroyed using
|
|
|
|
|
.BR pthread_attr_destroy (3).
|
|
|
|
|
.SH RETURN VALUE
|
|
|
|
|
On success, this function returns 0;
|
intro.1, time.1, adjtimex.2, capget.2, eventfd.2, fcntl.2, getrlimit.2, getsockopt.2, gettimeofday.2, intro.2, ioctl_list.2, ioperm.2, mlock.2, pivot_root.2, poll.2, prctl.2, ptrace.2, sched_setscheduler.2, select_tut.2, semget.2, sigaltstack.2, signalfd.2, sysctl.2, timer_settime.2, timerfd_create.2, wait.2, CPU_SET.3, argz_add.3, assert_perror.3, atexit.3, backtrace.3, bcmp.3, clearenv.3, ctime.3, dl_iterate_phdr.3, dlopen.3, ecvt.3, errno.3, error.3, ether_aton.3, exit.3, fenv.3, ferror.3, finite.3, flockfile.3, fnmatch.3, fpathconf.3, fpclassify.3, ftime.3, ftok.3, ftw.3, fwide.3, getaddrinfo.3, gethostbyname.3, getlogin.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getrpcent.3, getservent.3, glob.3, hsearch.3, inet.3, isalpha.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, longjmp.3, lsearch.3, malloc.3, matherr.3, mblen.3, mbsinit.3, mbtowc.3, on_exit.3, printf.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_equal.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setschedparam.3, pthread_setschedprio.3, ptsname.3, putenv.3, putgrent.3, raise.3, rcmd.3, regex.3, rexec.3, rpc.3, rpmatch.3, rtnetlink.3, scandir.3, sem_init.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, signbit.3, stdio_ext.3, strtod.3, strtol.3, strtoul.3, system.3, termios.3, timeradd.3, tzset.3, ualarm.3, wctomb.3, xdr.3, st.4, tty_ioctl.4, core.5, elf.5, proc.5, bootparam.7, capabilities.7, icmp.7, ip.7, ipv6.7, math_error.7, mdoc.samples.7, mq_overview.7, pthreads.7, raw.7, regex.7, socket.7, tcp.7, tzselect.8: Global fix: s/non-zero/nonzero/
The tendency in English, as prescribed in style guides like
Chicago MoS, is towards removing hyphens after prefixes
like "non-" etc.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-01-16 16:40:55 +00:00
|
|
|
on error, it returns a nonzero error number.
|
2008-10-25 03:03:47 +00:00
|
|
|
.SH ERRORS
|
|
|
|
|
.TP
|
|
|
|
|
.B ENOMEM
|
|
|
|
|
.\" Can happen (but unlikely) while trying to allocate memory for cpuset
|
|
|
|
|
Insufficient memory.
|
|
|
|
|
.PP
|
|
|
|
|
In addition, if
|
|
|
|
|
.I thread
|
|
|
|
|
refers to the main thread, then
|
|
|
|
|
.BR pthread_getattr_np ()
|
2008-11-18 12:04:59 +00:00
|
|
|
can fail because of errors from various underlying calls:
|
2008-10-25 03:03:47 +00:00
|
|
|
.BR fopen (3),
|
|
|
|
|
if
|
|
|
|
|
.IR /proc/self/maps
|
|
|
|
|
can't be opened;
|
|
|
|
|
and
|
|
|
|
|
.BR getrlimit (2),
|
|
|
|
|
if the
|
|
|
|
|
.BR RLIMIT_STACK
|
|
|
|
|
resource limit is not supported.
|
|
|
|
|
.SH VERSIONS
|
|
|
|
|
This function is available in glibc since version 2.2.3.
|
2015-05-27 10:13:01 +00:00
|
|
|
.SH ATTRIBUTES
|
|
|
|
|
For an explanation of the terms used in this section, see
|
|
|
|
|
.BR attributes (7).
|
ctime.3, error.3, getmntent.3, getnetent_r.3, getrpcent_r.3, getservent_r.3, pthread_attr_init.3, pthread_getattr_np.3, pthread_tryjoin_np.3, rpc.3, setaliasent.3, setenv.3, unlocked_stdio.3: srcfix: Eliminate some groff warnings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-06-24 15:19:21 +00:00
|
|
|
.ad l
|
2015-05-27 10:13:01 +00:00
|
|
|
.TS
|
|
|
|
|
allbox;
|
ctime.3, error.3, getmntent.3, getnetent_r.3, getrpcent_r.3, getservent_r.3, pthread_attr_init.3, pthread_getattr_np.3, pthread_tryjoin_np.3, rpc.3, setaliasent.3, setenv.3, unlocked_stdio.3: srcfix: Eliminate some groff warnings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-06-24 15:19:21 +00:00
|
|
|
lbw20 lb lb
|
2015-05-27 10:13:01 +00:00
|
|
|
l l l.
|
|
|
|
|
Interface Attribute Value
|
|
|
|
|
T{
|
|
|
|
|
.BR pthread_getattr_np ()
|
|
|
|
|
T} Thread safety MT-Safe
|
|
|
|
|
.TE
|
ctime.3, error.3, getmntent.3, getnetent_r.3, getrpcent_r.3, getservent_r.3, pthread_attr_init.3, pthread_getattr_np.3, pthread_tryjoin_np.3, rpc.3, setaliasent.3, setenv.3, unlocked_stdio.3: srcfix: Eliminate some groff warnings
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2016-06-24 15:19:21 +00:00
|
|
|
.ad
|
2008-10-25 03:03:47 +00:00
|
|
|
.SH CONFORMING TO
|
2010-09-09 06:07:04 +00:00
|
|
|
This function is a nonstandard GNU extension;
|
execve.2, fallocate.2, futex.2, sched_rr_get_interval.2, select_tut.2, shmget.2, timer_getoverrun.2, times.2, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_cleanup_push_defer_np.3, pthread_getattr_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_tryjoin_np.3, sem_open.3, stdin.3, rtc.4, tty_ioctl.4, unix.7: Global fix: s/non-portable/nonportable/
The tendency in English, as prescribed in style guides like
Chicago MoS, is towards removing hyphens after prefixes
like "non-" etc.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2010-01-16 16:46:09 +00:00
|
|
|
hence the suffix "_np" (nonportable) in the name.
|
2008-10-25 03:03:47 +00:00
|
|
|
.SH EXAMPLE
|
|
|
|
|
The program below demonstrates the use of
|
|
|
|
|
.BR pthread_getattr_np ().
|
|
|
|
|
The program creates a thread that then uses
|
|
|
|
|
.BR pthread_getattr_np ()
|
|
|
|
|
to retrieve and display its guard size, stack address,
|
|
|
|
|
and stack size attributes.
|
|
|
|
|
Command-line arguments can be used to set these attributes
|
|
|
|
|
to values other than the default when creating the thread.
|
|
|
|
|
The shell sessions below demonstrate the use of the program.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2008-10-25 03:03:47 +00:00
|
|
|
In the first run, on an x86-32 system,
|
|
|
|
|
a thread is created using default attributes:
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2008-10-25 03:03:47 +00:00
|
|
|
.in +4n
|
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:52:46 +00:00
|
|
|
.EX
|
arch_prctl.2, ioctl_fideduperange.2, ioctl_getfsmap.2, kexec_load.2, madvise.2, mbind.2, mmap.2, mmap2.2, mprotect.2, perf_event_open.2, process_vm_readv.2, set_mempolicy.2, shmget.2, subpage_prot.2, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, regex.3, wavelan.4, filesystems.5, proc.5, bootparam.7, raw.7, tcp.7, units.7, ld.so.8: Add a non-breaking space between a number and a unit (prefix)
Based on a patch by Bjarni Ingi Gislason.
According to SI, ""The numerical value always precedes the unit,
and a space is always used to separate the unit from the number
[...] The only exceptions to this rule are for the unit symbols
for degree, minute, and second for plane angle."
Cowritten-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 10:12:59 +00:00
|
|
|
.RB "$" " ulimit \-s" " # No stack limit ==> default stack size is 2 MB"
|
2008-10-25 03:03:47 +00:00
|
|
|
unlimited
|
eventfd.2, execve.2, getdents.2, ioprio_set.2, mprotect.2, signalfd.2, timerfd_create.2, wait.2, backtrace.3, clock_getcpuclockid.3, end.3, fmemopen.3, fopencookie.3, frexp.3, getdate.3, getgrouplist.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, inet.3, inet_pton.3, makecontext.3, malloc.3, matherr.3, offsetof.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, sem_wait.3, strftime.3, strtok.3, strtol.3, core.5, proc.5, cpuset.7, mq_overview.7: Global fix: Format user input in shell sessions in boldface
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-28 15:37:22 +00:00
|
|
|
.RB "$" " ./a.out"
|
2008-10-25 03:03:47 +00:00
|
|
|
Attributes of created thread:
|
|
|
|
|
Guard size = 4096 bytes
|
|
|
|
|
Stack address = 0x40196000 (EOS = 0x40397000)
|
|
|
|
|
Stack size = 0x201000 (2101248) bytes
|
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:52:46 +00:00
|
|
|
.EE
|
2008-10-25 03:03:47 +00:00
|
|
|
.in
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2008-10-25 03:03:47 +00:00
|
|
|
In the following run, we see that if a guard size is specified,
|
|
|
|
|
it is rounded up to the next multiple of the system page size
|
|
|
|
|
(4096 bytes on x86-32):
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2008-10-25 03:03:47 +00:00
|
|
|
.in +4n
|
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:52:46 +00:00
|
|
|
.EX
|
eventfd.2, execve.2, getdents.2, ioprio_set.2, mprotect.2, signalfd.2, timerfd_create.2, wait.2, backtrace.3, clock_getcpuclockid.3, end.3, fmemopen.3, fopencookie.3, frexp.3, getdate.3, getgrouplist.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, inet.3, inet_pton.3, makecontext.3, malloc.3, matherr.3, offsetof.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, sem_wait.3, strftime.3, strtok.3, strtol.3, core.5, proc.5, cpuset.7, mq_overview.7: Global fix: Format user input in shell sessions in boldface
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-28 15:37:22 +00:00
|
|
|
.RB "$" " ./a.out \-g 4097"
|
2008-10-25 03:03:47 +00:00
|
|
|
Thread attributes object after initializations:
|
|
|
|
|
Guard size = 4097 bytes
|
|
|
|
|
Stack address = (nil)
|
|
|
|
|
Stack size = 0x0 (0) bytes
|
|
|
|
|
|
|
|
|
|
Attributes of created thread:
|
|
|
|
|
Guard size = 8192 bytes
|
|
|
|
|
Stack address = 0x40196000 (EOS = 0x40397000)
|
|
|
|
|
Stack size = 0x201000 (2101248) bytes
|
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:52:46 +00:00
|
|
|
.EE
|
2008-10-25 03:03:47 +00:00
|
|
|
.in
|
|
|
|
|
.\".in +4n
|
|
|
|
|
.\".nf
|
|
|
|
|
.\"$ ./a.out \-s 0x8000
|
|
|
|
|
.\"Thread attributes object after initializations:
|
|
|
|
|
.\" Guard size = 4096 bytes
|
|
|
|
|
.\" Stack address = 0xffff8000 (EOS = (nil))
|
|
|
|
|
.\" Stack size = 0x8000 (32768) bytes
|
|
|
|
|
.\"
|
|
|
|
|
.\"Attributes of created thread:
|
|
|
|
|
.\" Guard size = 4096 bytes
|
|
|
|
|
.\" Stack address = 0x4001e000 (EOS = 0x40026000)
|
|
|
|
|
.\" Stack size = 0x8000 (32768) bytes
|
|
|
|
|
.\".fi
|
|
|
|
|
.\".in
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2008-10-25 03:03:47 +00:00
|
|
|
In the last run, the program manually allocates a stack for the thread.
|
|
|
|
|
In this case, the guard size attribute is ignored.
|
CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, clearenv.3, clock.3, clog.3, clog10.3, clog2.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, euidaccess.3, exec.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 03:13:02 +00:00
|
|
|
.PP
|
2008-10-25 03:03:47 +00:00
|
|
|
.in +4n
|
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:52:46 +00:00
|
|
|
.EX
|
eventfd.2, execve.2, getdents.2, ioprio_set.2, mprotect.2, signalfd.2, timerfd_create.2, wait.2, backtrace.3, clock_getcpuclockid.3, end.3, fmemopen.3, fopencookie.3, frexp.3, getdate.3, getgrouplist.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, inet.3, inet_pton.3, makecontext.3, malloc.3, matherr.3, offsetof.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, sem_wait.3, strftime.3, strtok.3, strtol.3, core.5, proc.5, cpuset.7, mq_overview.7: Global fix: Format user input in shell sessions in boldface
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-28 15:37:22 +00:00
|
|
|
.RB "$" " ./a.out \-g 4096 \-s 0x8000 \-a"
|
2008-10-25 03:03:47 +00:00
|
|
|
Allocated thread stack at 0x804d000
|
|
|
|
|
|
|
|
|
|
Thread attributes object after initializations:
|
|
|
|
|
Guard size = 4096 bytes
|
|
|
|
|
Stack address = 0x804d000 (EOS = 0x8055000)
|
|
|
|
|
Stack size = 0x8000 (32768) bytes
|
|
|
|
|
|
|
|
|
|
Attributes of created thread:
|
|
|
|
|
Guard size = 0 bytes
|
|
|
|
|
Stack address = 0x804d000 (EOS = 0x8055000)
|
|
|
|
|
Stack size = 0x8000 (32768) bytes
|
execve.2, ioctl_console.2, ioctl_iflags.2, ioctl_ns.2, ioctl_userfaultfd.2, kcmp.2, kexec_load.2, keyctl.2, link.2, listxattr.2, membarrier.2, memfd_create.2, mmap.2, modify_ldt.2, mprotect.2, msgctl.2, nanosleep.2, open_by_handle_at.2, perf_event_open.2, poll.2, posix_fadvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, readdir.2, readv.2, recv.2, recvmmsg.2, request_key.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setscheduler.2, seccomp.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendmmsg.2, set_thread_area.2, setns.2, shmctl.2, shmget.2, sigaction.2, sigaltstack.2, signal.2, sigwaitinfo.2, stat.2, statfs.2, statx.2, sync_file_range.2, syscall.2, sysctl.2, sysinfo.2, tee.2, timer_create.2, timer_settime.2, timerfd_create.2, unshare.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vmsplice.2, wait.2, adjtime.3, aio_init.3, backtrace.3, basename.3, bswap.3, btree.3, clock_getcpuclockid.3, cmsg.3, confstr.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlinfo.3, dlopen.3, duplocale.3, encrypt.3, end.3, endian.3, err.3, errno.3, ether_aton.3, fgetgrent.3, fgetpwent.3, fmemopen.3, frexp.3, ftime.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, getifaddrs.3, getipnodebyname.3, getmntent.3, getnameinfo.3, getnetent.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getservent.3, getservent_r.3, getspnam.3, getttyent.3, glob.3, gnu_get_libc_version.3, hash.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isalpha.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, memchr.3, mq_getattr.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, ntp_gettime.3, posix_openpt.3, printf.3, pthread_attr_init.3, pthread_attr_setschedparam.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_tryjoin_np.3, readdir.3, realpath.3, recno.3, regex.3, rpc.3, scanf.3, sched_getcpu.3, sem_wait.3, setaliasent.3, sigqueue.3, statvfs.3, strcat.3, strcpy.3, strftime.3, strtok.3, strtol.3, strverscmp.3, toupper.3, ttyslot.3, xdr.3, fuse.4, loop.4, rtc.4, st.4, acct.5, core.5, elf.5, slabinfo.5, aio.7, arp.7, capabilities.7, cgroup_namespaces.7, cgroups.7, ddp.7, fanotify.7, feature_test_macros.7, inode.7, inotify.7, ip.7, keyrings.7, locale.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, packet.7, pkeys.7, pthreads.7, sched.7, session-keyring.7, sock_diag.7, socket.7, spufs.7, udplite.7, unix.7, user_namespaces.7, vdso.7, x25.7, ld.so.8: Use consistent markup for code snippets
Change .nf/.fi to .EX/.EE
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-18 19:52:46 +00:00
|
|
|
.EE
|
2008-10-25 03:03:47 +00:00
|
|
|
.in
|
eventfd.2, getdents.2, mprotect.2, signalfd.2, timerfd_create.2, wait.2, backtrace.3, clock_getcpuclockid.3, end.3, fmemopen.3, fopencookie.3, getdate.3, getgrouplist.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, inet.3, inet_pton.3, makecontext.3, matherr.3, offsetof.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, sem_wait.3, strtol.3, core.5: global fix: Add ".SS Program source" to EXAMPLE
Add ".SS Program source" to clearly distinguish shell session and
descriptive text from actual program code.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-10-28 15:51:05 +00:00
|
|
|
.SS Program source
|
eventfd.2, getdents.2, mprotect.2, signalfd.2, timerfd_create.2, wait.2, backtrace.3, clock_getcpuclockid.3, end.3, fmemopen.3, fopencookie.3, frexp.3, getaddrinfo.3, getdate.3, getgrouplist.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, inet.3, inet_pton.3, makecontext.3, matherr.3, offsetof.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, sem_wait.3, strftime.3, strtok.3, strtol.3, core.5: srcfix
s/\.R " "/\\\&/ as a way of getting a blank line after a .SS heading.
(Suggested by Sam Varshavchik <mrsam@courier-mta.com>)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2008-11-05 01:42:45 +00:00
|
|
|
\&
|
memusage.1, clone.2, eventfd.2, futex.2, getdents.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, keyctl.2, mmap.2, mprotect.2, msgop.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, setns.2, tee.2, timer_create.2, timerfd_create.2, unshare.2, userfaultfd.2, wait.2, __ppc_get_timebase.3, backtrace.3, bswap.3, clock_getcpuclockid.3, dl_iterate_phdr.3, dlinfo.3, dlopen.3, duplocale.3, end.3, endian.3, fmemopen.3, fopencookie.3, frexp.3, ftw.3, getdate.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, mq_getattr.3, mq_notify.3, newlocale.3, offsetof.3, posix_spawn.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, scandir.3, sem_wait.3, strcat.3, strftime.3, strtok.3, strtol.3, strverscmp.3, loop.4, core.5, aio.7, fanotify.7, feature_test_macros.7, inotify.7, pkeys.7, unix.7, user_namespaces.7: Use .EX/.EE for EXAMPLE programs
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 08:44:33 +00:00
|
|
|
.EX
|
2008-10-25 03:03:47 +00:00
|
|
|
#define _GNU_SOURCE /* To get pthread_getattr_np() declaration */
|
|
|
|
|
#include <pthread.h>
|
|
|
|
|
#include <stdio.h>
|
|
|
|
|
#include <stdlib.h>
|
|
|
|
|
#include <unistd.h>
|
|
|
|
|
#include <errno.h>
|
|
|
|
|
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
#define handle_error_en(en, msg) \e
|
2008-11-11 13:35:25 +00:00
|
|
|
do { errno = en; perror(msg); exit(EXIT_FAILURE); } while (0)
|
2008-10-25 03:03:47 +00:00
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
display_stack_related_attributes(pthread_attr_t *attr, char *prefix)
|
|
|
|
|
{
|
|
|
|
|
int s;
|
|
|
|
|
size_t stack_size, guard_size;
|
|
|
|
|
void *stack_addr;
|
|
|
|
|
|
|
|
|
|
s = pthread_attr_getguardsize(attr, &guard_size);
|
|
|
|
|
if (s != 0)
|
2008-11-11 13:35:25 +00:00
|
|
|
handle_error_en(s, "pthread_attr_getguardsize");
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("%sGuard size = %d bytes\en", prefix, guard_size);
|
2008-10-25 03:03:47 +00:00
|
|
|
|
|
|
|
|
s = pthread_attr_getstack(attr, &stack_addr, &stack_size);
|
|
|
|
|
if (s != 0)
|
2008-11-11 13:35:25 +00:00
|
|
|
handle_error_en(s, "pthread_attr_getstack");
|
2008-10-25 03:03:47 +00:00
|
|
|
printf("%sStack address = %p", prefix, stack_addr);
|
|
|
|
|
if (stack_size > 0)
|
|
|
|
|
printf(" (EOS = %p)", (char *) stack_addr + stack_size);
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("\en");
|
|
|
|
|
printf("%sStack size = 0x%x (%d) bytes\en",
|
2008-10-25 03:03:47 +00:00
|
|
|
prefix, stack_size, stack_size);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
display_thread_attributes(pthread_t thread, char *prefix)
|
|
|
|
|
{
|
|
|
|
|
int s;
|
|
|
|
|
pthread_attr_t attr;
|
|
|
|
|
|
|
|
|
|
s = pthread_getattr_np(thread, &attr);
|
|
|
|
|
if (s != 0)
|
2008-11-11 13:35:25 +00:00
|
|
|
handle_error_en(s, "pthread_getattr_np");
|
2008-10-25 03:03:47 +00:00
|
|
|
|
|
|
|
|
display_stack_related_attributes(&attr, prefix);
|
|
|
|
|
|
|
|
|
|
s = pthread_attr_destroy(&attr);
|
|
|
|
|
if (s != 0)
|
2008-11-11 13:35:25 +00:00
|
|
|
handle_error_en(s, "pthread_attr_destroy");
|
2008-10-25 03:03:47 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void * /* Start function for thread we create */
|
|
|
|
|
thread_start(void *arg)
|
|
|
|
|
{
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("Attributes of created thread:\en");
|
|
|
|
|
display_thread_attributes(pthread_self(), "\et");
|
2008-10-25 03:03:47 +00:00
|
|
|
|
|
|
|
|
exit(EXIT_SUCCESS); /* Terminate all threads */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
usage(char *pname, char *msg)
|
|
|
|
|
{
|
|
|
|
|
if (msg != NULL)
|
|
|
|
|
fputs(msg, stderr);
|
ldd.1, execve.2, getdents.2, quotactl.2, select_tut.2, clock_getcpuclockid.3, fopencookie.3, getservent_r.3, matherr.3, mq_notify.3, pthread_create.3, pthread_getattr_np.3, wordexp.3: Global fix: s/-/\\-/ when real hyphen is required (e.g., in code)
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-08-29 10:04:28 +00:00
|
|
|
fprintf(stderr, "Usage: %s [\-s stack\-size [\-a]]"
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
" [\-g guard\-size]\en", pname);
|
|
|
|
|
fprintf(stderr, "\et\et\-a means program should allocate stack\en");
|
2008-10-25 03:03:47 +00:00
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static pthread_attr_t * /* Get thread attributes from command line */
|
|
|
|
|
get_thread_attributes_from_cl(int argc, char *argv[],
|
|
|
|
|
pthread_attr_t *attrp)
|
|
|
|
|
{
|
|
|
|
|
int s, opt, allocate_stack;
|
|
|
|
|
long stack_size, guard_size;
|
|
|
|
|
void *stack_addr;
|
|
|
|
|
pthread_attr_t *ret_attrp = NULL; /* Set to attrp if we initialize
|
|
|
|
|
a thread attributes object */
|
|
|
|
|
allocate_stack = 0;
|
|
|
|
|
stack_size = \-1;
|
|
|
|
|
guard_size = \-1;
|
|
|
|
|
|
|
|
|
|
while ((opt = getopt(argc, argv, "ag:s:")) != \-1) {
|
|
|
|
|
switch (opt) {
|
2008-11-06 16:44:25 +00:00
|
|
|
case \(aqa\(aq: allocate_stack = 1; break;
|
|
|
|
|
case \(aqg\(aq: guard_size = strtoul(optarg, NULL, 0); break;
|
|
|
|
|
case \(aqs\(aq: stack_size = strtoul(optarg, NULL, 0); break;
|
2008-10-25 03:03:47 +00:00
|
|
|
default: usage(argv[0], NULL);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (allocate_stack && stack_size == \-1)
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
usage(argv[0], "Specifying \-a without \-s makes no sense\en");
|
2008-10-25 03:03:47 +00:00
|
|
|
|
|
|
|
|
if (argc > optind)
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
usage(argv[0], "Extraneous command\-line arguments\en");
|
2008-10-25 03:03:47 +00:00
|
|
|
|
|
|
|
|
if (stack_size >= 0 || guard_size > 0) {
|
|
|
|
|
ret_attrp = attrp;
|
|
|
|
|
|
|
|
|
|
s = pthread_attr_init(attrp);
|
|
|
|
|
if (s != 0)
|
2008-11-11 13:35:25 +00:00
|
|
|
handle_error_en(s, "pthread_attr_init");
|
2008-10-25 03:03:47 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (stack_size >= 0) {
|
|
|
|
|
if (!allocate_stack) {
|
|
|
|
|
s = pthread_attr_setstacksize(attrp, stack_size);
|
|
|
|
|
if (s != 0)
|
2008-11-11 13:35:25 +00:00
|
|
|
handle_error_en(s, "pthread_attr_setstacksize");
|
2008-10-25 03:03:47 +00:00
|
|
|
} else {
|
|
|
|
|
s = posix_memalign(&stack_addr, sysconf(_SC_PAGESIZE),
|
|
|
|
|
stack_size);
|
|
|
|
|
if (s != 0)
|
2008-11-11 13:35:25 +00:00
|
|
|
handle_error_en(s, "posix_memalign");
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("Allocated thread stack at %p\en\en", stack_addr);
|
2008-10-25 03:03:47 +00:00
|
|
|
|
|
|
|
|
s = pthread_attr_setstack(attrp, stack_addr, stack_size);
|
|
|
|
|
if (s != 0)
|
2008-11-11 13:35:25 +00:00
|
|
|
handle_error_en(s, "pthread_attr_setstacksize");
|
2008-10-25 03:03:47 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (guard_size >= 0) {
|
|
|
|
|
s = pthread_attr_setguardsize(attrp, guard_size);
|
|
|
|
|
if (s != 0)
|
2008-11-11 13:35:25 +00:00
|
|
|
handle_error_en(s, "pthread_attr_setstacksize");
|
2008-10-25 03:03:47 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return ret_attrp;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
main(int argc, char *argv[])
|
|
|
|
|
{
|
|
|
|
|
int s;
|
|
|
|
|
pthread_t thr;
|
|
|
|
|
pthread_attr_t attr;
|
|
|
|
|
pthread_attr_t *attrp = NULL; /* Set to &attr if we initialize
|
|
|
|
|
a thread attributes object */
|
|
|
|
|
|
|
|
|
|
attrp = get_thread_attributes_from_cl(argc, argv, &attr);
|
|
|
|
|
|
|
|
|
|
if (attrp != NULL) {
|
locale.1, memusage.1, pldd.1, _syscall.2, add_key.2, bind.2, bpf.2, chown.2, clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2019-02-27 11:57:17 +00:00
|
|
|
printf("Thread attributes object after initializations:\en");
|
|
|
|
|
display_stack_related_attributes(attrp, "\et");
|
|
|
|
|
printf("\en");
|
2008-10-25 03:03:47 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
s = pthread_create(&thr, attrp, &thread_start, NULL);
|
|
|
|
|
if (s != 0)
|
2008-11-11 13:35:25 +00:00
|
|
|
handle_error_en(s, "pthread_create");
|
2008-10-25 03:03:47 +00:00
|
|
|
|
|
|
|
|
if (attrp != NULL) {
|
|
|
|
|
s = pthread_attr_destroy(attrp);
|
|
|
|
|
if (s != 0)
|
2008-11-11 13:35:25 +00:00
|
|
|
handle_error_en(s, "pthread_attr_destroy");
|
2008-10-25 03:03:47 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pause(); /* Terminates when other thread calls exit() */
|
|
|
|
|
}
|
memusage.1, clone.2, eventfd.2, futex.2, getdents.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, keyctl.2, mmap.2, mprotect.2, msgop.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, setns.2, tee.2, timer_create.2, timerfd_create.2, unshare.2, userfaultfd.2, wait.2, __ppc_get_timebase.3, backtrace.3, bswap.3, clock_getcpuclockid.3, dl_iterate_phdr.3, dlinfo.3, dlopen.3, duplocale.3, end.3, endian.3, fmemopen.3, fopencookie.3, frexp.3, ftw.3, getdate.3, getgrouplist.3, getifaddrs.3, getprotoent_r.3, getservent_r.3, gnu_get_libc_version.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, makecontext.3, mallinfo.3, malloc_info.3, mallopt.3, matherr.3, mbstowcs.3, mcheck.3, mq_getattr.3, mq_notify.3, newlocale.3, offsetof.3, posix_spawn.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, scandir.3, sem_wait.3, strcat.3, strftime.3, strtok.3, strtol.3, strverscmp.3, loop.4, core.5, aio.7, fanotify.7, feature_test_macros.7, inotify.7, pkeys.7, unix.7, user_namespaces.7: Use .EX/.EE for EXAMPLE programs
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2017-08-16 08:44:33 +00:00
|
|
|
.EE
|
2008-10-25 03:03:47 +00:00
|
|
|
.SH SEE ALSO
|
sched_get_priority_max.2, sched_setparam.2, sched_setaffinity.2, sched_setscheduler.2, timer_create.2, malloc.3, pthread_attr_init.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_getattr_np.3, pthread_cancel.3, pthread_create.3, pthread_setschedparam.3, pthread_setschedprio.3, aio.7, time.7: Global ffix: disable justification and hyphenation in SEE ALSO
For a better visual result, disable justification and hyphenation
in SEE ALSO where page names are long.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
2012-09-25 04:34:17 +00:00
|
|
|
.ad l
|
|
|
|
|
.nh
|
2008-10-25 03:03:47 +00:00
|
|
|
.BR pthread_attr_getaffinity_np (3),
|
|
|
|
|
.BR pthread_attr_getdetachstate (3),
|
|
|
|
|
.BR pthread_attr_getguardsize (3),
|
|
|
|
|
.BR pthread_attr_getinheritsched (3),
|
|
|
|
|
.BR pthread_attr_getschedparam (3),
|
|
|
|
|
.BR pthread_attr_getschedpolicy (3),
|
|
|
|
|
.BR pthread_attr_getscope (3),
|
|
|
|
|
.BR pthread_attr_getstack (3),
|
|
|
|
|
.BR pthread_attr_getstackaddr (3),
|
|
|
|
|
.BR pthread_attr_getstacksize (3),
|
|
|
|
|
.BR pthread_attr_init (3),
|
|
|
|
|
.BR pthread_create (3),
|
|
|
|
|
.BR pthreads (7)
|