From 80bf282397070cd0db18e8bcb4dcc80096868415 Mon Sep 17 00:00:00 2001
From: Jason Leschnik <jason@leschnik.me>
Date: Mon, 24 Oct 2016 22:35:41 +1100
Subject: [PATCH] fix minor typos in Ethernet-HOWTO.sgml

---
 LDP/howto/linuxdoc/Ethernet-HOWTO.sgml | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/LDP/howto/linuxdoc/Ethernet-HOWTO.sgml b/LDP/howto/linuxdoc/Ethernet-HOWTO.sgml
index 493e18af..72da46f8 100644
--- a/LDP/howto/linuxdoc/Ethernet-HOWTO.sgml
+++ b/LDP/howto/linuxdoc/Ethernet-HOWTO.sgml
@@ -1781,7 +1781,7 @@ SA PROM 0x10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	packets, and thus can handle larger bursts of
 	back-to-back packets without dropping packets.
 	This in turn means that the card does not require as low
-	a latency from the the host computer with respect to pulling
+	a latency from the host computer with respect to pulling
 	the packets out of the buffer to avoid dropping packets.
 
 	Most 8 bit cards have an 8kB buffer, and most 16 bit cards have
@@ -2096,7 +2096,7 @@ SA PROM 0x10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	media setting, so you <em/have/ to select 10Base-T or
 	10Base-2 or AUI.
 	Note that if you turn off PnP entirely, you should exit the
-	utility and  and then follow that with a hard
+	utility and then follow that with a hard
 	reset to ensure that the new settings take effect.
 
 	Some people ask about the ``Server or Workstation'' and ``Highest
@@ -2826,7 +2826,7 @@ SA PROM 0x10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 <p>
 	Status: Supported, Driver Name: de620
 
-	Similar to the the DE-600, only with two output formats.
+	Similar to the DE-600, only with two output formats.
 	See the above information on the DE-600.
 
 <sect2>DE-650<label id="de-650">
@@ -3785,7 +3785,7 @@ SA PROM 0x10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 	<tt>8139too</tt> in recent kernels.
 
 	In older kernels, the driver was called <tt>rtl8139</tt> 
-	and you generally had to to answer `Y' when asked if you want 
+	and you generally had to answer `Y' when asked if you want 
 	experimental drivers to get access to this driver. 
 
 <sect1>Sager