From 778fb0b66748b9ef6928754f7ccba2f55ff92359 Mon Sep 17 00:00:00 2001 From: Jason Leschnik Date: Mon, 24 Oct 2016 21:19:32 +1100 Subject: [PATCH] fix minor typos in Net-HOWTO.sgml --- LDP/howto/docbook/Net-HOWTO/Net-HOWTO.sgml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/LDP/howto/docbook/Net-HOWTO/Net-HOWTO.sgml b/LDP/howto/docbook/Net-HOWTO/Net-HOWTO.sgml index e2694aaf..6a88e28e 100644 --- a/LDP/howto/docbook/Net-HOWTO/Net-HOWTO.sgml +++ b/LDP/howto/docbook/Net-HOWTO/Net-HOWTO.sgml @@ -3319,7 +3319,7 @@ After compiling and installing your kernel with IP_Alias support, configuration is very simple. The aliases are added to virtual network devices associated with the actual network device. A simple naming convention applies to these devices being <devname>:<virtual -dev num>, e.g. eth0:0, ppp0:10 etc. Note that the the +dev num>, e.g. eth0:0, ppp0:10 etc. Note that the ifname:number device can only be configured after the main interface has been set up. @@ -4497,7 +4497,7 @@ for the given object. If you do not give a command, the default command will be assumed. Typically the -default command is to list the objects.If the the objects can not be listed, the default will +default command is to list the objects. If the objects can not be listed, the default will provide standard help output. @@ -5809,7 +5809,7 @@ either the ethernet encapsulation packet format or the RFC1051 packet format. Once you have your kernel properly built to support your ethernet card, then -configuring the the card is easy. +configuring the card is easy. Typically you would use something like: